Eaton_9PX_Datasheet_Com5
Datasheet Eaton 9PX UPS 5–22kVA
Eaton 9PX UPS
5–22kVA
Energy efficient power protection
Performance and Efficiency
• Double conversion topology. The Eaton 9PX constantly
monitors power conditions and regulates voltage and
frequency.
Rack/Tower versatile
9PX 1:1 is an
Energy Star®
qualified UPS
• With up to 95% efficiency in online double conversion mode
and 98% in high-efficiency mode the 9PX provides the
highest efficiency level in its class to reduce energy and
cooling costs.
• With a 0.9 power factor the 9PX delivers 28% more power
than any UPS in its class. It powers more servers than other
UPSs with equivalent VA ratings and lower power factors.
• With a RT (Rack/tower) versatile form factor the 9PX is the
most compact solution in its class delivering up to 5400W in
only 3U and 10kW in only 6U.
Manageability
• The new graphical LCD provides clear information on the
UPS’s status and measurements on a single screen (in seven
languages). LCD display position can be adjusted to offer the
best viewable angle for tower and rack usage.
• The 9PX can meter energy consumption. kWh values
can be monitored using the LCD or Eaton’s Intelligent
Power® Software.
9PX 11kVA with maintenance bypass
Advanced protection for:
• Small and Medium Datacentre
• IT, Networking, Storage and Telecom
• Infrastucture, Industrial and Medical
• Load segment control enables prioritised shutdowns of
nonessential equipment to maximise battery runtime for
critical devices. It can also be used to remotely reboot lockedup network equipment or to manage scheduled shutdowns
and sequential start-ups.
• The 9PX offers Serial, USB and relay connectivity, plus an extra
slot for an optional card (Network card delivered as standard
on Netpack version). Eaton’s Intelligent Power® Software is
compatible with all major OS including virtualisation software
such as VMware and Hyper-V is included with each UPS.
Availability and Flexibility
• The internal bypass allows service continuity in case of
internal fault, a maintenance bypass is also available (as
standard on HotSwap version) for easy replacement of the
UPS without powering down critical systems.
• The 9PX can be paralleled to achieve twice the power of
unitary product using HotSync technology, without extra cost
on the initial purchase.
• Stronger, longer battery life: Eaton ABM® battery management
technology uses an innovative three-stage charging technique
that extends battery life by up to 50%.
• More runtime can be added with up to 12 external hotswappable battery modules, able to run systems for hours if
necessary. The additional battery modules are automatically
recognised by the UPS.
Eaton 9PX UPS Technical Spec­i­fi­ca­t ions
5
8 IEC 10A sockets (2 groups
of 4 manageable sockets)
with cable retention system
6
2 IEC 16A sockets with cable
retention system
7
DB 9 with output contacts
8
USB and serial ports
9
Input/Ouput connection
1
Remote Off/On and Remote
Power Off connectors
2
Slot for Network-MS,
ModBus-MS or Relay-MS cards
3
Parallel operation
port (DB15)
4
External battery module
(EBM) connector with
automatic detection (RJ11)
Eaton 9PX 6kVA 1:1
Technical Specifications
5kVA 1:1
6kVA 1:1
6kVA 3:1
8kVA 1:1 or 3:1
11kVA 1:1 or 3:1
Rating (kVA/kW)
5kVA/4.5kW
6kVA/5.4kW
6kVA/5.4kW
8kVA/7.2kW
11kVA/10kW
Electrical Characteristics
Technology
On-line double conversion with Power Factor Correction (PFC) system
Input voltage
Input voltage range
200/208/220/230/240V 1:1
200/208/220/230/240V/250V 1:1, 380/400/415 3:1
176-276V without derating (up to 100-276V with derating) 1:1, 305V-480V without derating (up to 175V-480V with derating) 3:1
Output voltage/THDU
200/208/220/230/240V +/– 1%; THDU <2%
Input frequency range/THDI
40-70Hz, 50/60Hz autoselection, frequency converter as standard, THDI < 5%
Efficiency
Up to 94% in Online mode, 98% in Hi-Efficiency mode
Short circuit current
90A
Overload capacity
102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 500ms 102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 900ms
90A
Up to 95% in Online mode, 98% in Hi-Efficiency mode
90A
120A
150A
Connections
Terminal block (up to 10 mm2)
Terminal block +
2 controlled groups of 4 IEC C13 (10A) + 2 IEC C19 (16A)
Input
Outputs
Outputs with HotSwap Maintenance Bypass Terminal block + 3 IEC C13 (10A) + 2 IEC C19 (16A)
Terminal block (up to 16mm2)
Terminal block
Terminal block + 4 IEC C19 (16A)
Batteries
Typical backup times at 50 and 70% load*
9PX
13/10 min
11/8 min
30/20min
20/15 min
13/9min
9PX + 1 EBM
60/40 min
48/34 min
70/45min
48/32 min
32/21 min
9PX + 4 EBM
220/150 min
170/120 min
210/140 min
140/100 min
100/70 min
Battery management
ABM®andTemperaturecompensatedchargingmethod(userselectable),automaticbatterytest,deepdischargeprotection,automaticrecognitionofexternalbatteryunits.
Communication
Communication ports
1USBport,1RS232serialport(USBandRS232portscannotbeusedsimultaneously),4drycontacts(DB9),1miniterminalblockforremoteOn/Offand1forremotepowerOff,
1 DB15 for parallel operation.
Communication slot
1 slot for Network-MS card (included in Netpack versions), ModBus-MS or Relay-MS cards.
Operating conditions, standards and approvals
Operating temperature
0 to 40°C continuous
Noise level
<45dB
Safety
IEC/EN 62040-1, UL 1778 (1:1 version)
<45dB
<48db
EMC, performance
IEC/EN 62040 -2, FCC Class A (1:1 version), IEC/EN 62040-3 (Performance)
Approvals
CE, CB report (TUV), UL (1:1 version)
<48db
<50db
Dimensions H x W x D/Weight
UPS dimensions
440(19’’)*130(3U)*685mm
440(19’’)*130(3U)*685mm
440(19’’)*260(3U+3U)*700mm 440(19’’)*260(3U+3U)*700mm 440(19’’)*260(3U+3U)*700mm
UPS weight
48kg
48kg
88kg
84kg (1:1), 88kg (3:1)
86kg (1:1), 88kg (3:1)
EBM dimensions
440(19’’)*130(3U)*645mm
440(19’’)*130(3U)*645mm
440(19’’)*130(3U)*680mm
440(19’’)*130(3U)*680mm
440(19’’)*130(3U)*680mm
EBM weight
68kg
68kg
65kg
65kg
65kg
Power module dimensions
-
-
440(19’’)*130(3U)*700mm
440(19’’)*130(3U)*700mm
440(19’’)*130(3U)*700mm
Power module weight
-
-
23kg
19kg (1:1), 23kg (3:1)
21kg (1:1), 23kg (3:1)
Customer Service and Support
Warranty
2 years warranty
* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc
Parts Numbers
9PX 5kVA 1:1
9PX 6kVA 1:1
9PX 8kVA 1:1
9PX 11kVA 1:1
9PX 6kVA 3:1
9PX 8kVA 3:1
9PX 11kVA 3:1
UPS with HotSwap Maintenance Bypass
9PX5KiBP
9PX6KiBP
9PX8KiBP
9PX11KiBP
9PX6KiBP31
9PX8KiBP31
9PX11KiBP31
UPS with Network Card and Rack Kit
9PX5KiRTN
9PX6KiRTN
–
–
–
–
–
UPS with HotSwap MBP, Network Card
and Rack Kits
–
–
9PX8KiRTNBP
9PX11KiRTNBP
9PX6KiRTNBP31
9PX8KiRTNBP31
9PX11KiRTNBP31
EBM
9PXEBM180
9PXEBM180
9PXEBM240
9PXEBM240
9PXEBM240
9PXEBM240
9PXEBM240
Power Module
–
–
9PX8KiPM
9PX11KiPM
9PX6KiPM31
9PX8KiPM31
9PX11KiPM31
HotSwap Maintenance Bypass
MBP6Ki
MBP6Ki
MBP11Ki
MBP11Ki
MBP11Ki31
MBP11Ki31
MBP11Ki31
9PX ModularEasy (paralleling kit)
9PXMEZ6Ki
9PXMEZ6Ki
9PXMEZ11Ki
9PXMEZ11Ki
–
–
–
Supercharger with Rack Kit
–
–
SC240RT
SC240RT
SC240RT
SC240RT
SC240RT
1.8m Battery Connection Cable
EBMCBL180
EBMCBL180
EBMCBL240
EBMCBL240
EBMCBL240
EBMCBL240
EBMCBL240
Accessories
Rack kit: 9RK, Transformer (Single Phase): TFMR11Ki, Battery Integration System: BINTSYS
9PX Parallel*
9PX 10kVA 1:1
(5kVA redundant)
9PX 12kVA 1:1
(6kVA redundant)
9PX 16kVA 1:1
(8kVA redundant)
9PX 22kVA 1:1
(11kVA redundant)
9PXM10KiRTN
9PXM12KiRTN
9PXM16KiRTN
9PXM22KiRTN
*9PX Parallel system includes 2 x 9PX, ModularEasy (Parallel kit), rail kits and network cards
In the interests of continuous product improvement all specifications are subject to change without notice.
© 2013 Eaton Corporation, All Rights Reserved, Eaton 9PX Rev D, November 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement