Leviton 21 Switches All Grades

Leviton 21 Switches All Grades
THE FUTURE IS ON®
Smart Products.
Ingenious Solutions.
Wiring Devices, Energy Management
Solutions and Commercial Data
Infrastructure Products
L-200
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
INDEX
Industrial Grade
Safety Disconnect ......................................... 614
Mechanical Interlock ...................................... 619
Manual Motor Starting ................................... 622
Toggle & Locking ............................................ 626
Commercial Grade
Decora® .......................................................... 635
Toggle ............................................................. 641
Residential Grade
Decora® .......................................................... 646
Toggle ............................................................. 650
Appliance ....................................................... 653
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
613
Switches
Industrial Grade
PowerSwitch® Safety Disconnect Switches – SDS
PowerSwitch SDS devices meet NEC Article 430 for separate disconnect in-sight of motor loads and OSHA Title
29 CFR 1910 and 1926 for lockout, tagout protection. The complete PowerSwitch SDS package is non-metallic,
watertight and is engineered to enhance safety and performance for critical power control installations.
DS60-AX
DS100-AX
DS30-FAX
DS30-AX
Specifications and Features
• 30 Amp Non-Fused & Fused
• 60 Amp Non-Fused & Fused
• 100 Amp Non-Fused
• Fused models accept “Class-J” Time-Delay Fuses
• Engineered to UL & IEC Watertight Standards
• Backed by a Two-Year Limited Warranty
614
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
POWERSWITCH® DS30-AX
2 Top drill marks for wiring flexibility 1 Fitting supplied - 3/4”
4 Mounting feet included (5 position settings)
Captive stainless steel cover screws won’t fall out when cover is open
Factory installed cover gasket
®
High impact, non-conductive Valox cover, housing and handle
Enclosure rated to UL and IEC watertight standards Type 3R, 4X, and 12K IP67
UL94 V-0 Self-extinguishing, flame retardant rating
Circuit identification pad for means of identifying specific equipment loads
2 Bottom drill marks
1 Right side and 1 Left side drill mark for conduit entry
Neutral buss
1 Factory installed auxiliary contact (normally open - 10 Amp).
Additional auxiliary contacts available (normally closed - 10 Amp).
Early make, late make contacts
Ground buss
IEC non-fused switch mechanism
Metal ground frame
Drill mark for back conduit entry
Rugged hinge mechanism pivots 180° for easy access during installation and maintenance
Horsepower ratings and contact ratings appear on inside cover label
Handle with padlock installed
TESTING AND CODE COMPLIANCE
• 30 Amp, Non-Fused Safety Disconnect Switch
• Meets UL 508 Standards
• cUL per CSA Specifications C22.2 #14 Certified
• Engineered to UL & IEC Watertight Standards
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
615
Switches
Industrial Grade
POWERSWITCH® DS60-FAX
Liquid-tight conduit fitting (sold separately) can be installed for top or bottom feed
Stainless steel screws are captive and will not fall out when cover is opened
Impact UV and chemical-resistant Valox enclosure
rated to UL and IEC watertight standards
• 3R, 4X & 12K
• IP67
Red “pistol grip” handle provides visual confirmation of switch’s status
Integrated lockout handle meets OSHA safety regulations
Circuit identification pad for means of identifying specific equipment loads
Pre-wired grounding plates (top and bottom of enclosure) connect
to metal conduit grounding system
Brass threaded inserts will not strip, provide higher torque, and form tighter seal between
back box and cover
Generous wiring space for top to bottom wiring
Disconnect switch with integrated fuse holder offers proven
performance in a compact package
• Fused cartridges accept “Class J” fuses (not included)
• 1 Factory installed Auxiliary Contact (Normally Open – 10 Amp)
• Additional Auxiliary Contact Available (Normally Closed – 10 Amp)
• Easily accessible neutral and ground terminal blocks
Rugged hinge mechanism pivots 180º for easy access
during installation and maintenance
Handle with padlock installed
616
Cover Screws: 1-1/8” deep slotted,
LG stainless steel
Mounting Screws: 10-24 x 1/2” deep
slotted, LG stainless steel
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
SAFETY DISCONNECT SWITCHES
Description
Interrupting Ratings
Non-Fused*
Interrupting Ratings
Fused **
Amps
30
60
100
30
60
Max Voltage
600VAC
600VAC
600VAC
600VAC
600VAC
RMS Symmetrical Amperes
10,000A
50,000A
50,000A
200,000A
200,000A
Cat No.
DS30-AX
DS60-AX
DS100-AX
DS30-FAX
DS60-FAX
*Non-Fused are suitable for use on circuits capable of delivering not more than the RMS symmetrical amperes listed on the chart above.
**Fused, when protected by Class J fuses, 600V AC maximum, are suitable for use on circuits capable of delivering not more than the RMS
symmetrical amperes listed on the chart above.
MAXIMUM HP RATINGS AS PER UL 508
Volts
120VAC
208VAC
240VAC
480VAC
600VAC
3Ø Y120/208VAC
3Ø 240VAC
3Ø 480VAC
3Ø 600VAC
DS30-AX
2
5
5
10
N/A
10
10
20
25
Cat. No. Non-Fused
DS60-AX
DS100-AX
2
5
20
25
10
15
20
25
20
20
20
25
20
30
40
50
40
50
Cat. No. Fused
DS30-FAX
DS60-FAX
2
N/R
7.5
15
3
N/R
15
N/R
20
N/R
7.5
15
7.5
15
15
30
20
30
N/R = Not Rated N/A = Not Available
TESTING AND CODE COMPLIANCE
• Fused (Including 100A Non-Fused -DS100-AX) UL 98 (File #E63969)
• Non-Fused - UL 508 (File #E63969)
• CSA Certified C22.2 No. 14
• IEC 947-3
• Engineered to UL & IEC Watertight Standards
MATERIAL CHARACTERISTICS
• Environmental: Flammability, Rated V2 or better per UL 94
or CSA 22.2 No 0.6; V-0 for watertight enclosure
• Rain (3R) per UL 50: Water spray @ 5 psi from all sides for 1 hr
• Hosedown (4X) per UL 50: Water spray @ 65 gal/min for 5 min.
• Dust (12K) per UL 50: Cement dust circulated @ 1000 ft/
min. for 5 min.
• Gasket Aging: 70°C for 168 hours
• UV Resistance: Exposed plastic materials are UV stabilized
• Operating Temperature: -40°C to 60°C (-40ºF to 140ºF)
ELECTRICAL
• Mold Stress Relief: 70°C for 7 hours
• Knockout Test: Remains in place with 20 lb push
• Crush: 100 lb
• Impact 1.2 lb steel ball dropped from 5 ft
• Cold Impact: Same as above, after conditioning to -35°C
• Strength of Insulating Base and Support: 110% of specified
tightening torque on terminal screws
• Pullout: 18 lb pull on internal wires
MECHANICAL — GROUND PATH INTEGRITY
• Device – 30A, Current Applied – 60A, Duration – 2 min.
• Device – 60A, Current Applied – 120A, Duration – 4 min.
• Device – 100A, Current Applied – 200A, Duration – 6 min.
Current Interrupting: Certified for current interrupting at full-rated current and voltage. Endurance: 6000 operations at rated current and voltage (power factor 0.75 - 0.80).
Dielectric: 1000V plus twice rated voltage for 1 minute.
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
617
Switches
Industrial Grade
DIMENSIONS
30 AMP FUSED & 60 AMP NON-FUSED
60 AMP FUSED & 100 AMP NON-FUSED
618
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
PowerSwitch® EDSR-23 and MIDSR-23 30Amp, 600VAC Mechanically
Interlocked Disconnect Switch with Receptacle
Leviton is pleased to announce the expansion of our line of PowerSwitch mechanical interlock devices with
the addition of the MIDSR-23 Mechanically Interlocked Disconnect Switch with Integrated Receptacle. Leviton’s
MIDSR-23 can be used with any 20A or 30A NEMA locking single receptacle. It meets the requirements for
outdoor/indoor applications conforming to UL Standard 50, NEMA environmental ratings of 4X and 12K and is
rated IP66 when used in conjunction with Leviton Wetguard™ plugs and receptacles. It is rated IP54 and NEMA
3R with cover closed when not in use.
Specifications and Features
• Meets the requirements of Outdoor/Indoor installations, conforming to IP 66, UL Standard 50, and NEMA
Environmental Ratings of 4X, 12K, only when used in conjunction with Leviton Wetguard™ plugs
• Meets the requirements of Outdoor/Indoor installations conforming to IP 54 and NEMA 3R with standard locking
NEMA plugs and receptacles with cover closed when not in use
• For use with 20A - 30A NEMA locking plugs up to 600V (sold separately)
• Provides ON-OFF switched control for a connected load
• This enclosure provides lockout capability in compliance with OSHA Lockout/Tagout Regulation 29 CFR Part
1910.147 (in the OFF position) with an acceptable padlock/shackle, thereby assuring the connected equipment
cannot be energized
• Auxiliary contact open prior to the line contacts for pilot duty switching
• Backed by a Two-Year Limited Warranty
• Suitable for use on circuits capable of delivering not more than 10,000 RMS Symmetrical Amperes
• Certified to UL 231 and UL 686, UL 98 Fused, UL 508 Non-Fused, CSA C22.2 CE, IEC 309-1 and 309 2 Standards
POWERSWITCH® EDSR-23 AND MIDSR-23 ACCESSORIES (INCLUDED)
A. 1-green wire and ground bracket
B. 5 pieces of wire accommodating all receptacle to
switch connections (1-white, 1-green, 3-black)
D
C. Wetguard® seal package for use with corrosion
resistant receptacles and Wetguard plugs
D. Mounting feet
A
C
B
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
619
Switches
Industrial Grade
POWERSWITCH® MIDSR-23
Drill points and ample space provided for bottom or top conduit entry (conduit hub not included)
Captive stainless steel screws won’t fall out when cover is open
Place receptacle amperage and voltage label here
Impact resistant, non-conductive Valox® thermoplastic housing and handle
Housing material has UL94 V-0 self-extinguishing flammability rating
Interlock mechanism (patent # 6956176) prevents receptacle from being
energized when handle is down; constrains plug when up
Ground buss
Neutral buss
DIN rail mounted, IEC non-fused 30A switch mechanism
One factory installed auxiliary contact
(normally open – 10Amp)
Additional auxiliary contacts available
(normally closed – 10Amp)
Early make, late break contacts
Accepts 20A or 30A, up to 600V, Leviton V-0-MAX™
or any competitive NEMA locking flush receptacle
(sold separately)
Bottom-hinged mechanism pivots 180 deg. for easy access during installation
and maintenance
Factory installed cover gasket
SAFETY DISCONNECT SWITCHES
Description
Interrupting Ratings
Non-Fused*
Amps
30
30
Max Voltage
600VAC
600VAC
RMS Symmetrical Amperes
10,000A
10,000A
Cat No.
EDSR-23
MIDSR-23
*Non-Fused are suitable for use on circuits capable of delivering not more than the RMS symmetrical amperes listed on the chart above.
EDSR-23
620
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
MAXIMUM HP RATINGS AS PER UL 508
Volts
120VAC
208VAC
240VAC
480VAC
600VAC
3Ø Y120/208VAC
3Ø 240VAC
3Ø 480VAC
3Ø 600VAC
Cat. No. Non-Fused
EDSR-23
MIDSR-23
2
2
5
5
5
5
10
10
N/A
N/A
10
10
10
10
20
20
25
25
N/A = Not Available
Related Products
For additional North American watertight mechanical interlocks in Pin & Sleeve Devices section.
See page 438 for more information.
TESTING AND CODE COMPLIANCE
• Non-Fused - UL 98 (File #E63969)
• Non-Fused - UL 508 (File #E63969)
• CSA Certified C22.2 No. 14
• IEC 947-3
• Engineered to UL & IEC Watertight Standards
MATERIAL CHARACTERISTICS
• Environmental: Flammability, Rated V2 or better per UL 94
or CSA 22.2 No 0.6; V-0 for watertight enclosure
• Rain (3R) per UL 50: Water spray @ 5 psi from all sides for 1 hr
• Hosedown (4X) per UL 50: Water spray @ 65 gal/min for 5 min.
• Dust (12K) per UL 50: Cement dust circulated @ 1000 ft/
min. for 5 min.
• Gasket Aging: 70°C for 168 hours
• UV Resistance: Exposed plastic materials are UV stabilized
• Operating Temperature: -40°C to 60°C (-40ºF to 140ºF)
ELECTRICAL
• Mold Stress Relief: 70°C for 7 hours
• Knockout Test: Remains in place with 20 lb push
• Crush: 100 lb
• Impact 1.2 lb steel ball dropped from 5 ft
• Cold Impact: Same as above, after conditioning to -35°C
• Strength of Insulating Base and Support: 110% of specified
tightening torque on terminal screws
• Pullout: 18 lb pull on internal wires
MECHANICAL — GROUND PATH INTEGRITY
• Device – 30A, Current Applied – 60A, Duration – 2 min.
Current Interrupting: Certified for current interrupting at full-rated current and voltage. Endurance: 6000 operations at rated current and voltage (power factor 0.75 - 0.80).
Dielectric: 1000V plus twice rated voltage for 1 minute.
DIMENSIONS
MIDSR-23
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
621
Switches
Industrial Grade
MS403-DS
Suitable as Motor Disconnect
Topped roll-over brass bushings
secure yoke to device
All 30 and 40A motor starters are listed suitable as motor
disconnect when protected by a 30A time-delay fuse.
Oversized PBT toggle is easy to turn ON/OFF with gloved
hand and capable of withstanding extreme impact, harsh
chemical attack, and prolonged ultraviolet exposure
Mounting yoke is permanently marked with catalog
number, amperage, voltage and horsepower ratings for
easy identification
Robust, full-face, nickel-plated, brass mounting yoke
offers exceptional strength and corrosion-resistance
Impact-resistant PBT face and base
Internal chamber barriers prevent flash-over
between contact sets
#10 triple-combination nickel-plated terminal
screws resist loosening from vibration and facilitates
tightening to proper torque ranges
Multiple termination design accepts back and side wiring,
terminal clamps, or ring terminals
Strip gauge and
terminal identification
permanently marked
on base of device
Insulating barriers
provide terminal isolation
between phases
Thick walled
PBT housing and
interlocking face
encapsulates and
protects internal
mechanism in
extreme and
harsh industrial
environments
Side and back wired terminal screws accept up to a #10
AWG solid copper wire
MS602-FW
Thick walled PBT housing and
interlocking face encapsulates
and protects internal
mechanism in extreme and
harsh industrial environments
Large toggle is easy to turn ON/OFF with gloved hand
Topped roll-over zinc-plated brass bushings secure
yoke to device
Insulating barriers provide terminal isolation
between phases
Front or back wired terminal screws accept up to a
#4 stranded AWG or #10 solid AWG copper wire
Impact-resistant PBT
face and base
Internal chamber barriers prevent
flash-over between contact sets
TESTING AND CODE COMPLIANCE (30A, 40A, 60A)
• UL 508 Listed cUL per CSA Specification C22.2 No. 14 Certified
• Rated V-0 per UL94
• 30A and 40A are listed suitable as motor disconnect
622
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
AC Manual Motor Starting Switches
Specifications and Features
Motor Starting Switches
• All molded parts are thermoplastic to resist impacts, chemicals, temperature, tracking and arcing
• 30 Amp and 40 Amp switches are listed suiitable as motor disconnect when protected by a 30 Amp time-delay fuse
• Positive-contact design enhances fast-make/slow-break
• Silver-alloy contacts for maximum conductivity and service life
• Back and side wire terminals accept up to #10 AWG solid copper wire. For stranded #8 AWG wire, remove terminal
clamp and use ring terminal (sold separately)
• Oversized #10 triple-combination terminal screws are vibration resistant
• Insulating barrier between terminals provide isolation from each phase
• Nickel-plated brass mounting yoke for superior corrosion resistance
• Large toggle provides positive actuation, even with gloved hand
• Backed by a Limited Ten-Year Warranty
Welding Starting Switch
• Capable of accommodating bus bar termination in multi-gang applications
• Hole for mounting hardware supports panel mounting with self-threading fasteners or pop rivets
• Terminal screws accept up to # 10 AWG solid copper wire. For stranded # 8 AWG wire, remove terminal clamp and
use ring terminal (sold separately)
• Fast-threading, corrosion-resistant brass triple combination screws for fast, easy installation
• Backed by a Limited Ten-Year Warranty
MS302-DS
WS402
N1303-DS
NOTE: MS302-DSS Toggle Length, .64 (16.3 mm)
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
623
Switches
Industrial Grade
BACK AND SIDE WIRED/FRONT WIRED - MOTOR STARTING U S
Description
Color
Cat No.
Rating
30A - 600VAC
Switch In Steel Switch In Steel
Type 1 Encl.
Type 3R Encl.
N1302-DS
N3302-DS
Switch In
Type 4X Encl.*
MS4X-302
Switch
Only
MS302-DS
N13NC-DS
N33NC-DS
—
—
—
—
—
MS302-DSS
N1303-DS
N3303-DS
MS4X-303
MS303-DS
N1303-TDS**
—
—
—
N13NC-TDS**
—
—
—
3HP 120VAC
7.5HP 240VAC
15HP 480VAC
20HP 600VAC
—
—
—
—
—
—
—
MS303-DSS
2HP 120VAC
5HP 240VAC
10HP 480VAC
15HP 600VAC
3HP 120VAC
7.5HP 240VAC
15HP 480VAC
20HP 600VAC
—
—
MS4X-402
MS402-DS
MS4X-403
MS403-DS
—
MS602-BW
—
MS602-FW
—
MS603-BW
Max HP Rating
Double-pole, single-throw
without overload protection
Disconnect Rated
Black
Disconnect marked
Enclosure ONLY
Double-pole –
Short Toggle Version
Disconnect Rated
Black
Three-pole, single-throw
without overload protection
Disconnect Rated
Disconnect marked
Enclosure ONLY
Three-pole –
Short Toggle Version
Disconnect Rated
Rating
Double-pole, single-throw
without overload protection
Disconnect Rated
Three-pole, single-throw
without overload protection
Disconnect Rated
Rating
Double-pole, single-throw
without overload protection
Back Wired
Double-pole - Front Wired
Black
Black
Black
Thermoplastic
Black
Thermoplastic
Black
2HP 120VAC
5HP 240VAC
10HP 480VAC
15HP 600VAC
2HP 120VAC
5HP 240VAC
10HP 480VAC
15HP 600VAC
3HP 120VAC
7.5HP 240VAC
15HP 480VAC
20HP 600VAC
40A - 600VAC
Black
Black
—
60A - 600VAC
Black
Black
Three-pole, single-throw
without overload protection
Back Wired
Three-pole - Front Wired
Black
Enclosure ONLY
Black
Black
10HP 240VAC
15HP 480VAC
20HP 600VAC
10HP 240VAC
15HP 480VAC
20HP 600VAC
10HP 240VAC
25HP 480VAC
30HP 600VAC
10HP 240VAC
25HP 480VAC
30HP 600VAC
—
—
N3602
—
—
—
N3603
—
MS603-FW
—
—
N36NC
—
—
* 4X Enclosures are high impact Valox™ in wateright enclosure rated rated 4X, 3R, 12K and IP67.
** Enclosure has black thermoplastic cover with steel box.
624
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
SIDE WIRED - WELDER SWITCH
Description
Color
Cat No.
Rating
40A - 600VAC
Double-pole, single-throw
Max HP Rating
5HP 250VAC
Black
Switch Only
WS402*
* UL recognized component for OEM use. Terminal screws packaged separately.
TESTING AND CODE COMPLIANCE
• Meets all NEMA WD 1 & 6, and ANSI requirements
• Meets Federal Specification WS-896
• UL Listed (File #E-7458)
• CSA Certified (File #152105)
• NOM Certified (#057)
• WS402 UL Recognized component (File# E63968)
MATERIAL CHARACTERISTICS
• Environmental: Flammability, Rated V2
• Operating Temperature: -40°C to 65°C
ELECTRICAL
• Dielectric Voltage: Withstands 2200V for 1 min.
• Overload UL 528 Test: 50 cycles of overload at 6 times
rated current
• Temp. Rise: 50° C max at full rated current
• Tungsten filament lamp load (Fed. Spec.) WS896E, SP, DP, 3-Way
• Endurance: UL 508 Test: 6000 cycles inductive motor type load.
Dual rated. General and manual motor control
MECHANICAL
• Terminal I.D.: T1, T2, T3, L1. L2 and L3 marked on back of device
• Terminal Accomm.: #10-#4 AWG back wired; #14-#12 AWG
side wired
• Product I.D.: Ratings are permanently stamped on device strap
• Torque Range: 25 inch pounds
Related Products
For complementing wallplates See page 715 for more information.
DIMENSIONS
TOP
MS402-DS & MS403-DS
BACK
SIDE
FRONT
N3302-DS, N3303-DS & N33NC-DS
N13NC-DS
MS602-BW & MS603-BW
For technical support call 800-824-3005
MS602-FW & MS603-FW
BACK
SIDE
N3602-DS, N3603-DS & N36NC-DS
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
625
Switches
Industrial Grade
Extra Heavy-Duty Specification Grade Toggle and Locking Switches
Leviton’s Industrial Grade AC toggle switches for extra heavy-duty applications represent top-of-the-line quality
and peak performance. Leviton uses the finest materials available and the highest production standards to
produce industrial switches of unmatched versatility and reliability.
Specifications and Features
• Top-of-the-line industrial quality
• Heavy gauge copper alloy one-piece arm for top performance
• Large silver cadmium-oxide contacts for long life, prevent sticking, welding and excessive pitting
• Color-coded covers: 15 Amp-Blue; 20 Amp-Red; 30 Amp-Green
• Fully enclosed switch mechanism in rugged housing for strength, tracking and arc resistance
• Brass combination-head terminal screws on Extra Heavy-Duty devices, steel combination head terminal screws
on other devices
• Self-grounding clip (self-grounding when used with a grounded metal wallbox)
• Wire lead switches for fast and easy installation
• Backed by a Limited Ten-Year Warranty
Break-off plaster ears for
use as shims
1221-2I
Fully enclosed switch mechanism in
rugged thermoplastic housing for
strength, tracking and arc resistance
Thermoplastic toggle has high-impact
strength and withstands elevated
operating temperatures
Large head, triple-drive, brass
combination screws for speedy
wiring and installation
Color-coded covers: 15 Amp-blue;
20 Amp-red; 30 Amp-green
Large silver cadmium-oxide contacts
for long life, prevent sticking, welding
and excessive pitting
Heavy gauge, anti-corrosive
mounting strap with
grounding screw and
self-grounding clip
Heavy-gauge copper alloy, one-piece contact
and toggle cam arm provides smooth, firm
toggle action for “fast-make” and “slow-break”
operation
Back or side-wired
grounding terminal for
quick installation
Shallow 3/4” deep body for
more wall box room
626
External clamp-type terminal provides secure connection for back
and side wiring
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
BACK AND SIDE WIRED/WIRE LEAD U S
Description
Rating
Color
Single Pole
White
Ivory
Light Almond
Grey
Black
Brown
Red
Single Pole, Locking†
White
Ivory
Grey
Black
Brown
Red
White
Ivory
White
Ivory
Grey
Black
Brown
Red
—
1201-2IL
—
—
1201-2L
—
1241-W
1241-I
1202-2W
1202-2I
1202-2GY
—
1202-2
1221-2WL
1221-2IL
1221-2GL
1221-2EL
1221-2L
1221-2RL
1243-W
1243-I
1222-2W
1222-2I
1222-2GY
1222-2E
1222-2
1222-2R
—
—
—
—
3031-2L
—
Ivory
Brown
White
Ivory
Light Almond
Grey
Black
Brown
Red
—
1202-2L
1203-2W
1203-2I
—
1203-2GY
—
1203-2
1203-2R
1222-2IL
1222-2L
1223-2W
1223-2I
1223-2T
1223-2GY
1223-2E
1223-2
1223-2R
—
3032-2L
3033-2W
3033-2I
—
—
—
3033-2
—
White
Ivory
Grey
Brown
White
Ivory
White
Ivory
Light Almond
Grey
Black
Brown
Red
—
1203-2IL
—
1203-2L
1242-W
1242-I
1204-2W
1204-2I
—
1204-2GY
—
1204-2
—
1223-2WL
1223-2IL
1223-2GL
1223-2L
1244-W
1244-I
1224-2W
1224-2I
1224-2T
1224-2GY
1224-2E
1224-2
1224-2R
—
—
—
3033-2L
White
Ivory
Grey
Brown
—
—
—
1204-2L
1224-2WL
1224-2IL
1224-2GL
1224-2L
Double Pole, Locking†
3-Way
3-Way, Locking†
3-Way, with 6” Wire Leads
4-Way
4-Way, Locking†
†Key for Locking Switch: Cat. No. 55500-PRT.
NOTE: Cat. Nos. 1201, 1221 feature external clamp-type wiring termination for back and side wiring.
For technical support call 800-824-3005
30A
3031-2W
3031-2I
—
—
—
3031-2
—
2.12 (53.9)
1.03
(26.1)
1221-2I
Continued On Next Page >
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
1.31 (33.3)
4.06 (103.2)
3032-2W
3032-2I
—
—
3032-2
—
KEY†
1201-2IL
3.28 (83.3)
Single Pole,
with 6” Wire Leads
Double Pole
15A
1201-2W
1201-2I
—
1201-2GY
—
1201-2
1201-2R
Cat No.
120/277VAC
20A
1221-2W
1221-2I
1221-2T
1221-2GY
1221-2E
1221-2
1221-2R
www.barr-thorp.com
627
Switches
Industrial Grade
Continued From Previous Page >
Description
Rating
Color
Heavy-Duty Single Pole
White
Ivory
Light Almond
Grey
Brown
Red
White
Ivory
Grey
Brown
White
Ivory
Light Almond
Grey
Brown
Red
White
Ivory
Grey
Brown
Cat No.
120/277VAC
20A
1221-SW
1221-SI
1221-ST
1221-SGY
1221-S
1221-SR
1222-SW
1222-SI
1222-SGY
1222-S
1223-SW
1223-SI
1223-ST
1223-SGY
1223-S
1223-SR
1224-SW
1224-SI
1224-SGY
1224-S
15A
Heavy-Duty Double Pole
Heavy-Duty 3-Way
Heavy-Duty 4-Way
30A
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
†Key for Locking Switch: Cat. No. 55500-PRT.
NOTE: Cat. Nos. 1201, 1221 feature external clamp-type wiring termination for back and side wiring.
BACK AND SIDE WIRED - CANADIAN S
Description
Rating
Color
Single Pole
White
Ivory
Grey
Brown
Red
15A
18201-W
18201-I
18201-G
18201-B
18201-R
Cat No.
347VAC
20A
18221-W
18221-I
18221-G
18221-B
18221-R
Single Pole, Locking†
Brown
Ivory
Brown
Brown
White
Ivory
Grey
Brown
Red
18201-LB
18202-I
18202-B
18202-LB
18203-W
18203-I
18203-G
18203-B
18203-R
18821-LB
18222-I
18222-B
18222-LB
18223-W
18223-I
18223-G
18223-B
18223-R
—
—
—
—
—
—
—
—
—
Brown
Ivory
Grey
Brown
Red
18203-LB
18204-I
18204-G
18204-B
18204-R
18223-LB
18224-I
—
18224-B
—
—
—
—
—
—
Double Pole
Double Pole, Locking†
3-Way
3-Way, Locking†
4-Way
30A
—
—
—
—
—
†Key for Locking Switch: Cat. No. 55500-PRT.
NOTE: Cat. Nos. 18201, 18221, 1203, 1223, 18203 and 18223 feature external clamp-type wiring termination for back and side wiring.
628
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
TESTING AND CODE COMPLIANCE
• Meets all NEMA WD 1 & 6, and ANSI requirements
• Meets Federal Specification WS-896
• UL Listed (File #E-7458)
• CSA Certified (File #152105)
• NOM Certified (#057)
MECHANICAL
• Terminal I.D.: Brass-Hot, Black-Hot, White-Neutral,
Green-Grounding
•Terminal Accomm.: #14-#10 AWG back wired; #14-#12 AWG
side wired
• Product I.D.: Ratings are permanently stamped on device strap
• Torque Range: 12-14 inch pounds
MATERIAL CHARACTERISTICS
• Environmental: Flammability, Rated V2
• Operating Temperature: -40°C to 65°C
ELECTRICAL
• Dielectric Voltage: Withstands 1500V for 1 min.
• Overload UL 20 Test: 100 cycles of overload at 4.8 times
rated current
• Temp. Rise: 30° C max at full rated current
• Endurance: UL 20/Fed Spec 50,000 cycles min., tungsten
filament lamp load (Fed.Spec.) WS896E, SP, DP, 3-Way, 4-Way,
Pilot Light, Illum., Key Lock
HORSEPOWER
• 15A — 1⁄2 @ 120V, 2 @ 240V 12 AMP Max
• 20A — 1 @ 120V, 2 @ 240V 16 AMP Max
• 30A — 2 @ 120V, 2 @ 240V 24 AMP Max
DIMENSIONS
SINGLE-POLE
3-WAY
LOCKING
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
629
Switches
Industrial Grade
Maintained and Momentary Contact Extra Heavy-Duty
Specification Grade Toggle Switches
Specifications and Features
• Positive switching action with center-off position
• Large silver cadmium-oxide contacts for long life, prevent sticking, welding and excessive pitting
• Clamp-type terminals accept up to #10 CU wire
• Full rated current capacity on fluorescent, tungsten and resistive loads; motor load capacity up to 80%
switch current rating
• Backed by a Limited Ten-Year Warranty
BACK AND SIDE WIRED - MAINTAINED CONTACT U S
Description
Rating
Color
Single Pole, Double Throw, Center Off
White
Ivory
Grey
Brown
Red
Black
White
Ivory
Brown
Ivory
Black
1281-L
Single Pole, Double Throw, Locking†
Single Pole, Double Throw, Center Off
Double Pole, Double Throw, Locking†
15A
1281-W
1281-I
—
1281
—
1281-L
1282-W
1282-I
1282
—
—
Cat No.
120/277VAC
20A
1285-W
1285-I
1285-GY
1285
1285-R
1285-L
1286-W
1286-I
1286
—
—
30A
—
1287-I
—
1287
—
1287-L
1288-W
1288-I
1288
1288-LI
1288-L
†Key for Locking Switch: Cat. No. 55500-PRT.
BACK AND SIDE WIRED - MOMENTARY CONTACT U S
1285
Description
Rating
Color
Single Pole, Double Throw,
Center Off
White
Ivory
Grey
Brown
Red
Ivory
15A
1256-W
1256-I
1256-GY
1256
—
—
Brown
Brown
—
—
Single Pole, Double Throw,
Center Off, Locking†
Single Pole, Double Throw,
Center Off
1256
Cat No.
120/277VAC
20A
—
1257-I
—
1257
1257-R
1257-LI
1257-L
—
30A
—
—
—
1260*
—
—
—
1262*
†Key for Locking Switch: Cat. No. 55500-PRT.
CSA Certified except where indicated by*.
1257-L
630
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
TESTING AND CODE COMPLIANCE
• Meets all NEMA WD 1 & 6, and ANSI requirements
• Meets Federal Specification WS-896
• UL Listed (File #E-7458)
• CSA Certified (File #152105)
• NOM Certified (#057)
MECHANICAL
• Terminal I.D.: Brass-Hot, Black-Hot, White Neutral, Green
Grounding
•Terminal Accomm.: #14-#10 AWG back wired; #14-#12 AWG
side wired
• Product I.D.: Ratings are permanently stamped on device strap
• Torque Range: 12-14 inch pounds
MATERIAL CHARACTERISTICS
• Environmental: Flammability, Rated V2
• Operating Temperature: -40°C to 65°C
ELECTRICAL
• Dielectric Voltage: Withstands 1500V for 1 min.
• Overload UL 20 Test: 100 cycles of overload at
4.8 times rated current
• Temp. Rise: 30° C max at full rated current
• Endurance: UL 20/Fed Spec 50,000 cycles min., tungsten
filament lamp load (Fed.Spec.) WS896E, SP, DP, 3-Way, 4-Way,
Pilot Light, Illum., Key Lock
HORSEPOWER
• 15A — 1⁄2 @ 120V, 2 @ 240V 12 AMP Max
• 20A — 1 @ 120V, 2 @ 240V 16 AMP Max
• 30A — 2 @ 120V, 2 @ 240V 24 AMP Max
DIMENSIONS
SINGLE POLE
LOCKING
Pilot Light and Lighted Handle Extra Heavy-Duty
Specification Grade Toggle Switches
Specifications and Features
• Pilot light and lighted handle switches provide top performance in punishing industrial applications
• Lighted handle illuminated when load is OFF. Pilot light toggle illuminated when load is ON
• 120 and 277V versions in single pole and 3-Way
• Fully enclosed switch mechanism in rugged housing for strength, track and arc resistance
• Self-grounding clip (self-grounding when used with a grounded metal wallbox)
• Backed by a Limited Ten-Year Warranty
BACK AND SIDE WIRED - PILOT LIGHT U S
Description
Rating
Single Pole
Double Pole
3-Way
Colors
Clear
Red
Green
Clear
Red
Green
Clear
Red
Green
15A - 120V
1201-PLC
1201-PLR
1201-PLG
−
1202-PLR
−
1203-PLC
1203-PLR
1203-PLG
For technical support call 800-824-3005
Cat No.
20A - 120V
20A - 277V
1221-PLC
1221-7PC
1221-PLR
1221-7PR
1221-PLG
−
1222-PLC
−
1222-PLR
1222-7PR
1222-PLG
−
1223-PLC
−
1223-PLR
1223-7PR
1223-PLG
−
30A - 120V
3031-PLC
3031-PLR
−
3032-PLC
3032-PLR
−
1201-PLC
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
631
Switches
Industrial Grade
BACK AND SIDE WIRED - LIGHTED HANDLE U S
Description
Rating
Single Pole
3-Way
Color
Clear
White
Ivory
Clear
White
Ivory
15A - 120V
1201-LHC
1201-LHW
1201-LHI
1203-LHC
1203-LHW
1203-LHI
Cat No.
20A - 120V
20A - 277V
1221-LHC
1221-7LC
1221-LHW
1221-7LW
1221-LHI
1221-7LI
1223-LHC
1223-7LC
1223-LHW
1223-7LW
1223-LHI
1223-7LI
30A - 120V
−
−
3031-LHI
1201-LHI
TESTING AND CODE COMPLIANCE
• Meets all NEMA WD 1 & 6, and ANSI requirements
• Meets Federal Specification WS-896
• UL Listed (File #E-7458)
• CSA Certified (File #152105)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
• Environmental: Flammability, Rated V2
• Operating Temperature: -40°C to 65°C
1222-PLR
ELECTRICAL
• Dielectric Voltage: Withstands 1500V for 1 min.
• Overload UL 20 Test: 100 cycles of overload at
4.8 times rated current
• Temp. Rise: 30° C max at full rated current
• Endurance: UL 20/Fed Spec 50,000 cycles min.,
tungsten filament lamp load (Fed.Spec.) WS896E,
SP, DP, 3-Way, 4-Way, Pilot Light, Illum., Key Lock
MECHANICAL
• Terminal I.D.: Brass-Hot, Black-Hot, White-Neutral,
Green-Grounding
•Terminal Accomm.: #14-#10 AWG back wired;
#14-#12 AWG side wired
• Product I.D.: Ratings are permanently stamped
on device strap
• Torque Range: 12-14 inch pounds
HORSEPOWER
• 15A — 1⁄2 @ 120V, 2 @ 240V 12 AMP Max
• 20A — 1 @ 120V, 2 @ 240V 16 AMP Max
• 30A — 2 @ 120V, 2 @ 240V 24 AMP Max
1223-LHW
DIMENSIONS
SINGLE POLE
632
3-WAY
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Industrial Grade
Extra Heavy-Duty Specification Grade Key Locking Switches
Specifications and Features
• Heavy-Duty key-operated locking mechanism for maximum tamper-proof operation in schools, institutions,
public housing, trailer parks, loading docks, freight yards and other areas
• Chrome lock dome with 2 keys provided per switch
• Back and side wire terminals accept up to #14 – #10 AWG copper or copper clad wire
• Large, combination head terminal screws with external clamps
• Triple-combination mounting screws for fast, easy installation
• Heavy-gauge rust-resistant mounting strap with steel grounding screw and self-grounding clip (self grounding
when used in a properly grounded metal wallbox)
• Key removable in ON or OFF positions
• Backed by a Limited Ten-Year Warranty
6197,
6197-I,
6197-W
KEY LOCKING SWITCHES U S
Description
Color
Cat No.
Rating
Single-Pole Key Lock Power Switch, 2 keys provided
Double-Pole Key Lock Power Switch, 2 keys provided
3-Way Key Lock Power Switch, 2 keys provided
4-Way Key Lock Power Switch, 2 keys provided
Replacement Keys, 2 per pack
Nickel Plated
Nickel Plated
Nickel Plated
Nickel Plated
20A - 120/277VAC
1221-2KL
1222-2KL
1223-2KL
1224-2KL
2KL
Note: Key Lock Power Switches are not recommended for use on Master or Emergency Power Systems.
WALLPLATES AND WALLBOXES
Description
302 Stainless Steel comes with tamper-resistant screws and spanner tool
FD or Deep Wallbox recommended minimum internal depth
23/4” single cover/gang adapter extends shallow wallbox,
use with stainless wallplate
1-Gang
2-Gang
3-Gang
Cat. No.
FD/Deep
Wallbox
84071-40
84072-40
84073-40
Related Products
Leviton offers a complete line of wallplates.
See page 707 for more information.
84701-40
1221-2KL
w/two keys
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
633
Switches
Industrial Grade
TESTING AND CODE COMPLIANCE
• Meets all NEMA WD 1 & 6, and ANSI requirements
• Meets Federal Specification WS-896
• UL Listed (File #E-7458)
• CSA Certified (File #152105)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
• Environmental: Flammability, Rated V2
• Operating Temperature: -40°C to 65°C
HORSEPOWER
• 20A, 1 @ 120V, 2 @ 240V, 16 AMP Max
ELECTRICAL
• Dielectric Voltage: Withstands 1500V for 1 min.
• Overload UL 20 Test: 100 cycles of overload at
4.8 times rated current
• Temp. Rise: 30° C max at full rated current
• Endurance: UL 20/Fed Spec 50,000 cycles min.,
tungsten filament lamp load (Fed. Spec.)
WS896E, SP, DP, 3-Way, 4-way, Pilot Light,
Illum., Key Lock
MECHANICAL
• Terminal I.D.: Brass-Hot, Black-Hot, White-Neutral,
Green-Grounding
• Terminal Accomm.: #14-#10 AWG back wired;
#14-#12 AWG side wired
• Product I.D.: Ratings are permanently stamped
on device strap
• Torque Range: 12-14 inch pound
Related Products
To review the complete Leviton Wallplates collection see the
Leviton Wallplates Section beginning on page 707.
DIMENSIONS
1P
84071
84072
634
For technical support call 800-824-3005
2P
3-WAY
4-WAY
84073
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Commercial Grade
Decora Plus™ AC Quiet Commercial Specification Grade Rocker Switches
Decora Plus devices combine designer styling with all the benefits of rugged Commercial Grade construction.
The robust product offering includes: single pole, double pole, 3 and 4-way switches, momentary and maintained
contact switches, as well as pilot light and illuminated switches.
Specifications and Features
• Engineered for fine tolerances and top performance
• Decora Plus Switches feature impact resistant thermoplastic construction for long service life
• All Decora devices meet or exceed applicable UL, CSA and NOM testing standards
AC Quiet Rocker Switches
• Full rated current capacity with tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating
• Back and side-wiring terminals accept both solid and stranded wire to ease installation
• New architecturally-styled smooth-action concave rocker
• Heavy-duty impact-resistant thermoplastic construction for long service life in commercial applications
• Two ground connection options: a green grounding screw and a self-grounding clip
• Backed by a Limited Ten-Year Warranty
Canadian Switches
• Decora Plus Canadian switches fit only those wallplates designated
• Canadian Decora wallplates available in a number of colors and fit “Commander Type” boxes
One-piece wrap-around heavy gauge
steel strap incorporates locking tabs
for extra strength
Triple combination-head mounting screws
(straight slot, Phillips and Robertson head)
Decora Plus Switches have
patented concave rockers that
present a low profile
Decora Plus Switches feature back
and side wiring terminals and accept
both stranded and solid conductors
Self-grounding clip
5691-2
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
635
Switches
Commercial Grade
BACK AND SIDE WIRED U S
Description
Color
Rating
Single Pole
Double Pole
5691-2GY
3-Way
4-Way
Cat No.
120/277VAC
White
Ivory
Light Almond
Grey
Black
Brown
Red
White
Ivory
Light Almond
Grey
Black
White
Ivory
Light Almond
Grey
Black
Brown
Red
White
Ivory
Light Almond
Grey
Brown
15A
5691-2W
5691-2I
5691-2T
5691-2GY
5691-2E
5691-2
—
20A
5621-2W
5621-2I
5621-2T
5621-2GY
5621-2E
5621-2
5621-2R
5622-2W
5622-2I
5622-2T
5622-2GY
5622-2E
5623-2W
5623-2I
5623-2T
5623-2GY
5623-2E
5623-2
5623-2R
5624-2W
5624-2I
5624-2T
5624-2GY
5624-2
5693-2W
5693-2I
5693-2T
5693-2GY
5693-2E
5693-2
BACK AND SIDE WIRED - CANADIAN S
Description
Color
Cat No.
Rating
Single Pole
3-Way
5693-2A
636
4-Way
347VAC
White
Ivory
Almond
Grey
Black
White
Ivory
Almond
Grey
Black
White
15A
5691-CW
5691-CI
5691-CA
5691-CG
5691-CE
5693-CW
5693-CI
5693-CA
—
5693-CE
5694-CW
For technical support call 800-824-3005
20A
5621-CW
5621-CI
—
5621-CG
—
5623-C2W
—
−—
5623-C2G
5624-CW
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Commercial Grade
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-7458)
• CSA Certified (File #LR-3413)
• NOM Certified (#057)
• Compliance with the latest Federal Specification WS-896
HORSEPOWER
• 15A – 1⁄2 @ 120V, 2 @ 240V
• 20A – 1 @ 120V, 2 @ 240V
MATERIAL CHARACTERISTICS
• Environmental: Flammability, UL-94 V2 Rating
• Operating Temperature: -40°C to 120°C
ELECTRICAL
• Dielectric Voltage: Withstands 1500V for 1 min.
• Overload UL 20 Test: 100 cycles of overload at 4.8 times
rated current
• Temp. Rise: 30° C max at full rated current
• Endurance: UL 20/Fed Spec 50,000 cycles min., tungsten
filament lamp load (Fed. Spec.) WS896E, SP, DP, 3-Way, 4-way,
Pilot Light, Illum., Key Lock
MECHANICAL
• Terminal I.D.: Brass-Hot, Black-Hot, White-Neutral,
Green-Grounding
• Terminal Accomm.: #14-#10 AWG back wired; #14-#12 AWG
side wired
• Product I.D.: Ratings are permanently stamped on device strap
• Torque Range: 12-14 inch pounds
DIMENSIONS
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
637
Switches
Commercial Grade
Decora Plus™ Maintained and Momentary Contact Switches
Specifications and Features
• Full rated current capacity with tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating
• Wrap-around heavy-gauge strap with locking tabs for added strength
• Back and side-wiring terminals accept both solid and stranded wire to ease installation
• Backed by a Limited Ten-Year Warranty
BACK AND SIDE WIRED - MOMENTARY CONTACT U S
Description
Rating
Single Pole,
Double Throw,
Center Off
5657-2W
Color
Cat No.
White
Ivory
Light Almond
Grey
Black
Brown
15A - 120/277VAC
5657-2W
5657-2I
5657-2T
5657-2GY
5657-2E
5657-2
BACK AND SIDE WIRED - MAINTAINED CONTACT U S
Description
Rating
Single Pole,
Double Throw,
Center Off
Double Pole,
Double Throw,
Center Off
Color
Cat No.
White
Ivory
Light Almond
Grey
Black
Brown
White
Ivory
Light Almond
15A - 120/277VAC
5685-2W
5685-2I
5685-2T
5685-2GY
5685-2E
5685-2
5686-2W
5686-2I
5686-2T
5686-2I
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-7458)
• CSA Certified (File #LR-3413)
• NOM Certified (#057)
• Meets requirements of latest Federal Specification WS-896
HORSEPOWER
• 15A – 1⁄2 @ 120V, 2 @ 240V
MATERIAL CHARACTERISTICS
• Environmental: Flammability, UL-94 V2 Rating
• Operating Temperature: -40°C to 120°C
638
ELECTRICAL
• Dielectric Voltage: Withstands 1500V for 1 min.
• Overload UL 20 Test: 100 cycles of overload at 4.8 times
rated current
• Temp. Rise: 30° C max at full rated current
• Endurance: UL 20/Fed Spec 50,000 cycles min., tungsten
filament lamp load (Fed.Spec.) WS896E, SP, DP, 3-Way, 4-Way,
Pilot Light, Illum., Key Lock
MECHANICAL
• Terminal I.D.: Brass-Hot, Black-Hot, White-Neutral,
Green-Grounding
• Terminal Accomm.: #14-#10 AWG back wired; #14-#12 AWG
side wired
• Product I.D.: Ratings are permanently stamped on device strap
• Torque Range: 12-14 inch pounds
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Commercial Grade
DIMENSIONS
5685
5686
Decora Plus™ Commercial Specification Grade Iluminated and Pilot Light Switches
Specifications and Features
• Illuminated when load is OFF
• Pilot Light rocker visible when load is ON, even in bright light
• Back and side-wiring terminals accept both solid and stranded wire to ease installation
• Two ground connection options: a green grounding screw and a self-grounding clip
BACK AND SIDE WIRED - ILLUMINATED* U S
Description
Rating
Single Pole
3-Way
Color
Cat No.
Cat. No.
White
Ivory
Light Almond
Black
White
Ivory
Light Almond
20A- 120VAC
5631-2W
5631-2I
5631-2T
5631-2E
5633-2W
5633-2I
5633-2T
20A- 277VAC
5649-2W
—
—
—
5659-2W
—
—
5631-2W
*Does not require a neutral wire.
BACK AND SIDE WIRED - PILOT LIGHT* U S
Description
Rating
Single Pole
3-Way
Color
Cat No.
Cat. No.
White
Ivory
Light Almond
Brown
White
Ivory
20A- 120VAC
5628-2W
5628-2I
5628-2T
5628-2
5638-2W
5638-2I
20A- 277VAC
5629-2W
—
—
—
5639-2W
—
5628-2A
*Requires a neutral wire.
5638-2W
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
639
Switches
Commercial Grade
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-7458)
• CSA Certified (File #LR-3413)
• NOM Certified (#057)
• Compiance with the latest Federal Specification WS-896
HORSEPOWER
• 20A – 1 @ 120V, 2 @ 240V
MATERIAL CHARACTERISTICS
• Environmental: Flammability, UL-94 V2 Rating
• Operating Temperature: -40°C to 120°C
ELECTRICAL
• Dielectric Voltage: Withstands 1500V for 1 min.
• Overload UL 20 Test: 100 cycles of overload at 4.8 times
rated current
• Temp. Rise: 30° C max at full rated current
• Endurance: UL 20/Fed Spec 50,000 cycles min., tungsten
filament lamp load (Fed.Spec.) WS896E, SP, DP, 3-Way, 4-Way,
Pilot Light, Illum., Key Lock
MECHANICAL
• Terminal I.D.: Brass-Hot, Black-Hot, White-Neutral,
Green-Grounding
• Terminal Accomm.: #14-#10 AWG back wired; #14-#12 AWG
side wired
• Product I.D.: Ratings are permanently stamped on device strap
• Torque Range: 12-14 inch pounds
DIMENSIONS
640
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Commercial Grade
AC-Quiet Commercial Specification Grade Switches
Leviton’s Commercial Specification Grade switches are designed to offer outstanding reliability and top
performance in commercial settings. Ideal applications include municipal facilities, government buildings, malls,
department stores, hospital and health care facilities, office buildings, schools, colleges, universities, houses of
worship and cultural institutions. Leviton offers a large selection of 15 and 20 Amp Commercial switches, available
in a wide variety of colors, wiring options and other features.
Specifications and Features
• Listed UL Federal Specification, WS 896
• Heavy-duty pre-plated steel mounting strap for maximum strength
• All screws are brass combination-head for fast installation with Standard, Phillips, and Robertson head screwdrivers
• External clamp-type wiring terminals provides secure connection of solid or stranded wire for back or side wiring
(CSB1 and CSB3)
• Backed by a Limited Ten-Year Warranty
CSB1-15I
Heavy-duty pre-plated
steel mounting strap
Large, brass triple-drive
combination screws for
fast wiring and installation
Large switch contacts for
maximum conductivity
External clamp-type terminal
provides secure connection for
back and side wiring
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
641
Switches
Commercial Grade
BACK AND SIDE WIRED U S
Description
Color
Cat. No.
Rating
Single Pole
Double Pole
CSB1-20
3-Way
4-Way
120/277V AC
White
Ivory
Light Almond
Grey
Brown
White
Ivory
Light Almond
Grey
Brown
White
Ivory
Light Almond
Grey
Brown
White
Ivory
Grey
Brown
15A
CSB1-15W
CSB1-15I
CSB1-15T
CSB1-15G
CSB1-15
CSB2-15W
CSB2-15I
CSB2-15T
—
CSB2-15
CSB3-15W
CSB3-15I
CSB3-15T
—
CSB3-15
CSB4-15W
CSB4-15I
—
CSB4-15
20A
CSB1-20W
CSB1-20I
CSB1-20T
CSB1-20G
CSB1-20
CSB2-20W
CSB2-20I
CSB2-20T
CSB2-20G
CSB2-20
CSB3-20W
CSB3-20I
CSB3-20T
CSB3-20G
CSB3-20
CSB4-20W
CSB4-20I
CSB4-20G
CSB4-20
NOTE: Cat. Nos. CSB1 and CSB3 feature external clamp-type wiring termination for back and side wiring.
SIDE WIRED U S
CSB3-20G
Description
Color
Cat. No.
Rating
Single Pole
Single Pole
Hospital Call Switch†
Single Pole, Framed
Toggle
Double Pole
CS120-2W
Double Pole
Hospital Call Switch†
Double Pole, Framed
Toggle
120/277V AC
White
Ivory
Light Almond
Grey
Black
Brown
Ivory
15A
CS115-2W
CS115-2I
CS115-2T
CS115-2GY
CS115-2E
CS115-2
5501-8I
20A
CS120-2W
CS120-2I
CS120-2T
CS120-2G
CS120-2E
CS120-2
—
Brown
White
Ivory
Grey
Brown
White
Ivory
Light Almond
Grey
Black
Brown
Ivory
5501-8
54501-2W
54501-2I
54501-2GY
54501-2
CS215-2W
CS215-2I
—
CS215-2GY
—
CS215-2
5502-8I
—
54521-2W
54521-2I
54521-2GY
54521-2
CS220-2W
CS220-2I
CS220-2T
CS220-2GY
CS220-2E
CS220-2
—
White
Ivory
Brown
54502-2W
54502-2I
54502-2
54522-2W
54522-2I
54522-2
†Hospital Call Switch turns on when toggle is pulled down with cord (3-ft braided cord included).
642
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Commercial Grade
Description
Color
Cat. No.
Rating
3-Way
3-Way, Framed
Toggle
4-Way
4-Way, Framed
Toggle
120/277V AC
White
Ivory
Light Almond
Grey
Black
Brown
White
Ivory
Grey
Brown
White
Ivory
Light Almond
Grey
Black
Brown
White
Ivory
Light Almond
Grey
Brown
15A
CS315-2W
CS315-2I
CS315-2T
CS315-2GY
−
CS315-2
54503-2W
54503-2I
54503-2GY
54503-2
CS415-2W
CS415-2I
CS415-2T
CS415-2GY
−
CS415-2
54504-2W
54504-2I
54504-2T
54504-2GY
54504-2
20A
CS320-2W
CS320-2I
CS320-2T
CS320-2GY
CS320-2E
CS320-2
54523-2W
54523-2I
54523-2GY
54523-2
CS420-2W
CS420-2I
CS420-2T
CS420-2GY
CS420-2E
CS420-2
54524-2W
54524-2I
−
54524-2GY
54524-2
54501
†Hospital Call Switch turns on when toggle is pulled down with cord (3-ft braided cord included).
SIDE WIRED - LIGHTED U S
Description
Rating
Single Pole
3-Way
Color
Cat No.
White
Ivory
White
Ivory
15A - 120VAC
5501-LHW
5501-LHI
5503-LHW
5503-LHI
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
643
Switches
Commercial Grade
SIDE WIRED - CANADIAN S
Description
Colors
Rating
Single Pole, Framed
Toggle
Double Pole, Framed
Toggle
1101-CG
3-Way, Framed
Toggle
4-Way, Framed
Toggle
White
Ivory
Grey
Black
Brown
White
Ivory
Brown
White
Ivory
Grey
Brown
White
Ivory
Grey
Black
Brown
TESTING AND CODE COMPLIANCE
• Meets all NEMA WD 1& 6, and ANSI requirements
• Meets Federal Specification WS-896
• UL Listed (File #E-7458)
• CSA Certified (File #152105)
• NOM Certified (#057)
HORSEPOWER
• 15A – 1 @ 120V, 2 @ 240V 12 AMP Max
• 20A – 1 @ 120V, 2 @ 240V 16 AMP Max
MATERIAL CHARACTERISTICS
• Environmental: Flammability, V2 Rating
• Operating Temperature: -40°C to 120°C
644
Cat No.
Cat No.
120/277VAC
347VAC
15A
1101-CW
1101-CI
1101-CG
1101-CE
1101-CB
1102-CW
1102-CI
1102-CB
1103-CW
1103-CI
1103-CG
1103-CB
1104-CW
1104-CI
—
1104-CE
1104-CB
20A
—
54521-2I
—
—
54521-2
54522-2W
54522-2I
54522-2B
—
54523-2I
—
54523-2B
—
54524-2I
—
—
54524-2B
15A
18201-CW
18201-CI
18201-CG
—
18201-CB
18202-CW
18202-CI
18202-CB
18203-CW
18203-CI
18203-CG
18203-CB
18204-CW
18204-CI
18204-CG
—
18204-CB
ELECTRICAL
• Dielectric Voltage: Withstands 1500V for 1 min.
• Overload UL 20 Test: 100 cycles of overload at 4.8 times
rated current
• Temp. Rise: 30° C max at full rated current
• Endurance: UL 20/Fed Spec 50,000 cycles min., tungsten
filament lamp load (Fed. Spec.) WS896E, SP, DP, 3-Way,
4-Way, Pilot Light, Illum., Key Lock
MECHANICAL
• Terminal I.D.: Brass-Hot, Black-Hot, White-Neutral,
Green-Grounding
• Terminal Accomm.: #14-#10 AWG back wired; #14-#12 AWG
side wired
• Product I.D.: Ratings are permanently stamped on device strap
• Torque Range: 12-14 inch pound
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Commercial Grade
DIMENSIONS
CSB1 Series
CSB3 Series
54501
CS115
54521
54523
5501-LHI
For technical support call 800-824-3005
5503-LHW
18201-C
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
645
Switches
Residential Grade
Decora® Switches
Featuring a look and feel that qualify them as modern classics, Decora Designer Rocker Switches add so much
at a modest cost that no fine home should be without them. Their sleek simplicity and smooth, quiet operation
stem from quality materials fitted to tight tolerances and finished with great care, ensuring years of trouble-free
service. Easy to wire, they work with tungsten, fluorescent and resistive loads. From legendary Decora® Designer
Rocker Switches to traditional toggle switches, Leviton has a switch for any need, in colors to harmonize with any
décor. Their sturdy construction and dependable performance are everything you’d expect from the pre-eminent
switch maker.
Specifications and Features
All Decora Switches
• Switch frame shields against dust and fits in wallplate to prevent rocker binding
• Terminal screws accept up to No. 12 AWG copper or copper-clad wire
• Quickwire® push-in terminals accept No. 14 AWG solid copper wire only
• Sturdy construction for long service life
• Full-rated current capacity with tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating
• Complements every décor
• Limited Two-Year Warranty
Illuminated Decora Switches
• Illuminated switch rocker illuminates when load is OFF
• Pilot Light switch rocker visible when load is ON, even in bright light
• Illuminated switch does not require a neutral; Pilot Light Switch requires a neutral
Imprinted Decora Switches
• Stock Decora switches available with choice of three imprints on rocker: FAN, DISPOSAL, OIL BURNER
DECORA COLORS
White
(-W)
646
Ivory
( -I )
Almond
(-A)
Lt. Almond
(-T)
Grey
(-GY)
Black
(-E)
Brown
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Residential Grade
QUICKWIRE PUSH-IN AND SIDE WIRED* U S
Description
Rating
Color
Cat No.
Single Pole
White
Ivory
Almond
Light Almond
Grey
Black
Brown
White
Ivory
Almond
Light Almond
Grey
Black
Brown
White
Ivory
Almond
Light Almond
Grey
Black
Brown
White
Ivory
Almond
Light Almond
Grey
Black
Brown
15A - 120/277VAC
Self-grounding*
w/Ground Screw
w/Ground Screw
—
5601-2W
—
5601-2I
—
5601-2A
—
5601-2T
—
5601-2GY
—
5601-2GE
—
5601-2
5602-2W
—
5602-2I
—
5602-2A
—
5602-2T
—
5602-2GY
—
5602-2E
—
5602-2
—
5603-2W
—
5603-2I
—
5603-2A
—
5603-2T
—
5603-2GY
—
5603-2E
—
5603-2
5604-2W
—
5604-2I
—
5604-2A
—
5604-2T
—
5604-2GY
—
5604-2E
—
5604-2
—
Double Pole
3-Way
4-Way
5601-2W
5603-2E
*Self-grounding when installed in a properly grounded metal box.
5603-2GY
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
647
Switches
Residential Grade
QUICKWIRE AND SIDE WIRED - ILLUMINATED* U S
Description
Rating
Color
Single Pole
White
Ivory
Almond
Light Almond
Brown
White
Ivory
Almond
Light Almond
Brown
White
Ivory
Almond
Light Almond
Brown
3-Way
5611-2A
4-Way
Cat. No.
15A-120/277VAC
non-grounded
5611-W
5611-I
—
—
5611
5613-W
5613-I
—
—
5613
5614-W
5614-I
—
—
5614
Cat. No.
15A-120/277VAC
with ground screw
5611-2W
5611-2I
5611-2A
5611-2T
5611-2
5613-2W
5613-2I
5613-2A
5613-2T
5613-2
5614-2W
5614-2I
5614-2A
5614-2T
5614-2
*Lens illuminated when load is OFF – does not require a neutral wire.
QUICKWIRE AND SIDE WIRED - PILOT LIGHT* U S
Description
Rating
Color
Single Pole
White
Ivory
Almond
Light Almond
5601-Z2W
Cat. No.
15A-120VAC
with ground screw
5618-2W
5618-2I
5618-2A
5618-2T
*Lens illuminated when load is OFF – does not require a neutral wire.
QUICKWIRE AND SIDE WIRED - IMPRINTED U S
Description
Color
Stock
Messages
Rating
Single Pole, Stock
or Custom Print
White
Ivory
FAN, DISPOSAL,
OIL BURNER
Cat. No.
15A-120/277VAC
with ground screw
5601-Z2W
5601-Z2I
NOTE: For Quickwire and Side Wired Molded made to order products, contact your Leviton sales representative.
911-W
648
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Residential Grade
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-7458)
• CSA Certified (File #LR-3413)
• NOM Certified (#057)
HORSEPOWER
• 15A – 1/2 @ 120V, 2 @ 240V
MATERIAL CHARACTERISTICS
• Environmental: Flammability, UL-94, Rated V2
• Operating Temperature: -40°C to 120°C
DIMENSIONS
5601
For technical support call 800-824-3005
5603
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
649
Switches
Residential Grade
AC Quiet Toggle Switches
Tried-and-true toggle designs, Leviton Residential Grade AC Quiet Switches cover all the bases; they install
easily and are available in standard and illuminated versions.Their toggles and frames are constructed of
impact-resistant thermoplastic, and they feature large head, hardened triple-drive screws for easy installation.
Leviton’s traditional switches are compatible with a wide range of Leviton plastic and metal wallplates.
Specifications and Features
• Faster installation with combination of side wiring and Quickwire push-in wiring
• Terminal screws accept up to No. 12 AWG copper or copper-clad wire
• Quickwire® push-in terminals accept No. 14 AWG solid copper wire only
• Large head, hardened triple-drive combination screws (Standard, Phillips, or Robertson) for fast wiring installation
• Impact-resistant, durable thermoplastic toggle and frame
• Limited Two-Year Warranty
650
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Residential Grade
QUICKWIRE PUSH-IN AND SIDE WIRED U S
Description
Rating
Color
Cat No.
15A-120VAC
non-grounded
Cat No.
15A-120VAC
with ground screw
Single Pole
White
Ivory
Almond
Light Almond
Black
Brown
White
Ivory
Almond
Light Almond
Black
Brown
White
Ivory
Almond
Light Almond
Black
Brown
1451-W
1451-I
−
−
−
1451
1453-W
1453-I
−
−
−
1451
1451-2W
1451-2I
1451-2A
1451-2T
1451-2E
1451-2
1453-2W
1453-2I
1453-2A
1453-2T
1453-2E
1453-2
54504-2W
54504-2I
54504-2A
54504-2T
54504-2GY
54504-2
3-Way
4-Way
Cat No.
15A-120VAC
Self-grounded
Backwired Clamp
RS115-W
RS115-I
RS115-T
1451
QUICKWIRE AND SIDE WIRED - ILLUMINATED U S
Description
Rating
Toggle Color
Single Pole
3-Way
Clear
Clear
Illumination
Cat No.
15A-120VAC
with ground screw
1461-LHC
1463-LHC
Amber
Amber
1453
CO/ALR SIDE WIRED - FRAMED U S
Description
Rating
Color
Single Pole
White
Ivory
White
Ivory
3-Way
Cat No.
15A-120VAC
with ground screw
2651-2W
2651-2I
2653-2W
2653-2I
NOTE: CO/ALR devices are for connection to 12 or 10 AWG Aluminum Conductors.
1461-LHC
2651-2
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
651
Switches
Residential Grade
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-7458)
• CSA Certified (File #LR-3413)
• NOM Certified (#057)
HORSEPOWER
• 15A – 1/2 @ 120V, 2 @ 240V
MATERIAL CHARACTERISTICS
• Environmental: Flammability, Rated V2
• Operating Temperature: -40°C to 65°C
DIMENSIONS
Traditional Switch
652
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Switches
Residential Grade
Appliance Switches
Specifications and Features
Single Pole Pull Chain Switches
• Standard finish of metal chain is nickel
• Standard leads are No. 18 AWG 105°C plastic 6” long, stripped 1/2”
• 33/4” chain connector, 3’ braided cord, end bell
• Bushing 3/8 - 27 x 3/8” long
• Piercing 13/32” dia
Door Jamb Switch
• Bushing 15/32-32 x 9/16” long
SINGLE POLE PULL CHAIN SWITCHES U S
Description
Rating
Heavy Duty, Single Circuit,
Black and Red Leads
Heavy Duty, Two Circuit,
Four Positions,
Black, Blue, Red Leads
Heavy Duty, Two Speed,
Four Positions,
Black, Blue, Red Leads
Rating
Compact, Single Circuit,
Black Leads
Rating
Compact, Single Circuit,
Black Leads
Sequence
3A 125VAC-L
6A 125VAC
3A 250VAC
1⁄4 HP 125/250V
ON-OFF (L1, OFF)
Cat. No.
LOW-MED-HIGH-OFF
(L1, L2, L1 & 2, OFF)
1689-50
ONE-OFF-TWO-OFF
(L1, L2, L3, OFF)
1691-50
1689-75
1689-75
3A 125V
1A 125VT
1A 250V
ON-OFF
10097-8
3A 125VAC-L
6A 125VAC
3A 250VAC
ON-OFF
10041-500
10041-500
10097-8
PUSH-BUTTON DOOR JAMB SWITCH U S
Description
Sequence
Cat. No.
Rating
Single Circuit, Momentary, Metal Pushbutton,
No. 18AWG Leads, with Jamb Box,
Mounting Screws and Cover Plate
3A 125V
NORMALLY ON
1865
1865
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
653
Switches
Residential Grade
FEED-THROUGH CORD SWITCH U S
Description
5410-W
Sequence
Rating
Heavy Duty, Single Pole, 18/2 – 16/2 Type SPT-1,
SPT-2 or Round Cord 18/2, Type SVT and other
cords up to 9⁄32” outer jacket
ON-OFF
Color
Cat. No.
White
Ivory
3A 125V 1⁄2 H.P. 125V
5410-W
5410-I
Brown
5410
MINIATURE FEED-THROUGH CORD SWITCH U S
Description
Rating
Miniature Single Pole, ON-OFF Sequence,
Captive Screw (for use with #18 ga. SPT-1 conductors)
Color
Cat. No.
White
Ivory
Brown
3A 125V 1⁄2 H.P. 125V
423-3W
423-3I
423-3
423-31
TESTING AND CODE COMPLIANCE
• UL Recognized Component (File #E-7458) - Cat. Nos. 1689
75, 1689-50, 1691-50, 10041-500
• UL Listed (File #E-7443) - Cat Nos. 10097-8 and 1865
• UL Listed (File #E-7458) - Cat Nos. 5410 and 423-3
• CSA Certified (File #LR-3413)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
• Environmental: Flammability, UL-94, Rated V2
• Operating Temperature: -40°C to 120°C
DIMENSIONS
1689-75 Heavy Duty Pull Chain Switch
10097-8 Compact Pull Chain Switch
5410 Feed Through Switch
654
For technical support call 800-824-3005
Online catalog available at leviton.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement