Photoelectrics
Photoelectrics
Retro-reflective, Industrial Door Market
Type PMP12.M, Polarized, Relay Output, Mute Input
• Range: 12 m
• Modulated, visible light, polarized
• Make or break switching function (switch selectable)
• Make or break Mute function (switch selectable)
• LED-indication for target detected
• Multi supply voltage:
24 VDC and 24 VAC, 50/60 Hz
• 25 x 65 x 81 mm reinforced PC/ABS- housing, IP 67
• NO and NC output
• High EMC immunity
• CE, UL325 and UL508 approved
Product De­scrip­tion
Ordering Key
The PMP12.. is a powerfull polarized retro reflective sensor. The sensor is
designed to meet the hash
requirements in industrial
environments. With a sensing
distance at 12 m the sensor is
usefull in applications where
dust and weather conditions
will influence on the sensing
distance. The sensor is made
in a strong glass reinforced
PC/ABS housing with two
cable glands for easy connection.
With Mute Input on the
transmitter the sensor fullfill
European and North American regulations for Industrial
doors
Type family
Type
Sensing distance (m)
Output relay
Cable gland type
Mute input
Range
(Sn)
Ordering no.
without timer
12 m
12 m
PMP 12 RGM
PMP 12 RIM
PMP12RGM
Type Selection
Housing
WxHxD
25 x 65 x 81
PG 13.5 cable gland
1/2” NPT cable gland
Specifications
Rated operating dist. (Sn) 12 m
(0 to 5,000 lux) with reflector type ER 4,
ref. target
Blind zone ≤ 0.15 m
SensitivityFixed
Temperature drift ≤ 0.4 %/°C
Differential travel (H)
Hysteresis 3 to 20%
Rated operational volt. (UB) 24 VDC ­­± 20%
AC: 45 to 65 Hz 24 VAC ­­± 20%
Rated operational power
(relay ON) ≤ 1 W (1.2 VA)
Output
Contact ratings (AgCdO) µ (micro gap)
Resistive loads
AC 1 3 A/250 VAC
DC 1 3 A/30 VDC
Small inductive loads AC 15 2 A/250 VAC
DC 13 3 A/30 VDC
Mechanical life (typical) ≥ 40 x 106 operations
Electrical life (typical) ≥ 5 x 105 operations
at 220 VAC - 3 A resistive
load: 360 impulses/h
Specifications are subject to change without notice (06.01.2015)
Dielectric voltage 2,000 VAC (rms)
(cont./supply)
Light source GaAlAs, LED, 660 nm
Light type Visible, modulated
Optical angle ± 1.5°
Light spot size 280 mm at 4 m
Ambient light Max. 5’000 lux
Operating frequency 20 Hz
Response time (object related)
OFF-ON (tON)≤ 20 ms
ON-OFF (tOFF)
≤ 30 ms
Power ON delay (tv)
≤ 300 ms (typ. 100 ms)
Output function Switch selectable, make or
break switching
Mute function Switch selectable
Make on ≥ 4 VDC/VAC
Response time output off < 20 ms
Make off < 2 VDC/VAC
Response time output on < 45 ms
Break on < 2 VDC/VAC
Response time output off < 45 ms
Break off ≥ 4 VDC/VAC
Response time output on < 20 ms
1
PMP12RGM
Specifications (cont.)
Max current 10 mA @ 24 VDC
16 mA @ 24 VAC
Indication
Target detected LED, yellow
Environment
Overvoltage category III (IEC 60664/60664A; 60947-1)
Pollution degree 3 (IEC 60664/60664A; 60947-1)
Degree of protection IP 67 (IEC 60529; 60947-1)
Temperature
Operating -25° to +55°C (-13° to +131°F) Stor­age -30° to +80°C (-22° to +176°F)
Vibration
10 to 150 Hz, 0.5 mm/7.5 g
(IEC 60068-2-6)
Shock
2 x 1 m & 100 x 0.5 m
(IEC 60068-2-32)
Rated insulation voltage
250 VAC (rms)
Housing material
Body
PC/ABS, grey
Front
PMMA, red
Cover
PC, black
Cable gland
PA, black, reinforced
Mounting bracket
Steel, galvanized
Connection
Screw terminal
5 x 2 x 1 mm2
Cable gland
PG 13.5 or 1/2” NPT
for cable 6 to 10 mm
Weight
110 g
UL-Approval
cURus UL325, CSA-C22.2 No.247
cULus UL508
CE-markingYes
EN12453, EN12445, EN12978
Connection Diagram
LED
Mute input selection
Output NO/NC
2
1
ON
L
Power supply: 24 VDC or
24 VAC, 50/60 Hz
Mute input voltage: 24 VDC
or 24 VAC, 50/60 Hz
N
M
30 VDC or 50 VAC, Max. 3 A
Switch settings
Make mute
Break switching/NC
Make mute
Make switching/NO
Break mute
Break switching/NC
Break mute
Make switching/NO
Operation Diagram
tv = Power ON delay
Power supply
Target present
Object present
Mute (transmitter ON)
Output NO
Output NC
2
tv
Mute function
active
tv
Specifications are subject to change without notice (06.01.2015)
PMP12RGM
Dimensions
PMP
PMP with angle bracket
Ø4.3
5
Pg 13.5
or ½” NPT
14.5
29.5
67.5
36
17.5
35.5
81
2.5
25
40
7
61.5
Delivery Contents
Accessories
• Photoelectric switch: PMP12..
• Cable gland
• Installation instruction
• Mounting bracket
•Packaging: Cardboard box
• Reflectors: ER series
• MB02 (longer mounting bracket)
Specifications are subject to change without notice (06.01.2015)
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement