Piranha3/HS/HN/ES Material Composition Product Declaration

Piranha3/HS/HN/ES Material Composition Product Declaration
Material Composition Product Declaration
Manufacturer: Teledyne DALSA Inc.
Address: 605 McMurray Rd.
Waterloo, Ontario, N2V 2E9
Canada
Product Name: Piranha3/HS/HN/ES
Part Number(s): ES-xx-08k, HS-xx-08k, HN-xx-08k, P3-xx-08k, P3-xx-12k
Note:
The use of ‘x’ in the part number above refers to any and all variations.
This datasheet only applies to those part numbers having a “-R” suffix at the end of the full
orderable part number.
Table of Contents
1.
Declaration: European Directive 2011/65/EC Restriction of Hazardous Substances ........................... 2
2.
Declaration: European Regulation (EC) No 1907/2006 Registration, Evaluation Authorization and
Restriction of Chemicals ........................................................................................................................ 3
3.
Declaration: Electronic Information Product Disclosure Record .......................................................... 5
4.
Product Packaging ................................................................................................................................. 7
5.
Accessories ............................................................................................................................................ 7
6.
Datasheet Responsibility ....................................................................................................................... 7
7.
Teledyne DALSA Corporate Environmental Information ...................................................................... 7
8.
Revision History ..................................................................................................................................... 8
http://www.teledynedalsa.com/imaging/products/
Document #: 03-097-20072-00
Material Composition Product Declaration
1. Declaration: European Directive 2011/65/EC Restriction of
Hazardous Substances
Product Name: Piranha3/HS/HN/ES
Part Number(s): ES-xx-08k, HS-xx-08k, HN-xx-08k, P3-xx-08k, P3-xx-12k
This product conforms to the following directive articles:
Article 4(1): Product does not contain restricted substances above maximum concentration
values tolerated by weight in homogeneous materials, as follows:






Lead (0,1 %)
Mercury (0,1 %)
Cadmium (0,01 %)
Hexavalent chromium (0,1 %)
Polybrominated biphenyls (PBB) (0,1 %)
Polybrominated diphenyl ethers (PBDE) (0,1 %)
Article 4(6): Applications exempted from restriction:
6(a)
Lead as an alloying element in steel for machining purposes and in galvanized steel
containing up to 0.35% lead by weight.
6(c)
Copper alloy containing up to 4 % lead by weight
7(a)
Lead in high melting temperature type solders (i.e. lead- based alloys containing 85
% by weight or more lead)
7(c)-I
Electrical and electronic components containing lead in a glass or ceramic other
than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or
ceramic matrix compound.
15
Lead in solders to complete a viable electrical connection between semiconductor
die and carrier within integrated circuit flip chip packages.
Article 15(1): The CE mark is affixed to the camera data plate.
Declaration:
The supplier certifies that the information provided in this form is true and correct to the best
of its knowledge and belief and has used appropriate methods to ensure its accuracy. Supplier
acknowledges that Company will rely on this certification in determining the compliance of its
products with European Union laws that implement the RoHS Directive. Supplier proclaims
that it may have relied on information provided by others in completing this form and that
Supplier may not have independently verified such information. If the Company and Supplier
enter into an written agreement with respect to the identified item, the terms and conditions of
that agreement, including any warranty rights and/or remedies provided as part of that
agreement, will be the sole and exclusive source of the supplier’s liability and the Company’s
remedies for issues that arise regarding information the Supplier provides in this form.
http://www.teledynedalsa.com/imaging/products/
Document #: 03-097-20072-00
Material Composition Product Declaration
2. Declaration: European Regulation (EC) No 1907/2006 Registration,
Evaluation Authorization and Restriction of Chemicals
Product Name: Piranha3/HS/HN/ES
Part Number(s): ES-xx-08k, HS-xx-08k, HN-xx-08k, P3-xx-08k, P3-xx-12k
Teledyne DALSA Digital Imaging (TDDI) produces products that would be considered an
Article according to regulation Article 3(3): "an object which during production is given a
special shape, surface or design which determines its function to a greater degree than its
chemical composition".
As a manufacturer established outside of the European Economic Area (EEA) TDDI does not
have direct obligations under the REACH Regulation however we understand that the
businesses that import our products into the EEA may have such obligation.
The following requirements may be of relevance to importers;
1. Article 7(1): Registration – if substances in articles are intended to be released during
normal and reasonable foreseeable conditions of use and are present exceeding one
tonne per year they are required to be registered.
TDDI products do not contain any substances intended to be released during normal and
reasonably foreseeable use conditions.
2. Article 7(2): Notification – when substances of very high concern (SVHC) included on
the candidate list for authorization are imported in amounts in excess of 1 tonne per year
and present in articles in concentrations > 0.1% wt/wt of the article notification of the
European Chemical Agency (ECHA) is required.
TDDI products do not contain SVHCs as identified in the latest ECHA Authorization List
(link provided below) in excess of 0.1% wt/wt of the product.
http://echa.europa.eu/addressing-chemicals-of-concern/authorisation/recommendationfor-inclusion-in-the-authorisation-list/authorisation-list
3. Article 33: Communicate – when SVHCs included on the candidate list are included in
articles in concentrations about 0.1% wt/wt of the article recipients of the articles must
be provided information for the articles safe use.
TDDI products do not contain SVHCs as identified in the latest ECHA Candidate List of
Substances (link provided below) in excess of 0.1% wt/wt of the product.
http://www.teledynedalsa.com/imaging/products/
Document #: 03-097-20072-00
Material Composition Product Declaration
http://echa.europa.eu/chem_data/authorisation_process/candidate_list_table_en.asp
4. Article 56: General Provisions – substances incorporated into articles included in
Annex XIV cannot be placed on the market for use after the sunset date unless it has been
authorized or exempted.
TDDI monitors the composition of materials used within it products and will comply with
the provisions based on the contents of Annex XIV by the applicable sunset dates.
http://echa.europa.eu/addressing-chemicals-of-concern/authorisation/recommendation-forinclusion-in-the-authorisation-list/authorisation-list
5. Article 67: General Provisions – substances in an article for which Annex XVII contains
a restriction shall not be placed on the market for use unless it complies with the
condition of restriction.
TDDI products do not contain restricted substances as identified (link provide below) in
accordance with applicable conditions.
http://echa.europa.eu/documents/10162/13632/articles_en.pdf
http://www.teledynedalsa.com/imaging/products/
Document #: 03-097-20072-00
Material Composition Product Declaration
3. Declaration: Electronic Information Product Disclosure Record
With reference to the People’s Republic of China Electronic Industry Standard SJ/T113642006, Marking for Control of Pollution Caused by Electronic Information Products, the
following product disclosure is made:
Product Name: Piranha3/HS/HN/ES
Part Number(s): ES-xx-08k, HS-xx-08k, HN-xx-08k, P3-xx-08k, P3-xx-12k
Environmental Protection Use Period (EPUP)
This product, as referenced by the part number above, will carry a 20 year EPUP. The EPUP
refers to the number of years from the date of manufacture that toxic or hazardous substances
or elements contained in EIPs will not leak or mutate, under normal operating conditions,
stated herein, so that the use of such EIP will not result in any severe environmental pollution,
any bodily harm or damage of any assets.
The applicable use conditions under which this period is stated are;
Electrical Supply: +12 to +15 volts DC
Operating Temperature: 0 to +50 °C (product surface)
Humidity: non-condensing
Note: Except as expressly stated herein and as required under mandatory provisions of the
SJ/T11364-2006, Teledyne DALSA makes no representation or warranty of any kind,
expressed or implied, with respect to EPUP and expressly disclaims any representations or
warranties, expressed or implied, with respect to the EPUP.
Names and Contents of Toxic or Hazardous Substances or Elements in Product
Toxic or Hazardous Substances and Elements
Hexavalent
Lead
Mercury Cadmium Chromium
(Pb)
(Hg)
(Cd)
((Cr (VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Part Name
PCB
X
O
O
O
O
O
Cable/Connectors
O
O
O
O
O
O
Metal Enclosure
O
O
O
O
O
O
Screws
O
O
O
O
O
O
Rubber
O
O
O
O
O
O
Image Sensor
O
O
O
O
O
O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this
part is below the limit requirement in SJ/T11363-2006
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limits requirements in SJ/T11363-2006.
http://www.teledynedalsa.com/imaging/products/
Document #: 03-097-20072-00
Material Composition Product Declaration
电子信息产品声明记录
根据中华人民共和国电子行业标准SJ/T11364-2006- 《电子信息产品污染控制标识及要求》,
声明如下:
产品型号:ES-xx-08k, HS-xx-08k, HN-xx-08k, P3-xx-08k, P3-xx-12k
环保使用期限(EPUP)
上述引用的产品型号将保证20年的环保使用期限。环保使用期限(EPUP)是指在正常操作条件使用
电子信息产品(EIP),电子信息产品中含的有毒有害物质或元素不致发生外泄或突变,从而对环境造
成污染或对人身、财产造成严重损害的期限。
在环保使用期内,产品适用的条件如下所述:
电源:+12 至+15伏直流电
工作温度:0至50 °C (产品表面)
湿度: 非凝结
注解:除非根据SJ/T11364-2006强制性条款要求,在本文里被明确表述外,对于环保使用
期限的任何明示或暗示的陈述或保证,Teledyne DALSA 概不负责,也不会就此承担任何责任。
产品中有害、有毒物质或元素的名称及组成
有害有毒物质或元素
零件名称
铅
(Pb)
印刷电路板
电缆/连接器
金属外壳
螺丝
橡胶
图像传感器
X
O
O
O
O
O
贡
(Hg)
O
O
O
O
O
O
镉
(Cd)
O
O
O
O
O
O
六价铬
((Cr (VI))
多溴联苯
(PBB)
O
O
O
O
O
O
O
O
O
O
O
O
多溴二苯醚
(PBDE)
O
O
O
O
O
O
O: 表示该有毒或有害物质的含量未超过SJ/T11363-2006限量标准所规定的限值
X: 表示该有毒或有害物质的含量超过 SJ/T11363-2006限量标准所规定的限值
http://www.teledynedalsa.com/imaging/products/
Document #: 03-097-20072-00
Material Composition Product Declaration
4. Product Packaging
The packaging for this product conforms to the following requirements:
European Directive 94/62/EC Packaging and Packaging Waste:
Article 8 (2, 3)
Marking and Identification
Article 11 (1)
Concentration levels of heavy metals present in packaging
China’s “Administration on the Control of Pollution Caused by Electronic Information
Products”:
GB 18455-2001
Packing Recycling Mark
5. Accessories
Compatible accessories, within the following categories, denoted by a ‘-R’ suffix in the
product part number comply to the requirements denoted within;
 Cables
 Lens adapters
 Mechanical adapters
6. Datasheet Responsibility
Contact Information:
Name: Chris Renn
Title: Environmental Compliance Manager
Email: [email protected]
7. Teledyne DALSA Corporate Environmental Information
http://www.teledynedalsa.com/imaging/products/environment/
http://www.teledynedalsa.com/imaging/products/
Document #: 03-097-20072-00
Material Composition Product Declaration
8. Revision History
DATE
Rev
Action
Originator
Change
25 Jun 2013
00
Initial Release
Chris Renn
n/a
http://www.teledynedalsa.com/imaging/products/
Document #: 03-097-20072-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement