Windows Vista Wireless Connection

Windows Vista Wireless Connection
Setup Instructions for
ArgoAir Wireless Network
Windows Vista
University Guests: A username and password are required to use ArgoAir. Your UWF host can obtain a guest
ArgoAir account from the ITS Help Desk or a Local Service Provider.
1. From the Start menu open the Control Panel, click Network and Internet, click Network and Sharing
Center, and click Set up a connection or network.
1
2. Select Manually connect to a wireless network, then click Next.
3. Enter the following:
- Network name: uwf-argo-air
- Security type: WPA2-Enterprise
- Encryption type: AES
- Place a checkmark beside Start this connection automatically.
Then, click Next.
2
4. Select Change connection settings.
5. Enter the following:
- Secuity Type: WPA2-Enterprise
- Encryption Type: AES
- Choose a network authentication method: Protected EAP (PEAP)
- Place a checkmark beside Cache user information for subsequent connections to this network
Click Settings…
3
6. Verify the following:
- Validate server certificate IS NOT checked
- Authentication Method: Secured password (EAP-MSCHAP v2)
- Enable Fast Reconnect IS NOT checked
Click Configure…
7. REMOVE the checkmark from Automatically use my Windows logon name and password (and
domain if any), then click OK in each of the open windows.
4
8. When in the range of the wireless network, Windows will attempt to connect. When Windows Vista
attempts to connect for the first time, a balloon pop-up will appear in the taskbar.
Click the balloon.
9. Enter the following:
- In the User name field, enter your ArgoNet username.
- In the Password field, enter your ArgoNet password.
- Leave the Logon domain field blank.
Click OK. Windows will log into the ArgoAir network.
10. After you connect for the first time, Windows remembers your credentials and will automatically log into
the network without asking you to reenter your username and password. Windows will only ask for your
username and password again if you change your password.
11. In order to print to a WEPA kiosk from your computer, download WEPA print drivers from wepanow.com.
Your WEPA username and password was sent to you in an email from WEPA. This WEPA account is
linked to your Nautilus Card account. For more information on WEPA printing, see
uwf.edu/studentprinting.
If you have questions, please contact the ITS Help Desk at (850) 474-2075 or [email protected]
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement