Beko WMY 1048 LB1 Washer User manual

Washing Machine

User’s Manual

WMY 1048 LB1

Document Number

2820523789/ 02-05-14.(10:57)

Please read this user manual first!

Dear Customer,

Thank you for prefering a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology.

Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.

Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

C

Important information or useful hints about usage.

A

Warning for hazardous situations with regard to life and property.

B

Warning for electric shock.

Recyclable materials.

Do not dispose of the packaging materials together with the domestic or other wastes.

Take them to the packaging material collection points designated by the local authorities.

This product was manufactured using the latest technology in environmentally friendly conditions.

TABLE OF CONTENTS

1 General safety instructions 5

1.1 Life and property safety ------------------------------------------------------------------------------5

1.2 Children's safety --------------------------------------------------------------------------------------6

1.3 Electrical safety ---------------------------------------------------------------------------------------6

1.4 Hot surface safety ------------------------------------------------------------------------------------7

2 Important instructions for environment 8

2.1 Compliance with WEEE Directive ---------------------------------------------------------------------8

2.2 Package information ---------------------------------------------------------------------------------8

3 Intended use 8

4 Your washing machine 9

4.1 Overview ----------------------------------------------------------------------------------------------9

4.2 Package Contents ------------------------------------------------------------------------------------10

4.3 Technical specifications ------------------------------------------------------------------------------11

4.4 Installation --------------------------------------------------------------------------------------------12

4.4.1 Appropriate installation location -------------------------------------------------------------------------------- 12

4.4.2 Removing packaging reinforcement --------------------------------------------------------------------------- 12

4.4.3 Removing the transportation locks ----------------------------------------------------------------------------- 12

4.4.4 Connecting water supply --------------------------------------------------------------------------------------- 13

4.4.5 Connecting the drain hose to the drain ------------------------------------------------------------------------ 14

4.4.6 Adjusting the feet ----------------------------------------------------------------------------------------------- 15

4.4.7 Electrical connection ------------------------------------------------------------------------------------------- 15

4.4.8 Initial use ------------------------------------------------------------------------------------------------------- 15

4.5 Preparation -------------------------------------------------------------------------------------------16

4.5.1 Sorting the laundry --------------------------------------------------------------------------------------------- 16

4.5.2 Preparing laundry for washing --------------------------------------------------------------------------------- 17

4.5.3 Things to be done for energy saving --------------------------------------------------------------------------- 17

4.5.4 Loading the laundry -------------------------------------------------------------------------------------------- 18

4.5.5 Correct load capacity ------------------------------------------------------------------------------------------- 18

4.5.6 Using detergent and softener ---------------------------------------------------------------------------------- 18

4.5.7 Tips for efficient washing --------------------------------------------------------------------------------------- 21

This product was manufactured using the latest technology in environmentally friendly conditions.

Washing Machine / User’s Manual 3 / EN

TABLE OF CONTENTS

4.6 Operating the product --------------------------------------------------------------------------------22

4.6.1 Control panel --------------------------------------------------------------------------------------------------- 22

4.6.2 Display symbols ------------------------------------------------------------------------------------------------ 22

4.6.3 Programme and consumption table ---------------------------------------------------------------------------- 23

4.6.4 Programme selection ------------------------------------------------------------------------------------------ 24

4.6.5 Programmes --------------------------------------------------------------------------------------------------- 24

4.6.6 Temperature selection ------------------------------------------------------------------------------------------ 27

4.6.7 Spin speed selection ------------------------------------------------------------------------------------------- 28

4.6.8 Auxiliary function selection ------------------------------------------------------------------------------------- 29

4.6.9 End Time ------------------------------------------------------------------------------------------------------- 30

4.6.10 Starting the programme -------------------------------------------------------------------------------------- 31

4.6.11 Loading door lock --------------------------------------------------------------------------------------------- 31

4.6.12 Changing the selections after programme has started ------------------------------------------------------- 31

4.6.13 Child Lock ----------------------------------------------------------------------------------------------------- 33

4.6.14 Cancelling the programme ----------------------------------------------------------------------------------- 33

4.6.15 End of programme -------------------------------------------------------------------------------------------- 33

4.6.16 Adjusting the VOLUME level ---------------------------------------------------------------------------------- 33

4.7 Maintenance and cleaning ---------------------------------------------------------------------------34

4.7.1 Cleaning the detergent drawer --------------------------------------------------------------------------------- 34

4.7.2 Cleaning the loading door and the drum ----------------------------------------------------------------------- 34

4.7.3 Cleaning the body and control panel --------------------------------------------------------------------------- 35

4.7.4 Cleaning the water intake filters-------------------------------------------------------------------------------- 35

4.7.5 Draining remaining water and cleaning the pump filter -------------------------------------------------------- 35

5 Troubleshooting 37

4 / EN Washing Machine / User’s Manual

1

General safety instructions

This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed.

1.1 Life and property safety

u

Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device. This will cause problems with your product.

u

Unplug the product if it is not in use.

u

Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by u unauthorized persons.

The water supply and draining hoses must be securely fastened u and remain undamaged. Otherwise, water leak may occur.

While there is still water inside the product, never open the loading door or remove the filter. Otherwise, risk of flooding and injury from hot water will occur.

u

Do not force open the locked loading door. Door can be opened a few minutes after the washing cycle ends. In case of forcing the loading door to open, the door and the lock mechanism may get u damaged.

Use detergents, softeners and supplements suitable for automatic u washing machines only.

Follow the instructions on the label of textiles and the detergent package.


1.2 Children's safety

u

This product can be used by the children who are at the age of 8 and over and the people whose physical, sensory or mental skills are not fully developed or who do not have necessary required experience and knowledge as long as they are supervised or trained about the safe use of the product and its risks. Children should not play with the device. Cleaning and maintenance works should not be performed by children unless they are supervised u by someone.

Packaging materials may be dangerous for the children. Keep packaging materials in a safe place away from reach of the children.

u

Electrical products are dangerous for the children. Keep the children away from the product when it is in use. Do not allow them to play with the product. Use child lock to prevent children u from intervening with the product.

Do not forget to close the loading door when leaving the room u where the product is located.

store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.

1.3 Electrical safety

u

If the product has a failure, it should not be operated unless it is u repaired by the Authorized Service Agent. Risk of electric shock!

This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

u

Plug the product into a grounded outlet protected by a 16 A fuse. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.


u

Do not wash the product by spraying or pouring water onto it! Risk u of electric shock!

Never touch the power cable plug with wet hands! Do not grab the power cord to unplug the machine, always unplug it by holding the socket with one hand, and pulling the plug with the other u hand.

Product should be unplugged during installation, maintenance, u cleaning and repair procedures.

If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person

(preferably an electrician) or someone designated by the importer in order to avoid possible risks.

1.4 Hot surface safety

While washing the laundry at high temperatures, the loading door glass will get hot. Considering this fact, during washing operation keep the children away from the loading door of the product to prevent them touching it.


2

Important instructions for environment

2.1 Compliance with WEEE Directive

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment

(WEEE).

This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

2.2 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

3

Intended use

• This product has been designed for domestic use. It is not for commercial purposes or it should not be used out of its intended use.

• The product must only be used for washing and rinsing of laundry that are marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or transportation.

• The service life of your product is 10 years. During this period, original spare parts will be available to operate the appliance properly.


4

Your washing machine

4.1 Overview

8

1- Power cable

2- Top panel

3- Control panel

4- Drain hose

5- Loading door

6- Filter cap

7- Adjustable feet

8- Detergent drawer


1

2

3

4

5

6

7

4.2 Package Contents

11 12

10

9 a b c

10 / EN

16 14

15

13

9- Power cable

10- Drain hose

11- Transportation safety bolts *

12- Mains water inlet hose (One of the following filter types is used for the mains hose connection.) a- Electronical water shut-off b- Mechanical water shut-off c- Standard

13- Liquid detergent container**

14- User Manual

15- Blind plug***

16- Plastic plug group

* Number of transportation safety bolts may change depending on the model of your machine.

** This may be supplied with the machine depending on the model of your machine.

*** This is supplied if your machine is equipped with double water inlet.

C

Figures in this manual are schematic and may not match the product exactly.

Washing Machine / User’s Manual

4.3 Technical specifications

Supplier name or trademark

Model name

Rated capacity (kg)

Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)

Maximum spin speed (rpm)

Height (cm)

Width (cm)

Depth (cm)

Net weight (±4 kg.)

Single Water inlet / Double Water inlet

• Available

Electrical input (V/Hz)

Total current (A)

Total power (W)

Main model code

Technical specifications may be changed without prior notice to improve the quality of the product.

Beko

WMY 1048 LB1

10

A+++

1400

84

60

62.5

84

- / •

220-240 V / 50Hz

10

2000-2350

9715


4.4 Installation

• Apply to the nearest authorized service agent for the installation of your product.

• Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

• Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

• Make sure that the installation and electrical connections of the product are performed by authorized service. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

4.4.1 Appropriate installation location

• Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other similar surfaces.

• When the washing machine and drier are placed on top of each other, their total weight

–when loaded– amounts to 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product in the environments where the temperature falls below 0 ºC.

• Leave a minimum space of 1 cm between the machine and the furniture.

• On a graduated floor, do not place the product next to the edge or on a platform.

4.4.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Do not make this operation alone by yourself.

4.4.3 Removing the transportation locks

1 Loose all bolts with an appropriate wrench until they turn freely (C).

2 Remove the transport safety bolts by turning them slightly.

3 Insert the plastic covers in the bag containing the user manual to the openings on the rear panel. (P)


A

CAUTION: Remove the transportation safety bolts before operating the washing machine!

Otherwise, the product will be damaged.

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

Install the transport safety bolts in reverse order of the disassembly procedure.

Never move the product without the transportation safety bolts properly fixed in place!

4.4.4 Connecting water supply

C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 10 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.

If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)

A CAUTION:

Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.

CAUTION:

Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

Connect the special water supply hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.

Make sure that the hot and cold water taps are connected correctly when the product is being installed. Otherwise, your laundry will come out hot at the end of the washing process and wear out.

1 Tighten the nuts of the hose by hand. Never use a tool when tightening the nuts.

2 When hose connection is completed, check whether there is leak problems at the connection points by opening the taps fully. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. In order to prevent the water leaks and resultant damages, keep the taps closed when you do not use the product.


4.4.5 Connecting the drain hose to the drain

• Attach the end of the drain hose directly to waste water drain, lavatory or bathtub.

A CAUTION:

Your drain house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! In order to prevent such situations and make sure that the machine performs water intake and discharge processes without any problem, fix the drain hose securely.

• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.

• In case the drain hose is elevated after laying it on the floor level or close to the ground

(less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.

• To prevent the waste water to go back into the machine again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.

• The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

• If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.


4.4.6 Adjusting the feet

A CAUTION:

In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.

CAUTION:

Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

1 Loosen the lock nuts on the feet by hand.

2 Adjust the feet until the product stands in a stable and balanced way.

3. Tighten all lock nuts by hand again.

4.4.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• Connection must comply with national regulations.

• Power cable plug must be within easy reach after installation.

• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.

• The voltage specified in the "Technical specifications" section must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

B

CAUTION: Damaged power cables must be replaced by the Authorized Service Agents.

4.4.8 Initial use

Before starting to use the product make sure that the preparations are made which are in line with the “Important

Safety and Environment Instructions” and the instructions in the “Installation” section.

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If this program is not available in your machine, apply the method which is described in the section 4.7.2.

C

Use an anti-limescale suitable for the washing machines.

Some water might have remained in the product due to the quality control processes in the production.

It is not harmful for the product.


4.5 Preparation

4.5.1 Sorting the laundry

* Sort laundry according to type of fabric, color, and degree of soiling and allowable water temperature.

* Always obey the instructions given on the garment tags.

SYMBOLS

Machine

Wash

Symbols

WASH

Water

Temperatures

Maximum

Symbol(s)

95 0 C

  

  

70 0 C

  

 

60 0 C

 

 

50 0 C 40 0 C

    

30 0 C



Drying

Symbols

Suitable for dryer

No Iron

Sensitive /

Delicate dry

Do not dry with dryer

Do not dry Do not dry-clean

DRYING

Drying

Settings

IRON

BLEACH

Iron

Dry or Steam

Maximum temperature

Iron at high temperature

Iron at medium temperature

Iron at low temperature

200 0 C 150 0 C 110 0 C

All bleaches are allowed

Bleach (sodium hypochlorite) can be used

Bleach is not allowed

Only bleaches without chlorine are allowed


4.5.2 Preparing laundry for washing

• Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case.

• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.

• Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.

• Place curtains in without compressing them. Remove curtain attachment items.

• Fasten zippers, sew loose buttons and mend rips and tears.

• Wash “machine washable” or “hand washable” labeled products only with an appropriate programme.

• Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.

• Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.

• Only use the dyes / color changers and descaling agents which are appropriate to machine wash. Always follow the instructions on the package.

• Wash trousers and delicate laundry turned inside out.

• Keep laundry items made of Angora wool in the freezer for a few hours before washing.

This will reduce pilling.

• Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the machine. Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage.

4.5.3 Things to be done for energy saving

Following information will help you use the product in an ecological and energy-efficient manner.

• Operate the product in the highest capacity allowed by the programme you have selected, but do not overload; see, "Programme and consumption table". See,

“Programme and consumption table"

• Always follow the instructions on the detergent packaging.

• Wash slightly soiled laundry at low temperatures.

• Use faster programmes for small quantities of lightly soiled laundry.

• Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.

• Do not use more detergent than the recommended amount specified on its package.


4.5.4 Loading the laundry

1. Open the laundry cover.

2. Put the laundry items into the machine in a loose manner.

3. Push and close the loading cover until you hear the locking sound. Ensure that no items are caught in the door. The loading door is locked while a programme is running. The door can only be opened a while after the programme comes to an end.

4.5.5 Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired.

Machine automatically adjusts the water amount according to the weight of the laundry put inside it.

A

WARNING:

Follow the information in the “Programme and consumption table”. When overloaded, machine's washing performance will drop. Moreover, noise and vibration problems may occur.

4.5.6 Using detergent and softener

C

2 3

When using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if available.

1

The detergent drawer is composed of three compartments:

– (1) for prewash

– (2) for main wash

– (3) for softener

– ( ) in addition, there is a siphon piece in the softener compartment.

Detergent, softener and other cleaning agents

• Add detergent and softener before starting the washing programme.

• While the washing cycle is in progress, do not leave the detergent dispenser open!

• When using a programme without prewash, do not put any detergent into the prewash compartment (compartment nr. "1").

• In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment nr. "1").

• Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the machine.

If you are using liquid detergent, do not forget to place the liquid detergent container into the main wash compartment (compartment number “2”).

Choosing the detergent type

Detergent type to be used depends on the fabric type and color.

• Use different detergents for coloured and white laundry.

• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) used solely for delicate clothes.


• When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.

• Wash woolens with special detergent made specifically for woolens.

A CAUTION:

Use only detergents manufactured specifically for washing machines.

CAUTION:

Do not use soap powder.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.

• Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

• Use lesser detergent for small amounts or lightly soiled clothes.

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

• Do not exceed the (>max<) level sign on the softener compartment.

• If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.

Using liquid detergents

If the product contains a liquid detergent cup:

• Put the liquid detergent container into the compartment no “2”.

• If the liquid detergent lost its fluidity, dilute it with water before putting it into the detergent container.

If the product does not contain a liquid detergent cup:

• Do not use liquid detergent for the prewash in a programme with prewash.

• Liquid detergent stains your clothes when used with Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent.

Using gel and tablet detergent

• If the gel detergent thickness is fluidal and your machine does not contain a special liquid detergent cup, put the gel detergent into the main wash detergent compartment during first water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before starting the programme.

• If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly into the drum before washing.

• Put tablet detergents into the main wash compartment (compartment nr. "2") or directly into the drum before washing.


Using starch

• Put the liquid soda, powder soda or the fabric dye into the softener compartment.

Do not use softener and starch together in a washing cycle.

Wipe the inside of the machine with a damp and clean cloth after using starch.

Using limescale remover

• When required, use limescale removers manufactured specifically for washing machines only.

Using bleaches

Add the bleach at the beginning of the washing cycle by selecting a prewash program.

Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleaching agent while the machine is taking water from the detergent compartment during first rinsing step.

• Do not use bleaching agent and detergent by mixing them.

• Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleach onto the laundry and do not use it with the colored items.

• When using oxygen-based decolorant, select a program which washes the laundry at a low temperature.

• Oxygen-based decolorant can be used with the detergent; however, if it is not at the same consistence, first put detergent in the compartment number “2” in the detergent dispenser and wait for the machine to flush the detergent when taking in water. While the machine continues taking in water, add decolorant in the same compartment.


4.5.7 Tips for efficient washing

Clothes

Light Colours and Whites

(Recommended temperature range based on soiling level: 40-90 oC)

Colours

Black/Dark

Colours

(Recommended temperature range based on soiling level: cold -40 oC)

(Recommended temperature range based on soiling level: cold -40 oC)

Delicates/

Woolens/Silks

(Recommended temperature range based on soiling level: cold

-30 oC)

Heavily

Soiled

(difficult stains such as grass, coffee, fruits and blood.)

Normally

Soiled

(For example, stains caused by body on collars and cuffs)

Lightly

Soiled

(No visible stains exist.)

It may be necessary to pretreat the stains or perform prewash. Powder and liquid detergents recommended for whites can be used at dosages recommended for heavily soiled clothes.

It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches.

Powder and liquid detergents recommended for colors can be used at dosages recommended for heavily soiled clothes.

It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Use detergents without bleach.

Powder and liquid detergents recommended for whites can be used at dosages recommended for normally soiled clothes.

Powder and liquid detergents recommended for whites can be used at dosages recommended for lightly soiled clothes.

Liquid detergents suitable for colors and dark colors can be used at dosages recommended for heavily soiled clothes.

Prefer liquid detergents produced for delicate clothes.

Woolen and silk clothes must be washed with special woolen detergents.

Powder and liquid detergents recommended for colors can be used at dosages recommended for normally soiled clothes. Detergents which do not contain bleach should be used.

Liquid detergents suitable for colors and dark colors can be used at dosages recommended for normally soiled clothes.

Powder and liquid detergents recommended for colors can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain bleach should be used.

Liquid detergents suitable for colors and dark colors can be used at dosages recommended for lightly soiled clothes.






4.6 Operating the product

4.6.1 Control panel

17 18 19 20 21

22

23

26

17 - Programme selection knob

18 - Spin speed adjustment button

19 - Temperature adjustment button

20 - Display

21 - Program follow-up indicator

26 - Programme selection indicator lights

4.6.2 Display symbols a b c d e f g

88

0 C

1888

88:88

25 24

22 - On / Off button

23 - Start / Pause button

24 - End time setting button

25 - Auxiliary function buttons h m l k j i a - Temperature indicator b - Electrical connection c - Steam indicator d - Audio Warning indicator e - No Water indicator f - Detergent indicator g - Start / Pause indicator h - Program Follow-up indicator i - End Time indicator j - Duration information line k - Auxiliary function indicators l - Child lock indicator / Loading door lock symbol m - Spin Speed indicator

22 / EN

C

Figures in this section are schematic and may not match the product exactly.


4.6.3 Programme and consumption table

EN 2 Auxiliary functions

Programme

Selectable temperature range

°C

Coton

Coton Eco

BabyProtect+

Synthétique

Express

Chemises

Soie

Super Rinçage

Laine

Couette

Soin Vapeur

Express 14‘

Lavage Main

70

85

38

70

94

80

80

65

65

65

82

70

95

95

95

58

21

75

40

40

30

30

90

60

40

90

60

30

60

40

90

60

40

40** 5.5

10

10

10

10

40 2.5

10

5

5

10

10

10

4

2.5

-

5

2

2.5

2.70

1600 • • • • • • • •

1.75

1600 • • • • • • • •

1.00

1600 • • • • • • • •

0.82

1600

2.70

1600 *

1.04

1200 • • • • • • • •

0.80

1200 • • • • • • • •

2.20

1400

1.06

1400

0.28

1400

•

•

•

•

•

• •

•

•

1.40

800 • • • * • • • •

0.41

600 *

0.04

1600

1.25

600

• • •

0.75

1000 •

0.80

1000

0.07

1400

0.41

600

•

•

• • *

•

•

•

•

•

•

•

•

•

• : Selectable.

* : Automatically selected, no canceling.

** : Energy Label programme (AS/NZS 2040)

*** : If maximum spin speed of the product is lower then this value, you can only select up to the maximum spin speed.

**** : Programme detects the type and quantity of the laundry to automatically adjust water and energy consumption and programme time.

- : See the programme description for maximum load.

C

The auxiliary functions in the table may vary according to the model of your product.

Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.

You can see the washing time of the programme you have selected on the display of the product. It is normal that small differences may occur between the time shown on the display and the real washing time.

Auxiliary function selection modes can be changed by the manufacturing company. Existing selection modes can be removed or new selection modes can be added.

The manufacturer reserves the right to make modifications in the programmes and auxiliary functions given in the table. While these modifications will not change the product performance, programme steps and durations can be changed."

90-Cold

90-Cold

90-Cold

60-Cold

90-30

60-Cold

60-Cold

90-Cold

90-Cold

90-Cold

60-Cold

40-Cold

-

40-Cold

60-Cold

40-Cold

30-Cold

30-Cold


4.6.4 Programme selection

1 Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with the "Programme and consumption table".

C Programmes are limited with the highest spin speed appropriate for that particular type of fabric.

When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature.

Always select the relevant lowest required temperature. Higher temperature means higher power consumption.

2. Select the desired programme with the Programme Selection knob.

88

0 C

1888

88:88

4.6.5 Programmes

• Cottons

Use for your cotton and durable laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.).

Your laundry is washed with intensive wash movement. Energy and water consumption is higher than the Cottons Eco program, but washing duration is shorter.

Following the spin step, the special movements shown in the figure with arrows will make your laundry less creased.

• Cottons Eco

Use to wash your normally soiled, durable cotton and linen laundry.

Although it washes longer than all other programmes, it provides high energy and water savings.

To increase the washing performance the special washing actions shown in the figure with arrows are used.

• Anti Allergy

Use this programme for laundry of the allergic individuals and laundry that require hygienic washing (baby clothes, sheet, bedding, underwear, etc.). Longer heating time and an additional rinsing step provide a higher level of hygiene.

• BabyProtect+60°C programme is tested and approved by “The British Allergy

Foundation” (Allergy UK) in United Kingdom.


Allergy UK is the operational name of The British Allergy Foundation. The Seal of Approval endorsement, which indicates that the product bearing it specifically restricts / reduces / removes allergens from the environment of the allergy sufferer or has significantly reduced allergen content, was created in order to provide guidance for people seeking advice in this issue. It is aimed to assure poeple that products had been scientifically tested or reviewed with measurable results.

• Synthetics

Use to wash your synthetic and less durable clothes (shirts, blouses, synthetic/cotton blends, etc.).

If your machine does not have a curtain programme, for curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing functions selected. As their meshed texture causes excessive foaming, wash the veils/tulle by putting little amount of detergent into the main wash compartment. Do not put detergent in the prewash compartment.

The special washing actions shown in the figure with arrows are used to make your laundry less creased and washed better.

• Daily Quick

Use to wash your lightly soiled and unstained cotton laundry in a short time.

• Shirts

Use to wash the shirts made of cotton, synthetic and synthetic blended fabrics together.

• Silk Care

Use this programme to wash delicate silks. Makes a sensitive wash using the special washing actions shown in the figure.

Protects your laundry reducing wear and discoloration.

• Spin+Drain

Use to drain the water in the product.

• Super Rinse

Use when you want to rinse or starch separately. The special rinse movements shown in the figure with arrows make your laundry rinsed with much more water.


26 / EN

• Wool Care

Use this programme to wash your machine-washable woolen laundry. Select the appropriate temperature complying with the tags of your clothes. Use appropriate detergents for woolens.

Makes a very sensitive wash using the special washing actions shown in the figure.

“The wool wash cycle of this machine has been approved by

The Woolmark Company for the washing of wool garments labelled as «hand wash» provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine. Follow the garment care label for drying and other laundry instructions. “In UK, Eire, Hong Kong and India the

Woolmark trade mark is a Certification trade mark.” M0000

• Duvet

Use this programme to wash your fiber duvets that bear "machine washable" tag. Make sure that you have loaded the duvet correctly in order not to damage the machine and the duvet. Remove the duvet cover before loading the duvet into the machine. Fold the duvet into two and load it into the machine. Load the duvet into the machine paying attention to place it in a way that it will not contact the bellow.

C

Do not load more than 1 double fiber duvet (200 x 200 cm).

Do not wash your duvets, pillows and etc. that contain cotton in the machine.

CAUTION: Do not wash the items apart from duvets such as carpets, rugs and etc. in the machine.

Permanent damage occurs in the machine.

• Dark Care

Use this programme to wash your dark colored laundry or colored laundry that you do not want them get faded. Washing is performed with little mechanic action and at low temperatures. It is recommended to use liquid detergent or woolen shampoo for dark coloured laundry.

• Super Short

Use to wash your lightly soiled and unstained cotton laundry in a short time.

• Hand Wash

Use to wash your delicate clothes that bear “not machinewashable” tags and for which hand wash is recommended. It washes laundry with a very gentle washing action as shown with arrows in the figure to not to damage clothes.


• SteamTherapy

To soften the soiling, it pre-treats the laundry by giving steam.

C

Load only half of the capacity stated for the selected programme.

When this auxiliary function is selected, it is normal to hear boiling noises since the steam generator boils water to produce steam.

• WaterProofCare

Use this programme to wash laundry having finishing protection.

With its special washing action that rotates with high speed as shown with arrows in the figure, it washes the sportswear or outdoor garments that have a chemical finishing making them spot-proof, rain-proof, water repellent, anti-creasing and etc., by protecting the said finishing. Use special outdoor detergents or liquid detergents.

4.6.6 Temperature selection

Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator. The recommended temperature may not be the maximum temperature that can be set for the selected programme.

88

0 C

1888

88:88

Press the Temperature Adjustment button to change the temperature. Temperature will decrease by increments of 10 °C.

Finally, “-” symbol indicating the cold wash option appears on the display.

0 C

1888

88:88

C

No change can be made in programmes where temperature adjustment is not allowed.

If the programme step allows, you can change temperature after the washing starts.

C

If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme appears on the display. Press the Temperature

Adjustment button again to decrease the temperature.


4.6.7 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator.

C

It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current programme.

88

0

C

1888

88:88

Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.

Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.

C

Spin speed adjustment button only decreases spin speed. It does not increase spin speed.

Rinse Hold option is indicated with “ı_ı” symbol and No Spin option is indicated with “_” symbol.

If you are not going to unload your clothes immediately after the programme completes, you can use Rinse Hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the product.

88

0

C

88:88

If you want to spin your laundry after the Rinse Hold function:

- Adjust the Spin Speed.

- Press the Start / Pause button. The programme resumes. It performs spinning by draining the water.

88

0 C

88:88

If you want to discharge the water at the end of the programme without spinning, use No

Spin function.

C

No change can be made in programmes where spin speed adjustment is not allowed.

If the programme step allows, you can change spin speed after the washing starts.


4.6.8 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, frames of the auxiliary function symbol that can be selected together with it illuminates. And when you select an auxiliary function, the interior area of the auxiliary function symbol also starts to illuminate.

88

0

C

1888

88:88

C

Frame of the auxiliary function symbol that cannot be selected with the current programme does not illuminate.

Also the frames of the auxiliary function suitable for the current programme after the washing has started remains illuminated. You can select or cancel the auxiliary functions whose frames are illuminated. If the wash cycle has reached a point where you cannot select the auxiliary function, the function's frame turns off.

C Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the product, the function selected first will be canceled and the second auxiliary function selection will remain active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be canceled and Quick Wash will remain active.

An auxiliary function that is not compatible with the programme cannot be selected. (See, "4.6.3

Programme and consumption table")

Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The frame of the auxiliary function will not be illuminated, only inner area will be illuminated.

• Prewash

A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.

• Extra Rinse

This function enables the product to make another rinsing in addition to the one already made after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent remnants on the laundry can be reduced.

• Quicker Wash

This function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the number of rinsing steps for lightly soiled laundry.

C

When you select this function, load your product with half of the maximum laundry specified in the programme table.


• Rinse Hold

If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the product. Press Start/

Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start /

Pause button.

The programme resumes. Water is drained, laundry is spun and the programme is completed.

• Night Mode

Use to wash the cottons with lesser energy consumption and silently. Spin steps are cancelled for a silent washing and the cycle ends with the Rinse Hold step. After completion of the programme, run Spin cycle to spin the laundry.

Time display

Remaining time for the completion of the programme while it is running is displayed as

“01:30” in hours and minutes format.

C

4.6.9 End Time

Programme time may differ from the values in the "Programme and consumption table" depending on the water pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage.

With the End Time function, the startup of the programme may be delayed up to 24 hours.

After pressing End Time button, the programme's estimated ending time is displayed.If the

End Time is adjusted, End Time indicator is illuminated.

88

0 C

1888

88:88

1 Open the loading door, place the laundry and put detergent, etc.

2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.

3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.

4 Press Start / Pause button. Time countdown starts. “:” sign in the middle of the end time on the display starts flashing.

88

0 C

1888

88:88


If you want to cancel End Time function, press On / Off button to turn off and on the product.

C Additional laundry may be loaded to the product during the End Time countdown period. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected programme appears on the display.

When the End Time selection is completed, the time appears on the screen is the total of the end time chosen with the duration of the selected programme.

Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.

4.6.10 Starting the programme

1 Press Start / Pause button to start the programme.

2 The Start / Pause button which was off before starts to illuminate steadily now, indicating that the programme has started.

88 0 C

1888

88:88

3 Loading door is locked. After it is locked, loading door lock symbol will be displayed.

88

0 C

1888

88:88

4 Programme follow-up indicator lights on the display will show the current programme step.

4.6.11 Loading door lock

There is a locking system on the loading door of the product that prevents opening of the door in cases when the water level is unsuitable.

After it is locked, loading door lock symbol will be displayed.

4.6.12 Changing the selections after programme has started

To change your settings after the program has started, you have to switch the machine to

Pause mode first.

Switching the product to pause mode:

Press the Start / Pause button to switch the machine to pause mode while a programme is running. Pause symbol starts to flash.

88

0 C

1888

88:88


32 / EN

Adding laundry after the programme has started:

1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the Loading Door and add or take out the laundry.

4. Close the Loading Door.

5. Make changes in auxiliary functions, temperature and speed settings if necessary.

6. Press Start / Pause button to start the machine.

88

0

C

1888

88:88

C

If the water level in the machine is not suitable when you press Start / Pause button, the loading door lock symbol remain lit on the display. To open the loading door, first pause the machine and drain the water inside.

88

0

C

1888

88:88

Changing the programme selection after programme has started:

The programme change is not allowed when the current programme is running.

You can select the new programme after switching the current programme to pause mode.

C

The selected program starts anew.

Changing the auxiliary function, speed and temperature

Depending on the step the programme has reached, you can cancel or activate the auxiliary functions. See "4.6.8 Auxiliary function selection".

Also you can change temperature and cycle adjustments. See "4.6.6 Temperature selection" and "4.6.7 Spin speed selection".

C

The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.


4.6.13 Child Lock

Use Child Lock function to prevent children from tampering with the product. Thus you can avoid any changes in a running programme.

C

You can switch on and off the product with On / Off button when the Child Lock is active. When you switch on the product again, programme will resume from where it has stopped.

Machine will give an audio alarm when the buttons are pressed if the child lock is active. The audio warning will repeat for maximum 5 times. If the buttons are pressed more than 5 times, no audio warning will be given.

To activate the Child Lock:

Press and hold 2nd auxiliary function button for 3 seconds. After the countdown as “CL

3-2-1” on the display is over, child lock indicator will be lit. After the indicator is lit, stop pressing 2nd Auxiliary Function button.

To deactivate the childproof lock:

Press and hold 2nd auxiliary function button for 3 seconds. After the countdown as “CL

3-2-1” on the display is over, child lock indicator disappears from the display.

4.6.14 Cancelling the programme

The programme is cancelled when the product is turned off and on again. Press and hold

On / Off button for 3 seconds. After the countdown as "3-2-1" on the display is over, the machine turns off.

C If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the Child Lock first.

If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the product is above the loading door opening, then turn the Programme Selection knob to Pump+Spin programme and discharge the water in the product.

4.6.15 End of programme

End symbol appears on the display when the programme is completed.

If you do not press any button for 10 minutes, the product will turn off automatically.

Display and all indicators will turn off.

Completed programme steps will be displayed if you press On / Off button.

4.6.16 Adjusting the VOLUME level

Low volume and high volume

Press and hold Auxiliary Function button 3 for 3 seconds to adjust the volume level. After the countdown as "3-2-1" on the display is over, the volume level symbol will appear and the new volume level will be displayed.


4.7 Maintenance and cleaning

Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.

4.7.1 Cleaning the detergent drawer

Clean the detergent drawer at regular intervals (every

4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time.

Lift the rear part of the siphon to remove it as illustrated.

If more than normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned.

1 Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine.

2. Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin. In order to prevent the residues to contact your skin, clean it with an appropriate brush by wearing a pair of gloves.

3 Insert the drawer back into its place after cleaning and make sure that it is seated well.

4.7.2 Cleaning the loading door and the drum

Residues of softener, detergent and dirt may accumulate in your machine in time and may cause unpleasant odours and washing complaints. To avoid this, use the Drum

Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Run the programme without any laundry in the machine. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. "2"). If the anti-limescale is in tablet form, put only one tablet into compartment nr. 2. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

C

Repeat Drum Cleaning process in every 2 months.

Use an anti-limescale suitable for the washing machines.

After every washing make sure that no foreign substance is left in the drum.

If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.

Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel.

Never use steel wool or wire wool. These will damage the painted, chromated and plastic surfaces.


4.7.3 Cleaning the body and control panel

Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth.

Use only a soft and damp cloth to clean the control panel.

4.7.4 Cleaning the water intake filters

There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine. Filters should be cleaned as they do get dirty.

1. Close the taps.

2. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, remove them from their places with a pliers and clean in this way.

3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water.

4. Replace the seals and filters carefully and tighten their nuts by hand.

4.7.5 Draining remaining water and cleaning the pump filter

The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend.

If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter.

In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing of the water, water may have to be drained completely.

A CAUTION:

Foreign substances left in the pump filter may damage your machine or may cause noise problem.

CAUTION:

If the product is not being used, shut the tap shut, remove mains pipe and drain the water inside the machine against any likely freezing.

CAUTION:

After each use, turn off the water tap to which the mains hose is connected.

In order to clean the dirty filter and discharge the water:

1 Unplug the machine to cut off the supply power.

A

CAUTION:

Temperature of the water inside the machine may rise up to 90 ºC. To avoid the burning risk, clean the filter after the water inside the machine is cooled down.


2. Open the filter cover.

3 Follow the below procedures in order to drain water.

If the product has an emergency water draining hose, in order to drain the water: a Pull the emergency draining hose out from its seat b Place a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose. When the container is full, block the inlet of the hose by replacing the plug. After the container is emptied, repeat the above procedure to drain the water in the machine completely.

c When draining of water is finished, close the end by the plug again and fix the hose in its place.

d Turn and remove the pump filter.

If the product does not have an emergency water drain hose, in order to drain the water: a. In order to collect the water to flow out of the filter, place a large vessel in front of the filter.

b. Turn and loosen the pump filter until water starts to flow (counterclockwise).

Fill the flowing water into the container you have placed in front of the filter.

Always keep a piece of cloth handy to absorb any spilled water.

c When the water inside the machine is finished, take out the filter completely by turning it.

4 Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.

5. Replace the filter.

6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close.


5

Troubleshooting

Problem

Programme cannot be started or selected.

Water in the machine.

Machine does not fill with water.

Reason

Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.).

Some water might have remained in the product due to the quality control processes in the production.

Tap is turned off.

Water inlet hose is bent.

Solution

To cancel the programme, turn the

Programme Selection knob to select another programme. Previous programme will be canceled. (See “Cancelling the programme”)

This is not a failure; water is not harmful to the machine.

Turn on the taps.

Flatten the hose.

Machine does not drain water.

Machine vibrates or makes noise.

Water inlet filter is clogged.

Loading door may be open.

Clean the filter.

Close the door.

Water drain hose might be clogged or twisted.

Clean or flatten the hose.

Pump filter is clogged.

Machine might be standing unbalanced.

Clean the pump filter.

Adjust the feet to level the machine.

A hard substance might have entered into the pump filter.

Transportation safety bolts are not removed.

Laundry quantity in the machine might be too little.

Machine might be overloaded with laundry.


Remove the transportation safety bolts.

Add more laundry to the machine.

Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine.

Machine might be leaning on a rigid item.

Make sure that the machine is not leaning on anything.

Water drain hose might be clogged or twisted.

Clean or flatten the hose.



There is water leaking from the bottom of the washing machine.

Machine stopped shortly after the programme started.

Machine directly discharges the water it takes in.

No water can be seen in the machine during washing.

Loading door cannot be opened.

Machine might have stopped temporarily due to low voltage.

Draining hose might not be at adequate height.

The water level is not visible from outside of the washing machine.

Door lock is activated because of the water level in the machine.

Machine is heating up the water or it is at the spinning cycle.

Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an end.

It will resume running when the voltage restores to the normal level.

Connect the water draining hose as described in the operation manual.

This is not a failure.

Drain the water by running the Pump or

Spin programme.

Wait until the programme completes.

Wait for a couple of minutes for deactivation of the door lock.


Problem

Washing takes longer time than specified in the manual.(*)

Reason

Water pressure is low.

Voltage might be low.

Input temperature of water might be low.

Number of rinses and/or amount of rinse water might have increased.

Solution

Machine waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.

Washing time is prolonged to avoid poor washing results when the supply voltage is low.

Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.

Machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary.

Programme time does not countdown. (On models with display) (*)

Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage.

Timer may stop during water intake.

Programme time does not countdown. (*)

Timer may stop during heating step.

Timer may stop during spinning step.

There might be unbalanced load in the machine.

Use recommended amount of detergent.

Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

Timer indicator will not countdown until the machine reaches the selected temperature.

Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.



Problem

Machine does not switch to spinning step. (*)

Washing performance is poor: Laundry turns gray.

(**)

Washing performance is poor: Stains persist or the laundry is not whitened.

(**)

Washing performance is poor: Oily stains appeared on the laundry. (**)

Washing performance is poor: Clothes smell unpleasantly. (**)

Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes.

Colour of the clothes faded. (**)

Reason

There might be unbalanced load in the machine.

Solution


The machine will not spin if water is not drained completely.


Insufficient amount of detergent has been used over a long period of time.

Check the filter and the draining hose.


Use the recommended amount of detergent appropriate for water hardness and the laundry.

Washing was made at low temperatures for a long time.

Insufficient amount of detergent is used with hard water.

Select the proper temperature for the laundry to be washed.

Using insufficient amount of detergent with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the laundry.

Too much detergent is used.

Insufficient amount of detergent is used.

Excessive laundry was loaded in.



Do not load the machine in excess.

Load with amounts recommended in the

"Programme and consumption table".

Wrong programme and temperature were selected.

Wrong type of detergent is used.


Regular drum cleaning is not applied.

Select the proper programme and temperature for the laundry to be washed.

Use original detergent appropriate for the machine.

Put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.

Clean the drum regularly. For this, please see 4.7.2.

Excessive laundry was loaded in.

Detergent in use is damp.

A higher temperature is selected.

Leave the detergent drawer as well as the loading door of the machine ajar after each washing. Thus, a humid environment favorable for bacteria cannot occur in the machine.

Do not load the machine in excess.

Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.

Select the proper programme and temperature according to the type and soiling degree of the laundry.


Problem

It does not rinse well.

Laundry became stiff after washing. (**)

Laundry does not smell like the softener. (**)

Reason

The amount, brand and storage conditions of the detergent used are inappropriate.

Detergent is put in the wrong compartment.


Drain hose is folded.

Insufficient amount of detergent is used.


Detergent might be mixed with the softener.



Solution

Use a detergent appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.

If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment.

Check the filter.

Check the drain hose.

Using insufficient amount of detergent for the water hardness can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness.

If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment.

Do not mix the softener with detergent.

Wash and clean the dispenser with hot water.

If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step.

Wash and clean the dispenser with hot water. Put the detergent in the correct compartment.




Problem

Detergent residue in the detergent drawer. (**)

Too much foam forms in the machine. (**)

Foam is overflowing from the detergent drawer.

Laundry remains wet at the end of the programme. (*)

Reason

Detergent is put in wet drawer.

Detergent has gotten damp.

Solution

Dry the detergent drawer before putting in detergent.

Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.

Water pressure is low.

The detergent in the main wash compartment got wet while taking in the prewash water.

Holes of the detergent compartment are blocked.

There is a problem with the detergent drawer valves.


Check the water pressure.

Check the holes and clean if they are clogged.

Call the Authorized Service Agent.



Regular drum cleaning is not applied.

Improper detergents for the washing machine are being used.

Excessive amount of detergent is used.

Detergent was stored under improper conditions.

Some meshed laundry such as tulle may foam too much because of their texture.


Softener is being taken early.


Clean the drum regularly. For this, please see 4.7.2.

Use detergents appropriate for the washing machine.

Use only sufficient amount of detergent.

Store detergent in a closed and dry location. Do not store in excessively hot places.

Use smaller amounts of detergent for this type of item.

Put the detergent in the correct compartment.

There may be problem in the valves or in the detergent dispenser. Call the

Authorized Service Agent.

Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer.

Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.



(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2

A

CAUTION:

If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.




www.beko.com

Beko WMY 1048 LB1 Washer User manual

Washing Machine

User’s Manual

Please read this user manual first!

General safety instructions

1.1 Life and property safety

1.2 Children's safety

1.3 Electrical safety

1.4 Hot surface safety

Important instructions for environment

2.1 Compliance with WEEE Directive

2.2 Package information

Intended use

Your washing machine

4.1 Overview

4.2 Package Contents

4.3 Technical specifications

4.4 Installation

4.5 Preparation

4.6 Operating the product

4.7 Maintenance and cleaning

Troubleshooting

Key Features

Related manuals

Frequently Answers and Questions

What is the capacity of the Beko WMY 1048 LB1 washing machine?

What types of wash programs does the Beko WMY 1048 LB1 washing machine have?

Does the Beko WMY 1048 LB1 washing machine have any energy-saving features?

Table of contents

Beko WMY 1048 LB1 Washer User manual

Washing Machine

User’s Manual

Please read this user manual first!

General safety instructions

1.1 Life and property safety

1.2 Children's safety

1.3 Electrical safety

1.4 Hot surface safety

Important instructions for environment

2.1 Compliance with WEEE Directive

2.2 Package information

Intended use

Your washing machine

4.1 Overview

4.2 Package Contents

4.3 Technical specifications

4.4 Installation

4.5 Preparation

4.6 Operating the product

4.7 Maintenance and cleaning

Troubleshooting

Key Features

Related manuals

Beko

WMY1048LB1

Euromaid

WM7PRO

Smeg

SAWS1014

Beko

BFL1010W

Altus

AFL710W

Beko

Washer 914834

Euromaid

WM5PRO

Frequently Answers and Questions

What is the capacity of the Beko WMY 1048 LB1 washing machine?

What types of wash programs does the Beko WMY 1048 LB1 washing machine have?

Does the Beko WMY 1048 LB1 washing machine have any energy-saving features?

Table of contents