Atlas | M-1A | AtlasSound.com - Benton Electronics Supply

AtlasSound.com - Benton Electronics Supply
INDUSTRY STANDARD AUTO TRANSFORMER
AT Series. UL listed high-quality auto transformer series provides the advantages of excellent
frequency response, low insertion loss and reliable performance for volume control application in
25 and 70.7V systems. Attenuation is accomplished in ten steps plus positive off position. (No stop
between maximum and off position to prevent switch damage). Contacts are silver plated for noisefree operation. Includes stainless steel plate, stamped and filled dial scale with skirted black knob.
MODEL
AT10 shown in standard backbox
AT10/35/100
Series
E408100
★
★
★
ATTENUATION
PER STEP
TOTAL
ATTENUATION
INSERTION
LOSS
PLATE
SIZE
PLATE
TYPE
PLATE
COLOR
AT10(-PA)
10
3dB
27dB
.4dB
1 gang
Stainless
NA
AT35(-PA)
35
3dB
27dB
.4dB
1 gang
Stainless
NA
AT100(-PA)
100
3dB
27dB
.4dB
1 gang
Stainless
NA
AT Decora Series. Include White and Ivory Decora Style plastic plates, with matching skirted knobs.
★
★
★
AT10D (decora)
POWER
RATING
(Watts)
MODEL
POWER
RATING
(Watts)
ATTENUATION
PER STEP
TOTAL
ATTENUATION
INSERTION
LOSS
PLATE
SIZE
PLATE
TYPE
PLATE
COLOR
AT10D
10
3dB
33dB
.4dB
1 gang
Plastic Decora
White/Ivory
AT35D
35
3dB
27dB
.6dB
1 gang
Plastic Decora
White/Ivory
AT100D
100
3dB
27dB
.6dB
1 gang
Plastic Decora
White/Ivory
AUTO TRANSFORMER WITH PRECISION LEVEL CONTROL
E408-100. Specially designed for attenuation in masking and sound reinforcement systems where
fine tuning of level control is required. Employs a ten-position, non-shorting rotary switch without
stop. Attenuation rate is 1.5dB per step. (All other specifications are the same as the AT Series
including the UL listing).
MODEL
RM Series
★ E408-100
POWER
RATING
(Watts)
ATTENUATION
PER STEP
TOTAL
ATTENUATION
INSERTION
LOSS
PLATE
SIZE
PLATE
TYPE
PLATE
COLOR
100
1.5dB
15dB
.6dB
1 gang
Stainless
NA
PRIORITY PAGING OPTION
AT, E408 series
Side View
Top View
DIMENSIONAL SPECIFICATIONS
PLATE MOUNTED ATTENUATORS
MODEL
AT10
AT10-PA
AT35
AT35-PA
AT100
AT100-PA
E408-100
A
B
41/2" 21/8"
41/2" 21/8"
41/2" 21/8"
41/2" 21/8"
41/2" 21/2"
41/2" 21/2"
41/2" 25/8"
C
23/4"
23/4"
23/4"
23/4"
23/4"
23/4"
21/16"
D
E
23/4" 13/4"
23/4" 13/4"
23/4" 13/4"
23/4" 13/4"
23/4" 13/4"
23/4" 13/4"
23/4" 25/16"
PA Series. Priority paging feature bypasses the effect of the attenuator to provide program level
selection of individual emergency and paging signals at the amplifier. Option is available on all AT
Series attenuators. The SPDT relay is operated with 24VDC at 10mA. Includes protective relay cover
to ensure lasting trouble-free performance. (All other specifications except for dimensions are the
same as AT Models.)
RACK MOUNT OPTION
RM Series. For attenuation convenience of rack-mounted equipment in cabinets and consoles,
the AT and E408 Series attenuators are available without mounting plate for rack panel installation.
Attractive matte black polycarbonate dial scale overlay with adhesive backing replaces the mounting
plate. Includes skirted black knob. Overlay size is 2" sq. (51mm). (To order, simply add RM after
the selected attenuator model number. Example: AT10-RM or AT10-PARM.) (Dial scale overlays
to retrofit existing installations are available, see hardware section Model HX23.) For easy rack
mounting of RM series attenuators, see model AT PLATE, catalog Section 5.
UL
R
LISTED
UL 813 & UL 2043 Listed.
AtlasSound.com
WHISPERTOUCH® IMPEDANCE-MATCHING VOLUME CONTROLS
DWT/DSUM Series
(Shown with cover plate)
FOUR
Devices provide clear, distortion-free music reproduction when one or multiple loudspeaker pairs are
powered by a single amplifier. Additionally, 8 Ohm models provide load protection. Attenuation is
accomplished in ten steps.
Original. These innovative volume controls feature impedance-matching to protect the amplifier
and balance the audio signal, fine-tune level control to adjust low listening levels to the perfect
setting, and an easy-grip low-profile knob. The knob features smooth detents and make-beforebreak contacts for smooth transition when changing volume settings. It measures 7⁄8" dia. x 3⁄8"
projection. Series is offered in 8 Ohm, 70V stereo and 70V mono versions to satisfy any volume
control requirement. All models have a frequency response of 20Hz - 20kHz (-3dB, +0). Models
with 8 Ohm impedance measure up to 23⁄4" deep for mounting into a 20 cu. in. or backless E.O. box.
Recommended models include Carlon Model B120A. Models for 70V use are 21⁄2" deep for mounting
into an 18 or 20 cu. in. backbox. Units accept 14 to 20-gauge wire for termination and are offered in
Decora-styling or with standard plate. DWT-8 available in white or ivory. SWT-8 available only in ivory.
Switched. These include all the features of Original WhisperTouch® plus an on/off switch and
status indicator light. The “smart” relay switch automatically puts speakers into “stand-by” mode
making them available rather than indiscriminately active when the audio system is powered
on. Audio is accessed by simply touching the switch. The small yet helpful status indicator light
provides quick visual assessment of the audio system availability. Switched and Summing/Switched
models require a 12VDC power supply (order separately).
Summing. Offered in Original and Switched versions, Summing models combine left and right stereo signals to supply a single speaker with fullfidelity music reproduction in small or secondary listening areas. Switched and Summing/Switched models require a 12VDC power supply (order
separately).
Plate not included except for DWT-8, SWT-8.
SWT/SSUM Series
ORIGINAL
MODEL
SERIES★
IMPEDANCE
VOLTAGE
POWER
RATING
PLATE
STYLE**
TYPE
REQUIRES
STEPS
20 cu. in.
E.O. Box
22.5dB
Total
20 cu. in.
E.O. Box
& power supply
22.5dB
Total
DWT-8
8Ω
—
50W
Decora
Stereo
SWT-8
8Ω
—
50W
Standard****
Stereo
DWS-8
8Ω
—
50W
Decora
Stereo,
Switched
SWS-8
8Ω
—
50W
Standard
Stereo,
Switched
DWS-15
—
70.7V
15W
Decora
Stereo,
Switched
*
DWSM-15
—
70.7V
15W
Decora
Mono,
Switched
*
SWS-15
—
70.7V
15W
Standard
Stereo,
Switched
*
SWSM-15
—
70.7V
15W
Standard
Mono,
Switched
DSUM-8
8Ω
—
25W
Decora
L/R Summing
SSUM-8
8Ω
—
25W
Standard
L/R Summing
DSUMS-8
8Ω
—
25W
Decora
L/R Summing
Switched
SSUMS-8
8Ω
—
25W
Standard
L/R Summing
Switched
SWITCHED
*
DWS/DWSM/DSUMS Series
(Shown with cover plate)
18 cu.in. E.O.
Box & power
supply
SUMMING
20 cu. in.
E.O. Box
22.5dB
Total
20 cu. in.
E.O. Box
& power supply
22.5dB
Total
SWS/SSUMS Series
SUMMING/SWITCHED
*-Other decora-style devices require a cover plate. Order separately.
* Suffix model with color: ivory (-I), white (-W). ** Decora-style plate measures 15⁄16" W x 2 5⁄8" H and requires a cover plate (order separately).
Standard single-gang plate measures 23⁄4" W x 4 1⁄2" H. ***Order 12 VDC Model PS12-10 or PS-M12 separately (see below).
****Available in ivory only
POWER SUPPLIES FOR SWITCHED WHISPERTOUCH
PS-M12. Unit is a compact UL-listed 12VDC, 300mA power supply with a 6-foot cord. The required
input voltage is 120V. Supply includes a 1⁄8" mini-plug for direct connection to the
M-1CB4A connector block (powers up to four F-1 flashers) or for use with up to three Switched
WhisperTouch volume controls.
MODEL
PS-M12
POWERS UP TO
3 Switched WhisperTouch
INPUT
OUTPUT (Nom.)
Weight
120VAC
12VDC @ 300mA
.50 lbs (.2kg)
800.876.3333 Customer Service • 800.765.3435 Fax Ordering
PS-M12
DAT8ST
DAT35ST70
DAT Series
Side View
DAT Series
Top View
DAT Series. Atlas Sound offers traditional autoformer controls to provide excellent stereo
performance and maximum speaker-handling capability. Models include positive off and full-power
pass through at the maximum setting. Contacts are make-before-break for smooth transition.
Models with 8 Ohm impedance are suitable for residential stereo and voice-coil circuit application.
Models for 25 or 70.7 Volt use provide level control in distributed constant-voltage systems. Singlegang models mount standard E.O. boxes 21⁄2" deep. Includes white and ivory knobs, inserts and trim
plates.
• Choose DAT8ST to control speaker volume when impedance matching is not necessary such as
single-pair installations or when multi-channel amplifiers are used for individual zones.
• Combine DAT8ST with a separate impedance-matching switching device (AST Series) to design a
system with multiple loudspeaker pairs.
MODEL
SERIES*
POWER
RATING
DAT8ST
DAT35ST70
SYSTEM
ATTENUATION
INSERTION
LOSS
PLATE
SIZE
30dB
.5dB
1 gang
27dB
.5dB
1 gang
IMPED.
VOLTAGE
PER STEP
TOTAL
50W RMS/
Ch.
8Ω
—
3dB**
35W RMS/
Ch.
—
25 or 70.7V
3dB***
*Suffix model with color: ivory (-I) or white (-W).
***Models have one step of 6dB before off.
** Models have two steps of 6dB before off. Note: Attenuation curve is steeper for a 25V line.
DIMENSIONAL SPECIFICATIONS-PLATE MOUNTED ATTENUATORS
MODEL
A
B
C
D
E
DAT8ST
41⁄16"*
21⁄2"
29⁄16"
15⁄16"
115⁄16"
DAT35ST70
41⁄16"*
21⁄2"
29⁄16"
15⁄16"
115⁄16"
* Exposed plate height is 25⁄8"
Decora® is a Registered Trademark of Leviton Corporation.
IMPEDANCE-MATCHING SPEAKER SELECTORS
ASL-6A
(Shown with rack brackets)
ASL-6A. Impedance-matching loudspeaker switching system provides control of up to six
loudspeaker pairs positioned in multiple room applications. All volume controls for each loudspeaker
pair are located on the front panel for easy access. Attenuation is accomplished in 10 steps. Units
accommodate any combination of 8 and/or 16 Ohm loudspeakers. Choose ASL-6A to control
speakers in retrofit or pre-wire installations where speaker wiring goes directly to the main
equipment cabinet; not to individual volume controls. ASL model offers individual speaker volume
controls with individual A/B source selection and separate on/off controls for each loudspeaker pair.
Unit features a mar-resistant black finish. Dimensions are 17" W x 15⁄8" H x 57⁄8" D and can be shelf or
19" rack-mounted (brackets included). Wire capacity is 14-24 gauge. Not for use with 70V systems.
AST-6. Impedance-matching loudspeaker switching system provides control of up to six
loudspeaker pairs positioned in multiple room applications. Controls for each loudspeaker pair are
located on the front panel for easy access. Unit accommodates any combination of 8 and/or 16
Ohm loudspeakers. Use AST Series to offer additional functionality to systems using traditional (nonWhisperTouch) volume controls such as the DAT8ST. AST devices include separate on/off controls
for each loudspeaker pair and one A-B source selector switch for overall system control. Units
feature a mar-resistant black finish. Dimensions are 17" W x 15⁄8" H x 57⁄8" D and can be shelf or 19"
rack-mounted (brackets included). Wire capacity is 14-24 gauge. Not for use with 70V systems.
MODEL
SPEAKER
CAPACITY
SPEAKER
SELECTOR
VOLUME
CONTROLS
A/B SOURCE
CAPACITY
POWER HANDLING
RMS/AUDIO*
WEIGHT
LBS.
ASL-6A
6 Pair
6 on/off
6
6 Individual
70/210 Watts
10.5 lbs.
(4.8kg)
AST-6
6 Pair
6 on/off
—
1 System
40/120 Watts
6.5 lbs.
(2.9kg)
AST-6
* Per channel, 8 Ohm load, single room (measured @ 50 Hz continuous)
AtlasSound.com
STAINLESS STEEL WALL PLATES WITH INDUSTRY STANDARD CONNECTORS
Professional appearance with easy and cost-efficient installation is achieved by using Atlas Sound wall plates. Models include mounting holes on
standard box mount center [39⁄32" (83mm)] and plate mounting hardware.
SG-XLR-F1 Single Gang Stainless Steel Plate with (1) Female 3 pin XLR
SG-XLR-F2 Single Gang Stainless Steel Plate with (2) Female 3 pin XLR
SG-XLR-M1 Single Gang Stainless Steel Plate with (1) Male 3 pin XLR
SG-XLR-M2 Single Gang Stainless Steel Plate with (2) Male 3 pin XLR
SG-NL4MP-1 Single Gang Stainless Steel Plate with (1) NL4MP 4 pole connector
SG-NL4MP-2 Single Gang Stainless Steel Plate with (2) NL4MP 4 pole connector
SG-QTRSL-F1 Single Gang Stainless Steel Plate with (1) Female Locking TRS connector
SG-QTRSL-F2 Single Gang Stainless Steel Plate with (2) Female Locking TRS connector
SGWP-38GH Single Gang Stainless Steel Plate 3⁄8” Hole & Grommet
* INDUSTRY STANDARD MIC JACK CONNECTOR MODELS
RECEPTACLES WITH & WITHOUT CONNECTORS INSTALLED
MRB Series. Convenient receptacle floor box with easy-open lid requires no tools to access
connectors. Lid is mounted on a pin hinge that lifts easily and swings to the side for access and
then falls into a closed position when not in use. Four level legs are provided on a 4" octagon
box. Models are offered with choice of mounting plate, punched to accept a variety of connector
styles, and are available with listed selection of factory-installed connectors. Lid and trim cover are
cast commercial red brass with a brushed finish. Optional matching carpet ring provides attractive
finished appearance.
MODEL
MOUNTS CONNECTOR
MODEL
MRB-1
Switch C3M, C3F, C4M, C4F
INCLUDES CONNECTOR
MRB-1-13
C3F Type
MRB-PL
Blank receptacle plate
MRB-TR
Optional carpet trim ring for all models
MRB Series
FB4XLRF. Atlas Sound FB4XLRF floor box assembly provides a simple solution for recessed mic
inputs. The unit is designed for easy installation into wood stages and platforms. (4) Female XLR
connectors are recessed and slant loaded into the enclosure. A hinged steel cover plate to provides
protection for cable connectors. Connectors are standard "D sub" type and may be easily removed to
allow substitution of other "D sub" devices. Not designed for use in concrete pour applications!
B
FB4XLRF cut out and over all dimensions.
A
A
C
FB4XLRF
CUT OUT L/W (A)
MOUNTING
HOLE HORZ (B)
MOUNTING
HOLE VERT (C)
5" (127mm)
51⁄2" (140mm)
4" (102mm)
800.876.3333 Customer Service • 800.765.3435 Fax Ordering
HARDWARE ACCESSORIES
HX41/42
HXLP Series
HX11-P
HX12-R
HX23
HX21-B
HX25-2
HX24-1
MODEL
DESCRIPTION
HXL-3-13
Wall/Panel Receptacle, Female 3 Conductor; C3F or Equal
HXL-3-13N
Wall/Panel Receptacle, Female 3 Conductor; Locknut Mounting; B3F or Equal
HXLP-3-11
Cable connector, Female 3 Conductor; A3F or Equal
HXLP-3-12
Cable connector, Female 3 Conductor; A3M or Equal
HX11-P
SPDT Momentary Push Button Switch, 1⁄4 Amp Contacts, Black Button, Hardware
HX12-R
2 Pole, 6 Position Rotary Switch Continuous Rotation; 60˚ Indexing; 3⁄8" Bushing Length;
3
⁄8" Shaft Length, Includes Hardware
HX21-B
Skittered Knob; Black; 11⁄4" Diameter Fits 1⁄4 Shaft; One Set Screw
HX22-W
Skittered Knob; White; 11⁄4" Diameter Fits 1⁄4 Shaft; One Set Screw
HX23
2" x 2' Poly carbonate Dial Scale. 3⁄8" Center Hole. Black Finish
HX24-1
Single Gang S/S Plate; Dial Scale Stamped and Paint Filled 3/5" Center Mount Hole,
Mounts to Standard E.O. Box; With Hardware
HX25-2
Double Gang S/S Plate; Dial Scale Stamped and Paint Filled 3/5" Center Mount Hole,
Mounts to Standard E.O. Box; With Hardware
HX26-2
Double Gang S/S Plate with Dial Scale for Attenuator and 6 Position Rotary Switch
HX31-345
3" Speaker with 45 Ohm Voice Coil. Magnet Weight 1.47 oz.
HX41-50
50 Ohm Wirewound Potentiometer, 3 Watt. Continuous Rotation. 3/8" Bushing Length;
3/8" Long Flatted Shaft. Includes Mounting Hardware
HX76
Felt Tabs (100 pieces)
AT Plate-052. The new Atlas Sound AT Plate is perfect for rack mount applications where
attenuators are required. The Atlas Sound AT Plate, a 2RU H #14 gauge plate pre-punched to
accommodate up to (6) Atlas Sound rack mount attenuators. Attractive black filler plugs are
provided for applications where the AT Plate will not be fully “loaded”. The plate is finished in flat
black epoxy to better blend in with other rack mount equipment.
Three new Atlas Sound -RM
Attenuators shown mounted on the
new Atlas Sound AT Plate
HX26-2
HX31-345
HX76
AtlasSound.com
MICRO INFRARED REPEATERS & FLASHERS
M-1A Series. Atlas Sound IR repeaters allow the operation of virtually any IR-controlled A/V
component from multiple room locations. The M-1A Series repeater will receive the IR signal and
rebroadcast it to the small F-1 flasher LED positioned on the front of each A/V component. The F-1
forwards the signal to the source component’s IR receiver.
These micro repeaters feature an attractive, flush, white lens that blends with any white surface.
Their high sensitivity enables use within a 40 foot range with fast reaction time and minimal
interference. Repeaters are available installed on a white decorator-style subplate (cover plate not
included) or separately for flush-mounting in a ceiling, wall, cabinet or speaker grille.
F-1 Series. Small F-1 flasher LEDs are shipped with an adhesive backing and 1⁄8" phone plugs for
connection to all IR-controlled A/V components. Up to six flasher units may be connected to a single
M-1A repeater using two M-1CB4B connector blocks or any standard adapter (by others). (Note:
some high-end A/V components are equipped to accept hard-wired IR signals. In this case, F-1
flashers would not be necessary.)
MODEL
DESCRIPTION
CURRENT DRAW
STYLE
COLOR
M-1A
IR Repeater
12mA
Flush Mount
White Lens
M-1AJW
IR Repeater
12mA
Wall Mount, Supplied
on Decorator Subplate*
White Lens,
White Subplate
Flasher
.05mA
Surface Mount
Black Lens, Black Cord
F-1
F-1
M-1AJW*
* Order Sound decorator-style cover plate separately.
** Order Model M-1A separately.
STAND-ALONE IR REPEATER SYSTEM
M-1CB4B. For installation flexibility, the M-1CB4B amplified connector block is offered as a plug-in
interface device that provides connections for an M-1A Series repeater, four F-1 flashers, and power
supply Model PS-M12. This configuration allows IR operation of up to four A/V components from up
to four room locations. The M-1CB4B offers 1⁄8" mini jacks for power supply Model PS-M12 and up
to four F-1 flashers; it also provides terminals for wiring up to four M-1A repeaters (rooms) in parallel
fashion and a data jack for connecting a mini-pin IR source or another M-1CB4B. The unit's amplified
circuit design supplies clear, strong IR data to source components.
This stand-alone IR repeater system requires: one M-1A repeater in each remote room location, one
M-1CB4B for every four A/V components, a PS-M12 power supply, and one F-1 flasher for each A/V
component. For installations which require control of more than four components or transmission
from more than four rooms, multiple M-1CB4B blocks may be used. (Note: each M-1A repeater can
control a maximum of six F-1 flashers.)
PS-M12. Unit is a compact UL-listed 12VDC, 200mA power supply with a 6-foot cord. The required
input voltage is 120V. Supply includes a 1⁄8" mini-plug for direct connection to the
M-1CB4B connector block (powers up to four F-1 flashers) or for use with up to three switched
WhisperTouch® volume controls.
M-1CB4B
PS-M12
Multiple Repeater / Emitter System
block for the M-1 Infrared Repeater System. It allows
connection of multiple repeaters to 4 emitters (flashers)
with no loss in signal strength.
+
+
+
Kitchen
Remote
Range:
Maximum 40'
at 30˚off axis.
A/V Receiver
Note:
Bedroom
Mutiple M-1
Infrared Repeaters
can be connected
to this point by
wiring them
in parallel.
DVD/
CD
Player
VCR
10:30 pm
+
+
+
Living Room
Use Three
Conductor Wire
F-1
Flasher
Emitters
(shielded or unshielded)
+
+
+
If shielded cable is used,
shield may be used as
the 3rd conductor
Wire Gauge
24 Gauge
22 Gauge
20 Gauge
18 Gauge
TV
Maximum
Wire Run
Distance
200'
600'
2000'
5000'
Family Room
+
+
ATLAS SOUND®
Sig
3
IR
Signal
FLASHERS
PSM-12
+
2
+
+
+
1
M-1CB4B
+
4
POWER
SUPPLY
Atlas Sound PSM-12
(Or any 9-12VDC Power Supply)
AT000504
M-1A
*(Shown with cover plate,
Sold separately.)
Earth Ground
Screw Lug
800.876.3333 Customer Service • 800.765.3435 Fax Ordering
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising