Catalogue Sheet: CS4000 Series

Catalogue Sheet: CS4000 Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
Supply and install the Ready-Lite® CS4000 Series LED Exit Sign. The equipment shall operate with universal
AC input voltage of 120/277/347VAC at less than 1.5W and universal two-wire DC input voltage from 6VDC
to 24VDC at less than 1.5W for single and double face signs. The Exit Sign shall consist of a two-piece white
extruded aluminum combined body/faceplate with a maximum depth of 1-1/4”. The exit shall also include
extruded aluminum end caps with white gaskets in order to provide protection to the internal components
and eliminate any possible light leaks. The exit fixture shall be either single or double-faced as shown on the
drawings. The faceplate shall be of a stencil design and will incorporate 6” high letters with a 3/4” stroke. The
canopy shall fasten to the exit body for ease of installation in either ceiling or end mount.
The fixture shall contain a light source, which shall be LED with a long life and shall consist of separate AC
and DC LED sources in the case of AC/DC-remote equipment. Red LED technology shall be ALINGAP.
The Exit Sign in a Self-powered configuration shall be equipped with a Nickel-Cadmium battery and shall stay
illuminated during emergency operation for at least two hours upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No.141
The equipment shall be Ready-Lite®Model:
.
WIRE GUARDS
460.0057-RL
wall mount
460.0048-RL
end mount
460.0058-RL
ceiling mount
Dimensions are approximate and subject to change.
9-5/8” [24.3 cm]
4-7/8” [12.5 cm]
8-7/8” [22.5 cm]
Extruded Aluminum
“Sortie” Sign
FEATURES
• Thin profile, two-piece extruded
aluminum housing
• Mounting to be pre-specified
• Universal field-selectable chevrons
(knockout)
• Indirect refractive lighting technology
provides bright, even illumination
• Long life, energy-efficient ALINGAP LED
light source
• Energy efficient: consumes less than
3.5W
• Normal AC and emergency DC
operation – 120/277/347VAC and 6V
to 24VDC input
• CSA certified, meets or exceeds
CSA 22.2 No. 141 requirements
DIMENSIONS
5-5/8” [14.2 cm]
CS4000 SERIES
1-3/8” [3.4 cm]
19-1/8” [48.6 cm]
19-7/8” [50.4 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/DC standard
120/277/347VAC
less than 1.5W
6 to 48VDC
less than 1.5W
AC/ special DC
120/277/347VAC
less than 1.5W
36/48/120VDC
less than 3W
120VAC/DC two wires
120VAC
less than 3W
120VDC
min. 3W
self-powered
120/347VAC
less than 3.5W
nickel-cadmium battery
min. 2 hours
ORDERING INFORMATION
SERIES
CS4= sortie
FACES/MOUNTING
000= single face, wall mount
100= single face, ceiling mount
100E= single face, end mount
200= double face, ceiling mount
200E= double face, end mount
COLOUR
VOLTAGE
WH= polar white
BK= black
TA= textured aluminum
BA= brushed aluminum
UL= 120/277/347VAC, 6 to 24VDC
LU36= 120/277/347VAC, 36VDC
LU48= 120/277/347VAC, 48VDC
LU120= 120/277/347VAC, 120VDC
ISP= self-powered, 120/347VAC
LI20-2W= 120VAC - 120VDC - 2 wires
OPTIONS
TP= tamper-proof screws*
*990.0119-RL= Tamper-proof bit
(sold separately)
E X A M P L E : C S 4 0 0 0 W H U LT P
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement