Drop-In Spas

Drop-In Spas
SELF CONTAINED DROP-IN BASIN
Specifications
Drop-in Basin Only
Dimensions: 31.5” L (77 cm) x 24” W (61 cm) x 21” H (53 cm) (Length includes front portion with handle and height includes footrest)
Shipping Dimensions (including skid): 48” L (122 cm) x 40.0” W (102 cm) x 29” H (74 cm)
Shipping Weight: 73 lbs (33 kg)
Net Weight: 43 lbs (20 kg)
Drop-in Basin with Cabinet
Dimensions: 33.5” L (85 cm) x 25” W (64 cm) x 15” H (38 cm) (Length includes front portion with handle, height is cabinet height)
Shipping Dimensions (including skid): 48” L (122 cm) x 40.0” W (102 cm) x 29” H (74 cm)
Shipping Weight: 121 lbs (55 kg)
Net Weight: 86 lbs (39 kg)
Cabinet Only
Dimensions: 24” L (61 cm) x 24” W (61 cm) x 15” H (38 cm)
Net Weight: 43 lbs (20 kg)
Basin Capacity: 3.75 US Gallons (14.2 liters)
Power Requirements: 120V AC, 15 Amp, 60HZ. A separate and dedicated 15 Amp GFCI protected circuit MUST be used for each
Drop-in Basin.
Construction: Welded steel frame with veneered front wood panel. Note: Any cabinet enclosure must provide access to internal components
Basin: Highly chemical resistant ABS Plastic, pre-plumbed.
Jet System: One (1) Dual Stream No Pipe™ Jet. Removable screen, no recirculating pipes. ON/OFF controlled by air-activated switch.
IMPORTANT: The Drop-in Basin MUST be installed by a licensed electrician and
a licensed plumber in accordance with all national, state and local codes/regulations.
PLUMBING
Incoming: Hot/Cold supply lines required (1/2” ID).
Sprayer/Filler: Inline back-flow prevention is provided.
Discharge: Gravity drain or optional factory installed drain pump. If factory installed drain pump is utilized,
built-in back flow prevention is provided.
NOTE:
If through floor installation is desired, refer to Plumbing Rough-in drawing (available at ContinuumFootspas.com).
See Owners Manual for complete installation instructions.
ON/OFF controlled by air activated switch. Drain Pump (optional, factory installed) ON/OFF controlled by air
activated switch.
Certification: Underwriters Laboratories Listed
Compliance Listings to the following Standards:
UL 1951, CAN/CSA C22.2 No. 68-92,
ANSI/ASME A112.18.3M, A112.19.7M, A112.18.1, CSA B125.1.2005
Compliant with IAPMO Plumbing Standards. Fixtures and hoses are UPC compliant.
Limited Warranty: One (1) year parts from date of shipment. See Limited Warranty in Owner’s Manual for complete details
ACCESSORIES:
Deluxe Tech Chair: Base: 24” diameter (61 cm) Height range (excluding cushion): 13” to 16” (33 cm to 41 cm)
Net weight: 15 lbs (7 kg)
Shipping Dimensions: 26” W (66 cm) x 26” L (66 cm) x 12” H (31 cm) Shipping Weight: 23 lbs (11 kg)
Standard Tech Chair: Base: 21” diameter (53 cm) Height range (including cushion): 14” to 16.5” (36 cm to 42 cm)
Net weight: 14 lbs (6 kg)
Shipping Dimensions: 21” W (53 cm) x 21” L (53 cm) x 11” H (28 cm) Shipping Weight: 18 lbs (8 kg)
Accessory Cart: 24” L (61 cm) x 19” W (48 cm) x 20” H (51 cm) Net Weight: 32 lbs (15 kg)
Shipping Dimensions: 26” W (66 cm) x 26” L (66 cm) x 12” H (31 cm) Shipping Weight: 35 lbs (16 kg)
Note: Due to continuous improvements, all specifications are subject to change without notice. All dimensions and weights are approximate.
© 2012, Continuum Footspas, LLC
April, 2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement