FUSION SPLICE PROTECTION

FUSION SPLICE PROTECTION
Corning
Cable Systems
Fusion Splice Protection
A LANscape® Solutions Product
Description
Corning Cable Systems offers a variety of splice protection
choices to meet your needs. All the types of protection pictured and described here allow individual fiber access in the
splice tray. Corning Cable Systems offers heat-shrink protection in both single-fiber and multifiber versions.
Heat-Shrink Single- or Multifiber Splice Protector
Heat-shrinkable splice protection continues to be the most
popular method to protect fusion splices. The sleeve securely
protects the fusion splice on either 250 or 900 µm coated
fibers, while offering individual access to each fusion splice. To
use, slide the heat-shrink sleeve over the fiber and then make
the splice. Reposition the heat-shrink sleeve directly over the
splice and place it in the heat-shrink oven. After the specified
heating time (depending on sleeve type), the splice is secure
and ready to be transferred to the splice tray. Corning Cable
Systems heat-shrink sleeves are compatible with most splice
trays offered and are compatible with all heat-shrink ovens
offered with Corning Cable Systems fusion splicers. Corning
Cable Systems offers both single-fiber and multifiber heatshrink sleeves.
Splice Pak™ Splice Protector | Photo SEH43
Splice Pak Single-Fiber Splice Protector
The Splice Pak Splice Protector is a cost-effective alternative
to the heat-shrink protective sleeve. It is a plastic “clam-shell”
design with an adhesive applied to the inside surface. The
Splice Pak Splice Protector requires no power for assembly,
thus extending the battery life of the fusion splicer. The Splice
Pak Splice Protector is offered in three types for different
fiber diameters combinations. To use, simply insert the Splice
Pak Splice Protector into the crimp device, then transfer the
completed splice into the device and crimp.
Crimp & Go® Single-Fiber Splice Protection Crimping Device
The Crimp & Go Splice Protection Crimping Device encloses
the splice within an aluminum sleeve sealed with an elastic
material. Like the Splice Pak Splice Protector, the Crimp &
Go Splice Protection Crimping Device requires no power for
assembly, thus extending the battery life of the fusion splicer.
To use, insert the Crimp & Go Splice Protection Crimping
Device into the crimp device, then transfer the completed
splice into the device and crimp.
1
Product Specifications
Corning
Cable Systems
Fusion Splice Protection
A LANscape® Solutions Product
Specifications
Parameter
Specification
Heat-Shrink Splice Protector Sleeve
Dimensions (Length)
Single-Fiber Sleeve: 40 or 60 mm lengths
Multifiber Sleeve: 40 mm length
Fiber Diameter
250 or 900 µm
Bare Fiber Length
Not more than 30 or 50 mm (based on length of sleeve)
Shrink Temperture
Single-Fiber Sleeve: 120°C
Multifiber Sleeve: 140°C
Heating Time
Single-Fiber Sleeve: Approximately 60 seconds
Multifiber Sleeve: Approximately 80 seconds
Splice Pak™ Splice Protector
Dimensions (Closed)
HxWxL
2.0 x 3.2 x 35.0 mm
Fiber Diameter
Varies depending on part number: 250/250 µm; 250/900 µm; 900/900 µm
Bare Fiber Length
Not more than 25 mm
Handling Temperature
Range
-5° to +45°C
Crimp & Go® Splice Protection Crimping Device
Dimensions (Closed)
HxWxL
1.1 x 3.2 x 30.0 mm
Fiber Diameter
Not more than 250 µm
Bare Fiber Length
Not more than 25 mm
Handling Temperature
Range
-5° to +45°C
Ordering Information
Part Number
Description
2806031-01
Heat-Shrink Fusion Splice Protector Parts, single-fiber (package of 50; 60 mm long)
2806032-01
Heat-Shrink Fusion Splice Protector Parts, single-fiber (package of 50; 40 mm long)
2806031-04
Heat-Shrink Mass Splice Protector Parts, 2- or 4-fiber ribbon (package of 25; 40 mm long)
2806031-012
Heat-Shrink Mass Splice Protector Parts, 6- or 12-fiber ribbon (package of 25; 40 mm long)
FSA-012
Crimp & Go Splice Protection Crimping Device Parts (150/pack)
A0276859
Splice Pak Splice Protector, yellow, 250/250 µm (25/pack)
A0295149
Splice Pak Splice Protector, blue, 250/900 µm (25/pack)
A0295150
Splice Pak Splice Protector, green, 900/900 µm (25/pack)
Heat-shrink ovens and crimping tools can be ordered separately. Please contact your Corning Cable Systems Customer Service Representative for details.
Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA
1-800-743-2675 • FAX: +1-828-901-5973 • International: +1-828-901-5000 • http://www.corning.com/cablesystems
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products
without prior notification. Crimp & Go and LANscape are registered trademarks of Corning Cable Systems Brands, Inc. Splice Pak is a trademark
of Corning Cable Systems Brands, Inc. Discovering Beyond Imagination is a trademark of Corning Incorporated. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. © 2001, 2005 Corning Cable Systems. All rights reserved. Published
in the USA. LAN-340-EN / July 2005 / pdf
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement