advertisement
▼
Scroll to page 2
of 8
PT-DZ13K Series 3-Chip DLP™ Projectors PT- DZ13K PT- DS12K PT- DW11K PT- DZ10K The New Era of Professional Visual Imaging Higher Brightness, Picture Quality and Reliability—All in a Compact Body The Panasonic PT-DZ13K Series of 3-chip DLP™ projectors combine high levels of picture quality, reliability, function and system expandability into a compact body. Packed with original, advanced Panasonic technology, these projectors supply the flexibility to meet a wide range of applications. PT-DZ13K Series It combines with either a separate, external 100/120/144 Hz drive with IR emitter and active shutter glasses, or an active filter and passive glasses, for viewing 3D images. High Brightness and Picture Quality Waveform Monitor Function Compact Yet Bright Panasonic’s original dual-lamp system* 1, with its new 380 W* 2 lamp, helps to make the body compact, while providing a full 12,000 lm* 3 of brightness with 120 VAC operation. The replacement lamp unit (ET-LAD310A/ET-LAD310AW) can be used with all of the PT-DZ8700/PT-DZ110X Series*4 projectors. This reduces the number of lamp types that need to be kept in stock when multiple projectors are used. Without Detail Clarity Processor 3 When the output level of the source device fluctuates due to the performance of the device or its cable connections, the original black and white levels of the image content cannot be reproduced correctly. With the PT-DZ13K Series projector you can view the waveforms on the screen and adjust the settings either automatically or manually as you prefer. White Level Adjustment Full-HD Ready WUXGA Resolution The PT-DZ13K/DZ10K features native WUXGA resolution for full-HD viewing. This brings you lifelike projection of intricate, highly detailed images. Dynamic Iris for a High 10,000:1 * 5 Contrast Ratio Panasonic’s Dynamic Iris uses a scenelinking aperture mechanism to achieve a remarkable 10,000:1* 5 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures. Before After PT-DZ13K Series with Detail Clarity Processor 3 System Daylight View 2 for Enhanced Color Perception This unique Panasonic technology optimizes image quality to improve the color perception of the projected image in bright rooms. With a brightness of 12,000 lm* 2, it provides highly comfortable viewing even in bright lighting, and allows viewers to concentrate easily on the images. Black Level Adjustment Before After Rec. 709 Mode for HDTV Projection Detail Clarity Processor 3 Gives Natural Clarity to Even the Finest Details This unique Panasonic circuit optimizes the sharpness of each image, based on the superhigh-, high-, medium-, and lowfrequency components of the extracted image information. The resulting images have more natural, lifelike expression. Without System Daylight View 2 PT-DZ13K Series with System Daylight View 2 DICOM Simulation Mode * 6 This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity. PT-DZ13K WUXGA 12,000 lm PT-DS12K SXGA + 12,000 lm Normal mode PT-DW11K WXGA 11,000 lm Active 3D Projection Capability 10,600 lm The series is compatible with both passive and active 3D projection systems. PT-DZ10K WUXGA DICOM simulation mode (PT-DZ13K/DS12K/DW11K) Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected. Advanced Technologies for Excellent Image Quality • • • • • • • • • • 3D color management system Full 10-bit image processing Progressive cinema scan (3:2 pulldown) Dynamic sharpness control Digital noise reduction IP conversion AI scene control 2:2 pulldown mode sRGB compatibility Fine-adjustable color temperature *1 If the projector is to be operated continuously 24 hours a day / 7 days a week, use the dual-lamp optical system’s alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours a day / 7 days a week in dual-lamp mode. Allow a minimum of two hours per week of non-operation time per lamp if using the dual-lamp mode. *2 For the PT-DZ13K/DS12K/DW11K. 355 W lamp for the PT-DZ10K. *3 The PT-DW11K has 11,000 lm of brightness and PT-DZ10K has 10,600 lm brightness. *4 PT-DZ8700/DS8500/DW8300/DZ110X/ DS100X/DW90X. *5 Full on/off, with dynamic iris set to “3”. *6 This product is not a medical instrument. Do not use it for actual medical diagnosis. Reliability and Stability Panasonic’s Original Dual Lamp System This system eliminates the interruption if a lamp should fail (in dual-lamp operation mode). The Lamp Relay mode also operates the lamps alternately to enable 24/7 projection. Eco Filter that Needs No Maintenance for up to 12,000 Hours * 7 The Eco Filter has an electrostatic Micro Cut Filter that collects minute dust particles with an ion effect. It combines with the dust-resistant cabinet to enable long-term use even under harsh conditions. Its maintenance cycle of up to 12,000 hours reduces hassle, and the environmental design lets you wash the filter with water and reuse it.* 8 Low TCO and an Environmentally Friendly Design The PT-DZ13K Series projectors lower the total cost of ownership because they have a lamp replacement cycle of up to 2,500 hours.* 9 Their environmentally friendly design also includes a low power consumption of 1,000 W. Easy Lamp Replacement For easier maintenance, you can replace the lamp from the rear. This makes it easy to replace a lamp unit while the projector is still in the mounting bracket or dual stacked. Optional Smoke Cut Filter ET-SFD320 The projector can be equipped with an optional, extra-strong air filter to prevent the entry of smoke, such as those used for special effects at events and stage performances. System Integration Flexibility Flexible Installation The wide adjustment range of the powered horizontal/vertical lens shift function can be easily adjusted with the remote control. The unit can also be rotated 360° vertically, to accommodate various installation conditions. The lens-centered design 360° contributes to easy installation. The LAN terminal allows a computer connected to the network to use Crestron RoomView™ application software to manage and control system devices. Besides, The AMX Device Discovery technology is built in the PT-DZ13K Series projector. Optional Upgrade Kit Featuring Geometry Manager Pro (PT-DZ13K/DS12K) The new Geometry Manager Pro software included in the optional upgrade kit supports Color Matching, Edge Blending, uniformity correction, and other useful functions for multiprojector setups (max. 32 units). It also allows creative masking using four lines or bitmap data. And its flexible and complex geometric adjustment capability suits a wide variety of screen shapes. Lens Memory * 10 The settings of projection size, lens shift position, and focus/zoom can be stored in memory and recalled for instant switching. Create masking data... 750 inches Line masking 1000 inches Use it to overlap the projection image... A Wide Selection of Lenses (optional) Choose from a wide lineup of lenses for your system, including short-throw, longthrow zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease. New Geometric Adjustment *11 for Specially Shaped Screens ( PT-DZ13K/DS12K ) This function adjusts the image for projection onto spherical, cylindrical and other specially shaped screens. You can make the adjustment easily using only the remote control, with no external equipment needed. Bitmap masking: Detaild masking is also possible. Up to three of masking data can be stored. And the image is projected only in the designated areas. Multi-Unit Brightness Control This function automatically corrects the brightness fluctuations that occur over time in the individual projectors of a multi-screen system. Up to eight projectors can be controlled by connecting to each other via a hub, and this can be increased to a maximum of 2,048 projectors by using “Multi Projector Monitoring & Control Software Ver. 2.8.” Conventional Projector Multi-Unit Brightness Control “ON” At the time when the projectors are installed (A) At the time when the projectors are installed (A’) Flexible calibration lets you project onto curved surfaces. Each corner can be independently adjusted, and up to three sets of adjusted data can be stored. Keep aspect on. Smoke Cut Filter ET-SFD320 Crestron RoomView™ and AMX Device Discovery Projector 1 Projector 2 After a certain time has passed (B) Projector 1 Projector 2 After a certain time has passed (B’) Keep aspect off. Brightness Brightness You can keep the aspect on when correcting curves. To make effective use of the screen area, you can also turn the aspect-keeping function off. Image from the projector 1 Image from the projector 2 (A) (B) Brightness fluctuations occur. Time Preset brightness (A´) Images from the projector 1 and 2 (B´) Time PT-DZ13K Series Multi-Screen Support System Seamlessly Connects Multiple Screens • Edge Blending The edges of adjacent screens can be blended and their luminance controlled. • Color Matching This function corrects for slight variations in the color reproduction range of individual projectors. The PC software assures easy, accurate control. • Multi-Screen Processor The PT-DZ13K Series can project large, multiscreen images without any additional equipment. Up to 100 units can be edgeblended at a time. Color matching Web Browser Control The PT-DZ13K Series can be easily operated remotely over a LAN network, because it is all done using the computer’s familiar web browser. Furthermore, the projector sends age to notify ot y tthe e ope ato an e-mail message operator as occurred, or a lamp when an error has laced needs to be replaced. PT-DZ13K Series remote control LAN PC e-mail PC The PT-DZ13K Series projector are carefully manufactured at the Panasonic factory in Japan, under strict quality control. This is another, very important advantage of a Panasonic projector. E Ecology-conscious Design • No halogenated flame retardants are used in the cabinet. • Lead-free solder is used to mount components t the printed circuit boards. to •S Stand-by power consumption of only 0.3 W (0.2 W f 120 V AC).* 16 for •A Auto Power Save activates standby mode when n signal is input. no *7 Edge blending Internet PC *8 LAN PC Source PT-DZ13K Series Without edge blending With edge blending Overlapping image edges Other her Valuable Features • • • • • • • • • • • Portrait Mode Capability (optional) * 12 Portrait projection is possible by mounting the optional ET-LAD320P or ET-LAD320PW lamp units, updating the projector’s firmware to MAIN Ver. 2.00 or later, and installing the projector with its terminal side surface facing downward. Multiple Terminals with HD-SDI Compatibility The PT-DZ13K Series has an array of terminals, including two SDI (Dual Link HD-SDI, 3G SDI and HD SDI),* 13 3D sync* 14, DVI-D and HDMI terminals. Multi Projector Monitoring & Control Software Ver. 2.8 Panasonic’s original Multi Projector Monitoring & Control Software Ver. 2.8 freeware lets you control and monitor multiple projectors at the same time over a wired LAN. If a problem occurs, an alarm message is sent to the monitoring/ controlling PC. PC e-mail • PJLink™ compatibility P-in-P function* 15 Mechanical lens shutter with fade in/out effect Scheduling function Direct power off 30 m long-range wireless remote control with LED backlight Anti-theft features with chain opening Control device setup function ID assignment for up to 64 units Built-in test pattern Selectable 10-language on-screen menu (English, German, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Korean) RoHS Directive compliant *9 *10 *11 *12 *13 *14 *15 *16 The usage environment affects the filter maintenance cycle. When washing with water, please follow the procedures listed in the operating instructions. Also, we recommend replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one. With the LAMP POWER set to HIGH mode. 3,500 hours for the PT-DZ10K. With the LAMP POWER set to NORMAL mode. The usage environment affects the lamp replacement cycle. The settings stored in memory and the projection condition after recall may not match perfectly. For the PT-DZ13K/DS12K only. The PT-DZ10K has the same Geometric Adjustment function that is featured on the previous models. The PT-DW11K features neither of them. Please contact the sales representative with regard to the frame for portrait orientation. Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 degrees. Also, the lamp replacement cycle becomes 500 hours, and this cycle is affected by the usage environment. In Portrait mode, the maximum brightness becomes 10,600 lm for the PT-DZ13K/DS12K and 9,600 lm for the PT-DW11K. For the PT-DZ13K and PT-DS12K only. The PT-DZ10K has one SDI connector and does not accept dual-link HD SDI signals. Not featured on the PT-DZ10K. This function cannot be used with some input signals and selected inputs. With the standby mode set to ECO. Specifications Model PT-DZ13K Power supply 120 V, 220 –240 V AC, 50/60 Hz Power consumption 120 V AC 220–240 V AC PT-DS12K PT-DW11K PT-DZ10K 1,000 W (1,030 VA) 980 W (1,010 VA) (0.2 W with standby mode set to eco.* 1 6 W with standby mode set to normal. Both with fan stopped.) 950 W (980 VA) 970 W (1,020 VA) 925 W (1,010 VA) 900 W (980 VA) (0.3 W with standby mode set to eco.* 1 9 W with standby mode set to normal. Both with fan stopped.) DLP™ chip Panel size Display method Pixels 120 V: max. 3,413 BTU/hour (without light 24.4 mm (0.96 in) diagonal (16:10 aspect ratio) DLP™ chip × 3, DLP™ projection system 2,304,000 (1,920 × 1,200) × 3, total of 6,912,000 pixels output: 3,249 BT U/hour). 220 –240 V: max. 24.1 mm (0.95 in) diagonal (4:3 aspect ratio) DLP™ chip × 3, DLP™ projection system 1,470,000 (1,400 × 1,050) × 3, total of 4,410,000 pixels Lens Lamp Optional powered zoom/focus and fixed-focus lenses 380 W UHM lamps ( HIGH mode) × 2 Screen size (diagonal) Brightness* 2 1.78 –25.4 m ( 70 – 1,000 in), 1.78 –15.24 m ( 70 – 600 in) with the E T-D75LE8, 16:10 aspect ratio 12,000 lm* 3 (dual-lamp) Center-to-corner uniformity* 2 90 % Contrast* 2 Resolution 10,000:1 (full on/off, with DYNAMIC IRIS set 1,920 × 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 × 1,200 pixels.) Scanning frequency SDI Dual-link HD-SDI 3G-SDI HD-SDI SD-SDI HDMI/DVI-D RGB YPBPR (YCBCR) Video / Y/C Optical axis shift* 6 Vertical Horizontal Keystone correction range Keystone correction range with optional Upgrade Kit ET-UK20 Installation Terminals SDI 1 IN SDI 2 IN 3D SYNC IN/OUT 3D SYNC OUT DVI-D IN HDMI IN RGB 1 IN RGB 2 IN VIDEO IN SERIAL IN SERIAL OUT REMOTE 1 IN REMOTE 1 OUT REMOTE 2 IN LAN Cabinet materials Dimensions (W × H × D) Weight* 10 Operation noise* 2 Operating environment Applicable software Supplied accessories 1.78 –25.4 m (70– 1,000 in), 1.78 –15.24 m (70– 600 in) with the ET-D75LE8, 4:3 aspect ratio to “3”) 1,400 × 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 × 1,050 pixels.) SMPTE ST 372 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p [X´Y´Z´ 4:4:4 12-bit] 2,048 × 1,080/24p, 2,048 × 1,080/24sF SMPTE ST 424 compliant, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p [ YP BP R 4:2:2 10-bit] 1080/50p, 1080/60p, SMPTE ST 292 compliant, [ YC BC R 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p SMPTE ST 259 compliant, [ YC B C R 4:2:2 10-bit] 480i, 576i 3,311 BT U/hour (without light output: 3,147 BTU/hour) 21.6 mm (0.85 in) diagonal (16:9 aspect ratio) 24.4 mm (0.96 in) diagonal (16:10 aspect ratio) DLP™ chip × 3, DLP™ projection system DLP™ chip × 3, DLP™ projection system 1,049,088 (1,366 × 768) × 3, 2,304,000 (1,920 × 1,200) × 3, total of 3,147,264 pixels total of 6,912,000 pixels 355 W UHM lamps ( NORMAL mode) × 2 1.78 –25.4 m ( 70 – 1,000 in), 1.78 –15.24 m ( 70 – 600 in) with the E T-D75LE8, 16:9 aspect ratio 11,000 lm* 4 (dual-lamp) 1.78 –25.4 m ( 70 – 1,000 in), 1.78 –15.24 m ( 70 – 600 in) with the E T-D75LE8, 16:10 aspect ratio 10,600 lm (dual-lamp) 1,366 × 768 pixels (Input signals that exceed this resolution will be converted to 1,366 × 768 pixels.) 1,920 × 1,200 pixels – SMPTE ST 424 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p [YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, SMPTE ST 292 compliant, [YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i – – – 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p VG A (640 × 480) –WUXG A* 5 (1,920 × 1,200), compatible with non-interlaced signals only, dot clock: 25 –162 MHz f H : 15 –100 kHz, f V: 24 –120 Hz, dot clock: 20 –162 MHz f H : 15.75 kHz, f V : 60 Hz [480i (525i)] f H : 45.00 kHz, f V : 60 Hz [720 (750)/60p] f H : 28.13 kHz, f V : 50 Hz [1080 (1125)/50i] f H : 33.75 kHz, f V : 30 Hz [1080/30p] f H : 31.50 kHz, f V : 60 Hz [480p (525p)] f H : 37.50 kHz, f V : 50 Hz [720 (750)/50p] f H : 28.13 kHz, f V : 25 Hz [1080/25p] f H : 67.50 kHz, f V : 60 Hz [1080/60p] f H : 15.63 kHz, f V : 50 Hz [576i (625i)] f H : 33.75 kHz, f V : 60 Hz [1035/60i] f H : 27.00 kHz, f V : 24 Hz [1080/24p] f H : 56.25 kHz, f V : 50 Hz [1080/50p] f H : 31.25 kHz, f V : 50 Hz [576p (625p)] f H : 33.75 kHz, f V : 60 Hz [1080 (1125)/60i] f H : 27.00 kHz, f V : 48 Hz [1080/24sF] f H : 15.75 kHz, f V : 60 Hz [NTSC/NTSC4.43/PAL-M /PAL60], f H : 15.63 kHz, f V : 50 Hz [PAL /PAL-N /SECAM] ±70 % (±60 % with the E T-D75LE6) ±55 % (±44 % with the E T-D75LE6) ±55 % (±44 % with the E T-D75LE6) ±50 % (±40 % with the ET-D75LE6) from center of screen (powered) from center of screen (powered) from center of screen (powered) from center of screen (powered) ±30 % (±20 % with the E T-D75LE6) ±20 % (±15 % with the E T-D75LE6) ±20 % (±15 % with the E T-D75LE6) ±30 % (±20 % with the ET-D75LE6) from center of screen (powered) from center of screen (powered) from center of screen (powered) from center of screen (powered) 7 7 Vertical: ±40° * Vertical: ±40° * , horizontal: ±15° Vertical: ±40° * 7, horizontal: ±15° Vertical ±40° and horizontal ±40° with the E T-D75LE1/ LE2 / LE10/ LE20, vertical ±45° and horizontal ±40° with the E T-D75LE3/LE4/ LE30/LE40, vertical ±22° and horizontal ±15° with the E T-D75LE5/LE50, vertical ±28° and horizontal ±15° with the E T-D75LE6 – Ceiling/floor, front /rear, portrait* 8 BNC × 1 (3G/HD/SD-SDI) BNC × 1 ( HD/SD-SDI) BNC × 1 (3D timing signal) BNC × 1 (3D timing signal) – [SDI IN] BNC × 1 (3G/HD/SD-SDI) – DVI-D 24-pin × 1 ( DVI 1.0 compliant, compatible with HDCP, compatible with single link only) HDMI 19-pin × 1 ( Deep Color, compatible with HDCP) BNC × 5 ( RGB/ YPBPR/ YCBCR/ YC × 1) D-Sub HD 15-pin (female) × 1 ( RGB/ YP BPR/ YCBCR × 1) BNC × 1 (composite video) D-sub 9-pin (female) × 1 for external control ( RS-232C compliant) D-sub 9-pin (male) × 1 for link control M3 × 1 for wired remote control M3 × 1 for link control (for wired remote control) D-sub 9-pin (female) × 1 for external control (parallel) RJ-45 × 1 (for network connection, 10Base-T/100Base-T X, compliant with PJLink™) Molded plastic 530 × 200* 9 × 548.5 mm (20-7/8 × 7-7/8* 9 × 21-19/32 in) (optional lens not included) Approximately 24 kg (52.9 lbs) (optional lens not included) 45 dB (dual lamp operation with lamp HIGH mode), 43 dB (dual lamp operation with lamp MIDDLE mode), 37 dB (dual lamp operation with lamp ECO mode) Operating temperature: 0 – 45 °C (32 –113 °F )* 11, operating humidity: 10 – 80 % (no condensation) Logo Transfer Software, Multi Projector Monitoring & Control Software Geometry Manager Pro (included in the E T-UK 20) – 43 dB (dual lamp operation with lamp NORMAL mode), 37 dB (dual lamp operation with lamp ECO mode) Power cord with secure lock, wireless/wired remote control unit, batteries ( R6/A A type × 2) *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 In Portrait mode, the maximum brightness becomes 10,600 lm. *4 In Portrait mode, the maximum brightness becomes 9,600 lm. *5 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *6 Optical axis shift cannot be operated with the ET-D75LE50. *7 ±22° with the ET-D75LE50, ±28° with the ET-D75LE6. *8 Requires optional lamp units for portrait mode. *9 With legs at shortest position. *10 Average value. May differ depending on the actual unit. *11 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude. WITH THE ET-LAD320P/LAD320PW MOUNTED FOR THE PORTRAIT MODE: The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F). The operating temperature range is 0 °C to 35 °C (32 °F to 95 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C (32 °F to 86 °F), and the projector cannot be used in places at high altitude. Dimensions 530 (20-7/8) 200 (7-7/8) Dissipation BTU unit: mm (inches) 548.5 (21-19/32) PT-DZ13K Series Optional accessories Terminals 1 2 3 Remote 1 input/output Remote 2 input Serial input/output SDI 1 input (PT-DZ13K/DS12K/ DZ10K only) 5 SDI 2 input (PT-DZ13K/DS12K only) 6 HDMI input 1 2 3 4 4 5 6 7 8 9 10 11 12 13 RGB 1 input DVI-D input RGB 2 input Video input 3D sync 1 input/output (PT-DZ13K/DS12K/DW11K only) 12 3D sync 2 output (PT-DZ13K/DS12K/DW11K only) 13 LAN connector 7 8 9 10 11 ET-D75LE6 Zoom lens ET-D75LE10 Zoom lens Projection distance ET-PKD310H Ceiling mount bracket for high ceilings ET-PKD310S Ceiling mount bracket for low ceilings PT-DZ13K/DZ10K (16:10 aspect ratio) Diagonal image size 1.78 [ 70 ˝ ] 2.54 [100 ˝ ] 3.81 [150 ˝ ] 5.08 [200 ˝ ] 7.62 [300 ˝ ] 10.16 [400 ˝ ] 12.70 [500 ˝ ] 15.24 [600 ˝ ] 25.40 [1000 ˝ ] E T-D75LE6 0.9 –1.1:1 min. ma x. 1.35 (4.5) 1.96 (6.5) 2.96 (9.8) 3.97 (13.1) 5.99 (19.7) 8.00 (26.3) 10.01 (32.9) 12.03 (39.5) 20.08 (65.9) 1.62 (5.3) 2.34 (7.7) 3.55 (11.7) 4.75 (15.6) 7.17 (23.6) 9.58 (31.5) 11.99 (39.4) 14.40 (47.3) 24.06 (78.9) E T-D75LE10 1.3 –1.7:1 min. ma x. 1.90 (6.3) 2.76 (9.1) 4.18 (13.8) 5.60 (18.4) 8.44 (27.7) 11.28 (37.1) 14.12 (46.4) 16.96 (55.7) 28.33 (92.9) 2.46 (8.1) 3.56 (11.7) 5.40 (17.8) 7.24 (23.8) 10.91 (35.8) 14.58 (47.9) 18.25 (59.9) 21.93 (72.0) 36.61 (120.1) Throw distance E T-D75LE20 E T-D75LE30 1.7–2.4:1 2.4 – 4.7:1 min. ma x. min. ma x. 2.46 (8.1) 3.55 (11.7) 5.37 (17.7) 7.19 (23.6) 10.82 (35.6) 14.46 (47.5) 18.09 (59.4) 21.73 (71.3) 36.27 (119.0) 3.58 (11.8) 5.17 (17.0) 7.81 (25.7) 10.45 (34.3) 15.73 (51.7) 21.01 (69.0) 26.29 (86.3) 31.58 (103.6) 52.70 (172.9) 3.56 (11.7) 5.13 (16.9) 7.75 (25.5) 10.38 (34.1) 15.62 (51.3) 20.86 (68.5) 26.11 (85.7) 31.35 (102.9) 52.33 (171.7) 6.94 (22.8) 9.99 (32.8) 15.08 (49.5) 20.17 (66.2) 30.34 (99.6) 40.51 (132.9) 50.68 (166.3) 60.85 (199.7) 101.53 (333.1) E T-D75LE40 4.6 –7.4:1 E T-D75LE8 7.3 –13.8:1 min. ma x. min. ma x. 6.87 (22.6) 9.88 (32.4) 14.90 (48.9) 19.93 (65.4) 29.97 (98.3) 40.01 (131.3) 50.05 (164.2) 60.09 (197.2) 100.25 (328.9) 11.05 (36.2) 15.85 (52.0) 23.85 (78.3) 31.86 (104.5) 47.87 (157.0) 63.87 (209.6) 79.88 (262.1) 95.89 (314.6) 159.93 (524.7) 10.78 (35.4) 15.57 (51.1) 23.54 (77.3) 31.52 (103.5) 47.47 (155.8) 63.42 (208.1) 79.37 (260.5) 95.32 (312.8) 159.13 (522.1) 20.56 (67.5) 29.53 (96.9) 44.47 (146.0) 59.41 (195.0) 89.30 (293.0) 119.19 (391.1) 149.08 (489.1) 178.96 (587.2) − (–) E T-D75LE50 0.7:1 1.01 (3.3) 1.47 (4.8) 2.24 (7.4) 3.01 (9.9) 4.56 (15.0) 6.10 (20.0) 7.64 (25.1) 9.18 (30.1) 15.35 (50.4) ET-D75LE20 Zoom lens ET-D75LE30 Zoom lens 1.78 [ 70 ˝ ] 2.54 [100 ˝ ] 3.81 [150 ˝ ] 5.08 [200 ˝ ] 7.62 [300 ˝ ] 10.16 [400 ˝ ] 12.70 [500 ˝ ] 15.24 [600 ˝ ] 25.40 [1000 ˝ ] E T-D75LE6 1.0 –1.2:1 min. ma x. 1.39 (4.6) 2.01 (6.7) 3.05 (10.0) 4.08 (13.4) 6.15 (20.2) 8.22 (27.0) 10.29 (33.8) 12.36 (40.6) 20.64 (67.7) 1.66 (5.5) 2.41 (7.9) 3.65 (12.0) 4.89 (16.1) 7.37 (24.2) 9.85 (32.4) 12.33 (40.5) 14.81 (48.6) 24.73 (81.1) E T-D75LE10 1.4 –1.8:1 min. ma x. 1.95 (6.4) 2.82 (9.3) 4.27 (14.0) 5.72 (18.8) 8.62 (28.3) 11.52 (37.9) 14.42 (47.4) 17.33 (56.9) 28.93 (94.9) 2.52 (8.3) 3.64 (12.0) 5.52 (18.2) 7.39 (24.3) 11.14 (36.6) 14.90 (48.9) 18.65 (61.2) 22.40 (73.5) 37.40 (122.7) Throw distance E T-D75LE20 E T-D75LE30 1.8 –2.6:1 2.6 – 5.1:1 min. ma x. min. ma x. 2.52 (8.3) 3.63 (12.0) 5.49 (18.0) 7.34 (24.1) 11.06 (36.3) 14.77 (48.5) 18.48 (60.7) 22.20 (72.9) 37.05 (121.6) 3.66 (12.1) 5.28 (17.4) 7.98 (26.2) 10.67 (35.1) 16.07 (52.8) 21.46 (70.5) 26.86 (88.2) 32.25 (105.9) 53.84 (176.6) 3.64 (12.0) 5.24 (17.3) 7.92 (26.0) 10.60 (34.8) 15.96 (52.4) 21.31 (70.0) 26.67 (87.5) 32.03 (105.1) 53.45 (175.4) 7.10 (23.3) 10.21 (33.6) 15.41 (50.6) 20.60 (67.6) 30.99 (101.7) 41.38 (135.8) 51.77 (169.9) 62.15 (204.0) 103.71 (340.3) E T-D75LE40 5.0 – 8.0:1 E T-D75LE8 7.9 –15.0:1 min. ma x. min. ma x. 7.02 (23.0) 10.10 (33.1) 15.23 (50.0) 20.36 (66.8) 30.61 (100.4) 40.87 (134.1) 51.12 (167.7) 61.38 (201.4) 102.41 (336.0) 11.29 (37.0) 16.19 (53.1) 24.37 (80.0) 32.54 (106.8) 48.89 (160.4) 65.25 (214.1) 81.60 (267.7) 97.95 (321.4) 163.36 (536.0) 11.09 (36.4) 16.01 (52.6) 24.21 (79.5) 32.40 (106.4) 48.80 (160.2) 65.19 (213.9) 81.59 (267.7) 97.98 (321.5) 163.56 (536.6) 21.14 (69.4) 30.36 (99.6) 45.72 (150.0) 61.08 (200.4) 91.79 (301.2) 122.51 (402.0) 153.23 (502.8) 183.95 (603.6) − (−) E T-D75LE50 0.8:1 1.03 (3.4) 1.50 (4.9) 2.29 (7.5) 3.08 (10.1) 4.65 (15.3) 6.23 (20.4) 7.81 (25.6) 9.38 (30.8) 15.68 (51.5) PT-DW11K (16:9 aspect ratio) Diagonal image size 1.78 [ 70 ˝ ] 2.54 [100 ˝ ] 3.81 [150 ˝ ] 5.08 [200 ˝ ] 7.62 [300 ˝ ] 10.16 [400 ˝ ] 12.70 [500 ˝ ] 15.24 [600 ˝ ] 25.40 [1000 ˝ ] E T-D75LE6 1.0 –1.2:1 min. ma x. 1.56 (5.2) 2.25 (7.4) 3.41 (11.2) 4.56 (15.0) 6.87 (22.6) 9.18 (30.2) 11.49 (37.8) 13.80 (45.3) 23.04 (75.6) 1.87 (6.2) 2.70 (8.9) 4.08 (13.4) 5.47 (18.0) 8.24 (27.1) 11.01 (36.2) 13.78 (45.2) 16.55 (54.3) 27.63 (90.6) E T-D75LE10 1.4 –1.9:1 min. ma x. 2.18 (7.2) 3.16 (10.4) 4.78 (15.7) 6.40 (21.0) 9.64 (31.7) 12.88 (42.3) 16.12 (52.9) 19.36 (63.6) 32.32 (106.1) 2.82 (9.3) 4.08 (13.4) 6.18 (20.3) 8.27 (27.2) 12.46 (40.9) 16.65 (54.7) 20.84 (68.4) 25.02 (82.1) 41.78 (137.1) Throw distance E T-D75LE20 E T-D75LE30 1.8 –2.7:1 2.7– 5.2:1 min. ma x. min. ma x. 2.82 (9.3) 4.06 (13.4) 6.14 (20.2) 8.21 (27.0) 12.36 (40.6) 16.50 (54.2) 20.65 (67.8) 24.80 (81.4) 41.38 (135.8) 4.10 (13.5) 5.91 (19.4) 8.92 (29.3) 11.93 (39.2) 17.96 (59.0) 23.98 (78.7) 30.01 (98.5) 36.03 (118.3) 60.13 (197.3) 4.07 (13.4) 5.87 (19.3) 8.86 (29.1) 11.85 (38.9) 17.83 (58.6) 23.81 (78.2) 29.80 (97.8) 35.78 (117.4) 59.71 (195.9) 7.94 (26.1) 11.42 (37.5) 17.23 (56.6) 23.03 (75.6) 34.63 (113.7) 46.23 (151.7) 57.83 (189.8) 69.43 (227.8) 115.83 (380.0) E T-D75LE40 5.1– 8.2:1 E T-D75LE8 8.2–15.4:1 min. ma x. min. ma x. 7.86 (25.8) 11.30 (37.1) 17.02 (55.9) 22.75 (74.6) 34.20 (112.2) 45.66 (149.8) 57.11 (187.4) 68.56 (225.0) 114.38 (375.3) 12.62 (41.4) 18.10 (59.4) 27.23 (89.3) 36.36 (119.3) 54.62 (179.2) 72.88 (239.1) 91.14 (299.0) 109.40 (358.9) 182.44 (598.6) 12.43 (40.8) 17.92 (58.9) 27.08 (88.9) 36.23 (118.9) 54.54 (179.0) 72.85 (239.1) 91.16 (299.1) 109.47 (359.2) 182.70 (599.4) 23.65 (77.6) 33.94 (111.4) 51.10 (167.7) 68.25 (224.0) 102.55 (336.5) 136.85 (449.0) 171.16 (561.6) 205.46 (674.1) − (−) E T-D75LE50 0.8:1 1.16 (3.8) 1.69 (5.5) 2.57 (8.4) 3.45 (11.3) 5.21 (17.1) 6.97 (22.9) 8.72 (28.6) 10.48 (34.4) 17.52 (57.5) ET-PFD310 Frame ET-EMF320 Replacement filter unit PT-DS12K (4:3 aspect ratio) Diagonal image size ET-PAD310 Attachment for ceiling mount bracket ET-D75LE40 Zoom lens ET-D75LE8 Zoom lens ET-D75LE50 Fixed-focus lens ET-SFD320 Smoke cut filter ET-SFR320 Replacement smoke cut filter ET-LAD310A Replacement lamp unit (one bulb) ET-LAD310AW Replacement lamp unit (a set of two bulbs) ET-D75MC1 Lens motor cover ET-LAD320P Replacement lamp unit for portrait mode (one bulb) ET-LAD320PW Replacement lamp unit for portrait mode (a set of two bulbs) NOTES ON USE 1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock. 2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. 3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions: • Never place objects on top of the projector while it is operation. • Make sure there is an unobstructed space of 500 mm (19-11/16 inches ) or more around the projector’s exhaust openings. • Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup. • If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 °C (32 °F) and 40 °C (104 °F). Also make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake. 4. If the projector is to be operated continuously 24 hours a day / 7 days a week, use the dual-lamp optical system’s alternating lamp operation function (Lamp Relay mode). The projector can be operated continuously 24 hours a day / 7 days a week in dual-lamp operation mode. Allow a minimum of two hours per week of non-operation time per lamp if using the dual-lamp operation mode. 5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. • The length of time that it takes for the lamp to break or fail to illuminate varies greatlydepending on individual lamp characteristics and usage conditions. • The brightness of the lamp will gradually decrease with use. • The usage environment affects the lamp replacement cycle. 6. Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used with it. 7. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance. High education Large auditoriums / hotels Museums / entertainment Control / command rooms For more information about Panasonic projectors, please visit: Projector Global Web Site – panasonic.net/avc/projector Facebook – www.facebook.com/panasonicprojector YouTube – www.youtube.com/user/PanasonicProjector Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, please consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, the United States, and other countries and regions or registered trademarks. RoomView, Crestron RoomView, and Crestron Connected are trademarks of Crestron Electronics, Inc. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. All other trademarks are the property of their respective trademark owners. Projection images simulated. © 2013 Panasonic Corporation. All rights reserved. JQA-QMA14392 EC98J2010 051 Factories of Business Solutions Business Group have received ISO 14001:2004—the Environmental Management System certification (except for third parties’ peripherals). All information included here is valid as of April 2013. PT-DZ13KG1 Printed in Japan.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project