Vision Spec Sheet
It’s like having
FOUR systems in ONE!
V-LED 1
V-LCD 1
‘Turn on the security system’
Now it’s as easy as A, B, C. Just select the area you wish to secure and press ‘On’. Vision, with its ‘Point & Click’ design,
stands out as the easy to understand, easy to use, security system.
QUAD KEY
AREA ARMING
Vision’s Quad Key shows each part of the system and makes
security as easy as A, B, C. Customers understand Vision
and appreciate its simplicity. Vision’s Keep It Simple design
makes it everyone’s first choice for security.
Zone Groups can arm & disarm together (like partitions). Area
arming gives ‘point & click’ operation of up to 4 preset arming
configurations and eliminates the need for routine bypassing
of windows or doors.
THREE ARMING METHODS
OUTDOOR ZONES
Select Mode, Zone Type, or Area Arming; it’s your choice,
whichever is best for your customer.
Outdoor detectors integrate directly to Vision, taking you
beyond traditional ‘interior-only’ security systems.
8 Zone Security Control System
Quad Key...for EZ partial Arming
Select the arming method which best suits the user’s needs:
- Area Arming, for Outside, Garage, Living Room
- Mode Arming, for Away, Home, Night
- Zone Type Arming, for Doors, Windows, Interior, Exterior
Ready
Trouble
Chime
A
B
DOORS
WINDOWS
INTERIOR
EXTERIOR
C
1Ready
Test
2
Memory
Fire ACTrouble
3
4
Bypass
5
6
Memory Bypass
D
1
7
2
Enter Code
ON
Reset
Trouble
Enter
3
OFF
4
Program
5
A
DOORS
Utility
INTERIOR
8
9
Quick
7
Clear
0
#
6
8
C
B
WINDOWS
Chime
Reset
1
2
3
Memory
Trouble
Bypass
4
EXTERIOR
D
6
7
8
9
Quick
Clear
0
#
OFF
On Key for EZ Arm
Just select arming area(s) and press ‘On’ to arm. You can also arm the entire
system by pressing ‘On’ for two seconds
Utility
Enter
Enter Code
ON
5
Program
Test
Off Key for EZ Disarm
Pressing ‘Off’ silences the entry tone for 15 seconds, reducing confusion and
distraction during the disarming process..
Enter Code LED for EZ Operation
Lights when a User PIN is required to proceed.
V-LCD1
V-LED1
Programming Power
♦
♦
♦
♦
♦
♦
♦
Advanced Performance
4 built-in templates virtually eliminate programming.
Download quickly with virtually any modem.
Direct connect programming to on-site computer.
Field programmer holds up to 4 programs (optional).
Zones configure independently for greater flexibility.
SIA and Contact ID formats.
Installer’s Walk-Test and Communicator Test.
♦
♦
♦
♦
♦
♦
On-site serial printer interface.
Bell Circuit & Telephone Circuit Supervision.
100 event memory buffer.
3 programmable output terminals, with options that include
Keyswitch Arming & Tamper Input.
Automatic Daylight Savings Time adjustment.
Double EOL Zone type
User Friendly Options
Ordering Information:
Exterior Zones integrate Outdoor Protection.
♦ Night By-Pass Zones for easy ‘at-home’ arming.
♦ Up-Arm to add more areas without disarming.
♦ Quick Exit and Arm Without Delay options
♦ Report-To-Pager reporting.
♦ Personal Alarm Call reporting.
♦ PGM Activation with or without PIN.
♦ Annunciator Chime selectable by zone.
V-CP1 LED*
Includes control panel, cabinet, and LED keypad.
V-CP1 LCD*
Includes control panel, cabinet, and LCD keypad.
V-LED1*
LED keypad for Vision control
V-LCD1*
LCD Keypad for Vision control
V-RPU DOS
Remote Programming Utility (DOS)
V-RPU WIN
Remote Programming Utility (Windows)
* add (S) after part number for Spanish version
♦
Specifications
Hardware ( V-PCB1/V-LED&V-LCD )
PIN Codes
16.5V AC
User codes
8*
*User #08 can be programmed as a temporary PIN code
V-CP
1
1
1
1
k
Lin
Number of Zones
Total 8
Main board
6
Keypad
2
Programmable In/Out* 1 Input+2 Outputs or 3 Outputs
Data Link
ta
Da
Zones & Programmable In/Out
Telephone Line
Data Link
*Each programmable ouput cannot exceed 50mA
Number of Keypads
Max. 4 units per system
Dimensions/Current Draw
W × H × T mm/mA
V-LED 1 Keypad
147 × 84 × 22mm/55mA
V-LCD 1 Keypad
147 ×120 × 22mm/65mA
V-PCB 1 Main Board
191 × 73mm/100mA
Serial port
Serial printer, DPU or RPU
Utility code
Installer code
Duress code
Call RPU code
Lin
k(
On
ew
ay
)
12V DC, Total 1A
Da
ta
Power
Outputs
Auxiliary Power
Bell/Siren
Programmable*
Modem
Personal
Computer
Serial Printer
*1 output can be programmed as 2 wire smoke detector
Direct
Programming
Utility
OPTEX INCORPORATED
1845 W. 205th St. Torrance, Ca. 90501-1510 U.S.A.
TEL(310)533-1500 TOLL FREE (800) 966-7839 FAX(310)533-5910
OPTEX CO., LTD. (ISO 9001 Certified by LRQA)
4-7-5 Nionohama Otsu, 520-0801 Japan
TEL(077)524-6047 FAX(077)522-9022
OPTEX (EUROPE) LTD. (ISO 9002 Certified by NQA)
Clivemont Road, Cordwallis Park, Maidenhead, Berkshire, SL6 7BU U.K.
TEL(01628)631000 FAX(01628)636311
No. 75046-00-5130-0002
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement