AVANTI WIND TURBINE LADDER

AVANTI WIND TURBINE LADDER
AVANTI WIND TURBINE LADDER
AVANTI WIND SYSTEMS A/S
Hillerød - Denmark
P: +45 4824 9024
I: www.avanti-online.com
E: info@avanti-online.com
AVANTI WIND SYSTEMS SL
La Muela (Zaragoza) - Spain
Strong Design
Avanti has produced ladders since 1885, and
for more than 2 decades Avanti Wind Systems has produced ladders in aluminum for
the Wind Turbine Industry. With great success
– Avanti’s ladders can be found in turbine towers all over the world.
P: +34 976 149 524
Avanti can supply a large range of accessories
to the ladder system. Avanti Anchor Point is
developed by Avanti and can be mounted anywhere on the ladder offering the technicians
a safe point to which they can connect themselves when working from the ladder.
In Europe it is required by law that there is a
resting platform for every 6 meters. Avanti
has developed a collapsible resting platform,
which easily can be mounted on the ladder.
The ladder is made of aluminum – and it not
only used in wind turbines. The Avanti Ladder
can be installed inside and outside anywhere
you need a safe and easy mounted ladder system. Avanti’s engineers will be happy to work
with you to find a safe and cost efficient solution.
AVANTI WIND SYSTEMS, INC.
New Berlin, Wisconsin - USA
P: +1 262 641 9101
AVANTI WIND SYSTEMS, GmbH
Elmshorn - Germany
P: +49 0 41 21-7 88 85 – 0
P: +44 0 7930 272 444
AVANTI WIND SYSTEMS PL
Chennai. Tamil Nadu - India
P: +91 95 00 173 492
Fish plate
End cap
Material/Use
Avanti Ladders are made of aluminum, ENAW6060.
Approvals
It is approved and tested in accordance
with EN131-2, ISO14122, DIN18779-1,
BS4211:2005 and BS5395-3:1985 in Europe,
with AS1657 in Australia and ANSI A14.3-1992
in USA.
Loaded on the center the rung can resist a
force of 150 kilo. Avanti Ladder can also be
delivered with heavy duty stiles and rungs.
Ladder with rest platform mounted with omega bracket.
P: +86 21 5785 8811
AVANTI WIND SYSTEMS
LIMITED
Rochdale - United Kingdom
The Avanti Ladder is a safe and rigid structure.
The design is optimized ensuring strength in
the stiles, in the rungs and in the connections
between stiles and rungs. Avanti never makes
any compromise when it comes to safety.
The ladder can be assembled from top to bottom in the turbine tower with either fish plates
or in addition to these with special stile connectors – depending on the method of installation.
Installation
The Avanti Ladder can be installed with or
without Avanti Fall Protection System. Part of
that is a rail mounted in the center of the ladder. The system can also easily be mounted
on the ladder when the ladder is installed in
the tower.
AVANTI WIND SYSTEMS
Shanghai-China
AVANTI WIND SYSTEMS PTY
LTD
Queensland - Australia
P: +61 0 7 39021445
AVANTI BRASIL SISTEMAS
EOLICOS
Fortaleza - Brazil
P: +34 976 149 524
AVANTI WIND SYSTEMS
London, Ontario - Canada
P: +1 519 964 2767
AVANTI WIND TURBINE LADDER
Ladder dimensions (mm)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising