Eaton Stack Light Spare Parts & Accessories Overview

Eaton Stack Light Spare Parts & Accessories Overview
Prices as of April 27, 2016. Check Web site for most current prices.
Stacklight Accessories
and Replacement Parts
Company
Information
Drives
Soft Starters
Alarm Units Specifications
Audible alarms
Bi-tonal
Three different audible alarms are avail- Volts Adjustment Typical MonoCurrent
tonal
Part
Price
Part
able for E26 stacklights in 24 and AC/DC Range
Draw Number
Number
120 VAC/DC. One alarm per stacklight
24V 64 dB to 90 dB 12.6 mA E26BQV2
$100.00 E26BNV2
may be included in the assembly and is
mounted atop the stacklight. No tools are
required for attaching or wiring the alarm.
120V
64 dB to 90 dB 11.5 mA
E26BQV4
$96.00
E26BNV4
The alarm draws very little current and
units used in 120 VAC applications should
be switched with dry contact type output
devices. Leakage from triac modules will
activate the alarm in the “OFF” condition.
Motors
Price Intermittent Price
Part Number
Retired
E26BPV2
$100.00
Retired
E26BPV4
$100.00
Alarm
UnitUnit
Dimensions
Alarm
Dimensions
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
2.56
(65)
Alarms are available in mono-tonal,
bi-tonal, and intermittent tones. The sound
levels can be adjusted from 64 to 90 dB.
Typical current draw is 11 to 13 mA for
24V and 120V versions. Check out our
Web site for .wav samples of the alarm
tones.
Power
Transmission
0.59
(15)
Sensors:
Encoders
Sensors:
Limit Switches
1.69
(42.9
Audible alarm
Dimensions in inches (millimeters)
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Extension Tube Specifications
Extension tubes and
mounting bases
Description
The E26 stacklight base may be mounted
directly to the machine or control cabinet.
For greater height, extension tubes and
mounting bases are available.
The mounting base is anodized alloy and
threaded to 3/4” NPT for compatibility
with standard pipe and conduit threads.
The extension tubes are also anodized
alloy and threaded to 3/4” NPT. Extension
tubes are available in four straight lengths
from 3/4” to 30”, and a 2” x 2.5” rightangle extension model.
For use with standard
mounting base or 3/4”
NPT threaded hub --black
anodized aluminum.
Description
Length
Height A* with
Mounting Base
Part Number
Price
0.79” (20mm)
1.77” (45mm)
E26BHU
$11.00
6.30” (160mm)
7.28” (185mm)
E26BJU
$22.00
14.17” (360mm)
15.16” (385mm)
E26BKU
$37.00
29.92” (760mm)
30.91” (785mm)
E26BMU
$62.00
Part Number
Price
E26BRU
$10.50
Dimensions
Right angle extension tube 2.00”(50.8 mm) x 2.50”(63.5 mm)
for E26 stacklights
Mounting Base Specifications
Description
Notes
Mounting base for optional elevated mounting Standard 4-hole
using extension tube. Black anodized cast zinc. mounting base.
Part Number
Price
E26S109
Retired
Extension tube with mounting
Extension
tube with
mounting
base *Height
dimension
“A”base
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
*Height dimension "A"
Pneumatics:
Tubing
Pneumatics:
Air Fittings
2.00
(50.8)
Appendix
Book 2
Terms and
Conditions
A
2.50
(63.5)
Mounting base
Extension tube
Right angle extension tube
Book 2 (14.3)
www.automationdirect.com/stacklights
Pilot Devices
ePD-161
Prices as of April 27, 2016. Check Web site for most current prices.
Stacklight Replacement Parts
Gasket
Gasket Specifications
Description
Notes
Part Number
Price
Replacement mounting gasket
Included with stacklight
base.
E26S105
$2.50
O-ring
O-ring Specifications
Description
Notes
Part Number
Price
Replacement lens O-ring
Included with light
modules.
E26S106
$2.50
Replacement lamps
Incandescent Replacement Lamps
Description
Volts AC/DC
Incandescent replacement lamps
110/120V
Part Number
E26S11
(marked on base
28-6019-4)
Price
$6.00
LEDs
These LEDs can be used as replacement
bulbs to convert a standard incandescent lamp to an LED type.
Note:Use with dry contact outputs when operating
with AC. Triac leakage current will illuminate
the LED module.
Replacement LEDs
Volts AC/ Color
DC
Part Number Price
Volts
AC/DC
Color
Part Number Price
–
–
–
–
120V
Red
E26S138
$76.50
24V
Amber
E26S118
$76.50
120V
Amber
E26S139
$76.50
24V
Green
E26S121
$76.50
120V
Green
E26S142
$76.50
–
–
–
–
120V
Blue
E26S143
$76.50
*Note: 120V White LED Modules are not available.
Book 2 (14.3)
ePD-162
Pilot Devices
1-800-633-0405
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement