8.6 Schlüter ® -KERDI-SHOWER Product data sheet (pdf

8.6 Schlüter ® -KERDI-SHOWER Product data sheet (pdf
Schlüter®-KERDI-SHOWER-SK
is a waterproofing set for floor level showers. Schlüter ® -KERDI-SHOWER-SK
includes Schlüter®-KERDI (1) for waterproofing the wall areas of showers as well
as the corresponding prefabricated parts
for internal corners (2) and collars for pipe
sleeves (3). The scope of supply also
includes Schlüter®-KERDI-KEBA sealing
band (4) for covering joints and internal
floor to wall connections, corners and
the sealing adhesive Schlüter®-KERDICOLL (6).
Schlüter®-KERDI-SHOWER-SK is suitable for combination with the floor components Schlüter®-KERDI-SHOWER-T,
-TB, and -TC as well as -L and -LC or for
conventional floor level showers installed
with screed.
Schlüter®-KERDI-SHOWER-SKB
also includes a Schlüter®-KERDI-DRAINBASE floor drain.
Schlüter®-KERDI-SHOWER-SKB is suitable for conventional floor level showers and for combination with the floor
elements Schlüter®-KERDI-SHOWER-T,
-TB, and -TC.
8. 6 Schlüter ® -KERDI - S HO WER
b
B
a
A
Schlüter -KERDI-KERECK/FI
(2 pieces)
Schlüter -KERDI-200
(1 m x 5 m*) / (1 m x 10 m**)
®
®
c
C
Text template for tenders:
Text template for tenders:
Text template for tenders:
_______units Schlüter ®-KERDI-SHOWER-T
as a floor level shower tray of rigid extruded
polystyrene foam, suitable for the installation
of tiles and able to withstand the weight of
wheelchairs, featuring a trapezoid shaped
adhesive structure and pre-fabricated slope
> 2% (except long side sloped trays 90 x 180
cm) in the dimension
  90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
  90 x 180 cm
with the matching Schlüter®-KERDI waterproofing collar made of crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding
with the tile adhesive, to be supplied and professionally installed while observing the manufacturer instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
_______units of Schlüter®-KERDI-SHOWER-TB
as a shower tray element for floor level tiling,
suitable to bear the weight of wheelchairs,
made of expanded rigid polystyrene foam with
an existing gradient of > 2% and a pre-adhered
Schlüter ®-KERDI waterproofing membrane
consisting of a crack bridging polyethylene
waterproofing membrane with anchoring fleece
laminated on both sides for bonding with the
tile adhesive, to be supplied in the size
100 x 100 cm
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
_______units of Schlüter®-KERDI-SHOWERSKB bonded waterproofing set including
floor drain, consisting of Schlüter®-KERDI as
a crack bridging polyethylene waterproofing
membrane with anchoring fleece laminated
on both sides for bonding with the tile adhesive, Schlüter®-KERDI-BAND as a sealing band
made of polyethylene foil with anchoring fleece
laminated on both sides for covering abutting seams and floor-wall transitions, 2 pieces
Schlüter®-KERDI-KERECK as pre-fabricated
interior corner pieces made of polyethylene foil
with anchoring fleece laminated on both sides
for sealing corner areas, 2 pieces Schlüter®KERDI-KM as a polyethylene pipe collar with
a 22 mm opening and anchoring fleece laminated on both sides, 1 piece Schlüter®-KERDICOLL as a two component sealing adhesive
based on a solvent free acrylate dispersion
and a cement reactive powder for adhering
and sealing the overlaps of Schlüter®-KERDI
membranes and 1 piece Schlüter®-KERDIDRAIN-BASE as a floor drain with odour trap,
horizontal coupling DN 40/DN 50 (40/50 mm)
and a bonding flange insert with stainless steel
grate 10 x 10 cm (Design 1) to construct
floor level showers with dimensions up to
1.0 m x 1.0 m
floor level showers with dimensions up to
2.0 m x 2.0 m
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
d
D
Schlüter®-KERDI-KEBA
(12.5 cm x 10 m)
Schlüter®-KERDI-KM
(2 pieces)
Note:
***Only the waterproofing set Schlüter®KERDI-SHOWER-SKB includes
Schlüter®-KERDI-DRAIN-BASE.
***
Item no. KSS 5 and KSS5 KD 10 EH
40* = Waterproofing set for up to 1000
x 1000 mm
Item no. KSS 10 and KSS 10 KD 10 EH 40**
= Waterproofing set for up to 2000 x
2000 mm or 900 x 1800 mm
f
F
e
E
Schlüter -KERDI-DRAIN-BASE
(1 piece)
incl. grate and frame set
®
Schlüter®-KERDI-COLL
(1.85 kg*) / (4.25 kg**)
Text template for tenders:
______units Schlüter®-KERDI-SHOWER-TC
as a 2 piece floor level shower tray of rigid
expanded polystyrene foam, suitable for the
installation of tiles and able to withstand the
weight of wheelchairs, featuring a trapezoid
shaped adhesive structure and pre-fabricated
slope > 2% (except long-side sloped trays 90
x 180 cm) with the matching 2 piece levelling
board for insertion of the drain body and the
drain pipe, in the dimension
  90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
  90 x 180 cm
with the matching Schlüter®-KERDI waterproofing collar made of crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding
with the tile adhesive, to be supplied and professionally installed while observing the manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
Text template for tenders:
_______ units of Schlüter®-KERDI-SHOWER-SK
bonded waterproofing set, consisting of
Schlüter®-KERDI as a crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding with
the tile adhesive, Schlüter®-KERDI-KEBA as
a sealing band made of polyethylene foil with
anchoring fleece laminated on both sides for
covering abutting joints and floor to wall transitions, 2 pieces Schlüter®-KERDI-KERECK as
pre-fabricated interior corner pieces made of
polyethylene foil with anchoring fleece laminated on both sides for sealing corner areas,
2 pieces Schlüter®-KERDI-KM as a polyethylene pipe collar with a 22 mm opening and
anchoring fleece laminated on both sides, 1
piece Schlüter®-KERDI-COLL as a two component sealing adhesive based on a solventfree acrylate dispersion and a cement reactive
powder for adhering and sealing the overlaps
of Schlüter®-KERDI membranes to construct
floor level showers with dimensions up to
1.0 m x 1.0 m
floor level showers with dimensions up to
2.0 m x 2.0 m
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
Schlüter-Systems KG · Schmölestraße 7 · D-58640 Iserlohn · Tel.: +49 2371 971-261 · Fax: +49 2371 971-112
[email protected] · www.schlueter-systems.com
Schlüter-Systems Ltd · Units 4–5 Bardon 22 · Beveridge Lane · Coalville · Leicestershire · LE67 1TE
Tel.: +44 1530 813396 · Fax: +44 1530 813376 · [email protected] · [email protected] · www.schluter.co.uk
Schlüter®-KERDI-SHOWER
8.6
Drainage
floor level showers
Product data sheet
Application and Function
Art.-Nr. 552 860 – 10/12 Issue – Reprints will invalidate this issue.
8.6 Sc h l üte r ® - KE RD I -S HOWE R
Schlüter®-KERDI-SHOWER is a modular
system for the construction of floor level
showers with ceramic tiles.
The sloped trays, which have optional
levelling boards, are available in different
dimensions.
The matching floor drain system
Schlüter®-KERDI-DRAIN-BASE is available as a set. Depending on the conditions
of the construction site, other variants of
Schlüter®-KERDI-DRAIN may be used
as well. Various sets of Schlüter®-KERDI
are available for waterproofing the wall
areas.
The surface of the sloped trays already has
the necessary gradient of > 2 % (except for
long sides of sloped trays with the dimension 180 x 90 cm)
The drain body and the drainage pipe are
inserted into the levelling board, which represents the lowest possible construction
height and can be adjusted, for example
with a mortar layer.
The available base dimensions are:
90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
90 x 180 cm
Smaller dimensions can easily be cut to
size with a utility knife. The material features prepared cutting grooves for circular
cuts.
The matching floor drain for the system,
Schlüter®-KERDI-DRAIN-BASE (for horizontal drainage), has a drain capacity of
0.4 l/s.
Matching variants of Schlüter ®-KERDIDRAIN are available for special cases with
higher drain capacity needs, vertical drains,
or other requirements.
Schlüter ®-KERDI-SHOWER stands out
for its particularly easy and reliable installation. Together with Schlüter ®-KERDI
waterproofing component, this meets the
requirements of the German Certificate of
National Technical Approval (abP) for Category A waterproofing assemblies. The
system components of Schlüter®-KERDISHOWER are packaged as a set and can
easily be combined as required.
Horizontal drainage
Vertical drainage
Re 1. and 2.
Set levelling board in
place, if required.
Re 3.
Insert drain body
Re 4.
Place sloped tray on top
Re 7.
Install waterproofing
assembly
Re 5.
Install bonding flange
Re 9.
Insert the stainless steel
grate and frame at the
appropriate height as part
of the installation
g
b
a
h
c
d
e
f
a Schlüter®-KERDI waterproofing collar
b Schlüter®-KERDI-SHOWER sloped tray
c Schlüter®-KERDI-SHOWER levelling board
d Schlüter®-KERDI-DRAIN-BASE floor drain set
e Drainage pipe
f Substrate
g Tiles
h Grate and frame set with drain body with
integrated odour trap
Material
Installation
The levelling board and the sloped board
consist of pressure resistant, expanded
polystyrene foam (EPS). The drain body is
made of high impact polypropylene (PP).
The bonding flange consists of acryl-nitrile
butadiene styrene (ABS) and features an
attachment flange with a fleece coated
surface. The Schlüter ®-KERDI collar for
bonded waterproofing of the sloped board
is a polyethylene waterproofing membrane
with fleece fabric laminated on both sides
for anchoring in the tile adhesive.
The stainless steel grate included in the
waterproofing set Schlüter ® -KERDISHOWER-SKB is made of V2A (material
no. 1.4301 = AISI 304).
1. The levelling board is installed in dry
setting thin bed adhesive on a level
substrate. To offset uneven sections
or for height adjustment, the levelling
board can also be installed and aligned
over several sufficiently spaced dabs of
adhesive or a layer of levelling screed.
Note:
If the building project is subject to
sound insulation requirements, install
the levelling board over a sound insulation panel and attach an edge insulation strip along the perimeter.
Observe the maximum compressibility
CP4 (< 4mm) when selecting a suitable
insulation material.
2. Cut out the necessary openings in
the levelling board for the pipes in the
appropriate places.
3. Insert the drain body into the corresponding opening of the levelling
board and connect it to the wastewater system with a drain pipe, using the
supplied adapter piece (DN 40 to BS
40 mm). Perform a leakage test.
4. Now adhere the sloped board to the
prepared levelling board with a dry setting thin bed adhesive.
Avoid placing the abutting joint of the
sloped tray directly over the drain pipe.
5. Fit the bonding flange into the drain
body through the opening so that the
flange is flush with the surface of the
sloped board. Apply thin bed adhesive
under the flange for complete attachment and bedding.
6. To integrate the Schlüter ® -KERDI
collar into the bonded waterproofing
assembly, apply the sealing Schlüter®KERDI-COLL to the adhesive flange
of the bonding flange insert and use a
notched trowel to spread dry setting tile
adhesive on the remaining area of the
sloped tray to completely embed the
Schlüter®-KERDI collar.
Press the Schlüter ® -KERDI collar
in place with the smooth side of the
notched trowel or a smoothing trowel
by applying oblique pressure. Be careful to avoid the formation of bubbles
and observe the curing times of all
materials.
7. To waterproof the wall areas, install the
waterproofing membrane Schlüter®KERDI. Where the joints of the membranes abut, in the corner areas, and
along the floor to wall transition should
Material properties and areas of
application
The drain body, bonding flange and grates
are categorised as load class K3 in accordance with DIN EN 1253 (BS EN 1253) Gullies for Buildings. This class refers to surfaces without traffic loads, e.g. wet rooms
in apartments, nursing homes, hotels,
schools, public bathroom and shower facilities. In certain cases, the suitability of the
selected floor drainage system must be
verified based on the anticipated chemical,
mechanical and/or other stresses.
8. 6 Schlüter ® -KERDI-SHO WER
8 . 6 S c h l ü t e r ® - KERDI - S HO WER
Product Overview
be sealed with Schlüter®-KERDI-KEBA
and Schlüter ®-KERDI-COLL. Waterproof all pipe sleeves with the pipe
collar Schlüter®-KERDI-KM. The corresponding product data sheets 8.1
Schlüter®-KERDI and 8.4 Schlüter®KERDI-COLL must be observed.
Note:
If the wall areas are made of Schlüter®KERDI-BOARD, the material can also
be used for waterproofing the walls
(see product data sheet 12.1 Schlüter®KERDI-BOARD). Abutting joints and
corners also have to be sealed with
Schlüter®-KERDI-KEBA sealing band,
using the adhesive Schlüter®-KERDICOLL.
8. As soon as the bonded waterproofing assembly has been completed as
described above, you can begin to
install the tiles in the thin bed method.
No waiting is required.
9. For the installation of tile, apply drysetting thin bed mortar directly over
Schlüter®-KERDI and fully embed the
tiles in the adhesive. Regardless of the
tile format, the floor area can withstand
normal foot traffic and is able to bear
the weight of wheelchairs. If higher
traffic loads are expected, an additional load distribution layer or larger
tile formats may be required.
Note: Use system approved thin bed mortars for areas that require waterproofing
in accordance with general certificate
of national technical approval or CE
conformity. Please contact us at the
address shown in this data sheet for
more details. As part of the installation
of the floor tiles, press the drain grate
frame into the thin bed adhesive until
flush with the tile covering. Tile adhesive can be applied below the grate
frame for additional support, if required.
10.Other coverings, such as coatings,
synthetic coverings etc. may be used
in principle, but are not explained in
greater detail here. Their use must be
clarified in advance. We will be pleased
to provide you with further recommendations upon request.
Assembly heights of
Schlüter®-KERDI-SHOWER boards
Sloped tray (b)
Height (max.)
31 mm
Levelling board (c)
Height
60 mm
33 mm
60 mm
1000 x 1000 mm
22 mm (TB)
1200 x 1200 mm
35 mm
60 mm
1500 x 1500 mm
39 mm
60 mm
900 x 1800 mm
40 mm
60 mm
Dimensions
  900 x   900 mm
1000 x 1000 mm
Schlüter®-KERDI-SHOWER-T
is a set consisting of the sloped tray (b)
and the Schlüter®-KERDI collar (a).
Schlüter®-KERDI-SHOWER-TB
is a sloped tray with a pre-adhered
Schlüter ®-KERDI waterproofing membrane.
Schlüter®-KERDI-SHOWER-TC
is a set consisting of the sloped tray (b),
the levelling board (c) and the Schlüter®KERDI collar (a).
a
Schlüter®-KERDI waterproofing collar
b
Schlüter®-KERDI-SHOWER sloped board
-
Note: The drain body and the drainage pipe
of the Schlüter®-KERDI-DRAIN-BASE floor
drain are inserted into the levelling board (c).
The board has a custom fit opening for the
drain body. The board also features a pipe
cut out that runs at a right angle to the wall
and diagonally to the wall corner.
Use a utility knife to make the necessary
cut outs along the embossed groove. The
board, which is divided into two parts for
easier handling, also has a tongue and
groove connection.
The sloped tray (b) already has the necessary gradient of > 2 % (except for long sides
of sloped trays in the dimension 90 x 180
cm). It features a custom fit opening for the
Schlüter®-KERDI-DRAIN bonding flange.
The board, which is divided into two parts
for easier handling, also has a tongue and
groove connection mechanism. Cutting
grooves are marked on the back for the
construction of circular showers.
The sloped tray (b) is installed in combination with the levelling board or can be used
separately, depending on the individual construction site situation (e.g. wood structure,
vertical drain, mortar substructure etc.).
The Schlüter®-KERDI collar (a) is available
in matching sizes for the sloped tray (or is
pre-adhered in the case of the sloped tray
Schlüter®-KERDI-SHOWER-TB) and features
a matching round cut-out (Ø 175 mm) for the
bonding flange insert.
Schlüter®-KERDI-SHOWER-T
Schlüter®-KERDI-SHOWER-TC
Schlüter®-KERDI-SHOWER-TB sloped board
Example Schlüter®-KERDI-SHOWER-TB
300
900 mm
8.6 Sch lü ter ® -K E R D I -SHO WER
c
Schlüter®-KERDI-SHOWER levelling board
Example:
Assembly with horizontal drain
1800 mm
Schlüter®-KERDI-SHOWER sloped board
KSTO 900 1800
Re 1. and 2.
Set levelling board in
place, if required.
Re 3.
Insert drain body
Re 4.
Place sloped tray on top
Re 7.
Install waterproofing
assembly
Re 5.
Install bonding flange
Re 9.
Insert the stainless steel
grate and frame at the
appropriate height as part
of the installation
g
b
a
h
c
d
e
f
a Schlüter®-KERDI waterproofing collar
b Schlüter®-KERDI-SHOWER sloped tray
c Schlüter®-KERDI-SHOWER levelling board
d Schlüter®-KERDI-DRAIN-BASE floor drain set
e Drainage pipe
f Substrate
g Tiles
h Grate and frame set with drain body with
integrated odour trap
Material
Installation
The levelling board and the sloped board
consist of pressure resistant, expanded
polystyrene foam (EPS). The drain body is
made of high impact polypropylene (PP).
The bonding flange consists of acryl-nitrile
butadiene styrene (ABS) and features an
attachment flange with a fleece coated
surface. The Schlüter ®-KERDI collar for
bonded waterproofing of the sloped board
is a polyethylene waterproofing membrane
with fleece fabric laminated on both sides
for anchoring in the tile adhesive.
The stainless steel grate included in the
waterproofing set Schlüter ® -KERDISHOWER-SKB is made of V2A (material
no. 1.4301 = AISI 304).
1. The levelling board is installed in dry
setting thin bed adhesive on a level
substrate. To offset uneven sections
or for height adjustment, the levelling
board can also be installed and aligned
over several sufficiently spaced dabs of
adhesive or a layer of levelling screed.
Note:
If the building project is subject to
sound insulation requirements, install
the levelling board over a sound insulation panel and attach an edge insulation strip along the perimeter.
Observe the maximum compressibility
CP4 (< 4mm) when selecting a suitable
insulation material.
2. Cut out the necessary openings in
the levelling board for the pipes in the
appropriate places.
3. Insert the drain body into the corresponding opening of the levelling
board and connect it to the wastewater system with a drain pipe, using the
supplied adapter piece (DN 40 to BS
40 mm). Perform a leakage test.
4. Now adhere the sloped board to the
prepared levelling board with a dry setting thin bed adhesive.
Avoid placing the abutting joint of the
sloped tray directly over the drain pipe.
5. Fit the bonding flange into the drain
body through the opening so that the
flange is flush with the surface of the
sloped board. Apply thin bed adhesive
under the flange for complete attachment and bedding.
6. To integrate the Schlüter ® -KERDI
collar into the bonded waterproofing
assembly, apply the sealing Schlüter®KERDI-COLL to the adhesive flange
of the bonding flange insert and use a
notched trowel to spread dry setting tile
adhesive on the remaining area of the
sloped tray to completely embed the
Schlüter®-KERDI collar.
Press the Schlüter ® -KERDI collar
in place with the smooth side of the
notched trowel or a smoothing trowel
by applying oblique pressure. Be careful to avoid the formation of bubbles
and observe the curing times of all
materials.
7. To waterproof the wall areas, install the
waterproofing membrane Schlüter®KERDI. Where the joints of the membranes abut, in the corner areas, and
along the floor to wall transition should
Material properties and areas of
application
The drain body, bonding flange and grates
are categorised as load class K3 in accordance with DIN EN 1253 (BS EN 1253) Gullies for Buildings. This class refers to surfaces without traffic loads, e.g. wet rooms
in apartments, nursing homes, hotels,
schools, public bathroom and shower facilities. In certain cases, the suitability of the
selected floor drainage system must be
verified based on the anticipated chemical,
mechanical and/or other stresses.
8. 6 Schlüter ® -KERDI-SHO WER
8 . 6 S c h l ü t e r ® - KERDI - S HO WER
Product Overview
be sealed with Schlüter®-KERDI-KEBA
and Schlüter ®-KERDI-COLL. Waterproof all pipe sleeves with the pipe
collar Schlüter®-KERDI-KM. The corresponding product data sheets 8.1
Schlüter®-KERDI and 8.4 Schlüter®KERDI-COLL must be observed.
Note:
If the wall areas are made of Schlüter®KERDI-BOARD, the material can also
be used for waterproofing the walls
(see product data sheet 12.1 Schlüter®KERDI-BOARD). Abutting joints and
corners also have to be sealed with
Schlüter®-KERDI-KEBA sealing band,
using the adhesive Schlüter®-KERDICOLL.
8. As soon as the bonded waterproofing assembly has been completed as
described above, you can begin to
install the tiles in the thin bed method.
No waiting is required.
9. For the installation of tile, apply drysetting thin bed mortar directly over
Schlüter®-KERDI and fully embed the
tiles in the adhesive. Regardless of the
tile format, the floor area can withstand
normal foot traffic and is able to bear
the weight of wheelchairs. If higher
traffic loads are expected, an additional load distribution layer or larger
tile formats may be required.
Note: Use system approved thin bed mortars for areas that require waterproofing
in accordance with general certificate
of national technical approval or CE
conformity. Please contact us at the
address shown in this data sheet for
more details. As part of the installation
of the floor tiles, press the drain grate
frame into the thin bed adhesive until
flush with the tile covering. Tile adhesive can be applied below the grate
frame for additional support, if required.
10.Other coverings, such as coatings,
synthetic coverings etc. may be used
in principle, but are not explained in
greater detail here. Their use must be
clarified in advance. We will be pleased
to provide you with further recommendations upon request.
Assembly heights of
Schlüter®-KERDI-SHOWER boards
Sloped tray (b)
Height (max.)
31 mm
Levelling board (c)
Height
60 mm
33 mm
60 mm
1000 x 1000 mm
22 mm (TB)
1200 x 1200 mm
35 mm
60 mm
1500 x 1500 mm
39 mm
60 mm
900 x 1800 mm
40 mm
60 mm
Dimensions
  900 x   900 mm
1000 x 1000 mm
Schlüter®-KERDI-SHOWER-T
is a set consisting of the sloped tray (b)
and the Schlüter®-KERDI collar (a).
Schlüter®-KERDI-SHOWER-TB
is a sloped tray with a pre-adhered
Schlüter ®-KERDI waterproofing membrane.
Schlüter®-KERDI-SHOWER-TC
is a set consisting of the sloped tray (b),
the levelling board (c) and the Schlüter®KERDI collar (a).
a
Schlüter®-KERDI waterproofing collar
b
Schlüter®-KERDI-SHOWER sloped board
-
Note: The drain body and the drainage pipe
of the Schlüter®-KERDI-DRAIN-BASE floor
drain are inserted into the levelling board (c).
The board has a custom fit opening for the
drain body. The board also features a pipe
cut out that runs at a right angle to the wall
and diagonally to the wall corner.
Use a utility knife to make the necessary
cut outs along the embossed groove. The
board, which is divided into two parts for
easier handling, also has a tongue and
groove connection.
The sloped tray (b) already has the necessary gradient of > 2 % (except for long sides
of sloped trays in the dimension 90 x 180
cm). It features a custom fit opening for the
Schlüter®-KERDI-DRAIN bonding flange.
The board, which is divided into two parts
for easier handling, also has a tongue and
groove connection mechanism. Cutting
grooves are marked on the back for the
construction of circular showers.
The sloped tray (b) is installed in combination with the levelling board or can be used
separately, depending on the individual construction site situation (e.g. wood structure,
vertical drain, mortar substructure etc.).
The Schlüter®-KERDI collar (a) is available
in matching sizes for the sloped tray (or is
pre-adhered in the case of the sloped tray
Schlüter®-KERDI-SHOWER-TB) and features
a matching round cut-out (Ø 175 mm) for the
bonding flange insert.
Schlüter®-KERDI-SHOWER-T
Schlüter®-KERDI-SHOWER-TC
Schlüter®-KERDI-SHOWER-TB sloped board
Example Schlüter®-KERDI-SHOWER-TB
300
900 mm
8.6 Sch lü ter ® -K E R D I -SHO WER
c
Schlüter®-KERDI-SHOWER levelling board
Example:
Assembly with horizontal drain
1800 mm
Schlüter®-KERDI-SHOWER sloped board
KSTO 900 1800
Re 1. and 2.
Set levelling board in
place, if required.
Re 3.
Insert drain body
Re 4.
Place sloped tray on top
Re 7.
Install waterproofing
assembly
Re 5.
Install bonding flange
Re 9.
Insert the stainless steel
grate and frame at the
appropriate height as part
of the installation
g
b
a
h
c
d
e
f
a Schlüter®-KERDI waterproofing collar
b Schlüter®-KERDI-SHOWER sloped tray
c Schlüter®-KERDI-SHOWER levelling board
d Schlüter®-KERDI-DRAIN-BASE floor drain set
e Drainage pipe
f Substrate
g Tiles
h Grate and frame set with drain body with
integrated odour trap
Material
Installation
The levelling board and the sloped board
consist of pressure resistant, expanded
polystyrene foam (EPS). The drain body is
made of high impact polypropylene (PP).
The bonding flange consists of acryl-nitrile
butadiene styrene (ABS) and features an
attachment flange with a fleece coated
surface. The Schlüter ®-KERDI collar for
bonded waterproofing of the sloped board
is a polyethylene waterproofing membrane
with fleece fabric laminated on both sides
for anchoring in the tile adhesive.
The stainless steel grate included in the
waterproofing set Schlüter ® -KERDISHOWER-SKB is made of V2A (material
no. 1.4301 = AISI 304).
1. The levelling board is installed in dry
setting thin bed adhesive on a level
substrate. To offset uneven sections
or for height adjustment, the levelling
board can also be installed and aligned
over several sufficiently spaced dabs of
adhesive or a layer of levelling screed.
Note:
If the building project is subject to
sound insulation requirements, install
the levelling board over a sound insulation panel and attach an edge insulation strip along the perimeter.
Observe the maximum compressibility
CP4 (< 4mm) when selecting a suitable
insulation material.
2. Cut out the necessary openings in
the levelling board for the pipes in the
appropriate places.
3. Insert the drain body into the corresponding opening of the levelling
board and connect it to the wastewater system with a drain pipe, using the
supplied adapter piece (DN 40 to BS
40 mm). Perform a leakage test.
4. Now adhere the sloped board to the
prepared levelling board with a dry setting thin bed adhesive.
Avoid placing the abutting joint of the
sloped tray directly over the drain pipe.
5. Fit the bonding flange into the drain
body through the opening so that the
flange is flush with the surface of the
sloped board. Apply thin bed adhesive
under the flange for complete attachment and bedding.
6. To integrate the Schlüter ® -KERDI
collar into the bonded waterproofing
assembly, apply the sealing Schlüter®KERDI-COLL to the adhesive flange
of the bonding flange insert and use a
notched trowel to spread dry setting tile
adhesive on the remaining area of the
sloped tray to completely embed the
Schlüter®-KERDI collar.
Press the Schlüter ® -KERDI collar
in place with the smooth side of the
notched trowel or a smoothing trowel
by applying oblique pressure. Be careful to avoid the formation of bubbles
and observe the curing times of all
materials.
7. To waterproof the wall areas, install the
waterproofing membrane Schlüter®KERDI. Where the joints of the membranes abut, in the corner areas, and
along the floor to wall transition should
Material properties and areas of
application
The drain body, bonding flange and grates
are categorised as load class K3 in accordance with DIN EN 1253 (BS EN 1253) Gullies for Buildings. This class refers to surfaces without traffic loads, e.g. wet rooms
in apartments, nursing homes, hotels,
schools, public bathroom and shower facilities. In certain cases, the suitability of the
selected floor drainage system must be
verified based on the anticipated chemical,
mechanical and/or other stresses.
8. 6 Schlüter ® -KERDI-SHO WER
8 . 6 S c h l ü t e r ® - KERDI - S HO WER
Product Overview
be sealed with Schlüter®-KERDI-KEBA
and Schlüter ®-KERDI-COLL. Waterproof all pipe sleeves with the pipe
collar Schlüter®-KERDI-KM. The corresponding product data sheets 8.1
Schlüter®-KERDI and 8.4 Schlüter®KERDI-COLL must be observed.
Note:
If the wall areas are made of Schlüter®KERDI-BOARD, the material can also
be used for waterproofing the walls
(see product data sheet 12.1 Schlüter®KERDI-BOARD). Abutting joints and
corners also have to be sealed with
Schlüter®-KERDI-KEBA sealing band,
using the adhesive Schlüter®-KERDICOLL.
8. As soon as the bonded waterproofing assembly has been completed as
described above, you can begin to
install the tiles in the thin bed method.
No waiting is required.
9. For the installation of tile, apply drysetting thin bed mortar directly over
Schlüter®-KERDI and fully embed the
tiles in the adhesive. Regardless of the
tile format, the floor area can withstand
normal foot traffic and is able to bear
the weight of wheelchairs. If higher
traffic loads are expected, an additional load distribution layer or larger
tile formats may be required.
Note: Use system approved thin bed mortars for areas that require waterproofing
in accordance with general certificate
of national technical approval or CE
conformity. Please contact us at the
address shown in this data sheet for
more details. As part of the installation
of the floor tiles, press the drain grate
frame into the thin bed adhesive until
flush with the tile covering. Tile adhesive can be applied below the grate
frame for additional support, if required.
10.Other coverings, such as coatings,
synthetic coverings etc. may be used
in principle, but are not explained in
greater detail here. Their use must be
clarified in advance. We will be pleased
to provide you with further recommendations upon request.
Assembly heights of
Schlüter®-KERDI-SHOWER boards
Sloped tray (b)
Height (max.)
31 mm
Levelling board (c)
Height
60 mm
33 mm
60 mm
1000 x 1000 mm
22 mm (TB)
1200 x 1200 mm
35 mm
60 mm
1500 x 1500 mm
39 mm
60 mm
900 x 1800 mm
40 mm
60 mm
Dimensions
  900 x   900 mm
1000 x 1000 mm
Schlüter®-KERDI-SHOWER-T
is a set consisting of the sloped tray (b)
and the Schlüter®-KERDI collar (a).
Schlüter®-KERDI-SHOWER-TB
is a sloped tray with a pre-adhered
Schlüter ®-KERDI waterproofing membrane.
Schlüter®-KERDI-SHOWER-TC
is a set consisting of the sloped tray (b),
the levelling board (c) and the Schlüter®KERDI collar (a).
a
Schlüter®-KERDI waterproofing collar
b
Schlüter®-KERDI-SHOWER sloped board
-
Note: The drain body and the drainage pipe
of the Schlüter®-KERDI-DRAIN-BASE floor
drain are inserted into the levelling board (c).
The board has a custom fit opening for the
drain body. The board also features a pipe
cut out that runs at a right angle to the wall
and diagonally to the wall corner.
Use a utility knife to make the necessary
cut outs along the embossed groove. The
board, which is divided into two parts for
easier handling, also has a tongue and
groove connection.
The sloped tray (b) already has the necessary gradient of > 2 % (except for long sides
of sloped trays in the dimension 90 x 180
cm). It features a custom fit opening for the
Schlüter®-KERDI-DRAIN bonding flange.
The board, which is divided into two parts
for easier handling, also has a tongue and
groove connection mechanism. Cutting
grooves are marked on the back for the
construction of circular showers.
The sloped tray (b) is installed in combination with the levelling board or can be used
separately, depending on the individual construction site situation (e.g. wood structure,
vertical drain, mortar substructure etc.).
The Schlüter®-KERDI collar (a) is available
in matching sizes for the sloped tray (or is
pre-adhered in the case of the sloped tray
Schlüter®-KERDI-SHOWER-TB) and features
a matching round cut-out (Ø 175 mm) for the
bonding flange insert.
Schlüter®-KERDI-SHOWER-T
Schlüter®-KERDI-SHOWER-TC
Schlüter®-KERDI-SHOWER-TB sloped board
Example Schlüter®-KERDI-SHOWER-TB
300
900 mm
8.6 Sch lü ter ® -K E R D I -SHO WER
c
Schlüter®-KERDI-SHOWER levelling board
Example:
Assembly with horizontal drain
1800 mm
Schlüter®-KERDI-SHOWER sloped board
KSTO 900 1800
Schlüter®-KERDI-SHOWER-SK
is a waterproofing set for floor level showers. Schlüter ® -KERDI-SHOWER-SK
includes Schlüter®-KERDI (1) for waterproofing the wall areas of showers as well
as the corresponding prefabricated parts
for internal corners (2) and collars for pipe
sleeves (3). The scope of supply also
includes Schlüter®-KERDI-KEBA sealing
band (4) for covering joints and internal
floor to wall connections, corners and
the sealing adhesive Schlüter®-KERDICOLL (6).
Schlüter®-KERDI-SHOWER-SK is suitable for combination with the floor components Schlüter®-KERDI-SHOWER-T,
-TB, and -TC as well as -L and -LC or for
conventional floor level showers installed
with screed.
Schlüter®-KERDI-SHOWER-SKB
also includes a Schlüter®-KERDI-DRAINBASE floor drain.
Schlüter®-KERDI-SHOWER-SKB is suitable for conventional floor level showers and for combination with the floor
elements Schlüter®-KERDI-SHOWER-T,
-TB, and -TC.
8. 6 Schlüter ® -KERDI - S HO WER
b
B
a
A
Schlüter -KERDI-KERECK/FI
(2 pieces)
Schlüter -KERDI-200
(1 m x 5 m*) / (1 m x 10 m**)
®
®
c
C
Text template for tenders:
Text template for tenders:
Text template for tenders:
_______units Schlüter ®-KERDI-SHOWER-T
as a floor level shower tray of rigid extruded
polystyrene foam, suitable for the installation
of tiles and able to withstand the weight of
wheelchairs, featuring a trapezoid shaped
adhesive structure and pre-fabricated slope
> 2% (except long side sloped trays 90 x 180
cm) in the dimension
  90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
  90 x 180 cm
with the matching Schlüter®-KERDI waterproofing collar made of crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding
with the tile adhesive, to be supplied and professionally installed while observing the manufacturer instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
_______units of Schlüter®-KERDI-SHOWER-TB
as a shower tray element for floor level tiling,
suitable to bear the weight of wheelchairs,
made of expanded rigid polystyrene foam with
an existing gradient of > 2% and a pre-adhered
Schlüter ®-KERDI waterproofing membrane
consisting of a crack bridging polyethylene
waterproofing membrane with anchoring fleece
laminated on both sides for bonding with the
tile adhesive, to be supplied in the size
100 x 100 cm
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
_______units of Schlüter®-KERDI-SHOWERSKB bonded waterproofing set including
floor drain, consisting of Schlüter®-KERDI as
a crack bridging polyethylene waterproofing
membrane with anchoring fleece laminated
on both sides for bonding with the tile adhesive, Schlüter®-KERDI-BAND as a sealing band
made of polyethylene foil with anchoring fleece
laminated on both sides for covering abutting seams and floor-wall transitions, 2 pieces
Schlüter®-KERDI-KERECK as pre-fabricated
interior corner pieces made of polyethylene foil
with anchoring fleece laminated on both sides
for sealing corner areas, 2 pieces Schlüter®KERDI-KM as a polyethylene pipe collar with
a 22 mm opening and anchoring fleece laminated on both sides, 1 piece Schlüter®-KERDICOLL as a two component sealing adhesive
based on a solvent free acrylate dispersion
and a cement reactive powder for adhering
and sealing the overlaps of Schlüter®-KERDI
membranes and 1 piece Schlüter®-KERDIDRAIN-BASE as a floor drain with odour trap,
horizontal coupling DN 40/DN 50 (40/50 mm)
and a bonding flange insert with stainless steel
grate 10 x 10 cm (Design 1) to construct
floor level showers with dimensions up to
1.0 m x 1.0 m
floor level showers with dimensions up to
2.0 m x 2.0 m
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
d
D
Schlüter®-KERDI-KEBA
(12.5 cm x 10 m)
Schlüter®-KERDI-KM
(2 pieces)
Note:
***Only the waterproofing set Schlüter®KERDI-SHOWER-SKB includes
Schlüter®-KERDI-DRAIN-BASE.
***
Item no. KSS 5 and KSS5 KD 10 EH
40* = Waterproofing set for up to 1000
x 1000 mm
Item no. KSS 10 and KSS 10 KD 10 EH 40**
= Waterproofing set for up to 2000 x
2000 mm or 900 x 1800 mm
f
F
e
E
Schlüter -KERDI-DRAIN-BASE
(1 piece)
incl. grate and frame set
®
Schlüter®-KERDI-COLL
(1.85 kg*) / (4.25 kg**)
Text template for tenders:
______units Schlüter®-KERDI-SHOWER-TC
as a 2 piece floor level shower tray of rigid
expanded polystyrene foam, suitable for the
installation of tiles and able to withstand the
weight of wheelchairs, featuring a trapezoid
shaped adhesive structure and pre-fabricated
slope > 2% (except long-side sloped trays 90
x 180 cm) with the matching 2 piece levelling
board for insertion of the drain body and the
drain pipe, in the dimension
  90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
  90 x 180 cm
with the matching Schlüter®-KERDI waterproofing collar made of crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding
with the tile adhesive, to be supplied and professionally installed while observing the manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
Text template for tenders:
_______ units of Schlüter®-KERDI-SHOWER-SK
bonded waterproofing set, consisting of
Schlüter®-KERDI as a crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding with
the tile adhesive, Schlüter®-KERDI-KEBA as
a sealing band made of polyethylene foil with
anchoring fleece laminated on both sides for
covering abutting joints and floor to wall transitions, 2 pieces Schlüter®-KERDI-KERECK as
pre-fabricated interior corner pieces made of
polyethylene foil with anchoring fleece laminated on both sides for sealing corner areas,
2 pieces Schlüter®-KERDI-KM as a polyethylene pipe collar with a 22 mm opening and
anchoring fleece laminated on both sides, 1
piece Schlüter®-KERDI-COLL as a two component sealing adhesive based on a solventfree acrylate dispersion and a cement reactive
powder for adhering and sealing the overlaps
of Schlüter®-KERDI membranes to construct
floor level showers with dimensions up to
1.0 m x 1.0 m
floor level showers with dimensions up to
2.0 m x 2.0 m
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
Schlüter-Systems KG · Schmölestraße 7 · D-58640 Iserlohn · Tel.: +49 2371 971-261 · Fax: +49 2371 971-112
[email protected] · www.schlueter-systems.com
Schlüter-Systems Ltd · Units 4–5 Bardon 22 · Beveridge Lane · Coalville · Leicestershire · LE67 1TE
Tel.: +44 1530 813396 · Fax: +44 1530 813376 · [email protected] · [email protected] · www.schluter.co.uk
Schlüter®-KERDI-SHOWER
8.6
Drainage
floor level showers
Product data sheet
Application and Function
Art.-Nr. 552 860 – 10/12 Issue – Reprints will invalidate this issue.
8.6 Sc h l üte r ® - KE RD I -S HOWE R
Schlüter®-KERDI-SHOWER is a modular
system for the construction of floor level
showers with ceramic tiles.
The sloped trays, which have optional
levelling boards, are available in different
dimensions.
The matching floor drain system
Schlüter®-KERDI-DRAIN-BASE is available as a set. Depending on the conditions
of the construction site, other variants of
Schlüter®-KERDI-DRAIN may be used
as well. Various sets of Schlüter®-KERDI
are available for waterproofing the wall
areas.
The surface of the sloped trays already has
the necessary gradient of > 2 % (except for
long sides of sloped trays with the dimension 180 x 90 cm)
The drain body and the drainage pipe are
inserted into the levelling board, which represents the lowest possible construction
height and can be adjusted, for example
with a mortar layer.
The available base dimensions are:
90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
90 x 180 cm
Smaller dimensions can easily be cut to
size with a utility knife. The material features prepared cutting grooves for circular
cuts.
The matching floor drain for the system,
Schlüter®-KERDI-DRAIN-BASE (for horizontal drainage), has a drain capacity of
0.4 l/s.
Matching variants of Schlüter ®-KERDIDRAIN are available for special cases with
higher drain capacity needs, vertical drains,
or other requirements.
Schlüter ®-KERDI-SHOWER stands out
for its particularly easy and reliable installation. Together with Schlüter ®-KERDI
waterproofing component, this meets the
requirements of the German Certificate of
National Technical Approval (abP) for Category A waterproofing assemblies. The
system components of Schlüter®-KERDISHOWER are packaged as a set and can
easily be combined as required.
Horizontal drainage
Vertical drainage
Schlüter®-KERDI-SHOWER-SK
is a waterproofing set for floor level showers. Schlüter ® -KERDI-SHOWER-SK
includes Schlüter®-KERDI (1) for waterproofing the wall areas of showers as well
as the corresponding prefabricated parts
for internal corners (2) and collars for pipe
sleeves (3). The scope of supply also
includes Schlüter®-KERDI-KEBA sealing
band (4) for covering joints and internal
floor to wall connections, corners and
the sealing adhesive Schlüter®-KERDICOLL (6).
Schlüter®-KERDI-SHOWER-SK is suitable for combination with the floor components Schlüter®-KERDI-SHOWER-T,
-TB, and -TC as well as -L and -LC or for
conventional floor level showers installed
with screed.
Schlüter®-KERDI-SHOWER-SKB
also includes a Schlüter®-KERDI-DRAINBASE floor drain.
Schlüter®-KERDI-SHOWER-SKB is suitable for conventional floor level showers and for combination with the floor
elements Schlüter®-KERDI-SHOWER-T,
-TB, and -TC.
8. 6 Schlüter ® -KERDI - S HO WER
b
B
a
A
Schlüter -KERDI-KERECK/FI
(2 pieces)
Schlüter -KERDI-200
(1 m x 5 m*) / (1 m x 10 m**)
®
®
c
C
Text template for tenders:
Text template for tenders:
Text template for tenders:
_______units Schlüter ®-KERDI-SHOWER-T
as a floor level shower tray of rigid extruded
polystyrene foam, suitable for the installation
of tiles and able to withstand the weight of
wheelchairs, featuring a trapezoid shaped
adhesive structure and pre-fabricated slope
> 2% (except long side sloped trays 90 x 180
cm) in the dimension
  90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
  90 x 180 cm
with the matching Schlüter®-KERDI waterproofing collar made of crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding
with the tile adhesive, to be supplied and professionally installed while observing the manufacturer instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
_______units of Schlüter®-KERDI-SHOWER-TB
as a shower tray element for floor level tiling,
suitable to bear the weight of wheelchairs,
made of expanded rigid polystyrene foam with
an existing gradient of > 2% and a pre-adhered
Schlüter ®-KERDI waterproofing membrane
consisting of a crack bridging polyethylene
waterproofing membrane with anchoring fleece
laminated on both sides for bonding with the
tile adhesive, to be supplied in the size
100 x 100 cm
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
_______units of Schlüter®-KERDI-SHOWERSKB bonded waterproofing set including
floor drain, consisting of Schlüter®-KERDI as
a crack bridging polyethylene waterproofing
membrane with anchoring fleece laminated
on both sides for bonding with the tile adhesive, Schlüter®-KERDI-BAND as a sealing band
made of polyethylene foil with anchoring fleece
laminated on both sides for covering abutting seams and floor-wall transitions, 2 pieces
Schlüter®-KERDI-KERECK as pre-fabricated
interior corner pieces made of polyethylene foil
with anchoring fleece laminated on both sides
for sealing corner areas, 2 pieces Schlüter®KERDI-KM as a polyethylene pipe collar with
a 22 mm opening and anchoring fleece laminated on both sides, 1 piece Schlüter®-KERDICOLL as a two component sealing adhesive
based on a solvent free acrylate dispersion
and a cement reactive powder for adhering
and sealing the overlaps of Schlüter®-KERDI
membranes and 1 piece Schlüter®-KERDIDRAIN-BASE as a floor drain with odour trap,
horizontal coupling DN 40/DN 50 (40/50 mm)
and a bonding flange insert with stainless steel
grate 10 x 10 cm (Design 1) to construct
floor level showers with dimensions up to
1.0 m x 1.0 m
floor level showers with dimensions up to
2.0 m x 2.0 m
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
d
D
Schlüter®-KERDI-KEBA
(12.5 cm x 10 m)
Schlüter®-KERDI-KM
(2 pieces)
Note:
***Only the waterproofing set Schlüter®KERDI-SHOWER-SKB includes
Schlüter®-KERDI-DRAIN-BASE.
***
Item no. KSS 5 and KSS5 KD 10 EH
40* = Waterproofing set for up to 1000
x 1000 mm
Item no. KSS 10 and KSS 10 KD 10 EH 40**
= Waterproofing set for up to 2000 x
2000 mm or 900 x 1800 mm
f
F
e
E
Schlüter -KERDI-DRAIN-BASE
(1 piece)
incl. grate and frame set
®
Schlüter®-KERDI-COLL
(1.85 kg*) / (4.25 kg**)
Text template for tenders:
______units Schlüter®-KERDI-SHOWER-TC
as a 2 piece floor level shower tray of rigid
expanded polystyrene foam, suitable for the
installation of tiles and able to withstand the
weight of wheelchairs, featuring a trapezoid
shaped adhesive structure and pre-fabricated
slope > 2% (except long-side sloped trays 90
x 180 cm) with the matching 2 piece levelling
board for insertion of the drain body and the
drain pipe, in the dimension
  90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
  90 x 180 cm
with the matching Schlüter®-KERDI waterproofing collar made of crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding
with the tile adhesive, to be supplied and professionally installed while observing the manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
Text template for tenders:
_______ units of Schlüter®-KERDI-SHOWER-SK
bonded waterproofing set, consisting of
Schlüter®-KERDI as a crack bridging polyethylene waterproofing membrane with anchoring
fleece laminated on both sides for bonding with
the tile adhesive, Schlüter®-KERDI-KEBA as
a sealing band made of polyethylene foil with
anchoring fleece laminated on both sides for
covering abutting joints and floor to wall transitions, 2 pieces Schlüter®-KERDI-KERECK as
pre-fabricated interior corner pieces made of
polyethylene foil with anchoring fleece laminated on both sides for sealing corner areas,
2 pieces Schlüter®-KERDI-KM as a polyethylene pipe collar with a 22 mm opening and
anchoring fleece laminated on both sides, 1
piece Schlüter®-KERDI-COLL as a two component sealing adhesive based on a solventfree acrylate dispersion and a cement reactive
powder for adhering and sealing the overlaps
of Schlüter®-KERDI membranes to construct
floor level showers with dimensions up to
1.0 m x 1.0 m
floor level showers with dimensions up to
2.0 m x 2.0 m
and professionally installed while observing the
manufacturer’s instructions.
Art.-No.:________________________________
Material:_________________________ ....../unit
Labour: _________________________ ....../unit
Total price:_______________________ ....../unit
Schlüter-Systems KG · Schmölestraße 7 · D-58640 Iserlohn · Tel.: +49 2371 971-261 · Fax: +49 2371 971-112
[email protected] · www.schlueter-systems.com
Schlüter-Systems Ltd · Units 4–5 Bardon 22 · Beveridge Lane · Coalville · Leicestershire · LE67 1TE
Tel.: +44 1530 813396 · Fax: +44 1530 813376 · [email protected] · [email protected] · www.schluter.co.uk
Schlüter®-KERDI-SHOWER
8.6
Drainage
floor level showers
Product data sheet
Application and Function
Art.-Nr. 552 860 – 10/12 Issue – Reprints will invalidate this issue.
8.6 Sc h l üte r ® - KE RD I -S HOWE R
Schlüter®-KERDI-SHOWER is a modular
system for the construction of floor level
showers with ceramic tiles.
The sloped trays, which have optional
levelling boards, are available in different
dimensions.
The matching floor drain system
Schlüter®-KERDI-DRAIN-BASE is available as a set. Depending on the conditions
of the construction site, other variants of
Schlüter®-KERDI-DRAIN may be used
as well. Various sets of Schlüter®-KERDI
are available for waterproofing the wall
areas.
The surface of the sloped trays already has
the necessary gradient of > 2 % (except for
long sides of sloped trays with the dimension 180 x 90 cm)
The drain body and the drainage pipe are
inserted into the levelling board, which represents the lowest possible construction
height and can be adjusted, for example
with a mortar layer.
The available base dimensions are:
90 x   90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
90 x 180 cm
Smaller dimensions can easily be cut to
size with a utility knife. The material features prepared cutting grooves for circular
cuts.
The matching floor drain for the system,
Schlüter®-KERDI-DRAIN-BASE (for horizontal drainage), has a drain capacity of
0.4 l/s.
Matching variants of Schlüter ®-KERDIDRAIN are available for special cases with
higher drain capacity needs, vertical drains,
or other requirements.
Schlüter ®-KERDI-SHOWER stands out
for its particularly easy and reliable installation. Together with Schlüter ®-KERDI
waterproofing component, this meets the
requirements of the German Certificate of
National Technical Approval (abP) for Category A waterproofing assemblies. The
system components of Schlüter®-KERDISHOWER are packaged as a set and can
easily be combined as required.
Horizontal drainage
Vertical drainage
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement