AEG | COMPETENCE B4301-4 | Operating instructions | AEG COMPETENCE B4301-4 Operating instructions

Protect
Uninterruptible
power supply and
surge protection
2
AEG Power
Solutions
The right UPS
for every
application
“Plug & Safe” –
possibilities
04 – 05
Product overview
AEG Power Solutions
provides tailored solutions
to customers’ needs for
protection against network
faults and the problems
caused by data loss and
downtime costs. We assist
our clients in all aspects of
securing and controlling
their electricity supply.
06 Surge protection
07– 09
Surge protection
for home / small office
10 –11
UPS technology
12 – 31
Compact UPS for home / small office / SMB / IT
32 – 37
Extensions and accessories
Product Support
Our product range extends
from surge protection for
home and office to UPS
systems for industry.
We deliver UPS devices for
home use, compact rack
mounted UPS systems and
equipment for small and
medium IT concerns and
“Plug & Safe” – parallel
switching enabled modular
UPS systems for data
centers and for industry.
AEG Power Solutions
is a customer oriented,
experienced company
that is always there for you.
The simple expansion of
products, reliable delivery
and business oriented service
and support packages allows
you to realize your individual
protection requirements.
38 Service packages
39
Configurator
Worlds first single-phase
Thyristor inverter
1961
First single-phase power
controller for resistive loads
1961
Founding of
“Allgemeine
Elektrizitäts
Gesellschaft (AEG)”
1883
Construction of
SAFT Power Systems
1947
Establishment of
the AEG plant in
Warstein-Belecke
1945
The first
performance Thyristors
are built in series
1952
Worlds first three-phase
Thyristor inverter
1965
For the first time in
Europe, bi-directional
Thyristors (Triacs)
are built
1968
Development of
power controllers
1969
DC supply for the
German Post Office
1951
5/25:
First switching
power supply
1972
3
Experience and
continuity
For over 60 years, AEG Power
Solutions has been a leading
provider of reliable and
efficient power systems for
mission critical applications
for customers involved in
electricity supply,
telecommunications, lighting,
transportation, manufacturing,
renewable energy and industry.
Protect 3.: Worldwide,
the first UPS with
100 % digital control
1995
Thyrosoft: First
soft starter motor
Thyro-P: Digital
power controller
1984
1999
Profitec S: First rectifier
with microprocessor
1985
First UPS with IGBT
transistor (single
and three phase)
1988
Field service locations
worldwide
With over 250 engineers,
technicians and project
managers, AEG Power
Solutions are carrying out
pioneering work in research
and development and in
application engineering. As a
result of this ingenuity, AEG
Power Solutions currently has
more than 70 active patents in
the field of electricity supply.
ecopx:
Hybrid emergency
power supply with
solar and wind energy
With 20 branches and over
50 qualified partners, AEG
Power Solutions deliver
competent service and on-site
support to our customers
worldwide in 100 countries.
Our technical teams are able
to perform complete turnkey
projects for our customers.
On request, we can work on
projects for electricity supply,
from project management
planning through to final
installation, whether it is a new
plant, an expansion or a retro
fit out.
Talk to us!
2009
Protect PV.250:
Solar central inverters with
operating efficiency of 98.7 %
2010
Protect RCS: Rectifier,
battery charge and DC
power supply for all
industrial applications
2007
Thyrobox PI:
Power supply system with
10 – 20 % higher output for
polysilicon production
2010
Protect Blue:
3 level IGBT (rectifier
and inverter) UPS
developed specifically
for Large Data Centers
2012
4
Surge Protection for home and small office
Product
overview
page 7
Protected sockets
7
Protect Basic
Protect Travel
Power strip for
all standard applications
Security on the move for safe
charging of your devices
6 (GE6) / 7 (GE7)
1
Euro-sockets
2
Power switch

USB charger
2
Network protection
Sockets with child protection
Special features


Cable holder
(Basic.GE7)
Flexible rotatable
power supply
Compact UPS for home / small office / SMB / IT
page 12
Output power
Technology according to IEC 62040-3
14
Protect Home
Protect Alpha
Complete protection
for multimedia applications
Suitable protection for SoHo
applications, telephone equipment,
NAS systems, PCs
0.6 kVA
0.45 – 1.2 kVA
(offline)
Input /output
(line interactive)
1 ph~ / 1 ph~
1 ph~ / 1 ph~
Parallel operation
Display
Battery system
Typical autonomy time (min.)
Output power
Technology according to IEC 62040-3
Input /output
Parallel operation
Display
Battery system
Typical autonomy time (min.)
LED
LED Internal
Internal
10
5 – 20
page 20
22
Protect C
Protect C
Tower UPS for
sensitive networks, intranet
and internet servers
Tower UPS for
sensitive networks,
small computer centers
1 – 3 kVA
6 – 10 kVA
(double conversion)
(double conversion)
1 ph~ / 1 ph~
1 ph~ / 1 ph~
No
Yes
LED & LCD (multilingual)
LED
Internal / External
Internal / External
5 – 90
5 – 90
5
8
8
9
9
Protect Entertainment
Protect TwinPower
Protect Business
Protect Office
Intelligent protection
for entertainment equipment
with master-slave function
Security for
flexible connectivity and
safe power supply
Business solutions
with surge protection
and USB charger
Compact protection
for PC and
peripheral equipment
6
4+1
6
3



2
2
2


2





Antenna line
protection
Two part
construction
Foldable
construction
Audio
connection
16
18
Protect A
Protect B. Pro
Protection for PCs,
workstations and
telephone equipment
Efficient rack / tower UPS
for small server and
network components
with sinusoidal output
0.5 –1.4 kVA
0.75 – 3 kVA
(line interactive)
(line interactive)
1 ph~ / 1 ph~
1 ph~ / 1 ph~
LED / LCD
LED & LCD
Internal
Internal / External
10 – 30
10 – 60
24
26
28
30
Protect D
Protect D
Protect 1
Protect 1. M
Compact UPS for
rack mounted protection
of server, network and
IT equipment
Compact UPS for
rack mounted protection
of server, network and
IT equipment
For small data centers,
protection of cash till systems
and building facilities
Scalable and
modular high-performance
UPS system for the IT sector
1 – 3 kVA
6 –10 kVA
10 – 20 kVA
4 – 24 kVA
(double conversion)
(double conversion)
(double conversion)
(double conversion)
1 ph~ / 1 ph~
1 ph~ / 1 ph~
3 ph~ / 1 ph~
1 ph~ or 3 ph~ / 1 ph~
No
Yes
Yes
Yes (internal)
LED & LCD (multilingual)
LED & LCD (multilingual)
LED
LED & LCD
Internal / External
Internal / External
External
External
6 – 90
5 – 45
6 – 80
15 – 90
For higher power ratings please contact your AEG Power Solutions representative
6
Surge
Protection
When the
voltage rises
High voltage surge –
high damage
Over 1.7 million lightning
flashes were counted in
Germany in 2011. The flash
frequency was 0.5 to 10
impacts per km2 per annum.
Under unfavorable conditions,
electrical surge damage
can still occur up to 3 km
from the lightning strike.
Surge protection
Household appliances are
becoming more valuable,
especially as the number of
computers and entertainment
electronics continues to
rise steadily. Devices are of
increasing sophistication and
quality and are, therefore,
more expensive. When a
lightning strike occurs, there
is an enormous increase in
voltage in power supply lines.
This over-voltage or surge,
may damage any connected
devices, destroying or
irreparably damaging them.
A single power surge can cause
a loss of several thousand
Euros. If only small parts are
damaged, the entire system
often requires replacing. Even
if a repair is possible, it is
usually difficult and expensive.
Even simple switching
of a fluorescent lamp
fitted with a conventional
ballast starter within a
household can generate an
unwanted power surge.
•Telephone equipment
and routers
Surge protection solutions
from AEG Power Solutions,
safeguards your valuable
equipment cost effectively
and protects you from
problems and financial loss.
Particularly sensitive
electronic equipment
All of our surge protectors
are equipped with the
latest metal oxide varistors.
Connected loads are effectively
protected up to 36000 A from
impact and current spikes.
While traditional varistors
always carried the risk of
fire caused by over-voltage,
the new generation is
characterized by the highest
thermal stability, providing
an even higher level of
protection. This is back
up by the KEMA KEUR
certificate and the GS seal.
•Flat screen TV and
LCD screens
•Computers and peripherals
•Satellite receivers
•Games consoles
•Home theater systems
Areas of application
Telephone equipment / Router
Protect
Basic
Protect
Travel
Protect
Entertainment



Flat screen TV & receiver
Games console


Computers & peripherals


HiFi equipment & speakers

Mobile phones & MP3 players
Small household equipment



Protect
TwinPower
Protect
Business
Protect
Office















7
Protect Basic
Protect Travel
Protect Basic.GE6
Protect Basic.GE7
Protect Basic
5 outputs provide room for
additional standard safety
plugs and remote sockets for
the connection of larger plug
power supplies. Additional
filters serve to mitigate high
frequency noise. Cable
clutter is avoided with the
built-in cable holder (GE7).
Operating status and
active surge protection are
displayed with two LEDs.
Via the power switch, the
load is disconnected from
the network in order to avoid
standby power usage.
Protect Travel
Protect Travel
Main characteristics
•5 sockets plus 1 or 2
remote outputs e.g. for
larger power supplies
•Long power cable (1.8 m)
with angled plug
•Resettable circuit breaker
•All outputs fitted with
child safety protection
•Fixing options for
wall mounting
•LEDs indicate operating
status and active
surge protection
•Surge protection
up to 36000 A
•Full 3-line protection
•10 year warranty
Protect Travel provides
surge protection in the
smallest places. This makes
it ideal for trips or for use
in confined spaces.
Often the quality of power
in your destination country is
not sufficient for your secure
power requirements. Play
it safe and protect laptops,
mobile phones and digital
cameras on the road against
power surges. With the two
integrated USB chargers you
will save on the need to carry
additional chargers with you.
Main characteristics
•3 surge protected
load terminals
Part numbers
•2 remote, protected
USB charging sockets
•Protect Basic.GE6:
600 000 7194
•Pilot light indicates active
surge protection
•Protect Basic.GE7:
600 000 7196
•Compact size, ideal for travel
•Protect Basic.FR7
600 000 7198
•All outputs fitted with
child safety protection
•Protect Basic.FR6
600 000 7197
•Surge protection
up to 36000 A
•Protect Basic.UK5
600 000 7190
•10 year warranty
•90° swivel cable
Part number
•Protect Travel:
600 000 7747
Protect Basic.GE7
Integrated cable organizer
Protect Travel
Compact dimensions
ideal for travel bag
8
Protect
Entertainment
Protect
TwinPower
Protect Entertainment
Protect TwinPower
Protect
Entertainment
Protection for home
entertainment
Protect your valuable
investment and save money
on standby costs! With its
master-slave function, the
Protect Entertainment is
especially suitable for modern
home theater and multi media
equipment.
Protect Entertainment Master-Slavefunction switchable so that all outputs
deliver power
Protected
antenne socket
Protection for
network cables (RJ45)
Protect Entertainment
Two protected
USB charging
sockets
Easy access power switch
controls the remote part of
Protect TwinPower
Protect TwinPower
Once you turn off the main unit
(master), Protect Entertainment
interrupts the power supply to
the peripheral devices (slaves)
automatically so that no
electricity is wasted on standby.
Two constant current carrying
sockets provide power to
devices whose power supply
should not be broken e.g. hard
disk drives or satellite receivers.
In addition, Protect
Entertainment also provides
surge protection for antenna
and network cables so that
all of your entertainment
equipment is protected
against over voltage.
•Over voltage protection for
coaxial antenna cables
•Surge protection for network
cables (RJ45)
•All outputs fitted with child
safety protection
•Surge protection
up to 36000 A
•Full 3-line protection
Main characteristics
•10 year warranty
•1 master and 3 slave sockets,
adjustable trigger threshold
of master, master-slave
function disabled
Part number
•Protect Entertainment:
600 000 7745
•2 permanent electrical
outputs
Protect TwinPower
Security for flexibility
in your application
The Protect TwinPower from
AEG Power Solutions offers a
flexible solution for desktop
surge protection. With 7 power
outputs, Protect TwinPower
offers enough ports for all
peripherals connected to a
computer. With its two-piece
design, the leads are placed in
the most flexible position, the
first part with 4 sockets e.g. to
supply power for computers,
printers and monitors and a
desk unit with 3 sockets. You
can disconnect the remote
part of the TwinPower from the
grid to avoid standby charges
for your connected devices
when they are not being used.
With the two protected USB
charging sockets you can, for
example, charge most mobile
phones and MP3 players
Main characteristics
•Two part surge protector strip
•Power switch to turn
off the remote gang
•A total of 4 + 3
protected outputs
•2 protected USB
charging sockets
•Easily accessible power switch
•All outputs fitted with
child safety protection
•Surge protection
up to 36000 A
•Full 3-line protection
•10 year warranty
Part number
•Protect TwinPower:
600 000 7749
9
Protect Business
Protect Office
Protect Business
Protect Office
Protect Business
Space saving
business solution
Protect Office
Compact protection
for your PC
Protect laptops and projectors
at conferences.
•Surge protection for
network cables (RJ45)
With its folding mechanism,
Protect Business is suitable
for use at conferences and on
desktops.
•Foldable design for
conference tables
Additionally, it offers surge
protection via the two
integrated USB charging
sockets and the data cable
(RJ45) socket.
•Surge protection
up to 36000 A
Main characteristics
•6 protected sockets
•2 protected USB
charging sockets
•All outputs fitted with
child safety protection
•Full triple protection
•10 year warranty
Part number
•Protect Business:
600 000 7748
Protect Office is the
compact power distributor
for the desktop. The three
power outputs and network
connections ensure all round
protection for your computer.
During development, compact
dimensions were always at the
forefront. Additionally, you
can connect microphones and
speakers directly to the Protect
Office avoiding the clutter of
cables behind and on your
desk. With the central power
switch, you can turn off
peripheral devices and avoid
standby power charges.
Main characteristics
•3 protected outputs,
one that is rotatable by 90°
•2 protected USB
charging sockets
•Surge protection for
network cables (RJ45)
•Additional connection
of microphone and
speakers, audio extension
cable included.
Two protected
USB charging sockets
•Surge protection
up to 36000 A
Protection for network cables (RJ45)
Protect Business
Protect Business
Foldable for space saving
Up to 90° rotatable
output socket
Two protected
USB charging sockets
Audio input and output,
audio extension cable (1.8 m)
included
Protect Office
Network protection (RJ45)
Protect Office
•Full triple protection
•10 year warranty
Part number
•Protect Office:
600 000 7746
10
UPS
Technology
Mains voltage variations
occur more often
than expected. The
consequences of this
are crashes, loss of
data and cost intensive
downtime. The solution
is an uninterruptible
power supply (UPS)
which offers a variety of
levels of protection.
Uninterruptible
power supply
There are three different
UPS topologies offering
different protection levels
against all types of mains
disruption and variation.
Precise protection
for every
application
VFD technology
VI technology
VFI technology
“Voltage and Frequency
Dependent” in compliance
with IEC 62040-3, also
referred to as offline, protects
against many problems in
your network. Under normal
conditions it conducts the
input current to its outlet.
When the power supply fails
it switches over to a built in
battery to compensate for any
variations in the mains supply.
“Voltage Independent” in
compliance with IEC 62040-3,
also known as line interactive,
protects against the most
common power problems
experienced in a network.
Here the UPS also monitors
the voltage level and balances
under and over voltages.
The VI technology offers a
good compromise between
reasonable security and
moderate operating costs.
“Voltage and Frequency
Independent” in compliance
with IEC 62040-3, as well as
online or double conversion
offers superior protection
against problems in the power
supply. Here, the input voltage
is fed to a rectifier, with output
being supplied by an inverter.
Under normal operating
conditions, the inverter
receives its supply directly
from the rectifier, when the
power supply fails it is supplied
directly from the batteries.
Consumers have no direct
connection to mains AC power
supply; the UPS protects them
from all power grid problems.
Benefits
•Smallest size
•Highest efficiency
•Lowest operating costs
Benefits
•Extremely wide input
voltage window
•Rugged design
•High efficiency
•Low operating costs
In critical situations and
with sensitive equipment,
protection by VFI technology
is highly reccomended.
Benefits
Outage-blackouts
VFD
VI
VFI
Offline
Sags / brownouts
Dynamic overvoltage
Undervoltage (continuous)
Line interactive
Overvoltage (continuous)
Transients /surges
Frequency variations
Voltage distortions (bursts)
Voltage harmonics
Optimum protection for every application
Online
•Sinusoidal input current
and output voltage
•No switching times,
therefore no gaps
in coverage
•Frequency converter
operation possible
•Additional internal
redundancy switch over
•Optimum protection
against power disturbances
11
12
Protect Home
Uninterruptible
security for PCs and
multimedia
Protect yourself with an
uninterruptible power supply
against data loss. With an
output of 600 VA, Protect
Home protects. It measures
and protects against the
consequences of power
outages, voltage fluctuations
and dangerous power spikes.
Appropriate protection
Protect Home is especially
designed for domestic
multimedia applications.
It provides complete surge
protection for telephone,
fax and modem.
Consumers are connected
directly to protected sockets
directly through the UPS.
Protect Home has all of
the features that current
technology can provide
to protect your valuable
equipment from short circuit
and power overload.
Easy to use
The clear “one board”
design and LED indicators
let you know about the
most important operating
conditions. This ease of
use is complemented
by an audible alarm.
Easy to control
Protect Home can be
connected quickly and easily
with a PC or Mac via the
USB or RS232 interfaces.
Through the included
AEG shutdown software
“CompuWatch”, the unit
allows you to control the most
important operations as well as
providing automatic shutdown
during longer power outages.
•Fully fledged “CompuWatch”
“plug&play” software
•Data line protection
(telephone, fax and modem)
•User friendly battery design
(access to the battery
compartment on the
underside of the equipment)
•Individual operation,
wall mountable
•1 output for connecting
consumers with high
power requirements
such as laser printers
Best features:
Comprehensive protection
for telephone, fax or
modem, USB and serial
port for communication
with your PC or Mac.
Main characteristics
•Rugged UPS technology
for power outages, voltage
fluctuations and spikes
•USB and RS232 interface for
control and management
for PC and Mac
Mains
input cord
Input circuit
breaker
Overload protection
telephone / fax / modem
RS232
USB
13
Classification VFD SY 322 acc. to IEC 62040-3
Power type rating
Protect Home
600 VA
300 W
Part number
600 001 1844 (UK)
600 001 2013 (FR)
UPS input
Input voltage
Voltage range without battery supply
Frequency
Current consumption
230 VAC
+6 % / -10 %
50 Hz / 60 Hz ±5 Hz
3A
UPS output
Rated output voltage
Rated output voltage in battery mode
Frequency in battery mode
Output current
Transfer time at mains outage
Voltage waveform
Overload /short circuit protection
230 VAC
±10 %
50 Hz / 60 Hz ±1 Hz
2.6 A
2 – 6 ms (typical)
Modified sine wave
Yes
Battery
Type
Rated voltage (linked)
Sealed, maintenance free (proprietary brand)
12 VDC
Autonomy time for 1 PC with 17" TFT
~ 10 min.
Overload / deep discharge protection
Yes
Recharge time (to 90 % of rated capacity)
8h
Communication
Interfaces
Shutdown software (on CD)
Failure indicators (acoustic /visual)
USB and RS232 for status and measurement levels
Included for all mainstream operating systems (e.g. Windows, Linux, Mac)
Mains failure, overload, battery low, fault
General data
Audible noise (1 m distance)
<40 dB(A) (fanless)
Operating temperature range
0° – 40 °C
Humidity
20 – 90 %
Operation altitude
EMC conformity
Product safety
Data line protection
Outputs
Equipment color
Dimensions approx. W x H x D (mm)
Weight approx.
Shipment
Conformity
Up to 1000 m at nominal load
EN 62040-2 Class C2, EN 61000-3-2, EN 61000-3-3
EN 62040-1
RJ11 (telephone, fax, modem)
4 shock proof sockets
(4 x surge protection, 3 x UPS protection)
Blackline, high gloss finish
137 x 96 x 310
3.5 kg
Mains input cord, management software “CompuWatch” (CD),
USB and RS232 communication cable, operating instructions
CE
14
Protect Alpha
Uninterruptible
security for
applications in
the SoHo sector
Protect yourself using an
uninterruptible power supply
for optimal protection against
loss of data wherever you need
it. Available in the 450 VA to
1200 VA power range the series
stands for solid, yet affordable,
protection for numerous
applications in the small and
home office environment.
Easy to use
Main characteristics
All models are characteristically
easy to use and are equipped
with an audible alarm and
automatic grid frequency
detection (50 / 60 Hz). An LED
display on the front panel
provides information about
the current operating status.
•Modern VI (line interactive)
technology for power
outages and dangerous
over voltage
Protect alpha uses robust
line interactive technology
and therefore guarantees a
stable power supply to the
connected loads over a wide
power input voltage range
and without strain on the
internal battery system.
Immediate operational
readiness with the supplied
cable set contributes to
the ease of use.
Flexibility in our lineup
The fanless design combined
with compact dimensions
and a low weight are capable
of accommodating even the
most difficult conditions.
All functions are microprocessor controlled and monitored;
measurement values and
messages are always available
because Protect A communicates via a USB interface to
your PC. Through the included
AEG shutdown software
“CompuWatch”, the unit
allows you to control the most
important operations as well as
providing automatic shutdown
during longer power outages.
•Automatic voltage regulation
against voltage fluctuations
(AVR)
•Silent operation due
to fanless design
•Easy installation with the
supplied cables and easy
handling
•Sealed, maintenance-free
branded lead acid batteries
with discharge protection
•USB interface for PC
connection
•Data line protection for
telephone, fax and modem
(RJ11)
•Compact dimensions,
low weight
USB
Overvoltage protection
for data interface, fax,
modem and network
Overvoltage protection
for data interface,
fax, modem
UPS input
UPS outputs with
battery backup and
overvoltage protection
UPS outputs with
battery backup and
overvoltage protection
UPS input
USB port on the front panel
Protect alpha 450 / 600 / 800 – rear view
Protect alpha 1200 – rear view
15
Classification VI SY 322 acc. to IEC 62040-3
Type rating
Part number
alpha 450
alpha 600
alpha 800
alpha 1200
450 VA
600 VA
800 VA
1200 VA
240 W
360 W
480 W
600 W
600 001 4746
600 001 4747
600 001 4748
600 001 4749
UPS input
Nominal connection voltage
220 VAC / 230 VAC / 240 VAC
Voltage range without battery operation
170 – 280 VAC
Frequency (automatic selection)
50 Hz / 60 Hz ±5 Hz
UPS output
Rated output voltage / AVR technology
220 VAC / 230 VAC / 240 VAC
Rated output voltage in battery operation
±10 %
Frequency in battery operation
Nominal output current (at 230 VAC)
50 Hz / 60 Hz ±1 Hz
2A
2.6 A
Changeover time in the event of mains failure
3.5 A
5.2 A
4 – 8 ms (typical)
Voltage curve
Modified sine wave
Overload protection
Yes
Battery
Type
Autonomy time at 120 W
Sealed, maintenance free (proprietary brand)
~5 min.
~10 min.
~15 min.
Exhaustive discharge protection / protection against excess load
Yes
Charging time (to 90 % of rated capacity)
6h
~20 min.
Communication
Interfaces
USB (with status messages and measured values)
Indicator
mains / battery use
failure warning
AC mode, battery mode
Audible alarms
Backup mode, low battery, overload, fault
Status display
LED display
General data
Inherent noise (1 m distance)
<40 dB(A)
Operating temperature range
0° – 40 °C
Fanless
Humidity
0 – 90 % (without condensation)
Operation altitude
Up to 1000 m at nominal load
EMC conformity
EN 62040-2 class C2, EN 61000-3-2, EN 61000-3-3
Product safety
EN 62040-1
Overvoltage protection for data lines
RJ11 (phone, fax, modem)
Mains input
IEC 320 C14
Load outputs
4 x IEC 320 C13
Housing color
Dimensions approx. W x H x D (mm)
Weight approx.
Scope of delivery
Conformity
6 x IEC 320 C13
Blackline
100 x 143 x 278
3.7 kg
139 x 195 x 365
4.4 kg
5.2 kg
Mains connection, management software “CompuWatch” (CD),
1 device connecting cable, 1 USB cable, operating instructions
CE
8.6 kg
16
Protect A
Uninterruptible
security for PCs,
workstations and
telephone systems
The Protect A series protects
your data efficiently and
cost effectively against the
consequences of power
outages, voltage fluctuations
and power surges.
Thanks to the increased range
of services it is suitable for
consumers with increased
input current requirements.
The attractive modern
design is characterized by
the high technical standards
that are in place.
Protect A proves itself in
critical situations with its high
availability thanks to modern
line-interactive (VI) technology,
robust network overload and
surge protection, as well as
a very wide power input
voltage range.
Easy to use
Main characteristics
The reliable “one-board
design” and the clear LCD
display (A. 1000 / A. 1400) on
the front clearly informs you
about the most important
operating conditions. All
models benefit from ease of
use, an audible alarm and
automatic frequency detection
(50 / 60 Hz). Immediate use
with the supplied cable set
contributes to the ease of use.
•Modern VI (line-interactive)
technology for power
outages and dangerous
over voltage
Simple to control
•Sealed, maintenance-free
branded lead acid batteries
with discharge protection
All functions are microprocessor
controlled and are constantly
monitored as measured values
and messages are available
at all times because Protect
A communicates via RS232
or USB interface to the PC or
Mac. The included special AEG
“CompuWatch” shutdown
software enables the most
important operating systems
to automatically shut down
during longer power failure.
UPS outputs with
battery backup and
overvoltage protection
•Double mains filter
against voltage spikes
•Easy installation with
the supplied cables
and easy handling
•USB and RS232 interface
for monitoring and
control of PC or Mac
•Data Line Protection
•Connectors (n) for the direct
supply of consumers with
high power requirements,
e.g. laser printer
USB
RS232 USB
Overvoltage protection
for data interface,
fax, modem
•Automatic voltage against
voltage fluctuations (AVR)
UPS output with
overvoltage protection
UPS outputs with
battery backup and
overvoltage protection
UPS input
Mains input fuse
UPS input
Overvoltage protection
for data interface, fax,
modem and network
RS232
UPS outputs with
overvoltage protection
Mains input fuse
Protect A. 500 / A. 700 – rear view
Protect A. 1000 / A. 1400 – rear view
17
Classification VI SY 322 acc. to IEC 62040-3
A. 500
A. 700
A. 1000
A. 1400
Power type rating
500 VA
700 VA
1000 VA
1400 VA
Part number
300 W
420 W
600 W
840 W
600 000 6435
600 000 6436
600 000 6437
600 000 6438
UPS input
Input voltage
220 VAC / 230 VAC / 240 VAC
Voltage range without battery mode
170 – 280 VAC
Frequency (automatic selection)
50 Hz / 60 Hz ±5 Hz
UPS output
Rated output voltage / AVR technology
220 VAC / 230 VAC / 240 VAC
Rated output in battery mode
230 VAC ±10 %
Frequency in battery mode
50 Hz / 60 Hz ±1 Hz
Nominal output current (at 230 VAC)
2.2 A
3A
Transfer time at mains outage
4.3 A
6.1 A
2 – 6 ms (typical)
Voltage waveform
Approximated sinusoidal
Overload protection
Yes
Battery
Type
Sealed, maintenance free (proprietary brand)
Autonomy time (intermediate circuit)
12 VDC
Autonomy time for 1 PC with 17" TFT
24 VDC
~10 min.
~15 min.
~25 min.
Overload / deep discharge protection
Yes
Charging time (to 90 % of rated capacity)
8h
~30 min.
Communication
Interfaces
USB and RS232 (with status messages and measured values)
Shutdown software (on CD)
Included in delivery for all major operating systems (e.g. Windows, Linux, Mac)
Alarm messages (acoustic /visual)
Mains failure, overload, battery discharged, replace battery, fault
LED Display
LCD display for input and output voltage [V] /
efficiency [%] / autonomy time [min.]
<40 dB(A)
<45 dB(A) (AC-operation <40 dB(A))
General data
Audible noise (1 m distance)
Fanless
Speed controlled fan
Operating temperature range
0° – 40 °C
Humidity
0 – 90 % (without condensation)
Operation altitude
Up to 1000 m at nominal load
EMC conformity
EN 62040-2 Class C2, EN 61000-3-2, EN 61000-3-3
Product safety
EN 62040-1
Data line protection
RJ11 (telephone, fax, modem)
Mains input
RJ11 / RJ45 (add. network), Ethernet 10 and 100 Mbit/s
IEC 320 C14
Outputs
3 + 1 x IEC 320 C13
Equipment color
4 + 2 x IEC 320 C13
Blackline with silver colored front cover
Dimensions approx. W x H x D (mm)
100 x 140 x 330
Weight approx.
6 kg
Shipment
145 x 205 x 405
6.5 kg
9.5 kg
10 kg
Mains input cord, 2 device connecting cables, management software “CompuWatch” (CD) incl. 1 network license
USB and RS232 communication cable, operating instructions
Conformity
CE
Fault indication display
Operating status display
Autonomy time
(min.)
UPS input voltage
UPS output voltage
Protect A. 1000 / A. 1400 – display screen
Consumer load (%)
Battery voltage
18
Protect B. PRO
Efficient and
innovative UPS
solutions for servers
and networks
With its high power factor of
0.9lag, Protect B. PRO is one
of the most efficient systems
with VI protection technology.
Main characteristics
Many ways of communication
are possible, thanks to
parallel operation of the
RS232 or USB interfaces
and the extension slot.
•Low operating costs
through high efficiency,
power factor 0.9lag
Also, the adaptation of the
UPS to the requirements of
modern IT environments
is reflected by the design.
The UPS can be configured
directly with the control panel.
Batteries can be easily replaced
by means of the innovative
flap mechanism at the front.
•Modern VI (line interactive)
protection technology with
sinus-shaped output voltage
•Compact shape, flexible use
through combined design
tower / rack, rotary screen
•Surge protection
(RJ11 / RJ45) for telephone,
fax, modem and network
•Full display of the essential
parameters on the
screen, e.g. the remaining
runtime in minutes
•Intelligent monitoring
system with USB and
RS232 interface; parallel
operation of USB / RS232 and
extension slot is possible
•Additional battery packs
available for B.1000 PRO,
B.1800 PRO and B.3000
PRO models for ease of
scaling of autonomy times
•Configuration directly
on the LCD
By means of the included
accessories and the rotary
screen, the UPS can be
operated in the rack as well
as in the tower mode.
LED operating status display
Display for settings,
remaining runtime
Load display
Display for UPS values
Operating
mode
Battery status display
Control panel
Easy battery replacement
through front flap
Protect B. PRO – LCD control panel
RS232 & USB
communication interfaces
Network
input
Extension slot
EPO Cooling
fan
Rotary screen
Included pedestals
Network protection
Protect B. 1000 PRO – rear view
8 x IEC 320 C13 outputs,
4 of them switchable
19
Classification VI SS 211 acc. to IEC 62040-3
Power type rating
Part number
B. 750 PRO
B. 1000 PRO
B. 1400 PRO
B. 1800 PRO
B. 2300 PRO
B. 3000 PRO
750 VA
1000 VA
1400 VA
1800 VA
2300 VA
3000 VA
675 W
900 W
1260 W
1620 W
2070 W
2700 W
600 000 8422
600 001 3872
600 000 8426
600 001 3873
600 000 8431
600 001 3875
Part number (battery pack)
600 001 3876
600 001 3874
600 001 3877
UPS input
Input voltage
220 VAC / 230 VAC / 240 VAC
Voltage range without battery mode
±20 %
Frequency (auto selection)
Current consumption at nominal load (max.)
50 Hz / 60 Hz ±5 Hz
4A
5.4 A
7.5 A
9.7 A
12.4 A
16.1 A
UPS output
Rated output voltage / AVR technology
208 VAC / 220 VAC / 230 VAC (default) / 240 VAC ±10 % (±3 % free running)
Frequency in battery mode
Output current (at 230 VAC)
50 Hz / 60 Hz ±1 Hz
3.2 A
4.3 A
6.1 A
Transfer time at mains outage
7.8 A
10 A
13 A
2 – 6 ms (typical), 8 ms max.
Voltage waveform
sinusoidal
Overload response (VI operation)
<120 % for 5 min. / 120 – 150 % for 10 s / >150 % for 1 s
Overload response (battery operation)
<110 % for 1 min. / 110 – 150 % for 10 s / 150 – 200 % for 500 ms
Battery
Type
Sealed, maintenance free (proprietary brand), hot swappable
Integrated
Yes
Rated voltage
24 VDC
Battery management
Autonomy time in min.
(full / half-load, cos j = 0.7lag)
48 VDC
72 VDC
Temperature compensated with overload and deep discharge protection;
automatic battery test; battery pack detection
5.5 / 15
Ditto UPS incl. battery expansion unit
5.5 / 15
7 / 19
7 / 20
19.5 / 48
6 / 20
6 / 15
23 / 63
Charging time (to 90 % rated capacity)
21 / 48
8h
Communication
User interface
LCD display with digital indication of relevant UPS values
Interface (dual monitoring)
RS232 and USB (with status notification and UPS data), additional communication slot in parallel mode
(SNMP / relay card); input contact for emergency power off
Shutdown software (on CD)
5 network licenses for all common OS (e.g. Windows, Linux, Mac)
Failure indicators (acoustic /visual)
3 LED indicators show UPS status, detailed indication via LCD display
(mains failure, overload, battery discharge, battery replace, fan failure)
General data
Efficiency (in ECO mode)
>97 %
Efficiency (at whole AVR range)
>90 %
Audible noise (1 m distance)
≤45 dB(A)
≤55 dB(A)
Ditto in ECO mode and max. 70 % load
≤40 dB(A)
≤45 dB(A)
Operating temperature range
0° – 40 °C
Humidity
0 – 90 % (without condensation)
Operation altitude
Up to 1000 m at nominal load
EMC conformity
EN 62040-2 Class C2, EN 61000-3-2, EN 61000-3-3
Product safety
EN 62040-1
Data line protection
RJ11 (telephone, fax, modem) / RJ45 (Ethernet 10 Mbit/s / 100 Mbit/s)
Mains input
Number of outputs / controllable via connectors
IEC 320 C14
IEC 320 C20
8 / 4
8 x IEC 320 C13
7 / 3
6 x IEC 320 C13, 1 x IEC 320 C19
Equipment color
Black metal case / silver front
Dimensions approx. W x H x D (mm)
482.6 (19") x 88 (2 U) x 420
482.6 (19") x 88 (2 U) x 520
482.6 (19") x 88 (2 U) x 640
Weight approx.
14.5 kg
24 kg
29 kg
UPS incl. battery system
Battery expansion unit
Shipment
Conformity
15 kg
25 kg
16 kg
26.5 kg
29.5 kg
39 kg
Mains input cord, 2 x device connection cables (10 A),
additional cable (16 A) for Protect B. 2300 PRO and Protect B. 3000 PRO, 2 x mounting brackets, 2 x base feet,
1 x management software “CompuWatch” (CD), 5 network licenses, RS232 and USB cable,
operating instructions
CE
20
Protect C
Uninterruptible
security for
applications in
the SMB sector
Real VFI / double conversion
online technology suitable for
safe supply application-critical
consumers in the IT environment such as workstations,
servers, storage systems, as
well as in the area of sensitive
switching and control systems.
Display of current UPS mode
Display of
UPS input
Display
of UPS
output
Indicator
UPS mode
Control panel
Protect C – LCD & control panel
The new Protect C models
in the performance levels in
1000, 2000 and 3000 VA range
represent consistent further
development of the
well-proven and highly
reliable series.
With the lag increased to 0.8,
the power factor was taken
into account for the demand
for higher performance active
consumers. The ECO and
frequency inverter for
operation mode highlights
the requirements for a modern
versatile UPS.
Main characteristics
Optimal control and
information
“Dual-monitoring” enabled
interfaces extend communication opportunities. The universally usable communication
slot also allows for the integration of SNMP network interface
cards that allow for monitoring
and management options, particularly multi-server shutdown.
The AEG “CompuWatch”
shutdown software is always
included.
•VFI topology (online / double
conversion) protection
against all mains network
problems
•Extremely wide input voltage
window of 110 VAC to
300 VAC without stress on
the internal battery system
and with a stable output
voltage
•ECO and frequency
operating voltage possible
•Expansion slot for SNMP,
potential free contacts,
remote display
The multilingual graphical LCD
display provides all the important operating states and
values that can be stored and
retrieved in addition to realtime data storage in plain text.
•Graphic LCD display with
interactive multilingual user
interface
•Configuration options
(password protected) via
the operator terminal
•Internal hardware data logger
with plain text display and
date / time stamp
•Emergency power off on
terminal block (potential-free)
(EPO) Emergency Power
Off
USB
RS232
Monitored ventilator
with intelligent
revolution regulation
Fused mains input
IEC 320 C20
Protect C. 3000 – rear view
Expansion slot for
communication cards
Connection for additional
battery modules
IEC 320 C19 outlet for
access to full power
output
4 X IEC 320 C13 ouputs
with 10A fuses
for each IEC output pair
Protect C
(cos j = 0.7lag)
Connection for UPS
output voltage via
internal terminal strip
Autonomy time (full / half load) (min.)
1000 VA
2000 VA
3000 VA
Default autonomy time
6/21
10/30
5/16
1 additional battery module
38/97
55/130
30/85
2 additional battery module
76/170
106/237
60/149
Autonomy time – battery units resemble UPS
21
Classification VFI SS 111* acc. to IEC 62040-3
C. 1000
C. 2000
C. 3000
Power type rating
1000 VA
2000 VA
3000 VA
800 W
1600 W
2400 W
Part number
(UPS including integrated battery system)
600 001 6103
600 001 6104
600 001 6105
Part number (additional battery pack)
600 001 6106
600 001 6107
UPS input
Input voltage
220 VAC / 230 VAC / 240 VAC
Voltage range without battery mode
(load dependent)
110 – 300 VAC
Frequency (auto selection)
50 Hz / 60 Hz ±10 Hz
Mains current (system reaction)
λ ≥0.99 (THDi <5%)
Current consumption at nominal load (max.)
(at 230 VAC incl. max. battery charging current)
4.6 A
8.5 A
12.5 A
UPS output
Rated output voltage (adjustable)
200 VAC / 208 VAC / 220 VAC / 230 VAC (default setting) / 240 VAC ±2 %
Frequency in battery / frequency converter mode
Nominal output current (at 230 VAC)
50 Hz / 60 Hz ±0.2 Hz
4.3 A
8.7 A
Transfer time at mains outage
Voltage waveform
Overload response
(double conversion & battery mode)
13 A
0 ms (without interruption)
Sinusoidal, distortion <3 %
<110 % for 60 s / 110 % up to <125 % for 30s / 125 % up to 150 % for 10s
Subsequent, transfer to bypass mode (if bypass available)
Crest factor
3:1
Short circuit response
Short circuit proof (3 x IN for 100 ms)
Battery
Type
Rated voltage (linked)
Sealed, maintenance-free (proprietary brand), integrated
36 VDC
Battery management
96 VDC
Exhaustive discharge protection / Protection against excess load
Automatic battery test (daily, weekly, monthly)
Charging time (to 90 % rated capacity)
5h
Communication
Interfaces (dual monitoring)
RS232, USB, communication slot (can be used parallel with RS232 / USB),
input contact for emergency power off
Shutdown software (on CD)
5 network licenses for all common OS (e.g. Windows, Linux, Mac, Unix)
User interface / failure indication
(acoustic /visual)
3 LED’s with traffic light display, detailed indication via LCD display
(alarms: at mains failure, overload, battery charging, battery replacement, fan fault
data logger – with clear text display incl. Date and time history)
General data
Efficiency (ECO mode)
>93 %
>94 %
Efficiency at nominal load (double conversion mode)
>87%
>88 %
Audible noise (1 m distance)
≤44 dB(A)
≤49 dB(A)
with intelligent fan speed control and fan monitoring
Temperature range
0 – 45 %
Humidity
0 – 95 % (no condensation)
Operation altitude
Up to 1000 m at nominal load
EMC conformity
EN 62040-2 Class C1, EN 61000-3-2, EN 61000-3-3
Product safety
EN 62040-1
Mains input
Number of outputs
IEC 320 C14
4 x IEC 320 C13
IEC 320 C20
6 x IEC 320 C13
4 x IEC 320 C13
1 x IEC 320 C19 + terminal
Equipment color
Dimensions approx. W x H x D (mm) UPS
Blackline with silver colored front cover
145 x 220 x 400
Dimensions approx. W x H x D (mm) battery
190 x 345 x 460
Integrated (additional battery pack same dimensions as UPS)
Weight approx. UPS
13 kg
31 kg
Weight approx. battery
19 kg
52 kg
Shipment
Conformity
Mains input cord, 2 device cords, communication cable (USB), management software
“CompuWatch” (CD), incl. 5 network licences, operating instructions
CE
* excl. ECO / Bypass mode
22
Protect C.
6000 /10000
High-performance
UPS system for
IT applications
Thanks to genuine VFI
technology (online / double
conversion), Protect C
is suitable for all critical
business applications.
The proven VFI topology of
Protect C protects against all
network problems as a matter
of principle. A sinus-shaped
power feed is achieved under
all load conditions at the input.
Protect C
Autonomy time (full / half-load) (min.)
6000 VA
10000 VA
Default autonomy time
8/26
5/16
1 additional battery module
26/67
16/42
2 additional battery modules
47/112
27/60
3 additional battery modules
67/157
42/97
4 additional battery modules
94/203
53/118
Autonomy time – battery units resemble UPS
Cooling
fans RS232
Maximum control
The bar displays for UPS load
and battery capacity, as well
as the clear pictogram of the
system components provide
information on the essential
operating conditions.
Data is transmitted through
an RS232 interface. With an
optional SNMP (PRO) adapter,
remote monitoring via a web
browser and multi-server
shutdown are possible.
The special AEG shutdown
software “CompuWatch”
is of course included.
Switchable in parallel
Communication slot for
optional communication cards:
SNMP, remote panel and
potential free contacts
Port for
parallel operation
Port unit for external
battery module(s)
Network input security device
Manual
bypass switch
Connector clamps for network
in and output, additional clamp
pair for the setting of individual
or parallel operation
Protect C. 10000 – rear view
Highly integrated switches
and a robust IGBT module
reduce the number of electrical
connections and components
and therefore provide for
increased reliability. A Static
Bypass Switch (SBS) and /
or an automated bypass
ensure additional safety
in case of overload.
Protect C. 6000 and C. 10000
offer the possibility of parallel
operation. Both active
redundancy and higher
availability are achieved with
higher power requirements
being taken into account.
Also, the combination of power
increase and active redundancy
is possible, as up to 3 devices
can be switched in parallel.
Protect C meets the highest
security and availability
requirements and allows for an
economical implementation.
Main characteristics
•VFI topology (online / double
conversion) protects against
all network problems
•Micro processor control / digital signal processors
for maximum availability
•Sinus-shaped power feed
(high-frequency pulse width
modulation with IGBTs)
•n+x technology for
redundancy and
performance increase
•Extension slot for SNMP,
potential-free contacts,
remote panel
•Also available as an
S-version with reinforced
charging rectifier
•Space saving design with
integrated battery system
•Integrated fault operation
security for manual
bypass switch
23
Classification VFI SS 111 acc. to IEC 62040-3
C. 6000
C. 10000
Power type rating
6000 VA
10000 VA
4200 W
7000 W
Parallel connection
Parallel connection
600 000 5877
600 000 5878
Part number (battery pack)
600 000 5879
600 000 5880
Part number (UPS S–version)
600 000 4340
600 000 4341
Part number
(UPS including integrated battery system)
UPS input
Input voltage
220 VAC / 230 VAC / 240 VAC
Voltage range without battery mode
176 – 276 VAC
Frequency (auto selection)
50 Hz / 60 Hz ±4 Hz
λ ≥0.98
Mains current (system reaction)
Current consumption at nominal load (max.)
31 A
50 A
UPS output
Rated output voltage (adjustable)
220 VAC / 230 VAC (default) / 240 VAC ±1 %
Frequency in battery mode
Output current (at 230 VAC)
50 Hz / 60 Hz ±0.1 %
26 A
Transfer time at mains outage
43.4 A
0 ms (without interruption)
Voltage waveform
Sinusoidal, distortion THD <4 %
Overload response (online operation)
<130 % for 10 min. / 130 % for 1 s
Subsequent, transfer to bypass mode
Crest factor
3:1
Short circuit response
Short circuit proof (3 x IN for 140 ms)
Battery
Type
Sealed, maintenance free, integrated (proprietary brand)
Rated voltage (linked)
240 VDC
Overload / deep discharge protection
Yes
Charging time (to 90 % rated capacity)
7h
Communication
Interfaces
Shutdown software (on CD)
Failure indicators (acoustic /visual)
RS232 (with status display and data), communications slot for SNMP, potential free relay contact
5 network licenses for all common OS (e.g. Windows, Linux, Mac)
LED display for UPS summary / battery capacity display, status display
Indicators for mains failure, overload, battery charging, battery replacement, failure
General data
Efficiency AC – AC (at nominal load)
≥90 %
Audible noise (1 m distance)
<55 dB(A)
Operating temperature range
0° – 40 °C
Humidity
0 – 90 % (without condensation)
Operation altitude
Up to 1000 m at nominal load
EMC conformity
EN 62040-2 Class C3
Product safety
EN 62040-1
Mains input
Secured terminal block
Consumer outputs
Secured terminal block
Equipment color
Blackline with silver colored front cover
Dimensions approx. W x H x D (mm) UPS
Dimensions approx. W x H x D (mm) battery
260 x 720 x 570
Integrated (not S-version battery pack same dimensions as UPS)
Weight approx. UPS
90 kg
93 kg
Weight approx. battery
65 kg
68 kg
Shipment
Conformity
Parallel connection cable, management software “CompuWatch” (CD),
communications cable, operating instructions
CE
24
Protect D
Extension slot
Locking outputs
Easy battery replacement
Efficient
high-performance
UPS for rack use
With a high power factor
of 0.9lag the Protect D
series exceeds the power of
conventional UPS systems by
20 %. Efficiency is significantly
increased during normal
operation as well as in the
energy-efficient ECO and
ECO+ operating modes.
Compact and flexible
The height of the UPS
electronics and battery
together is only 2 U. With
the flap front cover, battery
replacement is very easy.
Display of current UPS mode
Display of
UPS input
Display
of UPS
output
Indicator
UPS mode
•Advanced battery charging
technology for maximum
durability of the battery
Secure and easy to use
An innovative locking
mechanism at the UPS
outputs prevents accidental
separation of the loads.
•Hot-swappable batteries,
easy replacement
through hinged front
The multilingual graphic
screen is very easy to read,
even from a longer distance,
thanks to its large format.
Together with three LEDs at
the top, it displays the essential
operating conditions. The UPS
can be directly administered
with the control panel.
The autonomy times
can be increased with
additional battery packs;
connected battery packs are
automatically detected.
A real-time event logger
ensures careful observation
and analysis of events as
they occur. In addition, a
regular automated battery
test can be planned.
All batteries can be replaced
during operation (hotswappable). Our advanced
battery charging technology
allows for short charging
times and battery-preserving
charging characteristics
at the same time.
Main characteristics
Many interfaces (RS232 / USB / Slot / EPO) as well as a
potential-free contact within
the series ensure outstanding
communication capacity.
•Increased efficiency through
the ECO and ECO+ mode
•Additional battery packs
for easy scaling of the
autonomy times
•Extension slot for
communication cards,
communication in parallel
is possible through the
RS232 / USB interface
and SNMP
•Low height (2 U) including
integrated batteries
•Switchable UPS outputs with
innovative locking mechanism
•Display of the UPS
parameters on a
graphic LCD, direct
configuration is possible
with the control panel
•VFI topology (online /double
conversion) protects against
all network problems
•Freely programmable
potential-free contact plus
emergency shutdown contact
•An increase of the available
performance by approx. 20 %
through a 0.9lag power factor
•May also be used as a
frequency converter
Control panel
Protect D – LCD & control panel
4 x IEC 320 C13 outputs
Cooling
EPO fan
USB & RS232
communication ports
Network
input
2 x 2 switchable
IEC 320 C13 outputs
Protect D. 2000 – rear view
Potential-free
contact
Extension slot for
communication cards
protect D
(cos j = 0.7lag)
Autonomy time (full / half-load) (min.)
3000 VA
1000 VA
1500 VA
2000 VA
Default autonomy time
9/24
8/18
10/21
6/14
1 additional battery module
35/71
31/65
37/77
24/51
2 additional battery modules
63/130
56/119
67/141
44/92
3 additional battery modules
94/194
83/178
99/210
64/137
4 additional battery modules
126/261
112/240
134/283
87/185
Autonomy time – battery units resemble UPS
25
Classification VFI SS 111* acc. to IEC 62040-3
D. 1000
D. 1500
D. 2000
D. 3000
Power type rating
1000 VA
1500 VA
2000 VA
3000 VA
900 W
1350 W
1800 W
2700 W
Part number
(UPS including integrated battery system)
600 000 8434
600 000 8436
600 000 8437
600 000 8438
Part number (additional battery pack)
600 000 8441
600 000 8442
600 000 8443
UPS input
Input voltage
220 VAC / 230 VAC / 240 VAC
Voltage range without battery mode
(load dependent)
120 – 276 VAC
140 – 276 VAC
Frequency (auto selection)
50 Hz / 60 Hz ± 5 Hz
λ ≥0.99 (THDi ≤8 %)
Mains current (system reaction)
Current consumption at nominal load (max.)
4.8 A
7.2 A
9.6 A
13.7 A
UPS output
Rated output voltage (adjustable)
200 VAC / 208 VAC / 220 VAC / 230 VAC (default) / 240 VAC ±2%
Frequency in battery- / frequency converter mode
Output current (at 230 VAC)
50 Hz / 60 Hz ±0.25 Hz
4.3 A
6.5 A
Transfer time at mains outage
8.7 A
13 A
0 ms (without interruption)
Voltage waveform
Sinusoidal, distortion THD <3 %
Overload response (double conversion mode)
<130 % for 5 min. / 130 % – 150 % for 15 s
Overload response (battery mode)
<130 % for 12 s / 130 % – 150 % for 2 s
Crest factor
3:1
Short circuit response
Short circuit proof (4 x IN for 100 ms)
Battery
Type
Rated voltage (linked)
Sealed, maintenance free (proprietary brand), integrated, hot swappable
36 VDC
48 VDC
Battery management
72 VDC
Temperature compensated with discharge protection,
automatic battery test (programmable) and battery pack detection
Charging time (to 90 % rated capacity)
3h
Communication
Interfaces (dual monitoring)
RS232, USB, communication slot (can be used parallel with RS232 / USB),
input contact for emergency shutdown, programmable potential free contact
Shutdown software (on CD)
5 network licenses for all common OS (e.g. Windows, Linux, Mac, Unix, Sun etc.)
Failure indicators (acoustic /visual)
3 LED’s with traffic light display, detailed indication via LCD display
(alarms: at mains failure, overload, battery charging, battery replacement, fan fault,
data logger – with clear text display incl. date and time history)
General data
Efficiency (ECO+ mode)
Efficiency at nominal load
(double conversion mode)
Audible noise (1 m distance)
>95 %
>98 %
≥88 %
>88 %
<44 dB(A)
< 45 dB(A)
Operating temperature range
>89 %
≥90 %
<52 dB(A)
0°– 40 °C
Humidity
0 – 95 % (without condensation)
Operation altitude
Up to 3000 m at nominal load
EMC conformity
EN 62040-2 Class C1, EN 61000-3-2, EN 61000-3-3
Product safety
EN 62040-1
Mains input
IEC 320 C14
Number of outputs (switchable)
automatically locked
IEC 320 C20
6 x IEC 320 C13 (2+2)
Housing
8 x IEC 320 C13 (2+2)
6 x IEC 320 C13 (3+3)
+ 1 x IEC 320 C19
Blackline metal case with aluminum front
Dimensions approx. W x H x D (mm) UPS
482.6 (19") x 88 (2 U) x 430
Dimensions approx. W x H x D (mm) battery
482.6 (19") x 88 (2 U) x 430
482.6 (19") x 88 (2 U) x 600
482.6 (19") x 88 (2 U) x 600
Weight approx. UPS incl. integrated battery
16 kg
19.5 kg
19 kg
29.5 kg
Weight approx. battery extension unit
23 kg
28 kg
41 kg
41 kg
Shipment
Mains input cord, UPS management software “CompuWatch” (CD),
communications cables (RS232 & USB), operating instructions, rack rails,
device cables: 3 x IEC 320 C13 (D. 1000 – D. 2000), 3 x IEC 320 C13 +1 x IEC 320 C19 (D. 3000)
Conformity
CE
*excl. ECO/Bypass mode usage
26
Protect D.
6000 /10000
Top performance
in rack format
Protect D. 6000 and D. 10000
compliment the range of the
successful Protect D series.
With Protect D. 10000, a power
level of 10 kVA in rack design
is available for the first time.
Protect D. 6000 and
Protect D. 10000 have the
same advantages and
characteristics as the smaller
models, including the high
power factor of 0.9lag.
Compact housing dimensions
Thanks to their compact
design, the devices can also
be used in IT cabinets with
a depth of only 800 mm.
Protect D. 6000 including
battery, connection unit and
manual bypass unit fits within
3 standard height units. The
10 kVA version, with a complete
battery system, connection
unit and integrated manual
maintenance bypass fits within
5 standard height units.
The weight is unimportant as
the batteries can be mounted
at the end of the installation.
Special characteristics
Flexible and
maintenance friendly
•High power density in
a compact housing
The equipment offers separate
feed for the rectifiers and
bypass, Protect D. 6000 and
10000 can also be operated
with only one feed. Both
options are provided to deliver
highest flexibility and security.
To increase power or to be
able to serve the demand for
active redundancy, Protect
D. 6000 and Protect D. 10000
are prepared for parallel
operation.
•Suitable for IT cabinets
with a depth of 800 mm
•Very easy assembly through
removable connection
unit and batteries with
plug-in technology
•Dual or single input
•Prepared for parallel
operation
•Integrated manual
maintenance bypass
(foolproof operation)
In order to ease maintenance
work, a manual bypass is
already integrated into the
removable connection unit.
The sophisticated design with
removable connection unit and
battery systems with plug-in
technology make the assembly
in the rack and the electrical
installation as easy as possible.
Protect D. 10000 – rear view: flexible, removable connection unit with manual
bypass and integrated IEC output distribution with automated locking mechanism
protect D
(cos j = 0.7lag)
Protect D. 6000 with open battery compartment
Autonomy time (full / half-load) (min.)
6000 VA
10000 VA
Default autonomy time
5/13
5.5/10.5
1 additional battery module
15/39
12/25
2 additional battery modules
26/67
20/41
3 additional battery modules
38/98
28/59
4 additional battery modules
51/132
36/78
Autonomy time – battery units resemble UPS
27
Classification VFI SS 111 acc. to IEC 62040-3
D. 6000
D. 10000
Power type rating (Ready for redundant or
increased performance parallel operation)
6000 VA
10000 VA
5400 W
9000 W
Part number
(UPS incl. internal battery system)
600 000 8439
600 000 8440
Part number (additional battery pack)
600 001 1042
600 001 1044
UPS input
Input voltage
220 VAC / 230 VAC / 240 VAC
Voltage range without battery mode
176 VAC (120 VAC to 50 % utilization) – 276 VAC
Voltage range bypass input
184 – 264 VAC
Frequency (auto selection)
50 Hz / 60 Hz ±10 %
λ ≥0.99 (THDi <5 %)
Mains current (system reaction)
Current consumption at nominal load (max.)
29 A
47 A
UPS output
Rated output voltage (adjustable)
200 VAC / 208 VAC / 220 VAC / 230 VAC (default) / 240 VAC ±1%
Frequency in battery / frequency converter mode
Output current (at 230 VAC)
50 Hz / 60 Hz ±0.5 %
26 A
43.4 A
Transfer time at mains outage
0 ms (without interruption)
Voltage waveform
Overload response (double conversion mode)
Sinusoidal, distortion THD <2 %
<130 % for 2 min. / 130 – 150 % for 30 s, then automatically switches over to electronic bypass: 0 ms
Crest factor
3:1
Short circuit response
Short circuit proof (3 x IN for 100 ms)
Battery
Type
Rated voltage (linked)
Battery management
Sealed, maintenance free (proprietary brand), integrated, hot swappable
180 VDC
240 VDC
Temperature compensated with discharge protection,
automatic battery test (programmable) and battery pack detection
Charging time (to 90 % rated capacity)
3h
Communication
Interfaces (dual monitoring)
RS232, USB, communication slot (can be used parallel with RS232 / USB),
input contact for emergency shutdown, programmable potential free contact
Shutdown software (on CD)
5 network licenses for all common OS (e.g. Windows, Linux, Mac, Unix, Sun etc.)
Failure indicators (acoustic /visual)
3 LED’s with traffic light display, detailed indication via LCD display
(alarms: at mains failure, overload, battery charging, battery replacement, fan fault,
data logger – with clear text display incl. date and time history)
General data
Efficiency (ECO mode)
>96 %
>97 %
Efficiency at nominal load
(double conversion mode)
>92 %
>93 %
Audible noise (1 m distance)
<55 dB(A)
Operating temperature range
0° – 40°C
Humidity
0 – 95 % (without condensation)
Operation altitude
Up to 1000 m at nominal load
EMC conformity
EN 62010-2 Class C2
Product safety
AC input
Number of outputs automatically locked
EN 62040-1
Permanent connection via terminals, separate power option from rectifier and bypass
connector unit with removable integrated manual bypass (for installation or subsequent maintenance of UPS)
with optional cable entry from top or rear
1 x fixed connection on terminal block plus
2 x IEC 320 C13, 1 x IEC 320 C19
Housing
Dimensions approx. W x H x D (mm)
without front panel
1 x fixed connection on terminal block plus
4 x IEC 320 C19
Metal casing, blackline with aluminum cabinet front
48.6 (19") x 132 (3 U) x 715
depth with front panel plus 35 mm
Dimensions approx. W x H x D (mm)
battery extension unit incl. front panel
48.6 (19") x 220 (5 U) x 715
depth with front panel plus 35 mm
482.6 (19") x 132 (3 U) x 595
Weight approx. without batteries
20 kg
32.5 kg
Weight approx. with batteries
46 kg
82.5 kg
44.5 kg
63 kg
Weight approx. battery extension unit
Shipment
Conformity
Rack rails kit, 16 A IEC device cable, UPS management software “CompuWatch” (CD)
incl. 5 network licenses, RS232 and USB cable, operating instructions
CE
28
Protect 1
Online UPS systems
for networks and
data centers
Protect 1 offers you a highpower UPS system for all critical
business applications. Among
other fields of use, Protect 1
is suitable for networks, data
centers, cash desk systems
or building technology.
With the extension slot,
devices such as SNMP (PRO)
adapter cards or potential-free
contacts can be retrofitted.
This supports remote
monitoring via web browser
and multi-server shutdown.
The VFI topology of Protect 1
protects reliably against
all network problems.
The special AEG shutdown
software “CompuWatch”
is included.
Switchable in parallel
Main characteristics
A compact parallel switch
panel ensures the flexible
and easy development
of a parallel system.
•VFI topology (online /double
conversion) protects against
all network problems
•Static bypass switch
(SBS) and foolproof
maintenance bypass
Up to 3 devices can be
switched in parallel. Hence, a
power increase up to 60 kVA
is possible in addition to
the combination of power
improvement and redundancy.
•10, 15 or 20 kVA with spaceefficient, modern design
The clearly structured screen
provides detailed information
on all important operating
conditions and events.
Expansion slot
Cooling
fans
Parallel port
RS232
•Performance increase up
to 60 kVA through parallel
operation of up to 3 devices
Input
fuse
•RS232 interface,
extension slot e.g. for
SNMP adapter card
Data is transmitted through
an RS232 interface.
Manual
bypass
Connector
clamps
with cable
clamping unit
LV main distributor
UPS feed
Protect 1.200 – rear view
Protect 1
Coupled
battery cabinets
Protect 1 during parallel operation
•State-of-the-art technology
for maximum reliability
(DSP, CAN-Bus) and
maximum efficiency
(high-frequency IGBT)
•n+x technology for active
redundancy and /or
performance increase
Control and monitoring
Parallel field / manual bypass
plus UPS sub-distributor
•Battery systems with an
expected lifespan of
10 – 12 years, according to
EUROBAT, are available
Autonomy time (full / half-load) (min.)
Protect 1.100
Protect 1.150
Protect 1.200
1 x Protect 1.100 BP
16/42
-
-
2 x Protect 1.100 BP
42/97
-
-
3 x Protect 1.100 BP
60/134
-
-
1 x Protect 1. BP 20
19/47
10/29
6/19
2 x Protect 1. BP 20
47/103
29/68
19/47
3 x Protect 1. BP 20
78/177
47/103
34/62
4 x Protect 1. BP 20
103/243
68/153
47/103
5 x Protect 1. BP 20
138/312
85/202
63/138
Autonomy times – battery cabinets resemble UPS
Port “plug & play” with
battery connection wire protected
against polarity reversal
Battery cabinets, pre-assembled
and ready to be connected
Protect 1. BP 20
Period of use of the integrated
rechargeable batteries:
10 – 12 years according to
EUROBAT
29
Classification VFI SS 111 acc. to IEC 62040-3
Protect 1.100
Protect 1.150
Protect 1.200
n+x - technology scalable (parallel switching capacity up to 3 units)
Power type rating
10 kVA
15 kVA
7 kW
10.5 kW
20 kVA
14 kW
Part number (UPS without battery)
600 000 4434
600 000 4435
600 000 4436
Part number (battery pack 1.100 BP)
600 000 5097
Part number (battery pack 1. BP 20)
100 000 1991
100 000 1991
100 000 1991
UPS input
Input voltage
400 / 230 VAC (3 ph~/N/PE)
Voltage range without battery mode
304 – 478 VAC (Bypass: 176 – 261 VAC)
Frequency (automatic selection)
50 Hz / 60 Hz ±4 Hz
Mains current (system reaction)
λ ≥0.95
Current consumption at nominal load (max.)
13 A / 46 A (bypass)
19 A / 68 A (bypass)
25 A / 91 A (bypass)
UPS output
Rated output voltage (adjustable)
220 VAC / 230 VAC (default) / 240 VAC ±1 %
Frequency in battery mode
Output current (at 230 VAC)
50 Hz / 60 Hz ±0.1 %
43.4 A
65.2 A
Transfer time at mains outage
86.9 A
0 ms (without interruption)
Voltage waveform
Sinusoidal, distortion THD <2 %
Overload response
<130 % for 10 min. / 130 % for 1 s,
then automatic transfer to bypass mode: 0 ms (without interruption)
Crest factor
3:1
Short circuit response
Short circuit proof (2.5 x IN for 100 ms)
Battery
Rated voltage (linked)
Charging characteristics
240 VDC
IU – characteristic curve (charging voltage 274 VDC / charging current max. 4.2 A)
Autonomy time
Expandable with external battery modules
Overload / deep discharge protection
Yes
Communication
Interfaces
Shutdown software (on CD)
RS232 (with status display and data values)
Communication slot (for potential free contact, SNMP)
5 network licenses for all common OS (e.g. Windows, Linux, Mac, Unix, Sun etc.)
Failure indicators (acoustic /visual)
Mains failure, overload, battery charging, battery replacement, failure
LED bar graph for summary / battery capacity
General data
Efficiency AC – AC (at nominal load)
Audible noise (1 m distance)
>90 %
<55 dB(A)
Operating temperature range
Humidity
0 – 95 % (without condensation)
Operation altitude
Up to 1000 m at nominal load
EMC conformity
EN 62040-2 Class C3
Product safety
EN 62040-1
Equipment color
Blackline with silver colored front cover
Dimensions approx. W x H x D (mm) UPS
Dimensions approx. W x H x D (mm)
battery extension unit
Weight approx. UPS
Weight approx. battery extension unit
260 x 720 x 670 plus interception unit (90)
260 x 720 x 670
(Protect 1.100 BP)
260 x 720 x 810
(Protect 1. BP 20)
260 x 720 x 810
(Protect 1. BP 20)
260 x 720 x 810
(Protect 1. BP 20)
39 kg
55 kg
55 kg
170 kg
(Protect 1. BP 20)
170 kg
(Protect 1. BP 20)
135 kg
(Protect 1.100 BP)
170 kg
(Protect 1. BP 20)
Shipment
Conformity
<60 dB(A)
0° – 40 °C
Parallel connection cable, communication cable,
UPS management software “CompuWatch” (CD), operating instructions
CE
30
Protect 1.M
Front view with swappable module unit
technology
Modular
high-performance
UPS for the IT sector
Protect 1.M is a UPS
system with maximum
reliability and power.
In this way, you can perform
system extensions during
runtime.
The VFI topology of
Protect 1.M protects its
systems reliably against
all network problems.
Each individual module is
a separate UPS and works
independently of a central
control mechanism.
Modular structure
Intelligent control
and monitoring
The compact module structure
of Protect 1.M allows you
to flexibly upgrade the UPS
power up to 24 kVA. The
individual 4 kVA modules are
hot-swappable, connected
modules are automatically
detected.
The powerful communication
module of Protect 1.M
collects the information of the
self-sufficient UPS modules.
The clearly designed screen
informs you about all important
operating conditions.
n+x Technology – level of redundancy
Expansion slot for relay card with
potential-free contacts or SNMP card
Load
Number of UPS modules
1 module
4 kVA
no
redundancy
8 kVA
RS485
2 modules 3 modules 4 modules 5 modules 6 modules
n+1
(4 kVA)
n+2
(8 kVA)
n+3
(12 kVA)
n+4
(16 kVA)
n+5
(20 kVA)
no
redundancy
n+1
(4 kVA)
n+2
(8 kVA)
n+3
(12 kVA)
n+4
(16 kVA)
no
redundancy
n+1
(4 kVA)
n+2
(8 kVA)
n+3
(12 kVA)
no
redundancy
n+1
(4 kVA)
n+2
(8 kVA)
no
redundancy
n+1
(4 kVA)
12 kVA
RS485
RS232
16 kVA
20 kVA
24 kVA
Dual monitoring interface
no
redundancy
classification of the battery cabinets available ex warehouse – in the protect 1.M range
15 min.
20 min.
30 min.
40 min.
60 min.
75 min.
90 min.
4 kVA
-
-
-
1 x 1.M BP28
1 x 1.M BP42
-
1 x 1.M BP56
8 kVA
1 x 1.M BP28
-
1 x 1.M BP42
1 x 1.M BP56
1 x 1.M BP84
2 x 1.M BP65
1 x 1.M BP84
12 kVA
1 x 1.M BP42
1 x 1.M BP65
-
1 x 1.M BP84
2 x 1.M BP65
-
3 x 1.M BP65
16 kVA
1 x 1.M BP56
-
1 x 1.M BP84
1 x 1.M BP84
2 x 1.M BP84
3 x 1.M BP65
4 x 1.M BP65
20 kVA
-
1 x 1.M BP84
1 x 1.M BP84
3 x 1.M BP65
2 x 1.M BP84
4 x 1.M BP65
5 x 1.M BP65
5 x 1.M BP65
6 x 1.M BP65
1 x 1.M BP42
1 x 1.M BP42
1 x 1.M BP42
24 kVA
1 x 1.M BP84
2 x 1.M BP65
1 x 1.M BP84
1 x 1.M BP42
Further versions available upon request
1 x 1.M BP42
2 x 1.M BP84
4 x 1.M BP65
You can also retrieve and
control all technical parameters
with the included AEG
software “CompuWatch”.
Main characteristics
•High power reserves
through a total performance
of max. 24 kVA
•Wide security margins
through n+x technology
•Static bypass switch
(SBS) and foolproof
maintenance bypass
•3 or 1-phase connection
of the entire installation
with an automated
detector, 1-phase output
•Long autonomy periods
available in case of
power failure
•Battery cabinets in the
Protect 1.M range supplied
with 10 to 12 year battery
life according to EUROBAT
•Intelligent battery
management
•Hot-swappable module
for easy replacement
during operation
•Module structure to be
plugged into a compact
tower, assembly in
19" rack possible
•Communication module
with LCD, “Dual Monitoring”
interface with expansion slot
31
Classification VFI SS 111 acc. to IEC 62040-3
Power type rating
Protect 1.040
Protect 1.M
UPS Module
System cabinet (max. 6 x 4 kVA)
4 kVA
24 kVA
2.8 kW
16.8 kW
n+x technology
Part number
600 000 3928
600 000 3930
UPS input
Input voltage
(auto. detection)
230 VAC (1 ph~/N/PE) or 400 / 230 VAC (3 ph~/N/PE)
Voltage range without battery mode
160 – 300 VAC (1 ph~) or 277 – 520 VAC (3 ph~)
Frequency
Current consumption (max.)
50 Hz / 60 Hz ±4 Hz
22 A (1 ph~) or 7.3 A (3 ph~)
132 A (1 ph~) or 44 A (3 ph~)
λ ≥0.98
Power factor
UPS output
Rated output voltage (adjustable)
220 VAC / 230 VAC / 240 VAC ±2 %
Frequency in battery mode
Output current
50 Hz / 60 Hz ±0.2 Hz
17.4 A
Transfer time at mains outage
Voltage waveform
Overload response (online mode)
104.4 A
0 ms (without interruption)
Sinusoidal, distortion THD <3 %
125 % for 30 s / 130 % for 2 s,
then automatic transfer to bypass mode: 0 ms (without interruption)
Crest factor
3:1
Short circuit response
Short circuit proof (3 x IN for 100 ms)
Battery
Rated voltage (linked)
Charging characteristics
Autonomy time
120 VDC
IU – characteristic curve (charging voltage 137 VDC / charging current max. 3.5 A/ module)
Freely selectable and expandable with external battery modules
(available modules with 28, 42 or 65 Ah)
Service life: 10 – 12 years acc. to EUROBAT
Overload / deep discharge protection
Yes
Communication
Interfaces (dual monitoring)
RS232 / RS485 (with status display and data values)
communication slot (for potential free contacts, SNMP)
Shutdown software (on CD)
5 network licenses for all common OS (e.g. Windows, Linux, Mac, Unix, Sun etc.)
Failure indicators (acoustic /visual)
Graphical LCD display with digital display of the input and
output parameters (voltage, frequency, capacity etc.), battery parameters
incl. password protected detailed failure diagnostics,
LED display for status notification / central failure display
General data
Efficiency AC – AC (at nominal load)
Audible noise (1 m distance)
Operating temperature range
Humidity
Operation altitude
EMC conformity
Product safety
>89 %
>88 %
<55 dB (A)
<62 dB(A)
0° – 40 °C
20 % – 90 %
Up to 1000 m at nominal load
EN 62040-2 Class C3
EN 62040-1
Mains input
Secured terminal block
Consumer outputs
Secured terminal block
Equipment color
Dimensions approx. W x H x D (mm) UPS
Dimensions approx. W x H x D (mm)
battery extension unit
Weight approx. UPS
Weight approx. battery cabinet
Shipment
Conformity
Blackline
442 x 965 x 700 (chassis) / module each: 405 x 87 x 530
442 x 965 x 700
75 kg (chassis) + 15 kg per module
1.M BP28: 160 kg, 1.M BP42: 200 kg, 1.M BP56: 255 kg, 1.M BP65: 270 kg, 1.M BP84: 335 kg
Communications cable, UPS management- software “CompuWatch” (CD), operating instructions
CE
32
remote panel,
distribution
units
Extensions and
accessories
Remote Panel
remote monitoring
unit for professional
data center
management
The remote signal table
displays the UPS operating
status in real time at a remote
monitoring site.
In addition, a bar display
informs about the current
UPS capacity utilization and /
or in the emergency power
operating mode about the
remaining available capacity.
An acoustic alarm, which can
be deactivated, completes the
optical display.
The Remote Panel is available
for Protect C, Protect D,
Protect 1 and Protect 1.M
The remote monitoring unit
can be installed at a distance
of up to 500 m from the UPS
being monitored.
Part number
•Remote Panel:
600 000 5881
Data transmission and voltage
supply of the remote signal
panel are ensured with a
conventional patch cable.
Remote Panel
Distribution bars
for professional
data centers
The distribution bar enables
you to distribute the UPS
outputs among several
loads. Different versions
support the load connection
via Schuko or non-heating
sockets (IEC 320 C13 & C19).
Depending on the connection
type, the ports are protected
against overload – centrally
or in pairs. This ensures
an extremely effective
fulfillment of selected criteria
in accordance with specific
shutdown conditions.
the distribution bars are
flexibly installed in default
rack systems. The fastening
brackets can be removed
for on-table operation and
therefore enable flexible use.
Part numbers
Thanks to the robust aluminum
housing, the PDU distribution
bars are torsion-resistant and
extremely durable.
•PDU 16 -1: 600 000 6830
LEDs display the current
operating status of the
distribution bar. With the
pluggable fastening brackets,
Sub-distributions
•IEC Distribution Bar:
600 000 9254
•PDU 10 -1: 600 000 6829
•PDU 10 -2: 600 000 6831
•PDU 16 -2: 600 000 6832
33
Manual
Bypass Switch,
Power
Distribution Box
Manual Bypass Switch
Power Distribution Box
Manual Bypass Switch
unit for maintenance
works and tests
The external manual bypass
switch for the series Protect A,
B.PRO, C, D, 1 and 1.M is used
to disconnect the UPS for
maintenance works allowing
uninterrupted, continuous
feed of the connected loads.
Besides the sheer bypass
operation, the manual bypass
switch also enables a UPS
test run. Non-heat device
sockets in the output of the
smaller devices enable direct
feeding of the loads. Space
for a separate, complete
sub-distributor is provided
by MBS 24000. The external
manual bypass unit supports
3 operating modes:
1. UPS mode: the loads
are fed through the UPS
2. Service mode: the loads
are directly fed by the power
supply system. A UPS test can
be run at the same time.
3. Bypass operation: the loads
are directly fed by the power
supply system. The connected
UPS is completely separated
from the circuit and can be
removed for maintenance
and replacement works.
Part numbers
•MBS 2000: 600 000 3039
•MBS 3000: 600 000 3040
•MBS 6000: 600 000 5205
•MBS 10000: 600 000 7684
•MBS 24000: 100 000 2021
Power
Distribution Box,
parallel switch panel,
manual bypass and
distributor panel
The compact parallel
switch panel enables the
development of a parallel
system without modifying
the existing low voltage
distribution system. Through
the output distribution with up
to 24 separately protected and
pre-configured circuits, which
can be partially integrated
in the parallel switch panel,
modification of the subdistribution circuit is no longer
required.
The panel enables parallel
switching of the devices to
increase power and /or to
achieve redundancy. Each UPS
device can be disconnected
from the power supply
system and also from the
safe bar facing the output
without interrupting the
voltage supply of the loads.
With the integrated manual
bypass switch, the complete
UPS parallel system can
be disconnected, e.g. for
maintenance works. In this
case, the loads are fed
without interruption.
Part numbers
•PDB Protect C: 100 000 1852
•PDB Protect D: 600 001 2436
•PDB Protect 1: 100 000 1853
34
SNMP
(PRO / mini) Card,
Environment
Manager
SNMP (PRO / mini) card
Environment Manager
SNMP
(PRO / mini) card
Network-based
UPS management
Environment Manager
Management unit for
several environmental
sensors
SNMP adapters are
communication extensions
for the UPS series starting
from Protect B. PRO. All
versions support monitoring
of UPS devices via the web.
If needed, a phased shutdown
of all relevant servers in the
network is possible. Via Wakeup-on-LAN, the servers can
be re-activated. This enables
an automated shutdown and
reboot of the system. The
UPS can also be configured
and monitored by network
management software with
the integrated SNMP agent
according to RFC1628.
The PRO and mini version
of the SNMP adapter further
enables the integration of
features such as area access
control, air condition or
smoke and /or fire detectors.
In addition, temperature and
humidity can be measured
and administered by means
of optical sensors.
The SNMP PRO adapter
enables, among other features,
the connection of an intelligent
load management distributor.
Part numbers
•SNMP adapter:
600 000 4036
•SNMP-PRO adapter:
600 000 1271
•SNMP-mini adapter:
600 000 8668
•Digital temperature
sensor: 800 002 0878
•Digital combi sensor
for temperature and
humidity: 800 002 2493
•External relay board:
800 002 5994
•Load management
distributor:
800 000 6684
The Environment Manager
is designed as a system
extension for the SNMPPRO and SNMP-mini
adapter. It is a universally
applicable device for the
administration of sensors. A
total of 8 analog sensor units,
4 digital inputs and 4 digital
outputs can be managed.
Each type of sensor unit
can be connected, e.g.
for temperature, humidity,
pressure, tank level, chemical
concentration or similar
features. The incoming
signal voltages only need
to be within the specified
parameter range: 0 – 10 V for
analog inputs, 30 V 500 mA
for digital in - and outputs.
The digital inputs can, under
normal circumstances, be
configured optionally as
N/O or N/C contacts.
Part number
•Environment Manager:
800 002 2488
35
Building
management,
relay card
Building management
Relay card
Building management
sensors for
environmental data
Relay card
Communication
through potentialfree contacts
With monitoring sensors for
environmental data, you can
upgrade the UPS management
to a complete building
management system for your
data center. All devices are
compact and equipped with
a 5 m RJ12 connection cable.
Acoustic alarm
Signaling through Piezo
buzzer, approx. 85 dB(A)
The relay card is an option
for the UPS series starting
from Protect B. PRO.
Optical alarm
Signaling through
stroboscope light
Temperature sensor
Measurement range:
0 °C – +100 °C, ±1 %
•Temperature sensor:
800 002 2489
It provides potential-free
contacts at the outputs, which
can be configured optionally
as N/O or N/C contacts
and which can be used as
binary input for the SPS or
building control systems.
Combi sensor
Measurement range:
temperature
0 °C – +100 °C, ±1 %
relative humidity
0 – 100 %, ±5 %
Motion sensor
Coverage:
14 m x 14 m, 90°
Smoke sensor
Smoke detector with photocell
Part numbers
•Combi sensor for
temperature and humidity:
800 002 2492
•Motion sensor:
800 002 2494
•Smoke sensor:
800 002 2495
•Piezo alarm:
600 000 7361
•Stroboscope alarm:
600 000 7362
Tapping occurs via a sub-Dslot and, in case of the
programmable PRO design,
via a clamping block designed
for supply voltage potential.
Part numbers
•Relay card mini:
600 000 9252
•Relay card standard:
600 000 3932
•Relay card PRO:
600 000 9253
36
CompuWatch
“CompuWatch“ –
shutdown and
UPS management
software
“CompuWatch” is based on
the TCP/IP network protocol
and can therefore be used
in non-standard networks.
“CompuWatch” allows you
to shut down server and
computer systems with diverse
operating systems safely and
automatically when needed.
Through the intelligent
communication link between
the UPS, the server and the
existing network topology,
information is forwarded by
means of security mechanisms
to all server and computer
systems powered by the
UPS. This is where the
information is processed in
the software modules. Phased
shutdowns are possible if
the software modules on
the respective servers are
configured accordingly.
All “CompuWatch” modules
work as a service and /or
backend process. Individual
procedures can be launched
through shellscript and /or
batch programming.
With the “CompuWatch”
client, a graphical front end for
Microsoft Windows operating
systems, you can monitor and
control all UPS installations
connected to the network. It
is also possible to control the
network using the scheduler.
AEG Power Solutions products
provide you with a complete,
one-stop-shop security
solution for networks:
Main characteristics
•Software in client /
server technology
•Integration in the operating
system as a back end
process or service
•Supports RS232, USB
and network interface
in the UPS devices
•User-friendly, easy installation
and configuration
•Multi-server-shutdown
in standard and nonstandard networks
•Programmable activities
thanks to a scheduling
mechanism
•Password-protected
control functions
•User-friendly front end to
monitor UPS devices, locally
and through the network
•Selectable bar displays
for measured values
•Automated shutdown of
server and computer systems
•Supports the Wake-upon-LAN function for
sequential reboots
•Adaptable shutdown
procedure through shell
script and batch files
•Notification of events by
network message, e-mail
and text message
•Freely configurable
event manager
•Logging of all UPS and
computing events based
on date and time
•Supports the most important
operating systems on
different platforms. The
recent overview can be
found on www.aegps.com
37
Software
UNMS
“UNMS“ –
network management
software for
UPS devices
With the network management
software for UPS devices
“UNMS”, you can easily
monitor and control higher
numbers of UPS systems
in different networks.
The software gives the
administrator an overview over
all installed UPS systems and
informs about the operating
conditions at the individual
sites. This enhances security
and availability. Centralized
administration of the
installation is possible.
If there is a problem in
one of the UPS units, the
“UNMS” software informs
the administrator, optionally
and on request, by network
message, e-mail or text
message.
The administrator can
immediately take appropriate
counter-measures.
•Notification about events by
means of network messages,
e-mails or text messages
The network management
software supports all common
web browsers and gives
administrators the necessary
flexibility to manage larger
networks. UPS status
information, log history
and reports can be viewed
anywhere in the web browser.
•Logging of all events
in a logbook
Main characteristics
•Web-based remote
monitoring of power supply
systems in the network
•Easy administration of
complex power supply
infrastructures
•Graphics for statistical
evaluation
•Customer-specific
adaptations with background
graphics possible
Complete solutions
With the “UNMS” software
for remote administration
in connection with
“CompuWatch”, you can
create a standardized
management system to run
several data centers. The
optional sensors enable you
to also monitor environmental
data and hence to create a
comprehensive solution.
Main characteristics
•Environmental control
with sensors, e.g. for
temperature, humidity,
smoke and motion detectors
Computing center automation
through UPS management
Smoke
sensor
Motion
sensor
Access
control
Hamburg
Berlin
Server
farm
Temperature
sensor
UPS
with SNMP
adapter
SSL
•Completely automated server
management by means of
programmable events
UPS
monitor
Administrator Munich
Network management
software
•Local alarm through actuators
such as alarm lights or
acoustic signaling devices
•Alerts via network messages,
e-mail or text messages
Intranet
Frankfurt
•Secure communication
between UPS and server
through SSL encryption
In case of failure:
alerts via e-mail or
pop-up
38
AEG Power
Solutions
Your power
partner – also
for services
Service for the
compact UPS series
On the basis of our high
standards and decades
of experience, we also
provide affordable, efficient
and fast services.
service in advance for
devices and batteries of
the compact UPS series
(Protect Home / alpha / A /
B. PRO / C / D / 1 / 1.M).
During the first 24 months
after the purchase of new
equipment, we offer a
nationwide replacement
Additional service packages
adapted to the users’ needs
are directly available at the
UPS point of sale. They offer
Pro-Care Garant
Pro-Care Garant PLUS
In addition to the standard
24 month warranty, an
extension to 36 months
is available.
With Pro-Care Garant PLUS,
the warranty is extended to
60 months starting from the
date of purchase.
Please contact your
AEG Power Solutions
represantative if you
are interested.
The option can be acquired
within the first year after
purchase of the equipment
and includes up-front
replacement of the UPS
during the entire warranty
period.
Pro-Care Garant PLUS
is available for the series
Protect C, Protect D,
Protect 1 und Protect 1.M.
optimal cost control during a
period of up to 60 months.
The following service
packages are available:
Pro-Care Start
Commissioning
AEG Power Solutions
provides you with a
professional commissioning
services to ensure that your
system is ready for use.
Our experts commission
your system in accordance
with the relevant norms and
conduct rigorous functional
tests. Thanks to Pro-Care
Start Commissioning,
you will also benefit from
comprehensive protection
covered by the
manufacturer’s warranty.
39
choose
your UPS
NEW Configurator
for 1-phase UPS
solutions
The right UPS
solution is just a
few clicks away!
With the new UPS Configurator
you can quickly find the
right UPS system for your
requirements. The web app
works in all common browsers
and runs on PCs, tablets and
mobile phones.
Bookmark www.aegps.com/
ups-configurator or scan
the QR code.
Besides the basic calculation
based on load and autonomy
time, you can find a futureproof solution with power
reserve and redundancy. Use
the optional filters for form,
technology, connectors
and accessories.
The Configurator shows you
the results for best price, best
value and best performance.
You choose which fits to your
application.
Send the results directly as
an enquiry or contact our
sales team directly from the
app – even on mobile devices.
http://www.aegps.com/ups-configurator
AEG Power Solutions
Approach your local AEG Power Solutions
representative for further support.
Contact details can be found on:
www.aegps.com
AEG PS - Compact UPS - EN - 03/2014 V1 - Technical data in this document does not contain any binding guarantees or warranties. Content only serves for information purposes and can be modified at any time. We will make binding
commitments only upon receipt of concrete enquiries and customer notification of the relevant conditions. Due to the non-binding nature of these terms, we assume liability neither for the accuracy nor completeness of the data provided here.
AEG is a registered trademark used under license from AB Electrolux.
Download PDF

advertising