Painless Performance Mustang Direct Fit Wire Harness Installation Manual

Below you will find brief information for Wire Harness Mustang Direct Fit. This manual provides step-by-step instructions on how to install the Wire Harness Mustang Direct Fit in your vehicle. It includes detailed information on routing the harness, making connections, and testing the system. The manual also includes a wire connection index and fuse requirements. The Wire Harness Mustang Direct Fit is designed to be used in 1969-1970 Ford Mustangs, with 22 circuits. It is a complete wiring system for your vehicle, that includes sections for the engine, headlights, under-dash and interior, and rear lights.

PDF Download
Document
Wire Harness Mustang Direct Fit Installation Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 22 circuits
  • 600 volt, 257°F, TXL wire
  • Color-coded and marked wires
  • Engine, headlight, under-dash, and rear light sections
  • Built-in anti-theft feature
  • Easy installation for beginners

Frequently asked questions

The Wire Harness Mustang Direct Fit is a complete wiring system that replaces the original factory harness in your 1969-1970 Ford Mustang. It includes all the necessary wires and components for the engine, headlights, under-dash and interior, and rear lights.

The Wire Harness Mustang Direct Fit has a built-in anti-theft feature. Simply removing the fuse labeled “coil” from the fuse block will prevent the vehicle from starting.

Even if you have no electrical experience, this harness is designed for easy installation. All wires are color-coded and marked for easy identification. Additionally, the harness is designed to be routed through and around open areas inside of the car, making it very easy to install
ALP:
Preparing document for printing…
0%