Full Digital Dip-Pulse Arc Welding Power Supply Arc Welding Solutions Panasonic
Add to my manuals2 Pages
advertisement
experts in productivity
TM
Panasonic Factory Solutions Company of America
Arc Welding Solutions
Full Digital Dip-Pulse Arc Welding Power Supply
Superior Technology
Third generation, industry-proven HM Dip-Pulse™ technology delivers superior welding performance across a variety of materials and metal thicknesses
—a welding platform to build your shop around.
The HM3-350 offers wider process windows, virtually instantaneous, repeatable arc starting and more precise arc control via 32bit processing.
A 4-wheel 2-drive feeder with encoder feedback allows consistent and stable wire feeding with fast ramp up and down capabilities; thereby, enabling fast arc starts/ends & maximum welding performance.
The new operator interface supports both manual or dedicated automation applications with an easyto-use interface.
Direct digital connection to Panasonic’s G2 series arc welding robots provides plug and play capability and unlimited wave form control directly from the robot teach pendant.
Regardless of manual, dedicated automation or robotic applications, the HM3-350 exceeds expectations with superior technology for welding productivity, quality and flexibility.
Features and Benefits
Flexibility — 3 interactive adaptive pulse control methods to accommodate various applications, operator preferences and changes in stick-out.
Quality — Automatic waveform correction, wire feed speed and other pertinent adjustments are standard. In the event of welding over a tack or changes in operator’s stick-out, the unit automatically clears the short without spatter. That means cleaner welds with higher travel speeds, higher deposition rates, reduced smoke and less heat input.
Productivity — A 2 step high current arc start routine utilizing patented impulse starting technology <capacitor discharge at wire touch> ensures a positive arc initiation. Two arc start modes, CV or
Pulse, provide consistent arc starting while minimizing spatter generation.
Simplicity — Easy-to-use manual welding control pendant features include: real-time graphical controller, convenient multi-schedule function, fast installation/set-up time and alarm indication of feed load fluctuation.
Panasonic HM3 Robotic Welding System
Digitally coupled to a Panasonic Arc Welding Robot eliminates the interface box typical on conventional systems. The welder is automatically recognized by the robot. Fine waveform adjustment can be performed through the robot teach pendant — allowing fine adjustment for exotic or difficult welding applications.
G
K
J
I
H
D
B
C
F
E
A Robot/Controller
B Welding Power Source
C Communication Cable
D Encoder Conversion Unit
E Torch
F Safety Holder
A
G Wire Feeder
H Cable Units
I Wire Reel Stand
J Torch Cable Fixing Unit and Power Cable
K Gas Regulator
Dedicated Automation
Welding
Torch
B
F
E
H
I
G
A
System
PLC
D C
A Welding Power Source
B Wire Feeder
C Control Pendant
D Automation I/F Box (0.8m to Control Pendant)
E Control Pendant Extension Cable (3m)
F Feeder Control Cable Extension (5m) (20m maximum)
G Wire Reel Stand (Optional when YW-35DF1 is used)
H Flexible Conduit (3m for .045")
I Connection Harness (10 wires: 8 channel, 2 torch)
J Jig Harness (4 wires) (Main Controller<->Power Source)
J
YD-350HM3YLD
YW-35DF1
YD-00DFS1
YX-CB011YAA
YV-003DE1A
See optional cables
YW-CGF031
TDF50109
User prepared
User prepared
Optional Cables
Control Pendant Extension Cable 3 meter (118.10")
Feeder Control Cable Extension 5 meter (196.850")
Feeder Control Cable Extension 15 meter (590.551")
Feeder Control Cable Extension 20 meter (787.402")
YV-003DE1A
YV-605GB2A
YV-615GB2A
YV-620GB2A
Manual Welding
A
C
D
F G
H
B
A Torch
B Work Ground Cable
C Control Pendant
D Wire Feeder
Power Source
Control Pendant
Wire Feeder
Wire Drive Roll Size (Std)
Wire Feeder Drive Type
Machine Specifications
Input Voltage
Rated Input
Output Current
Output Voltage
Rated Duty Cycle
Applicable Wire Diameter
Dimensions
Weight
E
E Power Cable
F Gas Line
G Feeder Control Cable
H Welding Power Source
YD-350HM3YLD
YD-00DFS1
YW-35DF1
.035"/.045"
2 Driven-2 Idle
230/460V AC ± 10%, Three-phase, 60Hz
20kVA (18kW)
30–350A
12–36V
60%
.030", .035", .040", .045"
15.0" x 20.9" x 27.2"
169 lbs (77kg)
Safety Precaution: Before attempting to use any welding product, always read the manual to ensure correct use.
Panasonic Factory Solutions Company of America
1-888-PANWELD
www.panasonicfa.com
© Copyright 2006 Panasonic Corporation of North America. All rights reserved. The information provided is subject to change without notice.
W022.01
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project