SIIG CE-DP0B12-S1 DisplayPort 1.2 (MST) to 2-Port DisplayPort Splitter Installation Guide
Add to my manuals
12 Pages
advertisement
DisplayPort 1.2 (MST) to
2-Port DisplayPort Splitter
Installation Guide
Introduction
The DisplayPort 1.2 (MST) to 2-Port DisplayPort
Splitter distributes one DisplayPort source to two
DisplayPort displays with Multiple Stream
Transport and video wall function .
Key Features and Benefits
• Splits a single DisplayPort output source to
2 DisplayPort displays supporting Mirror,
Extend, or Video Wall display modes
• Compliant with DisplayPort 1, 2, or 4 lanes at 1.62Gbps, 2.7Gbps and 5.4Gbps
transmission speed respectively
• Compatible with AMD Eyefinity technology
• Supports DisplayPort 1.2 MST multi video/ audio steams
04-0994A 1
• Resolution:
Single output: up to 4Kx2K @60Hz
Dual output: up to 4Kx2K @30Hz or
1920x1080 @60Hz
• Supports 7.1 Ch audio up to 192kHz sampling rate
• Supports deep color RGB/YCC (4:4:4) and
YCC (4:2:2/4:2:0) 16-bit color
• Works with existing DP cable and connectors, no software installation required
Package Contents
• DisplayPort 1.2 (MST) to 2-Port DisplayPort
Splitter
• Power adapter
• Installation guide
2
Layout
DC 5V
Power LED DP IN
Figure 1: Front Panel Layout
• DC 5V: Power adapter jack for the included
5V power adapter
• Power LED: On when power adapter is connected
• DP IN: Connects to your DisplayPort source
DP output x2
Figure 2: Rear Panel Layout
• DP output (1-2): Connects to your
DisplayPort displays
3
DC Power Jack
- Refer to the table below for the specifications of the power adapter.
OD ID
L
Outside diameter
(OD)
Inside diameter
(ID)
Plug length
(L)
Negative / Positive
3.5(mm) 1.35(mm) 10(mm)
*Center pin for positive voltage and the outer shield for negative voltage
Table 1: Power Jack Specifications
Hardware Installation
1.
Power off all devices you plan to connect to this splitter.
2.
Connect your source's DisplayPort out to the splitter's DP input using a DisplayPort cable (DisplayPort cable not included).
4
3.
Connect your DisplayPort monitors to the splitter's DP output with DisplayPort cables
(DisplayPort cables not included).
4.
Connect the included power adapter to the splitter's power jack and plug it into a reliable power outlet.
5.
Power on all of the connected devices.
6.
The splitter is ready for use.
5
Application
The DisplayPort 1.2 (MST) to 2-Port DisplayPort
Splitter supports either 2 DisplayPort displays or
4 DisplayPort displays simultaneously (2 splitters
+ 2 DisplayPort outputs are required for 4
DisplayPort displays).
2 DisplayPort Displays
* Mirror Mode
For education, meetings, or presentations
2 DisplayPort displays
DP In
DP Out
DP Out
DisplayPort source (Desktop, notebook, etc)
Figure 3
6
* Extended Mode (Multi-Stream Transport)
For business or entertainment
DP Out
DP Out
DP In
Figure 4
* SLS Video Wall Mode - 1x2 (Eyefinity Technical)
For art designer or panoramic view
DP In
DP Out
DP Out
Figure 5
7
4 DisplayPort Displays (2 Splitters)
* SLS Video Wall Mode - 2x2 (Eyefinity Technical)
For advertisement, exhibition, or show
4 DisplayPort displays
DP Out
DP Out
DP In
DP Out
DP In
DP Out
DisplayPort source* (e.g. Desktop)
* The source device's graphics card must have 2 DisplayPort output connectors.
Figure 6
Note:
AMD with Eyefinity Technology graphic cards support SLS
Video Wall Mode - 1x2 & 2x2 only.
8
Graphic Card Setup
At the AMD Catalyst Control Center, click AMD
Eyefinity Multi-Display for advanced display mode setup. See Figure 7.
Refer to your graphic card menu for more details.
Figure 7
9
Supported Video Resolutions
Refer to Table 2 for supported resolution under different video modes (2 DisplayPort displays, or
4 DisplayPort displays via two DisplayPort 1.2
Splitters ):
Supported Video Resolutions (TV Wall)
Two Monitors Four Monitors (2x2)
Computer Setting Each Monitor Computer Setting Each Monitor
3840 x 1200
2560 x 1024
1920 x 1200
1280 x 1024
3840 x 2160
2560 x 2048
1920 x 1080
1280 x 1024
2048 x768
3360 x 1050
2880 x 900
1600 x 600
1280 x 480
2800 x 1050
1024 x 768
1680 x 1050
1440 x 900
800 x600
640 x 480
1400 x 1050
2048 x 1536
3360 x 2100*
2880 x 1800*
1600 x 1200*
1280 x 960*
2800 x 2100*
1024 x 768
1680 x 1050
1440 x 900
800 x 600
640 x 480
1400 x 1050
Table 2
*Note: The timing is listed in EDID extension block. Some old display drivers may not support video wall feature.
The actual output resolution is determined by the
EDID of each display. We suggest that you use the same brand and model DisplayPort displays for the best video output.
10
Technical Support and Warranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for two (2) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.
• You are responsible for the cost of shipping to SIIG. Ship the product to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
11
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by adding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High quality control standards are evident by the overall ease of installation and compatibility of our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs, through major distributors, system integrators, and VARs in the Americas and the UK, and through e-commerce sites.
PRODUCT NAME
DisplayPort 1.2 (MST) to 2-Port DisplayPort Splitter
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
DisplayPort 1.2 (MST) to 2-Port DisplayPort Splitter is a trademark of SIIG, Inc. SIIG and the
SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
July, 2015 Copyright © 2015 by SIIG, Inc. All rights reserved.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project