Point-of-Use Accessories Data Sheet

Point-of-Use Accessories Data Sheet
Point-of-Use Accessories
Accessories
DCATLABO1286XEN2
GAUGE
All gauges are Oxygen cleaned, free of oil and grease.
Standard Process Connection*
G 1/4" male / acc. EN 562
Marking
bar; OXYGEN
Graphical Symbol
“Free of Oil and Grease”, EN 562
Standard Array of Connection*
6 o’clock
GAUGE D43650-00G0036
Diameter
1.97" / 50 mm
*Please consult TESCOM for additional pressure ranges or special array
of connections (e.g. centrical connection)
Gauges - Standard Stock Items
ARRAY OF
CONNECTION
STANDARD
PART NUMBER
STAINLESS STEEL
PART NUMBER
BRASS
MAXIMUM
PRESSURE
RED MARK
D43650-00G0036
D44150-00G0036
44 psi / 3.0 bar
22 psi / 1.5 bar
6 o’clock
D43650-00G0056
D44150-00G0056
73 psi / 5.0 bar
44 psi / 3.0 bar
6 o’clock
D43650-00G0156
D44150-00G0156
218 psi / 15.0 bar
145 psi / 10.0 bar
6 o’clock
Metering Valves*
Nominal diameter: DN 2
Inlet Connection:
G 1/4" male
Outlet Connection: 6 mm compression fitting + 6 mm hose connector
PART NUMBER
MATERIAL
TYPE
D43215-AR-05
Brass
Diaphragm Metering Valve
D43216-AR-05
Stainless Steel
Diaphragm Metering Valve
D41663-AO-05
Brass
Needle Metering Valve
NEEDLE METERING VALVE
D41663
DIAPHRAGM METERING VALVE
D43216
*Please reference datasheets “Needle Metering Valve” and
“Diaphragm Metering Valve” for detailed technical specifications.
Flame Arrestor
DESCRIPTION
PART NUMBER
Flame Arrestor H2, 10 bar
143.077
Kit Flame Arrestor, O2 and Air, 20 bar
D50410-12-06
Kit Flame Arrestor, Acethylene
D50410-22-06
www.tescom.com
FLAME ARRESTOR D42349
(PART OF D50410)
Accessories
Handwheel Knobs, Color Grey
PART NUMBER
DESCRIPTION
D43204-6
Handknob Diaphragm Metering Valve (DMV)
D45121-6
Cap DMV
D43237-6-PP
“Turning knob, Shut-off valve”
D45121-6
Cap, Shut-off valve
D43683-6
Handwheel MiniLabo
D44973
Cap MiniLabo
D44977-XX
Gas specific label MiniLabo acc. EN 13792
D43684
Handwheel MiniLabo
D45122-6
Handknob Needle Metering Valve (NMV)
D45123-6
Cap NMV
CAP MINILABO
D44973
HAND WHEEL MINILABO
D43683-6
Stainless Steel Fittings for Inlet and Outlet of Pressure Regulator
PART NUMBER
DESCRIPTION
D42644
G 1/4" to 6 mm tube
D43757
G 1/4" to 8 mm tube
D41933
G 1/4" to 10 mm tube
D41362
G 1/4" to 1/8" tube
FITTING G 1/4" TO 10 MM
D41933
Brass Fittings for Inlet and Outlet of Pressure Regulator
PART NUMBER
DESCRIPTION
D41329
G 1/4" to 1/8" tube or hose
D41359
1/8" hose nozzle for D41329
D40619
G 1/4" to 6 mm Cu-tube or hose
D41681
6 mm hose nozzle for D40619
D42669
G 1/4" to 8 mm Cu-tube
D41756
G 1/4" to 10 mm Cu-tube
6 MM HOSE NOZZLE FOR D40619
D41681
Brass Fittings for Outlet Valve
PART NUMBER
DESCRIPTION
D41309
G 1/8" to 1/8" tube / hose
D41359
1/8" hose nozzle for D41309
D40076
G 1/8" to 6 mm tube / hose
D41681
6 mm hose nozzle for D40076
FITTING G 1/4" TO 6 MM CU-TUBE OR
HOSE D40619
WARNING! Do not attempt to select, install, use or maintain this product until you have read and fully understood the TESCOM Safety,
Installation and Operation Precautions.
DCATLABO1286XEN2 © 2012 Emerson Process Management Regulator Technologies, Inc. All rights reserved. 05/2012.
Tescom, Emerson Process Management, and the Emerson Process Management design are marks of one of the Emerson Process
Management group of companies. All other marks are the property of their respective owners.
www.tescom.com
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement