Product Specifications CSAPDU9VPI   Environmental Specifications

Product Specifications CSAPDU9VPI   Environmental Specifications
Product Specifications
CSAPDU9VPI
Passive VoIP Amplifier, unity forward/reverse, nine ports, with power inserter Environmental Specifications
Operating Temperature ­40 °C to +60 °C (­40 °F to +140 °F) Safety Standard CE
|
SCTE Electrical Specifications Rx (Uplink)
Operating Frequency Band 5 – 42 MHz Insertion Loss, video ports 0.00 dB Flatness ±1.0 dB Return Loss, minimum 20.00 dB Noise Figure, maximum 18.00 dB Electrical Specifications Tx (Downlink)
Operating Frequency Band 54 – 1002 MHz Gain, video ports 0.00 dB Flatness ±1.0 dB Return Loss, minimum 20.00 dB Noise Figure, maximum 10.00 dB Electrical Specifications VoIP
Insertion Loss Rx, VoIP ports, maximum 4.30 dB Insertion Loss Tx, VoIP ports, maximum 4.50 dB Return Loss, VoIP ports, minimum 20.00 dB Electrical Specifications Isolation
Isolation at Frequency Band, output to output, minimum 25 dB @ 5–15 MHz | 27 dB @ 15–40 MHz
40–42 MHz | 25 dB @ 54–1002 MHz Isolation at Frequency Band, output to VoIP, minimum 25 dB @ 5–1002 MHz Isolation at Frequency Band, VoIP to output, minimum 25 dB @ 5–1002 MHz |
25 dB @ Isolation at Frequency Band, power port to RF output, minimum 60 dB @ 5–1002 MHz Electrical Specifications
Group Delay, 2nd channel, maximum 30 ns Group Delay, channel 3, maximum 15 ns Group Delay, channel 4–6, maximum 5 ns ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 1 of 3
May 2, 2016
Product Specifications
CSAPDU9VPI
Impedance 75 ohm Operating Current at Voltage 380 mA @ 15 Vdc Distortion Performance (CTB), minimum 73 ­dBc (relative to carrier) Distortion Performance (CSO), minimum 65 ­dBc (relative to carrier) Distortion Performance (X­Mod), minimum 73 ­dB Distortion Performance (CCN), minimum 60 ­dBc (relative to carrier) Distortion Performance (DTO), minimum 60 ­dBc (relative to carrier) Distortion Performance (DSO), minimum 55 ­dBc (relative to carrier) Hum Modulation, minimum ­75.00 dB Group Delay, reverse, maximum 25 ns Shielding Effectiveness, minimum 100 dB Surge Capability Test Method ANSI/SCTE 81 | IEEE C62.41­B3 (6 kV, 3000 A, Combination wave) on all ports Surge Capability Waveform 1.2/50 voltage and 8/20 current combination waveform | 100 KHz ring wave waveform General Specifications
Device Type All ports down amplifier | Two­way subscriber amplifier | VoIP subscriber amplifier Video Ports, quantity 8 VoIP Passive Ports, quantity 1 Brand HomeConnect® Application Indoor
Includes Power adapter
Video Standard NTSC Patent Number 7912431 (expires 8/2/2025) |
Outdoor |
Power inserter Packed Dimensions
Carton Quantity 20 Height 190.50 mm
|
7.50 in Length 508.00 mm
|
20.00 in Width 247.65 mm
|
9.75 in Shipping Weight 9.07 kg
|
20.00 lb Regulatory Compliance/Certifications
Agency
RoHS 2011/65/EU
ISO 9001:2008
Classification
Designed, manufactured and/or distributed under this quality management system
Included Products
SVPI — Power Inserter for Subscriber Amplifiers CSHMPI — Power Inserter for Subscriber Amplifiers with High Isolation CSMPI — Power Inserter for Subscriber Amplifiers CSAPAE415V500 — Power Adapter for Subscriber Amplifiers, ac/dc, 15 V, 500 mA ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 2 of 3
May 2, 2016
Product Specifications
CSAPDU9VPI
* Footnotes
Distortion Performance (CCN), minimum CCN—Composite Carrier to Noise; 77 analog, 124 digital—256 QAM channel loading Distortion Performance (CSO), minimum CSO—Composite Second Order; 77 analog, 124 digital—256 QAM channel loading Distortion Performance (CTB), minimum CTB—Composite Triple Beat; 77 analog, 124 digital—256 QAM channel loading Distortion Performance (DSO), minimum DSO—Discrete Second Order; 13 MHz and 19 MHz, 55 dBmV per carrier loading Distortion Performance (DTO), minimum DTO—Discrete Third Order; 13 MHz and 19 MHz, 55 dBmV per carrier loading Distortion Performance (X­Mod), minimum X­Mod—Cross Modulation; 77 analog, 124 digital—256 QAM channel loading Group Delay, 2nd channel, maximum Channel (3.58 MHz Span) Group Delay, channel 3, maximum Channel (3.58 MHz Span) Group Delay, channel 4–6, maximum Channel 2 (3.58 MHz Span) Noise Figure, maximum Total amplifier contribution ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 3 of 3
May 2, 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement