инструкцию для Alpine KTX-WXE-CA8

инструкцию для Alpine KTX-WXE-CA8
KTX-WXE-CA8
Car Model
Model Year
CAMRY
2012
INSTALLATION KIT
Owner’s Manual
This owner’s manual will give you clearly understanding about installation.
For making installation correctly, please read this manual carefully before operating installation.
1
Component Parts
Audio Panel
2
Alpine-Toyota power cord
Alpine-Toyota
Antenna cable
Bracket
Connecting Diagram
For other Audio connectivity
please refer to the head unit
Owner’s manual.
Connect the connector
tightly into the port.
IN INT (Pink/Black)
ALPINE ELECTRONICS OF ASIA PACIFIC CO., LTD.
555 Rasa Tower 1, Unit 2601-2602, 26th Floor, Phaholyothin Rd.,
Chatuchak, Bangkok, Thailand 10900
Tel : +662-937-0505 Fax : +662-937-0569
P.ANT (Blue/White)
10P
REMO (Blue)
Toyota audio
connector
6P
P.BRK (Yellow/Blue)
http://www.alpine-asia.com
4
10P
Alpine-Toyota
Power cord
1
6P
3
Removing Vehicle Parts
5
2 Plastic Cover
Screws 4 Pcs.
A/C Console
3
A/C Connector
4
8
Bracket
Audio Connector
A/C Control
Connector
6
7
5
Audio panel
1
9
A/C Controller
4
1. Remove part no. 1 by
removing all clips off.
2. Remove plastic cover 2 by
removing all clips off.
3. Remove A/C console 3 by
removing all clips off.
4. Remove A/C connector 4 from
A/C console.
5. Remove audio panel 5 by
removing all 4 screws.
6. Remove all connectors 6 from
the head unit.
7. Remove all A/C control
connectors 7 from A/C
controller 9
8. Remove bracket 8 both left
and right sides of audio panel
by removing all 10 screws (5
screws each side).
9. Remove A/C controller 9 from
audio panel by removing all
clips off.
!!! Caution !!!
Make sure that all the accessories are
off so that you do not cause a spark
Harness Connection
Screw 3 Pcs.
2
Bracket
!!! Caution !!!
Make connection between connectors
tightly (until you hear “Click”)
3
1
A/C Controller
Retracing Vehicle Parts
7 Plastic cover
A/C Console
6
4
Screw 4 Pcs.
5
A/C Connector
A/C Control
Connector
3
2
Connect these connectors firmly
8
2
Alpine-Toyota antenna cable
1
Alpine-Toyota
power cord
1
Alpine-Toyota power cord
Connect Alpine-Toyota
power cord into unit
2
1. Connect A/C controller 1 with
audio panel by pressing all clips
tightly.
2. Install bracket 2 with audio panel
both left and right sides by using 4
black screws (2 screws each side).
3. Install the head unit 3 from rear
side into audio panel by using
6 screws (3 screws each side).
The head unit
Screw 2 Pcs.
1. Connect the Alpine-Toyota
power cord 1 into the car
connectors both 10P and 6P.
2. Connect the Alpine-Toyota
antenna cable 2 into the car
connectors.
10P
6P
Screw 2 Pcs.
Screw
3 Pcs.
6
Antenna cable
Bracket Assembly
3
1. Connect the Alpine-Toyota
connector 1 and the Alpinetoyota antenna cable 2 into
the head unit tightly until you
hear “Click”.
2. Connect A/C Control connector 3 into A/C control tightly
until you hear “Click”.
3. Drive 4 screws 4 to make it
tight between the head unit
and console.
4. Connect A/C connector 5
with A/C console.
5. Connect A/C console 6 into
car console by pressing all
clips to dash panel until you
hear “click”.
6. Install plastic cover 7 by
pressing all clips tightly into
console.
7. Install part no. 8 by pressing
all clips tightly into console.
Remark
Perform full function checks for the
head unit. If no problem found
assemble back all the parts to their
original position.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement