datasheet for 6366 by Pomona Electronics

datasheet for 6366 by Pomona Electronics
Pomona
®
Model 6366
Test Lead Set Probe To
Retractable Sheath
FEATURES:
•Fits most Fluke, Amprobe, H-P, Tektronix, Keithley, Amprobe and Wavetek DMM’s with a retractable
sheath banana jack.
• Probe body incorporates a two step mold process. First step is Polypropylene for probe rigidity. Second
step is Santoprene® rubber for handling comfort, added insulation protection and wire strain relief.
• Probe test leads are designed with over-voltage spike protection of up to 6kV.
• Probe body and banana plugs are molded directly to the wire for robust pull strength.
• Wire is a high strand count silicone wire for extreme flexibility and high temperature resistance.
• The retractable sheath is ideal for connecting to older test equipment without double insulated jacks.
• Banana plug spring is nickel-plated beryllium copper for long insertion life.
• Flexible test leads feature high strand count silcone wire for extreme flexibility and high temperature.
resistance. Banana plugs are double crimped to the wire and the plugs are molded directly to the wire for
added pull strength.
MATERIALS:
Probe Body: Outer Insulation - Santoprene® Rubber, Color: Gray
Inner Insulation – Polypropylene, Color: One Black, One Red, Tip: Nickel plated brass
Wire: 18 AWG, 65x36 Tinned Copper Stand, Silicone Insulation, Length: 48”122cm),O.D..144”(3,66mm)
Color: One Black, One Red
Retractable Sheath Banana Plug:
Plug Body: Brass, Nickel Plated
Banana Spring: Beryllium Copper, Nickel Plated
Compression Spring: Stainless Steel
Tip: Nylon, Color Matches Color of Wire
Insulation: Polypropylene Molded to the Plug and Wire. Color Matches Color of Wire.
RATINGS:
IEC 1010-2-031, Category III, P2 Compliant
Operating Voltage: 1000V, Current: 10 Amperes,
Operating Temperature: +55° C (+131° F) Max.
ORDERING INFORMATION: Model 6366
6
USA: Sales: 800-490-2361
Technical Support: [email protected]
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150
International: 425-446-5500
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm),
.xxx = ± .005” (.127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement