USER’S MANUAL Xemio-657 MP3/MP4 Media Player with 4GB memory

USER’S MANUAL Xemio-657 MP3/MP4 Media Player with 4GB memory
USER’S MANUAL
Xemio-657
MP3/MP4 Media Player with 4GB memory
For information and support: www.lenco.com
1
Cautions
• Do not place naked flames, such as lighted candles on or near the
product.
• Do not place objects filled with liquids, such as vases on or near the
product.
• Do not use or store this product in a place where it is subject to direct
sunlight, heat, excessive dust or vibration.
• Do not use this product with wet hands.
• Do not clean this product with water or other liquids.
• Do not block or cover the slots and holes in the product.
• Do not push foreign objects into the slots or holes in the product.
• Do not attempt to open this product yourself. There are no user
serviceable parts inside.
• Do not allow children access to plastic bags.
Safety Warnings
• Before using this product, read and follow all warnings and instructions.
• This product is not intended for use by young children. Young children
should be properly supervised.
• This product is intended for household use only and not for commercial
or industrial use.
• Do not expose to dripping or splashing.
• No naked flame sources, such as lighted candles, should be placed on the
product.
• Ventilation should not be impeded by covering ventilation openings with
items such as newspapers, table cloths, curtains and the like.
• Make sure the unit is adjusted to a stable position. Damage caused by
using this product in an unstable position or by failure to follow any
other warning or precaution contained within this user manual will not
be covered by warranty.
We, suggest retaining the packaging in case for future transport of the
product.
If at any time in the future you should need to dispose of this product
please note that: All batteries and accumulators need to be removed from
this product (Removal of Waste Batteries and Accumulators).
WARNING: • When participating in the traffic listening to a personal
music player can make the listener less aware of potential
dangers such as approaching cars.
2
WARNING: • Prolonged exposure to loud sounds from personal music
players may lead to temporary or permanent hearing loss.
1. Get to know the controls on Player
Item
1
2
3
4
5
6
7
8
9
10
11
12
Description
TFT LCD Display
Button (On / Off, Play / Pause)
Button (Previous / Fast-Rewind)
Button (Next / Fast-Forward)
M Button (Menu)
Button (Previous Menu / Exit)
Micro USB Port (PC Connection / Charge)
Microphone Position (mono, inside USB port)
Micro SD Memory Card Slot
Earphone Output Jack (3.5mm Stereo)
Button (Volume Down)
Button (Volume Up)
2. About Player Battery
Player has an internal, non–user-replaceable battery. For best results,
the first time you use player, let it charge for about 2 ~ 3 hours or until the
battery status icon in the “Connect” screen shows that the battery is in full.
Battery is in full
3
Note: Player may continue use battery power after it’s been turned off. For
maintain the battery life and performance, if unit isn’t used for a while, the
battery need to be recharged, recharging the battery at least once per
month.
a. Charging the Battery:
You can charge the player battery in two ways:
Connect player to your computer. Or,
Use the USB power charger. (not included)
b. Connection and Charging:
Once you have connected player with computer / power charger, then
you will see the “Connect” screen appear on screen,
The level bars are running in battery status icon at the “Connect” screen.
The battery is in charging.
“Connect” Screen
In Charging
Important: The battery does not charge when your computer is in sleep. The
USB port on most keyboards does not provide enough power to charge the
player. Connect player to a USB 2.0 port on your computer only to prevent
charge problem.
3. Connecting and Disconnecting Player
You can connect the player with your computer to transfer those media
files and recorded voice memos when necessary, and to charge the battery.
a. To Connecting Player
To connect player to your computer, plug the connector of USB Cable into
a USB port on your computer, and connect the other end to player, then
the “Connect” screen appear for view.
Now the player is ready for media files transfer with your computer and
4
the battery is charging.
You can transfer the media files by using the computer mouse use drag
and place, or copy and paste, in between the player and your computer.
Disconnect it when you’re done.
b. To Disconnecting Player
It’s important not to disconnect player while it’s syncing or transferring
files. Eject the player before disconnect it.
To eject player, press and hold M button for about 2 seconds, the
“Connect” screen will switch to “Main Menu” screen. And now is safe to
disconnect the player with your computer. Unplug the USB cable from
the player. Or,
If you’re using a Windows PC, you can also eject player in My Computer
or by clicking the “Safely Remove Hardware” icon in the Windows
system tray, select the correspondence name of USB Device and choose
“Stop” > choose “Confirm” > choose “Confirm” follow by the pop up
windows you’re your computer.
If you’re using a Mac, you can also eject player by dragging the player
icon on the desktop to the Trash.
Disconnect the USB cable from the player and computer, simply remove
it.
If you accidentally disconnect player without ejecting it, reconnect it to
your computer and sync again. However, some media file may loss.
4. Getting Start the Player
Turn ON / OFF the player and use of Main Menu.
Press and hold the
button for 3 seconds to turn ON, then you will see
any one of the following shown Main Menu screen, Music / Movie /
Record / Voice / Photo / eBook / Game / Setup, will appear on LCD after
the Loading and Opening screen have displayed.
To OFF the player, press and hold the
button for 3 seconds.
“Main Menu” screens
5
5. Use Setup Menu
You might need to set date & time or change some default setting as you
desired in setup sub menu before you start to use the player.
To go into setup menu, from main menu, choose “Setup” by use
/
button and then press
button, a “Setting” menu appears to use.
You can go back to previous menu by press the
button during in
setup menu. Or, press and hold the
button to return to main menu.
Setup Menu
(Menu Page 1)
(Menu Page 2)
a. To Setup “System time” (Date & Time):
Choose “System time” by using
/
button and then press
button, a date & time setting screen appears to use.
Press “ ” button, the year is highlighted then adjusting to current year by
pressing the
/
button. And repeating the adjusting methods by
“ / ” and
/
button again for finished those items; Month,
Date, Hour, Minute and seconds setting adjustment.
Finally, you need to press the
button to confirm the adjustment and
back to Setup menu, if not the date & time will not to memorize and you
need to adjust them again.
Note: the set date & time will be losses if internal rechargeable battery is
fully emptied in protection mode. Adjust the clock again if you want it to use.
b. To change “LCD set”
You can set the backlight to illuminate the screen for a certain amount of
time as you desired or make the backlight to always ON when every time
you turn ON the player.
To change LCD backlight, choose “LCD set” > choose “Dark mode”, a
level bar with number appear then chose “0 (always On) / 5 / 10 / 15 / 20
and
/ 25 / 30 / 35 / 40 / 45 / 50 seconds” as you desired by using
/
buttons. Choose “0” to prevent the LCD backlight from turning to
off. (choosing this option decrease battery performance)
c. To Change “Language”
This player can use difference OSD languages.
To set the language, choose “Language”, and then choose which
language as you desired by using
and
/
buttons.
d. To Set “Power Off”
The Power Off setting can extend the time between battery charges by
6
turning OFF the player when you are not using the controls or no operation.
Also, Sleep function provided for more choice.
To set power off time, choose “Power off”, then choose “Off time”, a
levels bar with number menu appear, then choose “0 - 200 seconds” as
you want by using
and
/
buttons.
To set sleep time, choose “Power off”, then choose “Sleep time”, a levels
bar with number menu appear, choose “0 / 10 / 20 /30 / 40 / 50 / 60 / 70
/ 80 / 90 / 100 / 110 / 120 minutes” as you want by using
and
/
buttons.
e. To View “Memory info”
You can view about the memory status of player, such as the numbers of
remaining memory space available and the percentage of memory have
used.
To view the status, choose “Memory info” by using
and
/
buttons. An information screen, remaining memory space available and
percentage of memory used, appear for view.
To return to setup menu or main menu press
button or press and
hold
button.
f. To View “Firmware Version”
You might need to view the details about firmware information inside the
Player.
Choose “Firmware version” by using
and
/
buttons, an
information screen appear for view.
To return to setup menu or main menu, press
button or press and
hold
button.
g. To “Exit”
Select Exit to back to main menu. Or, press and hold the
button to go
back main menu.
6. Use Music Menu
You can use music player to playback with supported music file format of
audio coding; WMA and MP3 are supported by the player. To open the music
player in Main Menu:
From main menu, choose “Music” by using
/
and
button, a
“Music Now Playing” screen appears to use.
“Music Now Playing” Screen
7
a.
b.
c.
d.
To Play / Pause Music
In Music Now Playing screen, press
button to start the play.
Press
button to pause the playing music.
Press it again to resume.
Play Previous or Next Music
Press
button to play next music.
Press
button to play previous music.
Use Fast-Forward or Fast-Backward
Press and hold
button to use fast-forward
Press and hold
button to use fast-backward.
Adjust volume level
In music playing, press
/
buttons to adjust volume levels to Up /
Down.
Wait for 6 – 8 seconds or press
button to return to music now playing
screen.
For hearing protection; A display warning pop-up on TFT screen, when every
time you increase the volume level and reach to the default setting level
which may exceed 85db. Press M button to accept the warning and press
Button to increase the volume level.
e. Use Lyric Display
This player supports “*.LRC” lyric files and lyrics can synchronous
displayed while playing music if you music has lyric included. How to know
whether the lyrics exist? If the current song has matching lyric files, the color
dot beside the Lyric Message icon will be turned to green color
from
red
in Music Now Playing screen.
Make sure the music file name and “*.LRC” file name must be same and
upload into player together.
Playing the music with lyrics, and then press and hold M button to enter
the lyric display mode and the lyrics is displaying and moving up
accordingly with the playing music.
Press M button to cancel the lyrics display and go back to Music Now Play
screen if you want.
7. Use Music Submenu in Music Stop Mode
You might need to selecting folders for music play and delete music files.
To do this:
a. Local Folder
In Music Now Playing screen, press
button to stop the playing music if
player is in playing, then press M button to call up the Music Submenu.
In Music Submenu screen, choose “Local folder” a list menu appear, and
then select folder and / or choose a music file by using
/
and
button.
It will go back to music now playing screen once a music file is selected.
8
Then press
button to play.
b. Delete file
In Music Submenu screen, choose “Delete file” a list menu appear, and
then choose which music file that you want to delete by using
/
and
buttons.
Once file is selected, press
button and choose Yes to confirm or No to
cancel.
c. Delete All
In Music Submenu screen, choose “Delete all” then selects “Yes / No” by
using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All music files will be deleted once YES is selected and confirmed, a
“Deleting” screen appear for a while and deleting process is in progress,
then “Empty disk!” message will shown on screen for few seconds.
d. Exit
Select Exit to back to music now playing screen.
8. Use Music Submenu in Music Playing Mode
You might need to do some changes for music playing, such as repeat, EQ
settings for music files… etc. To change setting:
a. To Set Repeat
In music playing mode, press M button, a Music Submenu appear, then
choose “Repeat”, then choose “Normal / Repeat one / Folder / Repeat
folder / Repeat all / Random ” as you desired by using
/
and
buttons.
b. To Change Equalizer
In music playing mode, press M button, a Music Submenu appear, the
choose “Equalizer”, then choose “Natural / Rock / Pop / Classic / Soft /
Jazz / DBB” as you desired.
c. Exit
Select Exit to back to music now playing screen.
9. Use Movie Menu
a. To Play Movie
From Main Menu, choose “Movie” by using
/
and
button, a
“Movie Now Playing” screen appears to use.
In Movie Now Playing” screen, press
key to start the play.
Press
button to pause and to back to Movie Now Playing screen.
Press it again, the video will play continue.
b. To Play Previous or Next Video
Press
button to play next movie file.
Press
button to play previous movie file.
9
c.
d.
Use Fast-Forward or Fast-Backward
Press and hold
button to play fast-forward.
Press and hold
button to play fast-backward.
Adjust Volume Level
In movie playing, press
/
buttons to adjust volume levels to Up /
Down.
For hearing protection; a beep warning will be heard from earphone, when
every time you increase the volume level and reach to the default setting
level which may exceed 85dB. Press M button to accept the warning and
press
button to increase the volume level.
10. Use Movie Submenu
You might need to selecting folders, delete movie files and set repeat for
movie play. You can make change during in the playing mode at Movie Now
playing screen To do this:
In “Movie Now Playing” screen, press M button to enter to movie
submenu.
a. Local Folder
In movie submenu screen, choose “Local Folder”, a file list menu appear,
and then select folder and / or choose a desired movie file to play by
using
/
and
button.
It will go back to music now playing screen once a music file is selected.
Then press
button to play.
b. Delete File
In movie submenu screen, choose “Delete file” a file list menu appear,
and then choose which movie file that you want to delete by using
/
buttons.
Once file is selected, press
button and choose “Yes” to confirm or
“No” to cancel.
c. Delete All
In movie submenu screen, choose “Delete all” then selects “Yes / No” by
using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All movie files will be deleted once YES is selected and confirmed, a
“Deleting” screen appear for a while and deleting process is in progress,
then “Empty disk!” message will shown on screen for few seconds.
d. Repeat
In movie submenu, choose “Repeat”, then choose “Normal / Repeat one
/ Folder / Repeat folder / Repeat all / Random” as you desired by using
/
and
buttons.
e. Exit
Select Exit to back to music now playing screen.
10
11. Convert Video files into AMV
This tool can be used to transform those video files into AMV files on the
computer before upload them to your player.
To install this video convert tool to your computer, open a folder named
“UTILITIES > Video Conversion Software” which stored in your player’s
internal memory or stored in a provided CD. (Download it onto your
computer for copy and installation)
Select “Setup” to start the install program, the software will
automatically install to your computer.
After installation is done, open folder “Media Player Utilities 4.28” > click
program “AMV&AVI Video converter” in All Program bar on your
window PC. The program interface as shown below:
Noted: This program is used to convert video files into AMV format, currently
only AMV format is supported by this player.
Then click
to choose the folder where to save the AMV files, and
then click
to select the folder where the original files are. The
original file will show in the file window once selected.
11
Move the mouse arrow and left click mouse on the unconverted source
files to select with highlight in the file window, then the
icon will be
highlighted into
icon. Now click this
icon and a dialog box will be
shown.
Now click this
icon and a dialog box will be shown.
Make sure Video type is “AMV”, Screen width and height is “160x120”
selected. Video convert and Image quality should be “Normal” and
“High” as defaulted. Click “OK” to confirm the setting.
to start converting.
Now click
12
After conversion, the AMV files will play automatically for preview.
And now, the converted AMV file is ready to transfer, you can simply copy
and place those converted AMV files to the media player.
Note: Only pixels in 160x120 can be supported by this player.
12. Use Record Menu
You can use the player as a Voice Recorder and recording voice memos
using the built-in microphone.
a. To Start Recording Voice Memo
From main menu, choose “Record” by using
/
and
buttons,
a “Now Recording” screen appear to use.
“Now Recording” Screen
b. To Start / Pause Recording
Press
button to start the recording and the recording time is running.
Press
button to pause the recording and recording time will stop and
flashing. Press it again the recording and time will run continue.
c. To Save and Stop Recording File
Press
or press and hold
button, the recorded file will save into
memory and ready for next recording.
Press and hold
button, the recorded file will save into memory and to
exit.
13. Use Record Submenu (in Stop Mode)
13
You might need to change the folder locations which want to store the
record file and / or change record quality to better compression values.
In Now Recording screen at stop mode, press M button, a “Record
Sub-menu appear to use.
a. Local folder
In record submenu, choose “Local folder” and then choose the folder
name which you want to save the record file by using
/
and
buttons.
Once folder name selected, press and hold the M button, then the folder
location is changed and go back to Now Recording screen.
And now you can see the folder name is changed at the Record Folder
icon in “Now Recording” screen.
b. Record Type
In record submenu, choose “Record type”, then choose “32K BPS / 64K
BPS / 128K BPS / 256K BPS” values as you desired by using
/
and
buttons.
14. Use Voice Menu
For playback and manage the recorded voice memos file.
From main menu, choose “Voice” menu by using
buttons, a “Voice Now Playing” screen appear to use.
“Voice Now Playing” Screen
/
and
a. To Play and Pause Recorded Voice Memos
In Voice Now Playing screen, press
button to start to play the
recorded file.
Press
button to pause the playing file.
b. To Play Previous or Next File
Press
button to play next file.
Press
button to play previous file.
c. To Fast-Forward or Fast-Backward
Press and hold
buttons to use fast-forward
Press and hold
button to use fast-backward.
d. Adjust volume level
In music playing , press
/
button, a change volume control screen
appears, then press
/
buttons to adjust volume levels to up /
14
down.
Wait for 6 – 8 seconds or press
screen.
button to return to music now playing
15. Use Voice Submenu in Stop Mode
You might need to change some setting as you desired for playing Voice
file, you can make change during in the playing mode at Voice Now Playing
screen
a. Local Folder
In Voice Now Playing screen, press
button to pause / stop the playing
file, if in playing mode, then press M button to call up the voice submenu.
In Voice submenu screen, choose “Local folder” a list menu appear, and
then select folder and / or choose a voice file by using
/
and
button.
It will go back to music now playing screen once a music file is selected.
Then press
button to play.
b. Delete File
In voice submenu screen, choose “Delete file” a list menu appear, and
then choose which voice file that you want to delete by using
/
and
buttons.
Once file is selected, press
button and choose Yes to confirm or No to
cancel.
c. Delete All
In voice sub-menu screen, choose “Delete all” then selects “Yes / No” by
using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All music files will be deleted once YES is selected and confirmed, a
“Deleting” screen appear for a while and deleting process is in progress,
then “Empty disk!” message will shown on screen for few seconds.
d. Exit
Select Exit to back to music now playing screen.
16. Use Voice Sub-menu in Playing Mode
You might need to do some changes for music playing, such as repeat, EQ
settings for music files… etc. To change setting:
a. Repeat
In voice playing mode, press M button, a Music Sub-menu appear, then
choose “Repeat”, then choose “Normal / Repeat one / Folder / Repeat
folder / Repeat all / Random ” as you desired by using
/
and
buttons.
b. Exit
Select Exit to back to music now playing screen.
15
Note: Press and hold the
button will go back to Main Menu directly.
17. Use Photo Browse
You can use the player as picture / photo viewer:
To browse picture / photo file, from main menu choose “Photo” by using
/
and
button, a list menu appear to use.
Choose a file by using
/
button, and then press
button to
play.
Press
button to stop and to go back to list menu for other files
selection.
To change previous / next photo, press
/
button.
Press and hold
button to back to main menu.
18. Use Photo Submenu in List Screen
You might need to change some setting for photo browse. To change
setting:
a. Local Folder
In list menu, press M button to call up the photo submenu.
In photo submenu, choose “Local folder” a list menu appear, and then
choose folder and file to browse by using
/
and M button.
Once photo file is selected, press
button to play.
b. Playback Set
In photo submenu, choose “Playback set” and then choose “Manual
play”. However, you need to use
/
button to browse next /
previous photo in photo playing mode when Manual Play is selected.
Choose “Auto play”, a setting menu appear, then choose “2 / 3 / 4 / 5 / 6 /
7 / 8 / 9 / 10 second(s)” as you desired by using
/
and
buttons. The slide show function is activated as your selected time gap to
playing the photo files one by one automatically.
c. Delete file
In photo submenu, choose “Delete file” a list menu appear, and then
choose which photo file that you want to delete by using
/
button.
Once file is selected, press
button and choose Yes to confirm or No to
cancel.
d. Delete All
In photo submenu, choose “Delete all” then selects “Yes / No” by using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All photo files will be deleted once YES is selected and confirmed, a
“Deleting” screen appear for a while and deleting process is in progress,
then “Empty disk!” message will shown on screen for few seconds.
e. Exit
16
Select Exit for back to photo browse list menu screen.
19. Use eBook Menu
You can use the player as a text reader with supported file format (.TXT).
a. To open eBook
From main menu, choose “eBook” by using
/
and
buttons. A
list menu appears to use.
Choose a file which you want to read by using
/
button, and
then press
button to play.
Press
button to change next page,
Press
button to go back to previous page,
Back to list menu screen, press
button.
Go back to main menu, press and hold
button.
20. Us eBook Submenu in list menu screen
You might need to change some setting for eBook reading. To change
setting:
a. Local Folder
In eBook list menu screen, press M button to call up the eBook Submenu.
In eBook Submenu, choose “Local folder” a list menu appear, and then
choose folder and file by using
/
and
button.
Once file is selected, press
button again to read.
b. Playback Set
In eBook Submenu, choose “Playback set” and then choose “Manual
play”. You need to use
/
button to change next / previous page
for reading when Manual Play is selected. Or,
Choose “Auto play”, a setting menu appears, then choose “1 / 2 / 3 / 4 / 5
/ 5 / 6 / 7 / 8 / 9 / 10 second(s)” as you desired by using
/
and
buttons. The Page Flip function is activated as your selected time gap to
playing.
c. Delete file
In eBook Submenu, choose “Delete file” a list menu appear, and then
choose which eBook file that you want to delete by using
/
button.
Once file is selected, press
button and choose Yes to confirm or No to
cancel.
d. Delete All
In eBook Submenu, choose “Delete all” then selects “Yes / No” by using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All eBook files will be deleted once YES is selected and confirmed, a
“Deleing” screen appear for a while and deleting process is in progress,
then “Empty disk!” message will shown on screen for few seconds.
17
e. Exit
Select Exit for back to eBook list menu screen.
21. Us eBook Submenu in Playing Mode
You might need to add, select and delete some bookmark when you reading,
to do this:
a. Bookmark Select
In eBook playing mode, choose “Bookmark select” by using
/
and
button.
Choose a stored bookmark which you want to call and then press M
button to play.
b. Bookmark Delete
In eBook playing mode, choose “Bookmark delete” a list menu appears,
and then choose which saved bookmark you want to delete by using
/
button.
Once bookmark is selected, press
button to confirm. The bookmark is
deleted and goes back to current reading play.
c. Bookmark Add
In eBook playing mode, select the reading page you want to bookmark,
press M button to call up eBook submenu.
Choose “Bookmark Add” by using
/
button and then press
button, the pages is saved into bookmark and go back to current reading
page automatically.
d. Exit
Select Exit for back to eBook list menu screen.
22. Use Memory Card Slot
This player allows you to play those support media files from your
memory card (T-Flash). Also it will increase the mobile hard disk memory
capacity of the player if you use this option.
a. To Play From Memory Card:
Turn Off the player. Now insert your Micro SD memory card into the
memory card slot on side of player.
Turn On the player and now the Micro SD memory card, T-Flash, is ready
to use.
The “Card folder” item will be existed to use when you enter into those
music, movie, photo, , Record, Voice and eBook submenu.
Go into the card folder and choose you desired folder(s) and file(s) to
play.
To take out the Micro SD memory card, turn Off the player.
23. Use Game Menu
18
There have a game name “Snake”. Control the snake move up, down, left
and right to eat the food (dot) which will exist somewhere on TFT screen.
The snake’s body will get longer at every eats for food, but don’t let the
snake hit the walls and hit the snake body.
To play game, from Main menu, choose “Game” menu, then choose a
game to play.
Control KEY instruction;
Press:
= left,
= right, M = Up,
= Down,
= Pause.
Press and hold M button to exit the game.
24. Reset Device
In some circumstances, the device may encounter dead halt during use.
This device has design with built-in a mini tact switch which located at the
behind of the earphone jack, so it can provide reset function to restart the
device by pass through the earphone jack hole.
To Reset:
Use a 1mm stick or similar object (like tooth stick), and carefully insert
the stick, use dull side, into the earphone jack hole until you feel to hit
the end. Actually that is the tact switch button surface.
Then add a bit of force and you will get a click sound and feeling return
from switch. The device is reset and restart in seconds.
Important: Do not reset the device if it is proper working.
25. Trouble Shooting
Unit cannot turn ON
* Check whether Power is slide to ON.
* Check battery is it charged with enough energy.
No sound is heard * Check whether Volume is set “0” and connect
from headphone.
the headphone plugs firmly.
* Check whether the headphone plug is dirty.
* Corrupted MP3 may make a static noise and the
sound may cut off. Make sure that the music files
are not corrupted.
Characters in LCD are * Check whether the right language has been
corrupted
selected.
Download of music * Check whether USB cable is damaged and is
files fails.
connected properly.
* Check whether driver is installed correctly.
* Check whether the player’s memory is in full.
26. Specification
19
Dimension
Weight
LCD
PC connection
Earphone Impedance
Internal Memory
Memory Card Slot
Battery
Power Source
Audio
Music Format
Movie Format
Recorder Coding
Picture Format
eBook Format
Operating Temperature
Operating System
85mm (H) x 41.5 mm (W) x 9.0mm (D)
25.5g
1.8 inches, Resolution (RGB) 128 x 160
USB 2.0 (High Speed)
32 Ohm
See carton or giftbox
Micro SD Card (support up to 16GB and possible
for 32GB)
Lithium 3.7V, 170mAh
Max. Play Time: 8 - 10 Hours (MP3 music with
power saving mode)
DC Input: DC 5V 500mA
Earphone Output
2mW x 2 at 32 Ohm
Frequency Responses 20Hz to 20000Hz
SNR
> 70dB
MP3 / WMA
32Kbps – 320kbps
AMV
160x120
WAV
32 / 64 / 128 / 256kbps
JPEG / BMP
TXT
0 to 40℃
Window 2000/XP/Vista/Win7, Mac 9.2 or Higher
27. Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from the
description made in this manual
28. Service and support
For information: www.lenco.com
Lenco offers service and warranty in accordance to European law, which
means that in case of repairs (both during and after the warranty period)
you should contact your local dealer.
Important note: It is not possible to send products that need repairs to
Lenco directly.
Important note: If this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
20
This device is not suitable for professional use. In case of professional use, all
warranty obligations of the manufacturer will be voided.
Products with the CE marking comply with the EMC
Directive (2004/108/EC) and the Low Voltage Directive
(2006/95/EC) issued by the Commission of the European
Community.
The declaration of conformity may be consulted at
https://lencosupport.zendesk.com/forums/22413161-CE-Documents
This symbol indicates that the relevant electrical product or
battery should not be disposed of as general household
waste in Europe. To ensure the correct waste treatment of
the product and battery, please dispose them in accordance
to any applicable local laws of requirement for disposal of
electrical equipment or batteries. In so doing, you will help
to conserve natural resources and improve standards of
environmental protection in treatment and disposal of
electrical waste (Waste Electrical and Electronic Equipment
Directive).
®All rights reserved
21
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement