dps 4 ca meanwell led waterproof 2012

dps 4 ca meanwell led waterproof 2012
Special Symbols for EN61347-2-13
Protection against overgeating to prevent the lamp
controlgear case temperature under any conditions
of use from exceeding the indicated value (110˚C)
110
M
M
tc: 80˚C
ta: 40˚C
F
Based on VDEO710-14. can be installed inside
a wooden material like wooden cabinet. The
minimum distance between the product enclosure
to wooden material in each side is defined.
LPS
Full load operation up to 40˚C with surface
temperature of case <80˚C
SELV
Suiteble for direct mounting on normally flammable surfaces,
such as wood (>2mm)
Limited power source
Vo<120VDC can have mark on the unit
PLN-20
148.5 x 38.5 x 28 mm
PLN-30
145 x 47 x 30 mm
PLN-45/60
181 x 61.5 x 35 mm
PLN-100
200 x 70.5 x 35 mm
Series
Dimension (LxWxH)
HLN-40H/60H
161 x 61.5 x 35 mm
HLN-80H
181 x 61.5 x 35 mm
Series
Dimension (LxWxH)
LPF-16 (D)/25(D)
148 x 40 x 30 mm
LPF-40(D)/60(D)
162.5 x 43 x 32 mm
LPF-90(D)
161 x 61 x 36 mm
Series
Dimension (LxWxH)
PLC-30
160 x 46 x 30 mm
PLC-45/60
181.5 x 62 x 35 mm
PLC-100
Dimension (LxWxH)
PCD-16/25, PLD-16/25
84 x 57 x 29.5 mm
162.5 x 43 x 32 mm
PLP-45/60
161 x 61 x 36 mm
Series
Dimension (LxWxH)
HLP-40H/60H
147 x 53 x 27 mm
HLP-80H
167 x 53 x 29.5 mm
Series
Dimension (LxWxH)
ELN-30
145 x 47 x 30 mm
ELN-60
181 x 61.5 x 35 mm
Series
Dimension (LxWxH)
LPLC-18, LPHC-18
140 x 30 x 22 mm
LPC-20
118 x 35 x 26 mm
LPC-35
148 x 40 x 30 mm
LPC-60
162.5 x 42.5 x 32 mm
Series
Dimension (LxWxH)
APC-12/16
77 x 40 x 29 mm
APC-25/35
84 x 57 x 29.5 mm
Series
Dimension (LxWxH)
LPL-18, LPH-18
140 x 30 x 22 mm
LPV-20
118 x 35 x 26 mm
LPV-35
148 x 40 x 30 mm
LPV-60
162.5 x 42.5 x 32 mm
LPV-100
190 x 52 x 37 mm
Series
Dimension (LxWxH)
APV-12/16
77 x 40 x 29 mm
APV-25/35
84 x 57 x 29.5 mm
PLASTIC CASE
148 x 40 x 30 mm
PLP-30
PLASTIC CASE
Dimension (LxWxH)
PLP-20
PCB TYPE
Series
195.6 x 61.5 x 38.8 mm
□/120□
HLG-150□/185□
HLG-240□
200.5 x 69.5 x 35 mm
Series
171 x 61.5 x 36.8 mm
HLG-80H
220 x 68 x 38.8 mm
228 x 68x 38.8 mm
251 x 68 x 38.8 mm
HLG-320H
256 x 90 x 43.8 mm
Series
Dimension (LxWxH)
CLG-60
195.6 x 61.5 x 38.8 mm
CLG-100
222.2 x 68 x 38.8 mm
CLG-150
229 x 68 x 38.8 mm
Series
Dimension (LxWxH)
CEN-60/75
183 x 62.5 x 40.5 mm
CEN-100
193 x 62.5 x 40.5 mm
Series
Dimension (LxWxH)
HVG(C)-100
234 x 68 x 38.8 mm
Series
Dimension (LxWxH)
HSG(C)-70
127.2 x 90 x 38.8 mm
Series
Dimension (LxWxH)
LDV-185
222.2 x 90 x 38.8 mm
METAL CASE
Dimension (LxWxH)
Dimension (LxWxH)
HLG-40H/60H
HLG-100
PLASTIC CASE
Series
Series
PFC
Constant
Voltage
+
Constant
Current
(C.V.+C.C)
NOTE
NON-PFC
NON-PFC
Constant
Current
(C.V.)
Note:
At the moment of power on, the LED power
supply will work in C.V mode and can provide
a peak output current: after the LED turns on,
the LED power supply will go into C.C mode
(patent pending).
Note 1
□ Single-Stage PFC: No hold-up time and higher Rippie & Noise. Not to use in regions with unstable utility status is highly recommended. (For C.V mode operation, please
refer to the application Q&A on Meanwell LED website.
□ Two-Stage PFC: Longer hold-up time and lower Rippie & Noise. Suitable for LED
lighting and general industrial applications.
□ Non-PFC: PF<0.6 and target at regions where PFC compliance does not required.
Family
Series Name
Type (Note 3)
PFC (Note 1)
Single
Stage
Two
Stage
AC Input
Range (VAC)
Potted
C.C or C.V
IP
HLG-40H/60
A*
/80H/100□
B
/120□/150□
C (240W/320W
only
/185□/240□
Blank
67
/320H
D (option)
67
B
67
H: 90-305
Non-H: 90264
CLG-150
Remark
95%
timer
65
180-480
C.V + C.C
90-305
C.V+C.C
A*
B
Max.
Eff.
3 in 1
C.V + C.C
D (option)
HSG-70
Vo/Io
Adj
65
A*
HVG(C)-100
Dimming
(note 2)
67
3 in 1
67
timer
65
92%
Io
90%
65
67
90-295
C.V + C.C
CLG-100
90-295
C.V+C.C
67
90%
CLG-60
90-295
C.V+C.C
67
89%
CEN 60/75/100
90-295
C.V+C.C
66
91%
180-295
C.C.
67
88.%
90-305
C.V+C.C
64
90-305
C.V+C.C
PLN-100
90-295
C.V+C.C
64
90%
PLN-30/45/60
90-295
C.V+C.C
64
89%
PLN-20
90-277
C.V+C.C
64
PLC-100
90-264
C.V+C.C
90%
Terminal block I/O
PLC-30/45/60
90-264
C.V+C.C
89%
Terminal block I/O
C
Blank
LDV-185
HLN40H/60H/80H
A
LPF-16□/25□/
40□/60□/90□
D
B
Blank
67
PCD-16/25
A: 90-135
B: 180-295
Half
C.C
PLD-16/25
16W:
A-90-135 B-180295 25W: 90-295
Half
C.C
PLP-20/30/45/60
HLP-40H/60H/80H
ELN-30/60
91%
20W: 90-277
30-60W:
90-264
C.V+C.C
90-305
C.V+C.C
67
(16W
option)
91%
3 in 1
3 in 1
90.5%
Io
83.5%
82%
AC phase-cut
86%
Io
89%
PCB type
3 in 1
90.5%
PCB type
1-10Vdc
or PWM
88%
90-264
C.V+C.C
64
LPH/LPL-18
LPV-20/35/60/100
LPH:180-264
LPL:90-132
LPV:90-264
C.V
67
89%
LPHC/LPLC-18
LPC-20/35/60
LPHC:180-264
LPLC:90-132
LPC:90-264
C.C
67
87%
APC-12/16/25/35
90-264
APV-12/16/25/35
90-264
Note 2
Note 3
(16/35W
half)
(16/35W
half)
Multi channel c.c output
C.C
84%
C.V
84%
3-in-1 dimming: 1-10Vdc. PWM signal, or resistance. Timer: Timmer dimming function, please contact Current Automation for details,
or visit www.rectifier.co.za.
are popular models and will have sufficient stock for prompt delivery of high quantity orders.
*
• Decided a suitable wattage level, including safety margin • Verify your design of LED driving circuit: direct drive by PSU (choose a
constant current (C.C) mode LED power supply) or add aditional driving IC to get a more precise constant current level
(choose LDV-185 or LDD).
Setting
Circuit Diagram
Description
Advantage & Disadvantage
Using MEAN WELL’s C.C. mode
LED power supply as constant
current source and feed the LED
arrays directly.
Use constant
current (C.C)
mode power
supply only
Meanwell MEAN WELL product:
APC / LPC / ELN / PLN / PLC / LPF
/HLN / PLD / CLG / CEN / HLG /
HSG/ HVG / PLP / HLP families
Advantage
• Simplest design, no need LED
driver IC
• Lowest price
• Highest efficiency with the best
lumen per watt(lm/w)
Disadvatage
• Unbalanced driving current and
shorter
• LED life time LED chips should
be sorted for similar VF
Using multiple channel LED PSU
with DC/DC constant current LED
driver ICs built-in. Each LED strip
can get balanced driving current.
Use multiple
channel C.C. mode
power supply
MEAN WELL product:
LDV-185 series
Using AC/DC C.V. mode LED
power supply and separate DC/
DC LED drivers.
Use constant
voltage (C.V.)
mode power
supply with DC-DC
LED driver
MEAN WELL product:
LDD series
Advantage
• Built-in driver ICs in the unit
• Moderate price
Disadvantage
• Each channel need to have
the same LED quantity
• Lower system efficiency
comparing to the direct drive
method
Advantage
• Independent output
channels, the most balanced
current for paralleled LED
strips
• No need to sort the VF of LED
• Longer LED lifetime
• Failures in any string do not
affect the other strings
Disadvantage
• Higher price
• Complicated circuit design
• Lowest system efficiency
• Largest in power supply
volume
• Verify whether the application need PFC function • Verify location of assembly and the required level against dust and
humidity for the LED power supply (enclosed style, IP level, dry/damp/wet location).
• Verify the required safety certificates
• Need to adjust the output voltage and/or output current or need dimming function?
JHB: Tel: 010 591-1713, Fax: 011 462-4310,
KZN:
Tel: 031 569-2854,
Fax: 031 569-2864
Bloem: Tel: 079 016- 1417, Fax: 086 657-9836,
Tel: 076 412-3309
CapeTown:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement