CONTROL CENTER MODEL CC-101 PROJECT: ITEM NO.:

CONTROL CENTER MODEL CC-101 PROJECT: ITEM NO.:
PROJECT:ITEM NO.:
CONTROL CENTER MODEL CC-101
WATER/ENERGY SAVING FEATURE • AUTOMATIC REVERSING ACTION
SPECIFICATIONS
STAINLESS STEEL ENCLOSURE
• NEMA 4
• Stainless steel construction
• Easy to clean and keep clean
AUTOMATIC REVERSING CONTROL
• Reverses direction of motor at each startup
• Increases cutting element life and reduces jams
REVERSING DELAY
• Disposer will not reverse while motor is in motion
• Protects motor from burn out from operator misuse
AUTOMATIC DROP OUT SYSTEM
• If a power loss occurs, control will automatically
disengage power lines
• Disposer must be restarted
DISCONNECT SWITCH
• Disconnects electrical power beyond switch for service
• Interlock with front cover
SOLID STATE CONTROL
• Operates on 24V
SOLID STATE CONTROL CIRCUIT
•Printed circuit board with control diagnostic/function lights,
delay timers and timed run pin and reversing control
POST WATER FLUSH
• Adjustable timer allows water to run automatically for up
to 10 minutes, flushing disposer and drain lines after
disposer is shut off
TIMED RUN OR CONTINUOUS RUN
• Selected at your discretion, simply by moving the plug-in
in on the printed circuit board
•Timed run shuts off disposer automatically after 10 minutes
• Can be shut off manually any time
SOLENOID VALVE
• Packed unattached inside control center carton
• Ensures that water is flowing into disposer while disposer
is operating
ON-SITE
PARTS & L ABOR
YEAR
WARR ANT Y
DIMENSIONS
9-7/8"
(250.8 mm)
8-1/4"
(209.6 mm)
1"
(25.4 mm)
15-3/4"
(400.1 mm)
15-1/8"
(384.2 mm)
14"
(355.6 mm)
VOLTAGE/PHASE AVAILABILITY
Model
Voltage/Hz
Phase
Disposer Models
CC101K-5
120V, 50/60 Hz
1 Ph
SS-100 to SS-200
CC101K-6
208-240V, 50/60 Hz
1 Ph
SS-100 to SS-200
CC101K-7
208-240V, 50/60 Hz
3 Ph
SS-100 to SS-1000
CC101K-8
380-460V, 50/60 Hz
3 Ph
SS-100 to SS-1000
5-5/16"
(134.9 mm)
6-3/4"
(171.5 mm)
A complete collection of our product drawings is available for download at the InSinkErator Revit/CAD
Library, which can be found at www.insinkerator.com/foodservice. Product information is also accessible
on The KCL CADalog. More information is available from KCL at www.kclcad.com.
4700 21st STREET
RACINE, WI 53406
TEL: 800-845-8345
FAX: 262 554-3620
www.insinkerator.com/foodservice
InSinkErator is a business unit of Emerson Electric Co.
The Emerson logo is a
trademark and a service mark
of Emerson Electric Co.
InSinkErator ©2016 Printed in USA
Form No. F455-16A-83-85
RECOMMENDED INSTALLATION
NOTE: The CC-101 control center should be mounted 1-1/2" (38.1 mm) back from the front surface of the table.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement