IPOE-162S Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter The Best Industrial Grade Data Link and Power Sourcing for Non-PoE Solution The IPOE-162S is an Industrial High Power PoE Splitter that can split the 48~56V DC over the existing Ethernet cable into the selectable 12V or 24V DC power output. It supports passive 10/100/1000Mbps Ethernet connection ability and complies with IEEE 802.3at High Power over Ethernet standard that supports up to 25 Watts output power to powered device. To fulfill the growing industrial applications, the IPOE-162S is designed to work under the operating temperature range from -40 to 75 Degree C (-40 to 167 Degree F). The IPOE-162S is an ideal solution to transfer power to traditional network device with high power demand directly without the need to install additional power outlets and electrical cabling in the industrial environment. Innovative Selectable DC Power Output Voltage Via the innovative 12 volt / 24 volt DIP switch on the front panel, the IPOE-162S can supply either 24V DC power to industrial equipment or 12V DC output to the common network devices, such as wireless Access Point or IP camera. It highly increases the flexibility of the product applications. Dual Power Output Capability By supporting up to 25 Watts 802.3at Power over Ethernet cable, the IPOE-162S can satisfy not only single power-hungry equipment but also able to share the 25 Watts output power to two non-PoE Ethernet devices simultaneously through a 4-Pin terminal block. For example, the two power output can be applied as below to completely solve the need of electric source: IP Camera (Power 1) + Outdoor housing with fan and heater (Power 2) IP Camera (Power 1) + Pan & Tilt Motor (Power 2) Analog Camera (Power 1) + IP Video Server (Power 2) Powered Device 1 Maximum Output 25 Watts Powered Device 1 Total Maximum Output 25 Watts Powered Device 2 100 meters IEEE 802.3at Injector PoE ICA-HM351 Data + DC Power RJ-45 Data 12V DC for Camera IP Camera with FAN, Heater 12V DC for Fan & Heater IPOE-162S 802.3at PoE Splitter Data Sheet 1 IPOE-162S Environmentally Hardened Design With compact, slim type IP30 industrial case protection, the space saving Industrial High Power PoE Splitter IPOE-162S can be placed in almost any difficult environment. It allows either DIN rail or wall mounting for efficient use of cabinet space. Being able to operate under the temperature range from -40 to 75 Degree C, the IPOE-162S is the ideal product for co-working with Industrial High Power Injector which can feed the power to Non-PoE devices up to 100 meters (328 feet) away on those harsh environments. DC PTZ Speed Dome Data Data + Power PoE DC DC Power Line (DC) 1000Base-T UTP PoE 1000Base-T UTP with PoE Plug and Play, Easy Cabling Installation With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, connect through the Industrial High Power PoE Injector with the IPOE-162S, you could also have benefits including cost saving, easy networking planning and high network reliability. Key Features Interface Industrial Case / Installation •• 2-Port RJ-45 interfaces •• IP30 metal case protection –– 1-Port PoE Power+ Data input •• DIN Rail and Wall Mount Design –– 1-Port Data output •• Supports EFT protection 6000 VDC for power line •• 2 DC out (4 Pin Terminal Block) Power over Ethernet Splitter •• Complies with IEEE 802.3at High Power over Ethernet, PD •• Splits the 48~56V DC power over RJ-45 Ethernet cable into DC 12V / 24V output •• -40 to 75 Degree C operating temperature Standard Compliance •• IEEE 802.3 10Base-T •• Auto-detect of IEEE 802.3at PoE equipment, protecting devices from being damaged by incorrect installation •• IEEE 802.3u 100Base-TX •• Adjustable two different output voltage options (12V / 2A, 24V / 1A) to fit various devices •• IEEE 802.3at High Power over Ethernet standard •• Distance up to 100 meters Data Sheet 2 •• Supports 6000 VDC Ethernet ESD protection •• IEEE 802.3ab 1000Base-T •• FCC Part 15 Class A, CE IPOE-162S Applications The IEEE 802.3at Injector and Splitter Installation Due to the capability of IEEE 802.3at standard, the IPOE-162S can co-work with the IEEE 802.3at Gigabit PoE injector devices (like PLANET POE161), High Power Switch or High Power Media Converter and transform non-PoE equipment to IEEE 802.3at PoE application. For a place where is hard to find the power inlet, the High Power PoE devices and the IPOE-162S operate as a pair to provide the easiest way to power your Ethernet devices that need high power input, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome Camera, color touch- screen Voice over IP (VoIP) telephones, and multi- channel wireless LAN access points. 802.3at PoE Switch + IPOE-162S 100 meters 75 ℃ -40℃ 802.3at PoE Switch IPOE-162S PTZ Camera Power Data PoE Data DC Power Power 12V/24V 1000Base-T UTP PoE 1000Base-T UTP with PoE DC Power Line (DC) 802.3at PoE Media Converter + IPOE-162S 220m to 10km 100 meters 75 ℃ -40℃ Data 1000 Industrial Fiber Switch IPOE-162S Power Data PTZ Camera Data PoE DC Power DIN-RAIL Power Supply DC Industrial 802.3at Media Converter Power Power 12V/24V 1000 1000Base-SX/LX Fiber-optic 1000Base-T UTP Data Sheet 3 PoE 1000Base-T UTP with PoE DC Power Line (DC) PLANET Technology Corporation 11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: [email protected] www.planet.com.tw VoIP Gateway: vip.planet.com.tw PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2008 PLANET Technology Corp. All rights reserved. IPOE-162S Specification Product Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter Model Hardware Specification “PoE (Power + Data)” Input Port Interface “Data” Out Port DC Out Plug Connector LED Indicator LED Indicator DIP Switch Power Input Power Output Dimension (W x D x H) Weight Enclosure Installation ESD Protection IPOE-162S Network Cable Power over Ethernet PoE Standard Number of device can be powered Standards Compliance Regulation Compliance Stability Testing Environment Operating Temperature Storage Temperature Humidity 1 x RJ-45 10/100/1000Base-T 1 x RJ-45 10/100/1000Base-T 1 System: Power Ready x 1 (Green) System: Power Ready x 1 (Green) 12V DC / 24V DC output voltage 802.3at PoE 48~56V DC 12V / 24V DC, Max 2A (adjustable) 135 x 87.8 x 32 mm 421g IP30 Metal Case DIN Rail Kit and Wall Mount Ear 6KV DC 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 distance up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m) IEEE 802.3at High Power over Ethernet 1 or 2(Vary on Device’s Power Requirement, DC1 + DC2 can not over the 25.5Watts ) IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at High Power over Ethernet FCC Part 15 Class A, CE IEC60068-2-32(Free fall) IEC60068-2-27(Shock) IEC60068-2-6(Vibration) -40 ~ 75 Degree C -40 ~ 85 Degree C 5 ~ 95% (Non-condensing) Ordering Information IPOE-162S Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter Related Products IGTP-802T 1000Base-SX to 10/100/1000Base-T 802.3at PoE Industrial Media Converter (SC,MM) -550m IGTP-802TS IGTP-805AT POE-161 1000Base-LX to 10/100/1000Base-T 802.3at PoE Industrial Media Converter (SC,SM) -10km 1000Base-SX / LX to 10/100/1000Base-T 802.3at PoE Industrial Media Converter (mini-GBIC, SFP) IEEE 802.3at Gigabit High Power over Ethernet Injector (10/100/1000Mbps, Mid-Span, 30 Watts) Data Sheet 4 11-11 PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: [email protected] www.planet.com.tw C-IPOE-162S PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2011 PLANET Technology Corp. All rights reserved.