Прессы и сопутствующие продукты

Прессы и сопутствующие продукты
MANUAL 12 TON
XRF BRIQUETTING PRESS
®
MANUAL 12 TON FORCE SPECTROPRESS HYDRAULIC PRESS
HOME
30 TON
AUTOMATIC
PRESS WITH
SELECTIVE DIE
SIZE OPTIONS
30 TON
AUTOMATIC
PRESS WITH
INTEGRATED
DIE OF CHOICE
BRIQUETTING
DIES
SPECTROPELLET
FILM
DIE
CONDITIONER
PELLETCUPS
BRIQUETTING
ADDITIVES
FOR XRF and IR SAMPLE BRIQUETTING
Compact contemporary designed manual press
delivers 12 tons of force. It incorporates an
innovatively engineered platen that accepts,
aligns and self-centers optionally available 13, 32,
35, 40 and 45 mm Chemplex® stainless steel
dies; 13mm dies are used for IR applications.
Large accessible area facilitates fast and easy die
removal and reinsertion. The stainless steel dies
are designed to accept Chemplex® compressible
tapered PelletCups® briquetting cups.
Long 20” (51 cm) pumping handle with rubber grip
facilitates pumping. Pressure release control
rapidly retracts ram. Analog gauge indicates 0 to
12 tons in 0.4 ton increments; includes mounting
holes for improved stability.
Unique two post design provides easy
access from all directions
The platen, or die platform, is uniquely designed to accept Chemplex 13, 32, 35,
40 and 45 mm evacuable stainless steel die sets. The platen incorporates a
series of stepped counter bores that serve to accommodate, self-center and
secure the respective die sizes in position. It is important that the die is placed
completely within the confines of a counterbore. The use and applications of
another die brand presents the potential possibility of misfit, endangerment and
damage to the machine.
Unique platen accepts
all Chemplex die sizes
SPECIFICATIONS AND ORDERING INFORMATION
CAT NO
DESCRIPTION
4312
Manual 12 Ton Force SpectroPress® Hydraulic Press
DIMENSIONS/WEIGHT
14” long x 12” deep x 20” high (35.5 x 30.5 x 50.9 cm)
102 lbs (46.3 kg)
® SpectroPress, PelletCups and Chemplex are registered trademarks of Chemplex Industries, Inc.
Chemplex® INDUSTRIES, INC.
2820 SW 42nd Avenue
Palm City, Fl. 34990-5573, USA
Continental USA Toll Free: (800) 4-CHEMPLEX
Phone: (772) 283-2700
Fax: (772) 283-2774
On Line Sales: http://www.chemplex.com
Email: [email protected]
AUTOMATIC 30 TON
XRF BRIQUETTING
PRESSES
AUTOMATIC 30 TON FORCE STANDARD SPECTROPRESS® HYDRAULIC
PRESS WITH CHOICE OF DIE SIZE OPTION
HOME
BACK TO 12 TON
MANUAL PRESS
FORWARD TO
AUTOMATIC 30
TON PRESS WITH
INTEGRATED DIE
OF CHOICE
BRIQUETTING DIES
SPECTROPELLET
FILM
DIE CONDITIONER
PELLETCUPS
BRIQUETTING
ADDITIVES
Simple two button operation for briquetting,
decompression and sample pellet ejection. Depress
“Up” button for briquetting until desired force in tons is
attained as indicated on the analog gauge. Analog
gauge indicates force in one ton increments up to 30
tons.
For applying dwell time, discontinue depressing the
“Up” button at the desired pressure for a timed interval
before
depressing
the
“Down”
button
for
decompression and PelletCups® sample briquette
removals. Amazing fast ram travel speed expedites
briquetting samples for XRF analysis.
Spindle with large knurled knob adapts to any
Knurled knob adjusts to height of die
conventional die height. Self-centering and self-aligning
set.
die feature integrated in the ram platform accepts
optionally available 32, 35, 40 and 45 mm evacuable
stainless steel dies. Small compact design allows
Unique Platen
counter-top installations. Illuminated working chamber Automatically Accepts,
Self-Centers and
(on some models) improves visibility.
Secures Die Sets in
Position
Dimensions:
Weight:
14.5” long x 14.5” wide x 18.5” high (37 cm x 37 cm x 18.5 cm)
210 lbs (94.5 kg)
FEATURES AT A GLANCE
∎ Exceptional fast ram response time
∎ Self-centers Chemplex 32, 35, 40 and 45mm dies on innovative designed platen
∎ Simple two button operation; ram up and ram down
∎ High visibility analog gauge indicates tons in one ton increments up to 30 tons
∎ Knurled-knob spindle adjusts to accommodate variable die heights
∎ Quiet counter top operation
∎ Functions best with recommended use of PelletCups® tapered briquetting cups
Simple Two Button Operation:
Ram Up and Ram Down
∎ Illuminated working chamber on some models
SPECIFICATIONS AND ORDERING INFORMATION
CAT NO
DESCRIPTION
OPTIONALLY AVAILABLE DIE SETS
30 Ton Force Automatic
Cat. No: 4030 (32 mm); 4038 (35 mm); 4040 (40mm); 4047 (45 mm)
Standard SpectroPress® System
Specify electrical requirements. 115 VAC/60 HZ or 230 VAC/50, 60 HZ.
4325
® SpectroPress, PelletCups and Chemplex are registered trademarks of Chemplex Industries, Inc
Chemplex® INDUSTRIES, INC.
2820 SW 42nd Ave., Palm City, Fl. 34990-5573, USA
Continental USA Toll Free: (800) 4-CHEMPLEX Phone: (772) 283-2700 • Fax: (772) 283-2774
On Line Sales: http://www.chemplex.com
Email: [email protected]
AUTOMATIC 30 TON
XRF BRIQUETTING PRESS
WITH INTEGRATED DIE
®
AUTOMATIC 30 TON FORCE SPECTROPRESS HYDRAULIC PRESS INCLUDES
INTEGRATED DIE SIZE OF CHOICE
HOME
BACK TO 12 TON
MANUAL PRESS
BACK T0 30 TON
AUTOMATIC
SPECTROPRESS
WITH SELECTIVE
DIE SIZE OPTIONS
BRIQUETTING DIES
SPECTROPELLET
FILM
DIE CONDITIONER
PELLETCUPS
BRIQUETTING
ADDITIVES
A user selected die size is included with this Automatic 30 Ton
SpectroPress model. For laboratories briquetting the same
diameter size XRF pellets, this model will perform with amazing
speed, ease, convenience and reproducibility. To insert a
powdered sample or remove the sample briquette, die removal
is completely eliminated by means of an innovative electro fluid
hydraulic mechanical design.
Two momentary buttons control the operation for briquetting,
decompression and sample pellet ejection. Depressing the “Up”
button raises the ram and the “Down” button retracts the ram.
Analog gauge indicates force in one ton increments up to 30
tons.
For optionally applying dwell time, discontinue depressing the
“Up” button at the desired pressure for a timed interval before
depressing the “Down” button for decompression and pellet
removal.
Includes choice of a 32, 35
or 40 mm Evacuable
Chemplex Die Set
Small compact design is ideal for counter top operation. All
integrated dies accept the recommended Chemplex TaperedWalled PelletCups® Briquetting Cups. Illuminated working
chamber (on some models) improves visibility.
FAST, EASY AND CONVENIENT TO USE
1. Place powdered sample in Compressible Tapered PelletCups® briquetting cups on ram.
2. Depress “Down” button until PelletCups briquetting cup is retracted for Briquetting Cap insertion.Integrated Die Simplifies
Briquetting; no need to
3. Insert stainless steel Briquetting Cap over the PelletCups briquetting cup within the die body.
remove and disassemble
4. Rotate Anvil completely forward over the Briquetting Cap.
the die set to extract the
5. Depress “Up” button until desired force indicated in tons is attained.
sample pellet.
6. If dwell is required remove pressure applied to “Up” button for a timed interval.
7. Depress “Down” button to retract the ram.
8. Rotate Anvil completely to its backward position.
9. Depress “Up” button to extract Briquetting Cap and briquetted pellet in preparation
for introducing another sample.
Dimensions:
Weight:
14.5” long x 14.5” wide x 18.5” high (37cm x 37cm x 18.5cm)
210 lbs (94.5 kg)
SPECIFICATIONS AND ORDERING INFORMATION
CAT NO
DESCRIPTION
INCLUDES ONE OF THE LISTED CHEMPLEX DIE SETS
30 Ton Force Automatic
SpectroPress® Hydraulic Press
Cat. No: 43032 (32 mm); 43035 (35 mm); 43040 (40 mm)
with Integrated Die of Choice
Specify electrical requirements. 115 VAC/60 HZ or 230 VAC/50, 60 HZ.
® SpectroPress, PelletCups and Chemplex are registered trademarks of Chemplex Industries, Inc.
4335
Chemplex® INDUSTRIES, INC.
2820 SW 42nd Avenue, Palm City, Fl. 34990-5573, USA
Phone: (772) 283-2700 • Fax: (772) 283-2774
Email: [email protected]
On Line Sales: http://www.chemplex.com
XRF BRIQUETTING
DIE SETS
EVACUABLE STAINLESS STEEL BRIQUETTING DIE SETS
HOME
BACK TO 12 TON
MANUAL PRESS
BACK TO 30 TON
AUTOMATIC
SPECTROPRESS
WITH SELECTIVE
DIE SIZE OPTIONS
BACK TO 30 TON
AUTOMATIC
SPECTROPRESS
WITH INTEGRATED
DIE OF CHOICE
SPECTROPELLET
FILM
DIE CONDITIONER
PELLETCUPS
BRIQUETTING
ADDITIVES
AQUEOUS
GRINDING AND
BRIQUETTING
ADDITIVE
Chemplex die sets are fabricated “in-house” from a quality
grade of stainless steel. They are annealed to a Rockwell “C”
hardness of at least 45 to minimize abrasion and potential
damage attributed to the effects of contact to very hard sample
particles that normally would score the inside diameters of the
bodies. Close tolerance precision grinding ensures perfect
compatibility with:
• Stainless pellets supplied with the die sets and optionally available tungsten
carbide pellets
• Compressible tapered briquetting PelletCups® and PlastiCups™ briquetting cups
• Chemplex Manual and Automatic Standard SpectroPress® Systems featured
with self-centering and aligning die set containment features.
• Each die is fitted with a fluted side-arm for a firm connection to an evacuation
source during the briquetting process to remove extraneous air entrapment.
• Appropriate “O” rings are included to ensure sealing during the evacuation
procedure.
• A similarly designed 13 mm diameter evacuable die set is available for
briquetting powdered samples for IR analysis.
Warning: Do Not Exceed the Maximum Load
13mm Evacuable Die
Set for IR Analysis
and Sample
Preparations
SPECIFICATIONS AND ORDERING INFORMATION
Evacuable Stainless Steel Die Sets
Cat. No.
4013
4030
4038
4040
4047
Description
Max. Force Rating
Produces 0.51” (13mm) IR Sample Pellets
Produces 1.25” (32mm) XRF Sample Pellets
Produces 1.38” (35mm) XRF Sample Pellets
Produces 1.57” (40mm) XRF Sample Pellets
Produces 1.77” (45mm) XRF Sample Pellets
8 tons
50 tons
70 tons
85 tons
85 tons
Stainless Steel and Tungsten Carbide Replacement Pellets
Formed Pellet
Diameter
13mm (0.51”)
32mm (1.25”)
35mm (1.38”)
40mm (1.57”)
45mm (1.77”)
Stainless Steel
Catalog Number
4033
4050
4055
4060
4065
Tungsten Carbide
Catalog Number
N/A
4035
4037
4045
4048
® SpectroPress, PelletCups, and Chemplex are registered trademarks of Chemplex Industries, Inc.
™ PlastiCups is a trademark of Chemplex Industries, Inc.
®
SPECTROPELLET FILM
SpectroPellet® Protective Die Pellet
Film
HOME
BACK TO 12 TON
MANUAL PRESS
BACK TO 30 TON
AUTOMATIC
SPECTROPRESS
WITH SELECTIVE
DIE SIZE OPTIONS
BACK TO 30 TON
AUTOMATIC
SPECTROPRESS
WITH INTEGRATED
DIE OF CHOICE
BACK TO
BRIQUETTING DIES
PELLETCUPS
BRIQUETTING
ADDITIVES
AQUEOUS
GRINDING AND
BRIQUETTING
ADDITIVE
Some powdered sample materials exhibit
tendencies to adhere to the pellet die surface
during the briquetting operation. This condition
Available for 32, 35 and 40 mm dies
frequently results in repeated attempts to form a
satisfactory sample briquette with increasing potential threats of cross contamination and
elaborate time consuming clean ups. A novel approach to resolving this problem is by
using Chemplex SpectroPellet Film in precut circles.
®
SpectroPellet Film is characterized with a low coefficient of sample adhesion and
resistant to puncture. By simply inserting a SpectroPellet Film precut circle between the
die pellet and powdered sample substance, a barrier is formed that protects the contact
surfaces of the pellet die and briquetted sample. The unique combination of qualities of
SpectroPellet Film maintains the briquetted sample material and pellet die surfaces intact
by eliminating sample particle adhesion; pellet die clean ups are greatly facilitated.
®
Each precut SpectroPellet Film circle is supported on a paper carrier frame for
convenience of handling and application. Available in three different sizes for use with: 32,
35 and 40 mm diameter dies.
FAST, CONVENIENT AND SIMPLE TO USE
1. Place a small droplet of ordinary methyl, ethyl or isobutyl alcohol on the center of a clean
surface of a die pellet. The alcohol serves as a temporary adhesive for attaching a
SpectroPellet Film.
2. Transfer a SpectroPellet Film to the die pellet by first sliding a small amount of the precut
circle from the carrier frame starting from one point of the pellet and across to the opposite
end. Completely remove the carrier frame and use as a final centering aid of the precut
film circle.
3. Repeat the procedure to the surface of the second die pellet (or integrated die cap) and
®
briquette the sample in the usual manner. The SpectroPellet Film is easily removed and
clean ups are minimal.
SPECIFICATIONS AND ORDERING INFORMATION
Cat.
No.
7032
7035
7040
Nominal
Diameter
Of Die
1.25” (32 mm)
1.375” (35 mm)
1.57” (40 mm)
Die Catalog Number Compatibility
Number of Precut
Circles per Pkg.
4030 Evacuable Die Set and 43032 Integrated Die Set
4038 Evacuable Die Set and 43035 Integrated Die Set
4040 Evacuable Die Set and 43040 Integrated Die Set
500
500
500
® SpectroPellet and Chemplex are registered trademarks of Chemplex Industries, Inc.
Chemplex® INDUSTRIES, INC.
2820 SW 42nd Avenue
Palm City, Fl. 34990-5573, USA
Continental USA Toll Free: (800) 4-CHEMPLEX
Phone: (772) 283-2700 Fax: (772) 283-2774
DIE CONDITIONER AND
PELLET RELEASE AGENT
PELLETAID™ SAMPLE PELLET RELEASE AGENT AND
STAINLESS STEEL DIE CONDITIONER
HOME
BACK TO 12 TON
MANUAL PRESS
BACK TO 30 TON
AUTOMATIC
SPECTROPRESS
WITH SELECTIVE
DIE SIZE OPTIONS
BACK TO 30 TON
AUTOMATIC
SPECTROPRESS
WITH INTEGRATED
DIE OF CHOICE
A simple “dusting” application to the metal pellet
included with a die set prevents the sample from
sticking. Consisting of a lubricious organic
substance, PelletAid™ sample pellet release agent
and die conditioner does not introduce unwanted
analyte-lines of significant detection.
When sparingly applied to the inside walls of a die
set, movement of the pellets and plunger is greatly
facilitated. PelletAid™ die conditioner has an
unusual affinity to adhere to metal components and
serves as a dry focused lubricant.
BACK TO
BRIQUETTING DIES
CHEMICAL CONSTITUENTS
SPECTROPELLET
FILM
C
H
O
Na
70.6% 11.5% 10.4% 7.5%
PELLETCUPS
SPECIFICATIONS AND ORDERING INFORMATION
BRIQUETTING
ADDITIVES
AQUEOUS
GRINDING AND
BRIQUETTING
ADDITIVE
CATALOG NO.
DESCRIPTION
875
PelletAid™ Sample Release/Die Conditioner Agent
Refer to SpectroPellet® Film to Protect
Die Pellet Surfaces, Prevent Sample
Adhesion and Facilitate Clean-Ups
Chemplex® INDUSTRIES, INC.
2820 SW 42nd Ave. Palm City, Fl. 34990-5573, USA
Continental USA Toll Free: (800) 4-CHEMPLEX ■ Phone: (772) 283-2700 ■ Fax: (772) 283-2774
Email: [email protected] ■ On Line Sales: http://www.chemplex.com
® SpectroPellet and Chemplex are registered trademarks of Chemplex Industries, Inc.
™ PelletAid is a trademark of Chemplex Industries, Inc.
XRF ALUMINUM & PLASTIC
BRIQUETTING SAMPLE CUPS
SPECTROCERTIFIED® COMPRESSIBLE TAPERED
ALUMINUM PELLETCUPS® BRIQUETTING CUPS
Transform powdered samples into firm durable solid
briquettes protected on all sides excepting for the
surface to be analyzed. Minimizes potential hazards of
breakage, easy to handle and introduce into briquetting
dies. Simply fill a PelletCups® briquetting cup with the
powdered sample substance, place into die and
briquette in usual manner.
HOME
BACK TO 12 TON
MANUAL PRESS
BACK TO 30 TON
AUTOMATIC
PRESS WITH
SELECTIVE DIE
OPTIONS
BACK TO 30 TON
AUTOMATIC
PRESS WITH
INTEGRATED DIE
Select from Tapered-Walled PelletCups® Briquetting Cups in
Aluminum or Plastic
BACK TO
BRIQUETTING DIES
SPECTROPELLET
FILM
BRIQUETTING
ADDITIVES
AQUEOUS
GRINDING AND
BRIQUETTING
ADDITIVE
Note:
Tapered-Walled, Aluminum PelletCups® Briquetting Cups is a Chemplex innovation
and represent the most popular and versatile device for briquetting a wide range of
powdered samples under diversified pelletizing conditions. Taper tends to reduce
cracking and fissure development. Very close outside diameter tolerance minimizes
sample particles spilling over and becoming entrapped in between the inside walls of the
die and PelletCups® briquetting cups outer diameters. Filled PelletCups® briquetting cups
gently float down into a Chemplex die set cavity on a cushion of entrapped air further
reducing likelihood of spillage.
Tapered-Walled, PlastiCup™ Briquetting Cups are similar to their “ORIGINAL”
aluminum counterparts excepting fabricated of a specialty plastic, shallower and
accommodating less sample volume. Lubricious plastic quality helps extend die life by
resistant-free pellet ejection.
For best results and close tolerances, use with Precision Fabricated Chemplex Stainless Steel Die Sets
SPECIFICATIONS AND ORDERING INFORMATION
Compressible Tapered-Walled Aluminum PelletCups® Briquetting Cups
CAT. NO.
505
535
545
547
OUTSIDE DIAMETER
1.22” (31 mm)
1.36” (34.6 mm)
1.57” (39.8 mm)
1.76” (44.7 mm)
HEIGHT
0.31” (7.9 mm)
0.37” (9.3 mm)
0.36” (9.1 mm)
0.36” (9.11 mm)
PELLETCUPS/PKG
1000
600
600
600
Compressible Tapered-Walled PlastiCup™ Briquetting Cups
CAT. NO.
552
553
554
OUTSIDE DIAMETER
1.22” (31.0 mm)
1.35” (34.3 mm)
1.56” (39.7mm)
HEIGHT
0.25” (6.4 mm)
0.25” (6.4 mm)
0.25” (6.4 mm)
PELLETCUPS/PKG
500
500
500
® PelletCups, SpectroCertified and Chemplex are registered trademarks of Chemplex Industries, Inc.
™ PlastiCup is a trademark of Chemplex Industries, Inc.
XRF GRINDING, BLENDING
and BRIQUETTING
ADDITIVES
HOME
SPECTROCERTIFIED® GRINDING, BLENDING
and BRIQUETTING ADDITIVES
AQUEOUS
GRINDING
AND
BRIQUETTING
ADDITIVE
Most powdered sample substances are considered multi-phased or
compositionally complex. They are comprised of individual particles
or crystal phases frequently dissimilar in composition, density,
hardness, configuration, size and distribution. Each particle tends to
behave as a separate entity from its surrounding constituents.
BACK TO
Chemplex grinding and briquetting additives are formulated to aid in
PELLETCUPS
the grinding and briquetting process by reducing particles to a
uniform size and distribution forming a homogeneous sample blend for XRF analysis.
Under briquetting pressure, the powdered samples are transformed into “plasticized”
pellets with smooth unblemished surfaces resistant to inadvertent chipping or flaking
apart. Samples may be saved for future referral.
PREPARING SAMPLES
Grinding/Briquetting Additives Supplied in
Fine Powder and Pre-Weighed Tablets
In preparing powdered samples requiring a grinding or briquetting additive, it is most advantageous to use the least
amount of additive to minimize the effects of dilution unless the use of the additive is for dilution purposes.
As a starting point, use 1.0 to 2.5 wt % additive of the sample weight, e.g. 0.1 to 0.25 gm additive, to 10 gm sample.
Adjust the amount of additive until the desired results are obtained. Alternatively, the additive weight may be held constant
and the sample weight quantity varied for applications that will be utilizing the convenience of pre-weighed tablets. To
maintain compatibility, standards should be similarly prepared.
GRINDING/BRIQUETTING ADDITIVE PROFILES
ADDITIVE
CHEMICAL COMPOSITION
X-Ray Mix™
SpectroBlend™
Boric Acid
48.7% C, 42.6% O, 8.1% H, 0.6% B
81.0% C, 2.9% O, 13.5% H, 2.6% N
77.6% O, 4.9% H, 17.5% B
Note: Some additives may reportedly contain trace elements that may potentially interfere with a given analysis. It is suggested that a "Blank" is run to
evaluate the presence and interference level prior to an analytical investigation.
TYPICAL APPLICATIONS
Cement • Raw Mix • Sinters • Slags • Catalysts • Ores • Refractories • Fertilizers • Soil • Phosphate Rock • Oxides • Alumina • Bauxite •
Carbonates • Silicates • Organics • Inorganics • And many other types of sample substances exhibiting difficulty in particle size reduction,
distribution and briquetting
ADDITIVE
PROMINENT CHARACTERISTICS
General purpose grinding agent. Balanced for abrasiveness and lubricity to aid in grinding dissimilar particles of
X-Ray Mix™ moderate hardness for relatively short times. Highly “plasticizes” and firmly bonds samples together under
briquetting pressure. Available in pre-weighed tablets for ease of dispensing.
A 44µ powder well suited for blending and as a diluent for high concentrations. Well balanced with abrasive and
lubricious constituents for grinding most sample materials emphasizing difficult-to-process samples requiring long
SpectroBlend™ grinding cycles in metallic comminution vials or dishes. Resistant to degradation by thermal and irradiation
exposure. Samples have “plasticized” surfaces. Available in bulk powder and ½ gm pre-weighed tablets for ease of
dispensing.
Abrasive substance for processing samples with strong re-welding tendencies. Sample pellets are fair to moderately
bond together. Frequently used in conjunction with other additives to impart increased abrasiveness to the grinding
Boric Acid
process.
SPECIFICATIONS AND ORDERING INFORMATION
CAT. NO.
DESCRIPTION
600
625
650
660
690
750
X-Ray Mix Powder; 1 lb/btl (454 gm)
X-Ray Mix ¼ gm Tablets; 250 tablets/btl
X-Ray Mix ½ gm Tablets; 500 tablets/btl
SpectroBlend 44µ Powder; 1 lb/btl (454 gm)
SpectroBlend ½ gm Tablets; 500 tablets/btl
Boric Acid ½ gm Tablets; 1000 tablets/btl
® SpectroCertified and Chemplex are registered trademarks of Chemplex Industries, Inc.
™ SpectroBlend and X-Ray Mix are trademarks of Chemplex Industries, Inc.
XRF GRINDING and
BRIQUETTING ADDITIVES
LIQUID-BINDER™ AQUEOUS GRINDING AND
BRIQUETTING ADDITIVE
HOME
BACK TO
BRIQUETTING
ADDITIVES
BACK TO PELLET
CUPS
For powdered samples deficient in briquette forming constituents and
dilution with an additive presents a problem, Liquid-Binder
grinding/briquetting additive offers an alternative. Blend a small amount
Liquid-Binder Aqueous Grinding and Briquetting Additive with the
sample until homogeneous slurry develops. Evaporate the carrier and
de-agglomerate
the
sample
by
grinding.
Liquid-Binder
grinding/briquetting additive coats each sample particle with a
completely organic polymeric binding ingredient that tenaciously holds it
together. Form into a briquette in the usual manner. Sample pellet is
firm, extremely hard and resistant to breakage. 1 cc Liquid-Binder
grinding/briquetting additive contains 100 mg polymeric ingredient,
(C6H9ON)n, in methylene chloride solvent.
SPECIFICATIONS AND ORDERING INFORMATION
CATALOG NO.
DESCRIPTION
800
Liquid-Binder; 1 pt (480 cc)
™ Liquid-Binder is a trademark of Chemplex Industries, Inc.
Notice: Liquid-Binder contains ethylene chloride. Use in a well-ventilated area, avoid inhalation and contact. Send for MSDS prior to purchase.
Chemplex® INDUSTRIES, INC.
2820 SW 42nd Avenue
Palm City, Fl. 34990-5573, USA
Continental USA Toll Free: (800) 4-CHEMPLEX
Phone: (772) 283-2700
Fax: (772) 283-2774
Email: [email protected]
On Line Sales: http://www.chemplex.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement