Eaton DC Power Solutions Catalogue

Eaton DC Power Solutions Catalogue
Product Catalogue
DC Power Solutions
Australia and New Zealand
Sma
r te
rE
n
y
erg
Contents
Eaton’s Telecommunications Power Solutions Business������ 3
DC Power Solutions
Application and Product Selection Guide ���������������� 6
3G Enterprise Power Solutions EPS2 Series������������������������������������������������������������� 7
3G Enterprise Power Solutions EPS5 Series������������������������������������������������������������� 9
Enterprise Extended Battery Module���������������������11
3G Access Power Solutions APS3 and APS6 Series������������������������������������������ 13
3G Access Power Solutions APS6-600 Series���������������������������������������������������� 15
3G Access Power Solutions APS12 Series��������������������������������������������������������� 17
Software and Communications
PowerManagerII™ Control and
Monitoring Software���������������������������������������������� 35
DCTools™ Configuration Software������������������������ 37
Rectifier Modules
APR24-3G Access Power Rectifier������������������������ 39
APR48-3G Access Power Rectifier������������������������ 41
APR48-ES Access Power Energy
Saver Rectifier������������������������������������������������������� 43
NPR48-ES Energy Saver Rectifier������������������������� 45
CR48-3G Core Power Rectifier������������������������������ 47
Control and Monitoring
ASC48-ES Solar Charger���������������������������������������� 49
DV2 - 3G Access Power Solutions
with Batteries�������������������������������������������������������� 19
SC200 System Controller�������������������������������������� 51
DV2 - 3G Metro Power Solutions��������������������������� 21
CellSure™ Battery Monitoring and
Fault Diagnosis������������������������������������������������������ 53
DV2-N - 3G Core Power Solutions������������������������� 23
SiteSure-3G™�������������������������������������������������������� 55
DV2 - 3G Core Power Solutions����������������������������� 25
Customer Premises Equipment
MPS12-30 Micro Power Solution��������������������������� 27
Inverter Power Solutions
Matrix™ Modular Inverter������������������������������������� 29
Matrix™ 2000 Standalone Inverter������������������������ 31
Telecom Inverter Solution�������������������������������������� 33
Outdoor Enclosures
Whisper Cabinet™ Roadside
Telecom Equipment Enclosures���������������������������� 57
Echo Outdoor Equipment
Enclosures������������������������������������������������������������� 59
Bullet™ Optical Fibre Equipment
Enclosures������������������������������������������������������������� 61
ORC™ Roadside Telecom
Equipment Enclosures������������������������������������������ 63
Mini Shelter Outdoor Power
and Equipment Enclosure������������������������������������� 65
2EATON DC Power Solutions Catalogue
Eaton’s Telecommunications Power Solutions Business
Our Business
Eaton is a power
management company
providing energy-efficient
solutions that help our
customers effectively
manage electrical, hydraulic
and mechanical power. A
global technology leader,
Eaton acquired Cooper
Industries plc in November
2012. Eaton serves the
needs of customers located
in over 175 countries. For
more information, visit
www.eaton.com.
At Eaton, we’re energised
by the challenge of powering
a world that demands
more. With over 100 years
experience in electrical power
management, we have the
expertise to see beyond
today. From groundbreaking
products to turnkey design
and engineering services,
critical industries around the
globe count on Eaton.
We power businesses with
reliable, efficient and safe
electrical power management
solutions. Combined with
our personal service, support
and bold thinking, we are
answering tomorrow’s
needs today. Follow the
charge with Eaton. Visit
eaton.com/electrical.
Environmental Standards
Eaton strives for the
highest environmental
standards across both our
operations and products.
Our commitment goes
beyond compliance with
existing regulations. We are
recognised as an industry
leader in creating safe
workplaces and conserving
world resources.
Eaton is committed to
environmental stewardship
and participates in a
number of volunteer
government partnership
programs worldwide.
We were among the
first diversified industrial
companies to pursue global
ISO 14001 certification
- a rigorous standard for
managing and improving
environmental performance.
Today, virtually all of Eaton’s
facilities worldwide have
earned this designation.
Design for Environment (DfE)
and Life Cycle Assessment
are core parts of the Eaton
product development
process. They ensure that
a product is safe, uses
resources wisely, and fully
sustainable over the whole
life cycle.
Unsurpassed Experience
Eaton has in excess of 40
years experience of working
closely with customers
to deliver tailored power
management solutions for
communications networks
around the world.
Customer led Solutions
Eaton’s insight into customer
needs is demonstrated
through its products in
terms of reliability, efficiency,
smart energy features,
power density, and ease
of installation, Intelligent
monitoring and control
capabilities add flexibility,
precision, reliability, and
automation - without
added complexity.
Comprehensive Range
Our telecom power solution
range includes AC and DC
power systems, power
and ancillary equipment
management software,
cabinets and enclosures,
and other products. Eaton
also offers a wide range
of DC services including
design, installation and
commissioning remote
monitoring, turnkey
integration and site
support, to provide a
seamless solution.
Delivery
Eaton’s global scale
manufacturing and logistic
capability means that
products and services can be
delivered with maximum costeffectiveness and with the
delivery speed and flexibility
that you expect.
eaton.com/telecompower
3
Eaton’s Telecommunications Power Solutions Business
Services Capability
Design Services
Integration Services
Power Monitoring
Eaton’s offers a wide range
of DC secure power services
including power quality
evaluation, sizing, design
consultancy, installation and
commissioning, full project
management and turnkey
integration. Our individually
tailored service contract plans
can provide ongoing service
maintenance, training, aftersales service, and repairs,
Eaton’s global presence
ensures quick response times
for all of our customers.
Skilled engineering staff can
provide a full design service
for DC power systems to
specifically suit individual
applications and sites.
Our telecommunications
integration services provide
complete install, testing and
integration services for any
type of communications or
other electronic equipment,
to world leading standards
of quality.
Eaton can provide 24 x
7 DC power system and
battery monitoring, and
provide remote diagnostics
to maximize responsiveness
and uptime, Monthly
performance reports and
trend analysis assist optimum
system performance.
World-Wide On-Site
Services
Eaton’s fully trained customer
service engineers can carry
out all installation tasks
or supervise and assist
local staff.
Typical projects Eaton has
completed include the
integration of network
access equipment into
roadside cabinets and the
on-site installation and
commissioning of telecoms
equipment.
Eaton is now applying this
expertise to the provision
of integration services
for original equipment
manufacturers and
network operators.
4EATON DC Power Solutions Catalogue
Eaton’s Telecommunications Power Solutions Business
After-Sales Service and
Repairs
Eaton DC Regional Repair
Sites, staffed by fully trained
technicians, are strategically
located around the world
to provide rapid turnaround
times. Individually tailored
service contracts are also
available so customers can
choose the ongoing service
package that best suits their
requirements.
Options include extended
warranty periods, unlimited
out-of- warranty repairs,
immediate replacement,
on-site maintenance,
and battery testing and
conditioning. Special terms
and conditions apply to some
DC services.
Training
Eaton offers a comprehensive
range of training courses
designed to provide the right
level of product knowledge
with practical demonstrations
and hands-on opportunities.
Courses can be arranged
at an Eaton location or at a
customer’s site.
eaton.com/telecompower
5
DC Power Solutions
Application and Product Selection
Guide for Eaton DC Power Solutions
Eaton DC Power Solutions
Application
Enterprise
PowerSolutions
Access Power
Solutions1
Metro
PowerSolutions2
Core
PowerSolutions3
1-744A, 24V or
48V
Up to 2500A,
24V or 48V
Up to 15,360A,
48V
Customer Premises
Equipment
PBX/VoIP
✓
✓
Wireless Access
✓
✓
Wireless
Mini/metro sites
✓
Base transceiver stations (BTS)
✓
✓
Base station controllers (BSC)
✓
✓
Main switches
Wireline
Fibre transmission systems
✓
Digital microwave radio
Broadband voice data services
✓
Satellite earth stations
1. Including DV2 (Data-Voice-Video) Power Solutions with APR rectifier modules.
2. Including DV2 (Data-Voice-Video) Power Solutions with NPR rectifier modules.
3. Systems with higher output are also available
6EATON DC Power Solutions Catalogue
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
DC Power
Solutions
Eaton
DC Power Solutions
3G Enterprise Power Solutions EPS2 Series
The Eaton® 3G Enterprise
Power Solutions are the ideal
solution for converged data
networks and low power telecommunications applications
requiring compact, efficient and
flexible DC power supplies.
This EPS2 series is a 19” rack
mounted system and is
available with up to two of the
Eaton 3G Enterprise or Access
48V rectifier modules providing
a total output of up to 4000W.
The versatile SC200 system
controller features a front
access USB port for ease of
system setup along with a
RS232 rear port and a 10BaseT
Ethernet port for remote
networking and
communications.
Communication features of the
SC200 system controller
include TCP/IP, SNMP and an
onboard web server allowing
access with standard web
browsers. The SC200 also
supports GSM cellular
(including text messaging) and
standard PSTN modems.
The Enterprise systems include
an integral DC distribution panel
with easy to fit push-in circuit
breakers and low voltage
disconnect contactor to prevent
over discharging of the optional
backup batteries.
Typical applications include
providing secure power for
customer premises equipment,
roadside cabinets, converged
VoIP/data networks, PoE, IP
routers and small PABX’s.
 19” rack mounting
 High power density
 Intelligent system controls
 Pre-configured software
 Onboard secure web server
 Push-in easy to fit circuit breakers
 Low voltage disconnect
 Fast on-line expansion of rectifiers (hot-swap)
 High efficiency and unity power factor
 Easy to use menu & full color display
 Optional batteries
 Compatible with Eaton’s Energy Saver (ES) rectifier
eaton.com/telecompower
7
DC Power Solutions
Technical Specifications
Input
AC Supply
Power Factor †
Efficiency †
Output
DC Output
Voltage Range
DC Output
Power
(maximum*) †
Nominal: 120V, 240V
Operating Range: 90V – 275V
>0.99 (50 – 100% Output Current)
>96% peak
>95% (20% to 100% load, 230Vac)
43 – 57.5V
Options
Battery*
Eaton Extended Battery Module (EBM)
5PX version - 5PXEBM48RT (available globally)
5130 version - 103006587-6591 (EMEA only)Weight:
29.5kg [65lb]
Dimensions (H,W,D*): 85mm (2U), 432mm (19”
mounting), 487mm
*Additional space is required at the rear for cables.
Typical Run time values* (see graph).
240V AC:
APR48-ES: 4.0kW
APR48-3G: 3.6kW
EPR48-3G: 1.8kW
120V AC:
APR48-ES: 2.3kW
APR48-3G: 2.2kW
EPR48-3G: 1.1kW
Battery Run Time (minutes)
* Based on two rectifiers fitted, refer to rectifier
data sheets.
Environmental
Operating
Temperature
Range
Rated:
-10°C to +50°C [-14°F to +122°F]
Extended*: -40°C to +70°C [-40°F to +158°F]
*Output current is derated above 50°C [122°F]
Mechanical
Dimensions
H,W,D
2U , 19” mounting, 14.1” [360mm]*
Equipment Power (watts))
* Additional clear depth space is required for
exhaust air.
System
System
Controller
DC Distribution
Module
SC200
12-way circuit breakers (2 x Battery, 10 x Load)
Circuit breaker type: Magnetic/Hydraulic, push fit
Battery circuit breakers: Heinemann AC1R Series
Typical ranges available: 30A, 40A, 50A, 60A, 70A
Communication
Features
Rectifier Blank
Panels
Software
DCTools
PowerManagerII
Load circuit Breakers: Heinemann JC1S Series
Typical ranges available: 6A,10A, 15A, 20A, 25A,
30A
USB direct
10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP,
Modbus-RTU and on board web server
RS232 to external PSTN or GSM modem (modem
not included)
For unused rectifier positions
Configuration software.
Free download from:
www.powerware.com/downloads
Remote control and monitoring software
 = Required number of battery modules.
*Battery times are approximate and vary depending
on factors such as:
- load configuration
- battery charge
- battery age and temperature.
* Other battery options available - consult your local
Eaton agent.
Battery Cables
CKBATT-02 Eaton EBM 5130 connection cable,
2000mm long
or CKBATT-01 ‘other batteries’ connection cable,
2000mm long
Equipment
Customer Equipment Connection Cable
Cable
CKLOAD-00 10-way connection loom, 1000mm long
EBM Rack
Included with the EBM as standard
Mounting Kit
Certifications
All products comply with International Standards.
North America
Europe
Australia and New Zealand
UL (Canada, USA), FCC Class B
CE
C-Tick
In the interests of continual product improvement all specifications are
subject to change without notice.
† Power factor, efficiency and DC output power are dependant on
rectifier model fitted. Refer to the rectifier data sheet for further
details.
8EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power
Solutions
Eaton
DC Power Solutions
3G Enterprise Power Solutions EPS5 Series
The Eaton® 3G Enterprise
Power Solutions are the ideal
solution for converged data
networks and low power telecommunications applications
requiring compact, efficient and
flexible DC power supplies.
The EPS5 series is a 19” rack
mounted system and is
available with up to five of the
Eaton 48V 3G Enterprise power
rectifier modules, providing a
total output of up to 4500W.
The modular design of the
system allows users to simply
add additional rectifiers and
batteries as required to meet
future growth of their network
power demand, thus, better
protecting the initial power
system investment.
The versatile SC200 system
controller features a front
access USB port for ease of
system setup along with a
RS232 rear port and a 10BaseT
Ethernet port for remote
networking and
communications.
Communication features of the
SC200 system controller
include TCP/IP, SNMP and an
onboard web server allowing
access with standard web
browsers.
The Enterprise systems include
an integral DC distribution panel
with easy to fit push-in circuit
breakers and low voltage
disconnect contactor to prevent
over discharging of the optional
backup batteries.
Typical applications include
providing secure power for
customer premises equipment,
roadside cabinets, converged
VoIP/data networks, PoE, IP
routers and small PABX’s.
 19” rack mounting
 High power density
 Intelligent system controls
 Pre-configured software
 Onboard secure web server
 Push-in easy to fit circuit breakers
 Low voltage disconnect
 Fast on-line expansion of rectifiers (hot-swap)
 High efficiency and unity power factor
 Easy to use menu & full color display
 Optional batteries
eaton.com/telecompower
9
DC Power Solutions
Technical Specifications
Input
AC Supply
Power Factor †
Efficiency †
Output
DC Output
Voltage Range
DC Output
Power
(maximum*) †
Nominal: 120V, 240V
Operating range: 90V – 275V
>0.99 (50 – 100% output current)
91% (50 – 100% output current)
43 – 57.5V
240V AC:
120V AC:
4.5kW
2.25kW
* Based on five rectifiers fitted, refer to EPR48-3G
rectifier data sheets.
Environmental
Operating
Temperature
Range
Options
Battery*
Eaton Extended Battery Module (EBM)
5PX version - 5PXEBM48RT (available globally)
5130 version - 103006587-6591 (EMEA only)
Weight: 29.5kg [65lb]
Dimensions (H,W,D*): 85mm (2U), 432mm (19”
mounting), 487mm
*Additional space is required at the rear for cables.
Typical run time values* (see graph).
Battery Run Time (minutes)
Rated:
-10°C to +50°C [-14°F to +122°F]
Extended*: -40°C to +70°C [-40°F to +158°F]
*Output current is derated above 50°C [122°F]
Mechanical
Dimensions
H,W,D
3U, 19” mounting, 13.2” [335mm]*
* Additional clear depth space is required for
exhaust air.
System
System
Controller
DC Distribution
Module
Equipment Power (watts))
SC200
12-way circuit breakers (2 x battery, 10 x load)
Circuit breaker type: magnetic/hydraulic, push fit
Battery circuit breakers: Heinemann AC1R Series
Typical ranges available: 30A, 40A, 50A, 60A, 70A
Communication
Features
Rectifier Blank
Panels
Software
DCTools
PowerManagerII
Load circuit breakers: Heinemann JC1S Series
Typical ranges available: 6A,10A, 15A, 20A, 25A,
30A
USB direct
10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP,
Modbus-RTU and on board web server
RS232 to external PSTN or GSM modem (modem
not included)
For unused rectifier positions
Configuration software.
Free download from:
www.powerware.com/downloads
Remote control and monitoring software
† Power factor, efficiency and DC output power are dependant on
rectifier model fitted. Refer to the rectifier data sheet for further
details.
10EATON DC Power Solutions Catalogue

= Required number of battery modules.
*Battery times are approximate and vary depending
on factors such as:
- load configuration
- battery charge
- battery age and temperature.
* Other battery options available - consult your local
Eaton agent.
Battery Cables
CKBATT-02 Eaton EBM 5130 connection cable,
2000mm long.
or CKBATT-01 ‘other batteries’ connection cable,
2000mm long.
Equipment
Customer equipment connection cable
Cable
CKLOAD-00 10-way connection loom, 1000mm long
EBM Rack
Included with the EBM as standard
Mounting Kit
Certifications
All products comply with international standards.
North America
Europe
Australia and New Zealand
UL (Canada, USA), FCC Class B
CE
C-Tick
In the interests of continual product improvement all specifications are
subject to change without notice.
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
DC Power
Solutions
Eaton
DC Power Solutions
Enterprise Extended Battery Module
The Eaton® 3G Enterprise
Extended Battery Module
(EBM) is designed as an
optional integrated backup
power source to the 3G
Enterprise Power Systems,
providing secure power during
AC grid failure for anything from
orderly shutdowns through to
extended runtimes for
continuity of service.
Eaton 5PX version pictured
Multiple battery modules can
be connected together to
achieve increased backup
capacity for a given output
demand.
The scalability of the EBM
ensures that your investment is
protected into the future as the
demands of your network
increase. Simply add more
EBM modules as your network
grows.
EBM has an 18Ahr capacity and
is service maintenance free for
the life of the battery module.
Battery function is monitored
and controlled by the power
system controller for complete
battery protection.
This module is slim and rack
mountable to suit the likely
applications for these systems
such as server room racks.
The battery modules use
simple ‘plug and play’ cables for
connecting the Enterprise
Power Solution. No specialized
tools are required, thus making
installation very easy in an IT
environment.
 Easy to install
 Slimline 19” rack mounting
 Extended runtime -18Ahr capacity
 Modular and scaleable
 Service maintenance free VLRA batteries
eaton.com/telecompower
11
DC Power Solutions
Technical Specifications
Output
DC Output
Voltage
DC Output
Capacity
Mechanical
Weight
Dimensions
H,W,D
48V nominal
18Ahr
Maximum input/output current should not exceed
55Amps
29.5kg
85mm (2U), 432mm (19” mounting), 487mm*
* Additional space is required at the rear for cables.
Battery
Typical Run Time Values*
Battery Run Time
(minutes)
Equipment Power (watts))

= Required number of battery modules.
*Battery times are approximate and vary depending
on factors such as:
- load configuration
- battery charge
- battery age and temperature.
Order Number
Eaton Extended Battery Module (EBM)
5PX version - 5PXEBM48RT (available globally)
5130 version - 103006587-6591 (EMEA only)
Certifications
All products comply with international standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
North America
UL listed
Europe
CE
In the interests of continual product improvement all specifications are
subject to change without notice.
12EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
DC Power
Solutions
Eaton
DC Power Solutions
3G Access Power Solutions APS3 and APS6 Series
 19” sub-rack
.
 Modular 3U and 6U options
 Up to 6 rectifier modules
 Pre-configured software
 High power density (24/48V: 300/250A, 6U, 19”)
 Multiple AC option (1Ø, 3Ø, 2Ø)
 Fast on-line expansion of rectifiers (hot-swap)
 High efficiency and unity power factor
 Priority and non priority options for DC distributions
 Compatible with Eaton Energy Saver (ES) Rectifiers
®
The Eaton 3G Access Power
Solutions are ideal for low to
medium power telecommunications applications, offering
compact, efficient, flexible and
reliable secure DC power
supply.
These 19” rack mount systems
are available with up to 3 or 6 of
the Eaton 3G Access power
rectifier modules as either 24V
or 48V with output up to 280A.
For superior operating
efficiency to further reduce
operating costs, these systems
are also compatible with Eaton
Energy Saver (ES) Access
power rectifiers which provides
operating efficiency in excess
of 96%.
The systems include an integral
DC distribution panel with a
range of MCB and Low Voltage
Disconnect (LVD) options
available.
The SC200 series of system
controller offers highly advance
control and monitoring features
including Smart Alarms – a
configurable logic for
automated site energy control.
The SC200 also offers a
complete array of
communications options with
Ethernet, GSM cellular
(including text messaging),
standard modem and TCP/IP
communications options. The
slightly lower specification
SC100 is also available.
Typical applications include
providing secure power for
customer premises equipment,
roadside terminals, data
networks and IP routers. The
3G Access Power Solutions are
pre-configured and all system
settings are fully adjustable in
software and stored in
transferable, configuration files
for repeatable and quick onestep system set-up.
eaton.com/telecompower
13
DC Power Solutions
Technical Specifications
Input
AC Supply†
Power Factor†
Efficiency†
Output
DC Output
Voltage Range
DC Output
Power
(maximum)*
Environmental
Operating
Temperature
Range*
Mechanical
Dimensions
H,W,D
100 – 240V, 50 – 60Hz (nominal)
175 – 275V full power output up to 50°C [122°F]
90 – 175V reduced power output
>0.99 (50 – 100% Output Current)
APR48-3G : 92% (50 – 100% Output Current)
APR48-ES : >96% peak,
>95% (20% to 100% load, 230Vac)
21.5V – 32V / 43-57.5V
Software
DCTools
PowerManagerII
Configuration software.
Free download from:
www.powerware.com/downloads
Remote control and monitoring software
Certifications
All products comply with international standards.
In the interests of continual product improvement all specifications are
subject to change without notice.
APS3-300
48V: 6.00kW
24V: 4.32kW
APS6-300
48V: 8.90kW
APS6-500
48V: 12.0kW
24V: 8.64kW
* Ratings are stated without LVD’s fitted. In some
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB derating factors.
-40°C to +70°C [-40°F to +158°F]
* Refer to rectifier data sheet for more information.
Output current is derated above 50°C [122°F] and
below -10°C [14°F]
APS3-300: 3U, 19” mounting, 315mm [12.4”]*
APS6-300: 6U, 19” mounting, 335mm [13.2”]*
APS6-500: 6U, 19” mounting, 335mm [13.2”]*
* Additional clear space is required for exhaust air.
System
System
Controller
DC Distribution
Module
SC200 or SC100
APS3-300:
APS6-300:
APS6-500:
Communication
Features
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
Options
12-way circuit breakers
(2 x battery, 10 x load)
20-way circuit breakers
(4 x battery, 16 x load)
20-way circuit breakers
(4 x battery, 16 x load)
USB direct*
10BaseT Ethernet*, TCP/IP*, SNMP*, ModbusTCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
APS3-300:
optional battery LVD
APS6-300:
optional 200A LVD’s for battery
or load, or both.
APS6-500: optional 400A LVD’s for battery
or load, or both.
For unused rectifier positions
External Surge Protection
† Power factor, efficiency, AC voltage range and output power is
dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
.
14EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power
Solutions
Eaton
DC Power Solutions
3G
- 3GAccess
AccessPower
PowerSolutions
Solutions
APS6-600
APS6-600Series
Series
Features
• 19” sub-rack
• Compact 6U system
• Up to 6 rectifier modules
• Pre-configured software
• High power density (48V: 360A, 6U, 19”)
• Multiple AC option (1Ø, 3Ø, 2Ø)
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Priority and non priority options for DC distributions
• Compatible with Eaton’s Network Energy Saver (ES) Rectifier
48V secure DC power up to
18kW.
The Eaton® 3G Access Power
Solutions are ideal for low to
medium power telecommunications applications, offering
compact, efficient, flexible and
reliable secure DC power
supply.
This 19” rack mount system is
available with up to 6 of the
Eaton 3G, NPR48-ES Network
power rectifier modules with a
total output up to 360A. For
superior operating efficiency to
further reduce operating costs,
this system is offered as
standard with Eaton Energy
Saver (ES) Network power
rectifier which provides
operating efficiency in excess
of 96%.
The systems include an integral
DC distribution panel with a
range of MCB and Low Voltage
Disconnect (LVD) options
available.
The SC200 series of system
controller offers highly
advanced control and
monitoring features including
Smart Alarms – a configurable
logic for automated site energy
control. The SC200 also offers a
complete array of
communications options with
Ethernet, GSM cellular
(including text messaging),
standard modem and TCP/IP
communications options. The
slightly lower specification
SC100 is also available.
Typical applications include
providing secure power for
customer premises equipment,
roadside terminals, data
networks and IP routers. The
3G Access Power Solutions are
pre-configured and all system
settings are fully adjustable in
software and stored in
transferable configuration files
for repeatable and quick onestep system set-up.
eaton.com/telecompower
15
DC Power Solutions
Technical Specifications
Input
AC Supply†
Power Factor†
Efficiency†
Output
DC Output
Voltage Range
DC Output
Power
(maximum)*
Environmental
Operating
Temperature
Range*
Mechanical
Dimensions
H,W,D
System
System
Controller
DC Distribution
Module
Communication
Features
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
Options
100 – 240V, 50 – 60Hz (nominal)
185 – 275V full power output up to 50°C [122°F]
90 – 185V reduced power output
>0.99 (50 – 100% Output Current)
NPR48-ES : >96% peak,
>95% (20% to 100% load, 230Vac)
43.2-57.5V
48V: 18kW
Software
DCTools
PowerManagerII
Configuration software.
Free download from:
www.powerware.com/downloads
Remote control and monitoring software
Certifications
CE
In the interests of continual product improvement all specifications are
subject to change without notice.
* Ratings are stated without LVDs fitted. In some
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB derating factors.
-40°C to +70°C [-40°F to +158°F]
* Refer to rectifier data sheet for more information.
Output current is derated above 50°C [122°F] and
below -10°C [14°F]
6U, 19” mounting, 335mm [13.2”]*
* Additional clear space is required for exhaust air.
SC200, Option for SC100
20-way circuit breakers
(4 x battery, 16 x load)
USB direct*
10BaseT Ethernet*, TCP/IP*, SNMP*, ModbusTCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Optional 400A LVDs for battery or load, or both.
For unused rectifier positions
External Surge Protection
† Power factor, efficiency, AC voltage range and output power are
dependent on the rectifier module. Refer to the rectifier data sheet for
more information.
.
16EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power
Solutions
Eaton
DC Power Solutions
3G Access Power Solutions APS12 Series
The Eaton® 3G Access Power
Solutions are ideal for low to
medium power telecommunications applications, offering
compact, efficient, flexible and
reliably secure DC power
supply.
This 19” rack mount system
has an integrated distribution
panel and is available with up to
12 of the 48V Eaton 3G Access
Power Rectifier modules or, for
superior operating efficiency,
with Energy Saver (ES) Rectifier
modules with output up to
360A.
The advanced SC200 system
controller offers high-level
communications capability for
real time information. It also
has built-in intelligence for
optimizing system efficiency,
and comprehensive alarm and
system status notifications,
which are all designed to
minimize operational expenses.
A comprehensive range of
other controller features
ensures maximum battery life
and optimum system
performance under a wide
range of environmental
conditions.
The 3G Access Power
Solutions are pre-configured
and all system settings are fully
adjustable in software and
stored in transferable,
configuration files for
repeatable and quick one-step
system set-up.
Typical applications include
providing secure power for
cellular base stations, roadside
terminals, data networks and IP
routers.
 Compact 9U, 19” sub-rack
 Up to 12 rectifier modules
 Compatible with Eaton Energy Saver (ES) Rectifiers
 Pre-configured software
 High power density (400A/9U)
 Dual AC input
 Fast on-line expansion of rectifiers (hot-swap)
 High efficiency and unity power factor
 Priority and non priority options for DC distributions
eaton.com/telecompower
17
DC Power Solutions
Technical Specifications
Input
AC Supply†
Power Factor†
Efficiency†
Output
DC Output
Voltage Range
DC Output
Power
(maximum) *
Environmental
Operating
Temperature
Range
Mechanical
Dimensions
H,W,D
100 – 240V, 50 – 60Hz (nominal)
175 – 275V full power output up to 50°C [122°F]
90 – 175V reduced power output
Dual AC input - 1Ø, 2Ø or 3Ø (one supply feed per
6-rectifier shelf)
>0.99 (50 – 100% Output Current)
APR48-3G : 92% (50 – 100% Output Current)
APR48-ES : >96% peak
>95% (20% to 100% load, 230Vac)
43 – 57.5V
APR48-3G : 17.2kW @ 48V
APR48-ES : 17.2kW @ 48V
* Ratings are stated without LVD’s fitted. In some
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB de-rating factors.
Software
DCTools
PowerManagerII
Configuration software.
Free download from:
www.powerware.com/downloads
Remote control and monitoring software
Certifications
All products comply with international standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
Europe
Australia /
New Zealand
CE
C-tick
In the interests of continual product improvement all specifications are
subject to change without notice.
-40°C to +70°C [-40°F to +158°F]
Output current is derated above 40°C [104°F] and
below -10°C [14°F]
9U, 19” mounting, 335mm [12.4”]*
* Additional clear space is required for exhaust air.
System
System
Controller
DC Distribution
Module
Communication
Features
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
Options
SC200 or SC100
20-way circuit breakers (4 x Battery, 16 x Load)
USB direct*
10BaseT Ethernet*, TCP/IP*, SNMP*, ModbusTCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Optional battery LVD, or non priority LVD, or battery
and non priority LVD’s. (Contactors 400A
rated)
For unused rectifier positions
External Surge Protection
† Power factor, efficiency, AC voltage range and output power is
dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
18EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power
Solutions
Eaton
DC Power Solutions
DV2
Solutions
DV2--3G
3GAccess
AccessPower
Power
Solutions
with
withBatteries
Batteries
48V and 24V integrated
systems up to 20kW
The Eaton® Data-Voice-Video
Access Power Solutions
range of DC power systems is
designed to provide small to
medium network applications
with compact, efficient, flexible
and secure DC power.
These DC power systems can
accommodate either the 24V or
48V rectifier modules, including
Eaton’s Energy Saver
Rectifiers, and up to eight 24V
or four 48V strings of high
capacity VRLA batteries. All
systems include an integral AC
and DC distribution with
flexible combinations of fuses
and MCBs, and an SC200 or
SC100 system controller. Low
Voltage Disconnect (LVD)
options are also available.
The advanced SC200 system
controller offers high-level
communications capability for
real time information. It also
has built-in intelligence for
optimizing system efficiency,
and comprehensive alarm and
system status notifications,
which are all designed to
minimize operational expenses.
A comprehensive range of other
controller features ensures
maximum battery life and
optimum system performance
under a wide range of
environmental conditions.
Systems are pre-configured for
fast installation and set-up and
fully adjustable and transferable
for repeatable one-step system
set-up.
Typical applications are
providing secure power for
cellular base transceiver
stations, WiMAX nodes, base
station controllers, longdistance transmission systems,
local office switches and other
telecommunication switch
installations requiring
distributed power.
Typical Applications:
• Wireless BTS sites (CDMA
GSM/3G/UMTS)
• Transmission terminals
• Access nodes
• Local and central office
switching
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Integrated batteries and battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
• Compatible with Eaton Energy Saver (ES) Rectifiers
eaton.com/telecompower
19
DC Power Solutions
Technical Specifications
Specification
Input
AC Supply†
Power Factor†
Efficiency†
Output
DC Output
Voltage Range
Typical DC
Output Power†*
Environmental
Operating
Temperature
Range*
Mechanical
Dimensions
H,W,D
Weight
System
Rectifiers
System Controller
Communications
Features
Batteries
3P+N+PE, 3P+PE, 2P+PE, 1P+N+PE
50/60Hz (nominal)
>0.99 (20 – 100% Maximum System Current)
>96% peak
>95% (20% to 100% load, 230Vac)
Options
AC Distribution
DC Distribution
20 – 57.5V
APR24-3G : 14.4kW (500A @ 28.8V) † or
APR48-3G : 18 kW (375A @ 48V)
APR48-ES : 20kW (416A @ 48V)
* Ratings are stated without LVD’s fitted. In some
cases lower ratings may result when LVDs are
used.
-25°C to +50°C
* Output current is derated above 50°C [122°F]
Refer to rectifier data sheet for more information.
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
870kg [1914lb]
Typical maximum with 10 rectifier modules and 4
x 48V/150Ah battery strings.
APR24-3G
APR48-3G
APR48-ES
SC100/SC200
USB direct*
10BaseT Ethernet*, TCP/IP*, SNMP*, ModbusTCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Typically up to 4 strings @ 48V, or 8 strings @ 24V,
600Ah total capacity.
Other battery configurations available.
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
SiteSure
CellSure
Software
PowerManagerII
DCTools
Coordinated transient protection up to 40kA, 8/20μs
Incoming isolator
Individual rectifier MCBs
Up to 4 groups of MCBs or fuses. Each group
comprises up to:
9 x 18mm MCBs (1-63A), or
6 x 27mm MCBs (10-125A), or
4 x DIN00 HRC fuses (20-160A)
Custom options available on request.
Single or dual LVD configured as battery
disconnect.
For unused rectifier positions
Input/output modules to monitor and control
external equipment
Comprehensive battery monitoring and fault
diagnosis system with patented state-of-health
algorithms.
Remote control and monitoring software
Configuration Software. Free download from
www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
Europe
CE
Australia /
C-tick, Seismic rating to NZS4203
New Zealand
In the interests of continual product improvement all specifications are
subject to change without notice.
† Power factor, efficiency, AC voltage range and output power is
dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
20EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
DC Power
EatSolutions
on DC Power Solutions
DV2
Solutions
DV2--3G
3GMetro
MetroPower
Power
Solutions
48V integrated systems up
to 80kW
The Eaton® Data-Voice-Video
Metro Power Solutions range
of DC power systems is
designed for telecommunications network applications
requiring compact, efficient and
flexible DC power.
These DC power systems use
Eaton APR-3G or, for superior
operating efficiency, can be
fitted with Energy Saver (ES)
rectifier modules. AC and DC
distribution is integral with
flexible combinations of fuses
and MCBs, and an SC200
system controller. Low Voltage
Disconnect (LVD) options are
also available.
The advanced SC200 system
controller offers high-level
communications capability for
real time information. It also
has built-in intelligence for
optimizing system efficiency,
and comprehensive alarm and
system status notifications,
which are all designed to
minimize operational expenses.
A comprehensive range of
other controller features
ensures maximum battery life
and optimum system
performance under a wide
range of environmental
conditions.
Eaton DV2 Metro Power
Solutions are pre-configured for
fast installation and set-up. All
system settings are fully
adjustable in software and
stored in transferable configuration files for repeatable onestep system set-up.
Typical applications are
providing 48V standby power
for end-of-row and centralized
architecture such as local and
central office switches and
other large switch installations,
wireless switching centers and
long-distance transmission
systems.
Typical Applications:
• Wireless MSC sites
(CDMA/GSM/3G UMTS)
• Transmission terminals
• Local and central office
switching
• Point of presence (POP)
sites
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
• Compatible with Eaton Energy Saver (ES) Rectifiers
eaton.com/telecompower
21
DC Power Solutions
Technical Specifications
Specification
Input
AC Supply†
Power Factor†
Efficiency†
Output
DC Output
Voltage Range
Typical DC
Output Power†*
Environmental
Operating
Temperature
Range*
Mechanical
Dimensions
H,W,D
Weight
System
Rectifiers
System Controller
Communications
Features
3P+N+PE, 3P+PE, 2P+PE, 1P+N+PE
50/60Hz (nominal)
Other options available depending on system
capacity.
>0.99 (20 – 100% Maximum System Current)
>96% peak
>95% (20% to 100% load, 230Vac)
Options
AC Distribution
DC Distribution
40 – 57.5V
APR48-3G : 72kW (1500A @ 48V)
APR48-ES : 80kW (1667A @ 48V)
* Ratings are stated without LVD’s fitted. In some
cases lower ratings may result when LVDs are
used.
-25°C to +50°C
* Output current is derated above 50°C [122°F].
Refer to rectifier data sheet for more information.
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
200kg [443lb]
Typical configuration with 40 APR-3G rectifier
modules.
APR48-3G
APR48-ES
SC100/SC200
USB direct*
10BaseT Ethernet*, TCP/IP*, SNMP*, ModbusTCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
SiteSure
CellSure
Software
PowerManagerII
DCTools
Coordinated transient protection up to 40kA, 8/20μs
Incoming isolator
Individual rectifier MCBs
A wide range of DC distribution elements are
available including:
24 x 18mm MCBs (1-63A)
16 x 27mm MCBs (10-125A)
10 x DIN00 type HRC fuses (20-160A)
6 x DIN1 type HRC fuses (63-250A)
6 x DIN2 type HRC fuses (100-400A)
4 x DIN3 type HRC fuses (400-630A)
4 x DIN4 type HRC fuses (800-1200A)
Single or dual LVD can be configured as battery or
load disconnect including non-priority load
disconnect.
For unused rectifier positions
Input/output modules to monitor and control
external equipment
Comprehensive battery monitoring and fault
diagnosis system with patented state-of-health
algorithms.
Remote control and monitoring software
Configuration Software. Free download from
www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
Europe
CE
Australia /
C-tick, Seismic rating to NZS4203
New Zealand
In the interests of continual product improvement all specifications are
subject to change without notice.
† Power factor, efficiency, AC voltage range and output power is
dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
22EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
DC Power
Solutions
Eaton
DC Power Solutions
DV2-N
Power
Solutions
DV2-N--3G
3GCore
Core
Power
Solutions
48V integrated systems up
to 126kW
The Eaton® Data-Voice-Video
Core Power Solutions range of
DC power systems is designed
for telecommunications
network applications requiring
compact, efficient and flexible
DC power.
These DC power systems use
the Eaton Energy Saver NPR-ES
rectifier module for superior
operating efficiency. AC and DC
distribution is integral with
flexible combinations of fuses
and MCBs, and an SC200
system controller. Low Voltage
Disconnect (LVD) options are
also available.
The advanced SC200 system
controller offers high-level
communications capability for
real time information. It also
has built-in intelligence for
optimizing system efficiency,
and comprehensive alarm and
system status notifications,
which are all designed to
minimize operational expenses.
A comprehensive range of
other controller features
ensures maximum battery life
and optimum system
performance under a wide
range of environmental
conditions.
Eaton DV2 Core Power
Solutions are pre-configured for
fast installation and set-up. All
system settings are fully
adjustable in software and
stored in transferable
configuration files for
repeatable one-step system
set-up.
Typical applications are
providing 48V standby power
for end-of-row and centralized
architecture such as local and
central office switches and
other large switch installations,
wireless switching centers and
long-distance transmission
systems.
Typical Applications:
• Wireless MSC sites
(CDMA/GSM/3G UMTS)
• Transmission terminals
• Local and central office
switching
• Point of presence (POP)
sites
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
• Standard fitment of the Eaton Energy Saver (ES) Rectifier
eaton.com/telecompower
23
DC Power Solutions
Technical Specifications
Specification
Input
AC Supply†
Power Factor†
Efficiency†
Output
DC Output
Voltage Range
Typical DC
Output Power†*
Environmental
Operating
Temperature
Range*
Mechanical
Dimensions
H,W,D
Weight
System
Rectifiers
System Controller
Communications
Features
3P+N+PE, 3P+PE
50/60Hz (nominal)
Other options available depending on system
capacity.
>0.99 (20 – 100% Maximum System Current)
>96% peak
>95% (20% to 100% load, 230Vac)
Options
AC Distribution
DC Distribution
43.2 – 57.5V
NPR48-ES : 126kW (2520A @ 50V)
* Ratings are stated with LVDs not fitted. In some
cases lower ratings may result when LVDs are
used.
-25°C to +45°C
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
SiteSure
CellSure
* Output current is derated above 50°C [122°F].
Refer to rectifier data sheet for more information.
2200mm [86.6”], 600mm [23.6”], 600mm [23.6”]
230kg [443lb]
Typical configuration with 42 NPR-ES rectifier
modules.
NPR48-ES – up to 42 rectifiers
SC100/SC200
USB direct*
10BaseT Ethernet*, TCP/IP*, SNMP*, ModbusTCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Software
PowerManagerII
DCTools
Coordinated transient protection up to 40kA, 8/20µs
Incoming isolator
Individual rectifier MCBs
A wide range of DC distribution elements are
available including:
24 x 18mm MCBs (1-63A)
16 x 27mm MCBs (10-125A)
10 x DIN00 type HRC fuses (20-160A)
6 x DIN1 type HRC fuses (63-250A)
6 x DIN2 type HRC fuses (100-400A)
4 x DIN3 type HRC fuses (400-630A)
4 x DIN4 type HRC fuses (800-1200A)
Single or dual LVD can be configured as battery or
load disconnect including non-priority load
disconnect.
For unused rectifier positions
Input/output modules to monitor and control
external equipment
Comprehensive battery monitoring and fault
diagnosis system with patented state-of-health
algorithms.
Remote control and monitoring software
Configuration Software. Free download from
www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
Europe
CE
Australia /
C-tick, Seismic rating to NZS4203
New Zealand
In the interests of continual product improvement all specifications are
subject to change without notice.
† Power factor, efficiency, AC voltage range and output power
aredependent on the rectifier module. Refer to the rectifier data sheet
for more information.
24EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power
Solutions
Eaton
DC Power Solutions
DV2
Solutions
DV2 --3G
3GCore
CorePower
Power
Solutions
48V integrated systems up
to 750kW
The Eaton® Data-Voice-Video
Core Power Solutions range of
DC power systems is designed
for telecommuni-cations
network applications requiring
high powered, efficient and
flexible DC power supplies.
These DC power systems use
Eaton CR48-3G rectifier
modules and include an integral
AC and DC distribution with
flexible combinations of fuses
and MCBs, and an SC200
system controller. Low voltage
disconnect (LVD) options are
also available. DC distribution
cabinets can be connected in
parallel where additional
distribution space is required.
Systems up to 4000A can be
configured using internal
horizontal busbars, and up to
15,000A using external
busbars.
Intelligent system management
features include battery
temperature compensation,
fast charge, battery current
limit, automatic equalize
charging and automatic battery
condition monitoring.
Typical applications are
providing 48V standby power
for centralized architecture such
as local and central office
switches and other large switch
installations, wireless switching
centers, long-distance
transmission systems and data
centers.
Eaton DV2 Core Power
Solutions are pre-configured for
fast installation and set-up. All
system settings are fully
adjustable in software and
stored in transferable
configuration files for
repeatable one-step system
set-up.
Typical Applications
• Wireless MSC sites
(CDMA/GSM/3G UMTS)
• Local and central office
switching
• Point of presence (POP)
sites
• Data centers
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
eaton.com/telecompower
25
DC Power Solutions
Technical Specifications
Input
Nominal AC
Supply
Power Factor
Efficiency
Output
DC Output
Voltage Range
Typical DC
Output Power
Environmental
Operating
Temperature
Range
Mechanical
Dimensions
H,W,D
Weight
System
System Controller
3P+PE, ∆ 208VAC
3P+N+PE, Y 230/400VAC
50/60Hz
>0.99* (20 – 100% Maximum System Current)
up to 92%*
Options
AC Distribution
DC Distribution
40 – 58V
46kW - 750kW †
-25°C to +50°C*
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
200kg [443lb]
Typical configuration with 16 CR48-3G rectifier
modules.
SC200
* Refer to rectifier specifications for more information.
† System output power will vary depending on rectifiers and batteries
selected.
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
SiteSure
CellSure
Software
PowerManagerII
DCTools
Coordinated transient protection up to 40kA, 8/20µs
Incoming isolator
Individual rectifier MCBs
A wide range of DC distribution elements are
available including:
24 x 18mm MCBs (1-63A)
16 x 27mm MCBs (10-125A)
10 x DIN00 type HRC fuses (20-160A)
6 x DIN1 type HRC fuses (63-250A)
6 x DIN2 type HRC fuses (100-400A)
4 x DIN3 type HRC fuses (400-630A)
4 x DIN4 type HRC fuses (800-1200A)
Single or dual LVD can be configured as battery or
load disconnect including non-priority load
disconnect.
For unused rectifier positions
Input/output modules to monitor and control
external equipment
Comprehensive battery monitoring and fault
diagnosis system with patented state-of-health
algorithms.
Remote control and monitoring software
Configuration Software. Free download from
www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
China
MII
Europe
CE
Australia /
C-tick, Seismic rating to NZS4203
New Zealand
In the interests of continual product improvement all specifications are
subject to change without notice.
26EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Customer
Premises
Equipment
Eaton
DC Power
Solutions
MPS12-30
MPS12-30Micro Power Solution
SecurePower
MicroSolution
Power Solution for In-Home Optical Network Terminals (ONT)
Micro
Eaton’s MPS12-30 Micro
Power Solution provides secure
DC power for ‘next generation’
customer premise equipment
(CPE) including fibre based
communication and IP
telephony applications. An
integrated battery provides
secure power backup to critical
services such as phone,
medical alert, home automation
and security during a
commercial (mains) AC power
outage.
The MPS12-30 is the ideal
secure power protection unit
where continuation of critical
services is the objective.
Typical backup time on battery
power is approximately 4 to 8
hours depending on factors
such as usage, battery age,
state of charge, and
environmental conditions. The
MPS12-30 indoor solution
greatly improves battery service
life compared to comparable
outdoor designs.
Features
• Universal input range of 80 - 260VAC
• 12V DC (30W max.) output
• Integrated, hot-swappable battery backup allows replacement
by the owner, without power interruption
• Microprocessor controlled for maximizing reliability
• Audible power failure alarm with mute
• Digital outputs for remote monitoring
• Wall mountable design for flexibility
• Multiple LED design for AC power and battery status
indications
eaton.com/telecompower
27
Customer Premises Equipment
Technical Specifications
Brief Technical Specifications
AC Supply
Figure 1: 12V/7Ah Battery Capacity
Input range: 80-260Vac
Typical Backup time
Input frequency Range: 45-65Hz
30
Inlet: IEC inlet
Output power (max.): 30W
Nominal voltage:
12VDC
Output Voltage Range:
10.5 – 13.8VDC
Tolerance:
10.5V (-0.2V,+0.25V)
13.8V (-0.35V, +0.15V)
Output Protection:
80%
10Amps fuse soldered on PCB
Battery
Typical type/rating: 12V/7Ah (see figure 1)
25
20
Load (Watts)
DC Output
15
10
Discharge prevention: 10.5V ± 0.5V
Rated charging voltage: 13.7V ± 0.25V
Recharge time (internal battery): 4 hours to
90% without load after complete discharge
Charge current: 2.5A maximum
5
0
2
4
6
8
10
12
14
16
18
20
Time (Hours)
Hot swappable
LED Indicator
AC mode: green LED continuous
Backup mode: yellow LED continuous
Battery low: yellow LED flashing
Battery replace: red LED flashing
Battery missing: red LED continuous
*Battery times are approximate and vary depending
on factors such as:
- battery type
- load configuration
- battery charge
- battery age and temperature.
Fault: red LED continuous
Battery self-test: green LED flashing
Audible Alarm
Battery mode: every 5 seconds
Battery low: every 1 second
Battery replace: every 2 seconds
Battery missing: continuous
Fault: continuous
Physical Specification
Weight of unit: 3.5kgs
Dimensions H, W, D: 358mm, 120mm,
85.6mm
Operating temperature: 0°C to 40°C
Operating humidity: 0% to 90%
Operating elevation: 0 to 3000m
Certifications
All products comply with international standards.
Europe:
CE
In the interests of continual product improvement all specifications are subject
to change without notice. Performance ratings are valid with all other variables
at Nominal. Specifications guaranteed over rated operating range.
28EATON DC Power Solutions Catalogue
Country/Region Product Variance
Standard Product
MPS12-30 - Micro Power Solution, 12V, 30Watt, Includes
Battery. AC cordset not included.
United Kingdom
MPS12-30-UK - Micro Power Solution, 12V, 30Watt, Includes Battery
and UK 3pin cordset.
European Union
MPS12-30-EU - Micro Power Solution, 12V, 30Watt, Includes Battery
and Schucko cordset.
Australia and New Zealand
MPS12-30-ANZ - Micro Power Solution, 12V, 30Watt, Includes
Battery and Australia/New Zealand cordset.
North America
MPS12-30-NA - Micro Power Solution, 12V, 30Watt, Includes Battery
and North America cordset.
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Inverter Power
EatonSolutions
DC Power Solutions
Matrix™ Modular Inverter
The Eaton® Matrix™ Modular
Inverter Solution is an
integrated inverter power
system designed for
applications where a very high
reliability AC supply is required.
The Matrix modular design
ensures maximum flexibility to
configure solutions to
customers’ requirements.
Modules include inverters,
Static Transfer Switch,
controller, interface module and
Maintenance Bypass Module.
With its versatile "building
block” design and n+x
redundant configuration, the
Matrix ensures reliable
telecommunication and
industrial AC power.
The Matrix Static Transfer
Switch provides automatic and
instantaneous load transfer
between mains power and
inverter power and back again,
to ensure uninterrupted AC
supply to sensitive electronic
equipment.
The Matrix solution uses digital
microprocessor control. The
monitoring controller gives realtime system status through
comprehensive LCD /LED
displays, and allows program
settings through the display
panel.
With the Matrix communication
interface module installed, you
can control and monitor the
system remotely.
 Ultimate high power density reducing space demand
 Hot-pluggable connection allows module addition or removal
without interruption to AC supply
 Versatile modular design allows a variety of configurations for
different power needs
 Capacity up to 18kVA
 n+x redundancy
 Single phase 120Vac or 230Vac output options
 High efficiency, >89%
 Comprehensive LCD/LED display provides system status, and
user-friendly panel eases program settings
 Optional maintenance bypass switch with integrated AC
distribution
 Optional USB/RS232/RS485 communication for local and
remote management
eaton.com/telecompower
29
Inverter Power Solutions
Technical Specifications
DC Input
Nominal Voltage
Operating Range
Surge Protection
Input Protection
AC Output
Output
Waveform
Output power
Power factor
Nominal Output
Frequency
Crest factor
THD
Efficiency
Overload
Compliance
Conducted (AC)
Conducted (DC)
Radiated
Modules
Inverter
Static Transfer
Switch
Controller
Shelf
48Vdc
40.5Vdc ~ 58Vdc
Telcordia GR-1089 CORD, ANSI C62.41-IEEE, STD
587-1980
Reverse polarity protection
Mechanical
Inverter Shelf
50A STS Shelf
50A MBS/DU
Pure sine wave
18kVA (max)
0.8
110/115/120Vac
208/220/230/240Vac
50/60Hz ±0.5%
3:1
<3%, linear load
<5%, non-linear load
Min 88% at rated load
1.5*Inom >20s
1.25*Inom temperature controlled
EN55022 (Class A)
EN300386
EN55022 (Class A)
INV-4810E: 1000VA/800W inverter module
INV-4810: 1000VA/800W inverter module
INV-4815E: 1500VA/1200W inverter module
INV-4815: 1500VA/1200W inverter module
INV-STS-050: 50A static transfer switch
INV-STS-100: 100A static transfer switch
INV-MC-1000: Controller module
INV-IFC-1000: RS232/USB/RS485 interface module
INV-SS-2-1U: Chassis for two inverters (1U)
INV-STSSS-1U: Chassis for controller/STS-050 (1U)
INV-STSSS-2U: Chassis for controller/STS-100 (2U)
INV-MBSDU-50: 50A maintenance bypass, power
distribution module (2U)
INV-MBSDU-100: 100A maintenance bypass
module (2U)
100A STS Shelf
100A MBS
INV-SS-2-1U:
(HxWxD) 1U x 19” x 330mm (1.75”x19”x13”)
Weight 2.7kg (6lb)
INV-STSSS-1U:
(HxWxD) 1U x 19” x 330mm (1.75”x19”x 13”)
Weight 2.7kg (6 lb)
INV-MBSDU-50:
(HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”)
Weight 7.0kg (15.4lb)
INV-STSSS-2U:
(HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”)
Weight 3kg (6.6 lb)
INV-MBS-100: ‘
(HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”)
Weight 7.0kg (15.4lb)
Maximum Number of Inverter Modules for Parallel Operation
(Max Power)
Model
Without STS
With STS-050 With STS-100
INV-4810
12 (12kVA)
6 (6kVA)
12 (12kVA)
INV-4810E
12 (12kVA)
12 (12kVA)
12 (12kVA)
INV-4815
12 (18kVA)
4 (6kVA)
8 (12kVA)
INV-4815E
12 (18kVA)
8 (12kVA)
12 (18kVA)
Certifications
All products comply with international standards including CE and UL.
In the interests of continual product improvement all specifications are
subject to change without notice.
30EATON DC Power Solutions Catalogue
Eaton and Matrix are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
InverterEaton
PowerDC
Solutions
Power Solutions
Matrix™ 2000 Standalone Inverter












The Eaton® Matrix™ 2000
Standalone Inverter is designed
Designed for telecom applications
for use in telecommunications
applications where a very reliable
Pure sine wave output
AC supply is required. The high
Unity power factor (full 2000 watt output power)
efficiency and compact size makes
Significant overload capability, 120% continuously, 200% for 5 seconds the Matrix 2000 Inverter an
outstanding solution for powering
High efficiency, >91%
all types of critical AC equipment.
High power density
The Matrix 2000 Standalone
Built in Static Transfer Switch (STS)
Inverter provides 2000W of
DSP design for improved reliability and performance
reliable AC power in a 1U x 19”
Single phase 120Vac or 230Vac output options
rack mount package that includes
a built-in Static Transfer Switch
Comprehensive LCD/LED with keypad
(STS). The STS automatically and
Wide selection of configurable parameters.
instantaneously switches the AC
International certifications
output, from the DC inverter to an
alternative source such as AC
mains (and back again), providing
extra security of the AC supply to
the load equipment.
The Matrix 2000 solution uses
digital microprocessor control to
provide maximum performance
under all operating conditions.
The built-in controller gives realtime system status through
comprehensive LCD/LED displays,
and allows program setting
through a keypad panel.
eaton.com/telecompower
31
Inverter Power Solutions
Technical Specifications
DC Input
Operating Range
48V: 40Vdc ~ 60Vdc
AC Input (to Transfer Switch)
Voltage Range:
INV-4820SA: 89Vac to 138Vac
(50/60Hz)
INV-4820ESA: 176Vac to 276Vac
Transfer Time
<10ms
AC Output
Power Output
Wave Form
Power Factor
Nominal Output
Voltage
(selectable)
Output
Frequency
Efficiency
Over Load
Protection
Environmental
Requirements
Operating
Temperature
Range
Cooling
Certifications
All products comply with international standards.
Safety
EN60950-1 / UL60950-1
Europe
CE
In the interests of continual product improvement all specifications are subject to
change without notice.
2000VA / 2000W
Pure sine wave
1.0
INV-4820SA: 110/115/120Vac
INV-4820ESA: 208/220/230/240Vac
50,60Hz
>91% at rated load
2*Inom, 5sec max
1.5*Inom, 10sec max
1.25*Inom, temperature controlled
-20°C to 60°C (-4°F to 140°F)
-20°C to 50 °C (-4°F to 122°F), full performance
Fan Cooled
32EATON DC Power Solutions Catalogue
Eaton, Matrix, CellSure, SiteSure, DCTools
and PowerManager are trade names,
trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates.
All other trademarks are property of their
Inverter
PowerDC
Solutions
Eaton
Power Solutions
Telecom
TelecomInverter
InverterSolution
Solution
The Eaton Telecom Inverter is
an innovative dual input inverter
solution designed for
applications where very high
reliability of your AC supply is
required. By incorporating a
230Vac input, as well as the
48Vdc input, Eaton has
developed a solution that closes
the gap between the traditional
UPS and conventional inverter
solutions.
The innovative architecture
allows users to provide clean,
regulated and continuous AC
power to critical loads with the
same n+x reliability as
traditional DC power systems.
The design of the inverter
ensures a seamless transfer
between the AC and DC inputs,
giving zero transfer time and
eliminating the need for a Static
Transfer Switch.
Users can select between
“Line Mode” and “Battery
Mode”. In Line Mode, the
inverter operates similar to a
double conversion UPS,
drawing power from the AC
mains, and delivering
smoothed and isolated AC
power to the load. In “Battery
Mode”, the inverter draws
power from the DC input. When
power to the preferred input is
interrupted; the Inverters
seamlessly switch to the
alternative input with no
interruption of power to your
critical AC loads.
The Eaton Telecom Inverter
solutions can be configured
with an optional controller
module and/or Maintenance
Bypass Switch. The monitoring
controller gives real-time
system status through
comprehensive LCD /LED
displays, and allows system
parameter setting through the
keypad panel. The
communication interface allows
users to monitor and control the
system remotely.
An optional Maintenance
Bypass Switch lets users
manually switch the loads
between inverter power and AC
mains, allowing for complete
shutdown of the inverter
system while still maintaining
mains power to the loads.
Features
•
Pure sine wave output
•
AC and DC inputs
•
High efficiency, >94% in line mode
•
Up to 28kVA single phase output
•
120% overload capacity @ 30ºC
•
Modular n+x design
•
No single point of failure
•
Zero transfer time
•
Hot-plug connection of modules
•
Optional Maintenance Bypass Switch
•
Optional LCD display + keypad with USB/RS232/RS485
interface
•
ROHS compliance
eaton.com/telecompower
33
Inverter Power Solutions
Technical
Specifications
Brief
Technical
Specification
DC Input
Operating
Range
48V: 40Vdc ~ 60Vdc
Certifications
All products comply with international standards.
Safety
Europe
AC Input
Voltage Range:
(50/60Hz)
Transfer Time
AC Output
Power Output
(inverter
module)
Maximum
System Power
Output
(8 Inverters)
Wave Form
Power Factor
Nominal Output
Voltage
(selectable)
Output
Frequency
Efficiency
Over Load
Protection
Environmental
Requirements
Operating
Temperature
Range
Cooling
185Vac - 265Vac
EN60950-1 / UL60950-1
CE
In the interests of continual product improvement all specifications are
subject to change without notice.
zero
3500VA / 2800W
28kVA / 22.4kW
Part Numbers
INV-4835E
INV-SS-8
INV-MC-2000
Pure sine wave
0.8
208/220/230/240Vac
INV-MCSS-1U
INV-MBS-125
Eaton, Dual Input Inverter module. 48Vdc
input, 230Vac Input, 230Vac output. 3.5kVA
Inverter Shelf for 8 x INV-4835E. 8U x 19”
Controller for Dual Input Inverter systems
(requires controller shelf)
Controller Shelf for Dual Input Inverter
systems. 1U x 19”
125A Maintenance Bypass Switch for Dual
Input Inverter systems. 3U x 19”
50/60Hz
>94% AC Input
>91% DC Input
1.5*Inom, 10sec max
1.2*Inom, temperature controlled
-20°C to 60°C (-4°F to 140°F)
-20°C to 50 °C (-4°F to 122°F), full performance
Fan Cooled
34EATON DC Power Solutions Catalogue
Eaton, Matrix, CellSure, SiteSure,
DCTools and PowerManager are trade
names, trademarks, and/or service marks
of Eaton Corporation or its subsidiaries
and affiliates. All other trademarks are
property of their respective owners.
Software
and Communications
Eaton
DC Power Solutions
PowerManagerII™
and
PowerManagerII™Control
Control
and
Monitoring
MonitoringSoftware
Software
The Eaton® PowerManagerII
software provides effective
remote management for Eaton
DC power systems. The
intuitive, Windows® - based
graphical user interface enables
you to quickly ‘zoom in’ and
view concise summary
information, or specific control
functions, key operational data,
or alarm details.
Features
 Windows® based graphical
user interface
 Real-time monitoring
 Automatic alarm indication
 Alarm and activity logging
 On-line access to system
control functions
 Reduces the need for site
visits
 International language
options
 User configurable
navigation maps
 Remote battery testing
PowerManagerII is costeffective. Remote management
can reduce operating and
maintenance costs. The latest
power system information is
available where and when you
want it, greatly reducing the
need for site visits. Alarms are
highlighted and detailed, to help
you analyse faults and produce
maintenance histories and
schedules.
PowerManagerII is
comprehensive. You can
connect as many power
systems as you like, and all
necessary data is clearly
presented. PowerManagerII is
flexible. You can set up area
map views of urban areas and
wider regions, to help you
visually navigate to any site the choices are yours. And it’s
simple to add new maps and
site locations.
Remote Control and
Monitoring
PowerManagerII can control
and monitor power equipment
at multiple sites from one
central location. It provides realtime graphical displays of
system operating conditions,
and monitors all system
functions including individual
rectifier modules.
Event Logs and Data Logs
PowerManagerII lists data from
each site. This includes all
alarms, with activation details.
Historical data can be recorded
for fault analysis and preparation
of maintenance schedules. The
information can be filtered,
sorted or exported to other
applications.
Customisation
PowerManagerII is designed for
easy customisation. Maps and
locations of the sites can be
added to the PowerManagerII
interface.
In addition to Eaton DC Power
Systems, air-conditioning
equipment and intruder alarms
and other plant connected to
the system Supervisory Module
I/O connections, can also be
monitored.
With the SiteManager option,
PowerManagerII can monitor a
wide range of inputs using
SiteSure modules.
eaton.com/telecompower
35
Software and Communications
Technical Specifications
Control
Functions
PowerManagerII includes graphical displays of all system control
processes. All parameters are displayed together with real-time
displays of the system operating conditions:
System
Displays operating conditions and system status.
schematic
Individual rectifier
PowerManagerII monitors individual rectifier
performance.
System summary
Graphical real-time display of system status.
System control
Display of output voltage control systems.
functions
Temperature
Set temperature compensation parameters for
Compensation
optimum battery charging.
Manual Equalize
Initiate battery equalize charge.
Periodic Equalize
Set the duration and level of auto battery equalize
charges.
Fast Charge
Set-up fast battery recharge parameters for
optimum system recovery after AC outage.
Low Voltage
Set the operational parameters of the low voltage
Disconnect
disconnect module.
Battery Current
Set the maximum battery recharge current.
Limit
Battery Test
Conduct on-line battery tests to determine battery
condition.
Discharge Test
Calibrates the Battery Capacity remaining
algorithm.
36EATON DC Power Solutions Catalogue
Data Networks
The Eaton Customer Services Team offers a complete installation and
software customization service, and can provide advice on integration
of PowerManagerII into existing data networks.
Computer
Minimum
Requirements
Operating
System
Ram
Protocols
Interfaces
User
Configurable
Graphics
Format
Windows XP, Windows 7 or Windows Server 2008
2GB
SNMP (Can emit traps)
S3P three layer protocol
RS232, RS485, Ethernet, TCP/IP, modem
Windows bitmap format (.BMP), or Windows
Metafile (.WMF) file formats supported
In the interests of continual product improvement all specifications are
subject to change without notice.
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Software
and Communications
Eaton DC Power Solutions DCTools™
Software
DCTools™Configuration
Configuration
Software
Eaton® DCTools is configuration software for field technicians installing and maintaining Eaton DC power systems. It is supplied at no charge by download from the Internet and simplifies the setup and operation of all Eaton DC power systems. Frontline staff will find DCTools is a major benefit during the installation, troubleshooting and support of any Eaton DC power system, CellSure battery monitoring systems and SiteSure ancillary monitoring and control systems. For added flexibility DCTools can connect to an Eaton DC power system in several ways:; directly through a USB connection to an SC200 Controller, Ethernet LAN/WAN, RS232 serial connection; or through a dialup or cellular modem. DCTools is the ideal setup and diagnostic tool for field technicians. It provides a very easy way for them to configure an Eaton DC product, and view status and alarm conditions. Among the advantages of using DCTools are reduced installation times, lower fault response times, less need to visit sites and better access to operating data for fault analysis and operating conditions such as load growth. These make the processes of power system installation and operation more efficient with the potential for real operating cost savings. DCTools is available for download at http://dcpower.eaton.com/dc‐
products.asp Features

DC power system configuration software 
Windows® compatible 
Easy to use graphical display 
Operates with all Eaton DC power systems, CellSure™ and SiteSure™ 
Local (USB, RS232 serial) or remote (or Ethernet or dialup modem) connection 
Downloadable from the Internet at no charge eaton.com/telecompower
37
Software and Communications
Technical Specifications
Computer Minimum Requirements Operating System RAM Internet connection Windows XP, Window 7 1GB Required for download only Interfaces Communications interfaces supported Ethernet, USB, RS232, or modem Availability Free download http://dcpower.eaton.com/dc‐products.asp In the interests of continual product improvement all specifications are subject to change without notice. 38EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and PowerManager are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their Rectifier
Modules
Eaton
DC Power Solutions
APR24-3G
Power
Rectifier
APR24-3GAccess
Rectifier
Module
The Eaton® APR24-3G Access
Power Rectifier is the 24V
series of rectifier modules
designed specifically for
telecom access networks and
light industrial applications such
as cellular base stations, radio
trunk networks and SCADA
systems. The APR24-3G is also
suitable for NiCad battery
applications.
The new generation 3G
architecture is reliable, power
dense and compact. The high
power density allows as little as
1U of rack space to be
occupied by power, therefore,
maximizing space available for
telecom equipment.
The APR24-3G rectifier
incorporates a combination of
leading-edge high frequency
switch mode technology for a
flexible and efficient DC power
source, with high reliability fan
cooling which further
contributes to its high overall
reliability.
Designed for operation at up to
70°C (158°F) and under a wide
range of AC power conditions,
the APR24-3G is perfectly
suited to the demanding
environments found in network
access applications.
With up to 90% efficiency,
optimum performance at typical
load currents, and power factor
correction the APR24-3G has
some of the lowest running
costs for any 24V DC power
system of its type available.
The APR24-3G is designed to
operate with the Eaton SC100
and SC200 system controllers
in any of the versatile Access
Power Solutions and provide
years of cost-effective and
trouble-free service for your
network access equipment.
Features
• Fast on-line expansion of rectifiers (hot-swap)
• Automatic set-up from system controller
• Intelligent microprocessor controlled
• High power density
• High efficiency and unity power factor
• Wide AC supply conditions
• Wide output voltage ranges
• Constant current output
• NiCad battery compatible
• Compliance with international standards
eaton.com/telecompower
39
Rectifier Modules
Technical Specifications
Input
AC Supply
Power Factor
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
220/240V, 50/60Hz (nominal)
175-275V full output power up to 50°C [122°F]
>0.98 (50 – 100% Output Current)
89% (50 – 100% Output Current)
24V: 20 – 32V
Constant power 1440W, 28.8 - 32V
Constant current 50A, 20 - 28.8V
Environmental
Operating
Temperature
Range
Cooling
-40°C – +70°C [-40°F – +158°F]
Output current is derated above 50°C [122°F] and
below -10°C [14°F]
Temperature controlled, high reliability fans
Mechanical
Dimensions
H,W,D
Weight
3U: 133mm [5.25”], 42mm [1.65”],
266mm [10.45”] overall
1.7kg [3.7 lb]
Certifications
North America
Europe
Australia /
New Zealand
UL, FCC Verification, CSA, IC
CE
C-tick, Telepermit
In the interests of continual product improvement all specifications are
subject to change without notice. Performance ratings are valid with all
other variables at Nominal. Specifications guaranteed over rated operating
range.
40EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Rectifier
Modules
Eaton
DC Power Solutions
APR48-3G
Power
Rectifier
APR48-3GAccess
Rectifier
Module
The Eaton® APR48-3G Access
Power Rectifiers are designed
specifically for network access
applications such as cellular
base stations, customer
premises equipment and roadside cabinet installations.
The new generation 3G
architecture is reliable, power
dense and compact. The high
power density allows as little as
1U of rack space to be
occupied by power, therefore,
maximizing space available for
telco equipment.
The APR48-3G rectifier incorporates a combination of leading-edge high frequency switch
mode technology for a flexible
and efficient DC power source,
with high reliability fan cooling
which further contributes to its
high overall reliability.
These features make the
APR48-3G perfectly suited to
the wide variety of equipment
and demanding environmental
conditions found in network
access applications.
The APR48-3G also has power
factor correction and is up to
92% efficient, with optimum
performance available at typical
load currents. Together these
give the APR48-3G some of the
lowest running costs for any
DC powersystem of its type
available.
Operating with the Eaton
SC100 or SC200 system controller, the APR48-3G rectifier
modules will provide years of
cost-effective, and trouble free
service for your 48V network
access equipment.
The APR48-3G is a high powered rectifier with 1800W
output. It is designed for operation at up to 70°C (158°F)
and under a wide range of AC
power conditions.
Features
• Fast on-line expansion of rectifiers (hot-swap)
• Automatic set-up from system controller
• Intelligent microprocessor controlled
• Industry leading power density
• High efficiency and unity power factor
• Wide AC supply conditions
• Wide output voltage ranges
• Constant power output
• Compliance with international standards
eaton.com/telecompower
41
Rectifier Modules
Technical Specifications
Input
AC Supply
Power Factor
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
220/240V, 50/60Hz (nominal)
175-275V full output power up to 50°C [122°F]
>0.99 (50 – 100% Output Current)
92% (50 – 100% Output Current)
48V: 43 – 57.5V
1800W @ 48V
Environmental
Operating
Temperature
Range
Cooling
-40°C – +70°C [-40°F – +158°F]
Output current is derated above 50°C [122°F] and
below -10°C [14°F]
Temperature controlled, high reliability fans
Mechanical
Dimensions
H,W,D
Weight
3U: 133mm [5.25”], 42mm [1.65”],
266mm [10.45”] overall
1.7kg [3.7 lb]
Certifications
North America
Europe
Australia /
New Zealand
UL, FCC Verification, CSA, IC
CE
C-tick, Telepermit
In the interests of continual product improvement all specifications are
subject to change without notice. Performance ratings are valid with all
other variables at Nominal. Specifications guaranteed over rated operating
range.
42EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
munications network
ators who are striving to
nergy costs across the
ork, and/or to meet
essive carbon footprint
ction targets.
options makes the Energy
Saver Rectifier well suited to
limited space applications such
as ETSI and road side cabinets.
The Energy Saver Rectifier is
fully compatible with existing
ating with well Rectifier
over 96% Modules
Eaton 3G systems and it is one
Power
Solutions
ency, it produces at leastEaton
of theDC
easiest
rectifiers
to use,
less waste energy than
with a simple plug-and-go
other modern rectifiers,
insertion. It operates under a
with potentially greater
wide range of AC power
gs over older
conditions and in temperatures
tructure.
at up to 70°C (158°F).
APR48-ES
Power
Energy
APR48-ESAccess
Energy
Saver
Rectifier
Saver Rectifier
2kW Energy Saver Rectifier
ideal module size for
ering access applications
n a telecom network such
llular base stations, ADSL
ment, and fibre nodes.
ectifier features intelligent
l signal processing for
nced control, producing
efficiency in excess of
for typical operating loads,
also maintaining a very
minimum operating
ency of 95 to 96%, over a
wide range of loads (from
to 100% of the 2kW
city).
ures
000W output power
nergy saving efficiency greater than 96%
Wide efficiency curve
ndustry leading power density
ast on-line expansion of rectifiers (hot-swap)
imple ‘plug and go’ insert
nity power factor
igital signal processing for enhanced control
Wide AC supply conditions
Wide output voltage range
onstant power output
The Eaton® APR48-ES Energy
Saver Rectifier is designed for
communications network
operators who are striving to
cut energy costs across the
network, and/or to meet
aggressive carbon footprint
reduction targets.
Operating with well over 96%
efficiency, it produces at least
50% less waste energy than
most other modern rectifiers,
and with potentially greater
savings over older
infrastructure.
The high power density, short
depth and flexible mounting
options makes the Energy
Saver Rectifier well suited to
limited space applications such
as ETSI and road side cabinets.
The Energy Saver Rectifier is
fully compatible with existing
Eaton 3G systems and it is one
of the easiest rectifiers to use,
with a simple plug-and-go
insertion. It operates under a
wide range of AC power
conditions and in temperatures
at up to 70°C (158°F).
The 2kW Energy Saver Rectifier
is the ideal module size for
powering access applications
within a telecom network such
as cellular base stations, ADSL
equipment, and fibre nodes.
This rectifier features intelligent
digital signal processing for
enhanced control, producing
peak efficiency in excess of
96% for typical operating loads,
while also maintaining a very
high minimum operating
efficiency of 95 to 96%, over a
very wide range of loads (from
30% to 100% of the 2kW
capacity).
ompliance with international standards
Features
• 2000W output power
• Energy saving efficiency greater than 96%
• Wide efficiency curve
• Industry leading power density
• Fast on-line expansion of rectifiers (hot-swap)
• Simple ‘plug and go’ insert
• Unity power factor
• Digital signal processing for enhanced control
• Wide AC supply conditions
• Wide output voltage range
• Constant power output
• Compliance with international standards
eaton.com/telecompower
43
Rectifier Modules
Technical Specifications
Input
AC Supply
Power Factor
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
Environmental
Operating
Temperature
Range
Cooling
120V/208-240V, 50/60Hz (nominal)
185-275V full output power up to 50°C [122°F]
90-185V reduced output power
>0.99 (50 – 100% output current)
>96% peak
>95% (20 – 100% output power)
43 – 57.5V
2000W @ 48V
-40°C – +70°C [-40°F – +158°F]
Output power derates above 50°C [122°F]
Temperature controlled, variable speed, high
reliability fan <50dBA ambient temperature 25°C
Mechanical
Dimensions
H,W,D
Weight
3U: 133mm [5.25”], 42mm [1.65”],
266mm [10.45”] overall
1.7kg [3.7 lb]
Certifications
North America
Europe
UL, FCC Verification, CSA, IC
CE
In the interests of continual product improvement all specifications are
subject to change without notice. Performance ratings are valid with all
other variables at Nominal.
44EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
munications network
ators who are striving to
nergy costs across the
ork, and/or to meet
essive carbon footprint
ction targets.
options makes the Energy
Saver Rectifier well suited to
limited space applications such
as ETSI and road side cabinets.
The Energy Saver Rectifier is
fully compatible with existing
ating with well Rectifier
over 96% Modules
Eaton 3G systems and it is one
DC
Power
Solutions
ency, it produces at leastEaton
of the
easiest
rectifiers
to use,
less waste energy than
with a simple plug-and-go
other modern rectifiers,
insertion. It operates under a
with potentially greater
wide range of AC power
gs over older
conditions and in temperatures
tructure.
at up to 70°C (158°F).
NPR48-ES
Rectifier
NPR48-ESEnergy
EnergySaver
Saver
Rectifier
2kW Energy Saver Rectifier
ideal module size for
ering access applications
n a telecom network such
llular base stations, ADSL
ment, and fibre nodes.
ectifier features intelligent
l signal processing for
nced control, producing
efficiency in excess of
for typical operating loads,
also maintaining a very
minimum operating
ency of 95 to 96%, over a
wide range of loads (from
to 100% of the 2kW
city).
ures
000W output power
nergy saving efficiency greater than 96%
Wide efficiency curve
ndustry leading power density
ast on-line expansion of rectifiers (hot-swap)
imple ‘plug and go’ insert
nity power factor
igital signal processing for enhanced control
Wide AC supply conditions
The Eaton® NPR48-ES Energy
Saver Rectifier is designed for
communications network
operators who are striving to
cut energy costs across the
network, and/or to meet
aggressive carbon footprint
reduction targets.
Operating with well over 96%
efficiency, it produces at least
50% less waste energy than
most other modern rectifiers,
and with potentially greater
savings over older
infrastructure.
The NPR48-ES Energy Saver
Rectifier harnesses the
technology of the APR48-ES
2kW rectifier to offer a
powerful 3kW of output power.
The high power density, short
depth and flexible mounting
options makes the Energy
Saver Rectifier well suited to
limited space applications such
as ETSI and road side cabinets.
The Energy Saver Rectifier is
fully compatible with the
existing Eaton SC200 system
controller and it is one of the
easiest rectifiers to use, with a
simple plug-and-go insertion. It
operates under a wide range of
AC power conditions and in
temperatures at up to 70°C
(158°F).
This rectifier features intelligent
digital signal processing for
enhanced control, producing
peak efficiency in excess of
96% for typical operating loads,
while also maintaining a very
high minimum operating
efficiency of 95 to 96%, over a
very wide range of loads.
Wide output voltage range
onstant power output
ompliance with international standards
Features
 3000W output power
 Energy saving efficiency greater than 96%
 Wide efficiency curve
 Industry leading power density
 Fast on-line expansion of rectifiers (hot-swap)
 Simple ‘plug and go’ insert
 Unity power factor
 Digital signal processing for enhanced control
 Wide AC supply conditions
 Wide output voltage range
 Constant power output
 Compliance with international standards
eaton.com/telecompower
45
Rectifier Modules
Technical Specifications
Input
AC Supply
Power Factor
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
Environmental
Operating
Temperature
Range
Cooling
120V/208-240V, 50/60Hz (nominal)
185-275V full output power up to 50°C [122°F]
90-185V reduced output power
>0.99 (50 – 100% output current)
>96% peak
>95% (20 – 100% output power)
43.2 – 57.5V
3000W, 60Amp at 50V
-40°C – +70°C [-40°F – +158°F]
Output power derates above 50°C [122°F]
Temperature controlled, variable speed, high
reliability fan <50dBA ambient temperature 25°C
Mechanical
Dimensions
H,W,D
Weight
3U: 130mm [5.1”], 63mm [2.5”],
266mm [10.5”] overall
2.3kg [5.1 lb]
Certifications
Europe
CE
In the interests of continual product improvement all specifications are
subject to change without notice. Performance ratings are valid with all
other variables at Nominal.
46EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Rectifier
Modules
Eaton
DC Power Solutions
CR48-3G Core
PowerModule
Rectifier
CR48-3G
Rectifier
The Eaton® CR48-3G Core
Network Rectifiers are
designed specifically for core
network applications such
central office and data centres.
The new generation 3G
architecture of the CR48-3G
rectifier has improved space
utilisation so rack space can be
maximised for use with telco
equipment and not power
equipment.
The combination of industry
leading power density and high
frequency switch mode
technology with high reliability
fan cooling makes the CR48-3G
a flexible, efficient, and very
highly reliable DC power
source.
The CR48-3G is a very high
powered rectifier with 5800W
output, it is designed for
operation at up to 70°C (158°F)
and under a wide range of AC
power conditions.
The CR48-3G also has power
factor correction and is up to
92% efficient, with optimum
performance available at typical
load currents. Together these
give the CR48-3G some of the
lowest running costs for any
DC power system of its type
available.
These features make the CR483G ideally suited to central
office and data center
applications that require the
highest level of performance
and reliability from the DC
power system.
Operating with the Eaton
SC200 system controller, the
CR48-3G rectifier modules will
provide years of cost-effective,
and trouble free service for your
core 48V network equipment.
Features
• Fast on-line expansion of rectifiers (hot-swap)
• Automatic set-up from system controller
• Intelligent microprocessor controlled
• Industry leading power density
• High efficiency and unity power factor
• 3Ø AC supply
• Wide AC supply conditions
• Wide output voltage ranges
• Constant power output
• Compliance with international standards
eaton.com/telecompower
47
Rectifier Modules
Technical Specifications
Input
AC Supply
Power Factor
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
208V, 50/60Hz (nominal) 3-phase ∆
400V, 50/60Hz (nominal) 3-phase Y
323-510V full output power up to 50°C [122°F]
>0.99 (50 – 100% Output Current)
92% (50 – 100% Output Current)
43 – 58V
5800W @ 48V
Environmental
Operating
Temperature
Range
Cooling
-40°C – +70°C [-40°F – +158°F]
Output current is derated above 50°C [122°F] and
below -10°C [14°F]
Temperature controlled, high reliability fan
Mechanical
Dimensions
H,W,D
Weight
3U: 130mm [5.25”], 121mm [4.8”],
321mm [12.6”] overall
4.4kg [9.7 lb]
Certifications
North America
Europe
Australia /
New Zealand
UL, FCC Verification, CSA, IC
CE
C-tick, Telepermit
In the interests of continual product improvement all specifications are
subject to change without notice.
48EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
48-ES Solar
ned for
network
re striving to
across the
to meet
on footprint
s.
The ASC48-ES combines with
the Eaton SC200 controller to
provide a fully managed
solution.
ControlEaton
and Monitoring
DC Power Solutions
h-performance
r Point Tracking
to extract
% of available
solar panels.
efficiency of
nsures that the
r is available to
and run load
ons.
ay be
e or more
l solar panels.
ES chargers,
n solar panels,
d in parallel.
er features
signal
nhanced
ng peak
ess of 96% for
loads, while
a very high
ing efficiency
ver a very wide
rom 30% to
W capacity).
Full monitoring includes energy
metering and logging on input
and output.
ASC48-ES
ASC48-ESSolar
SolarCharger
Charger
The ASC48-ES is fully
compatible with existing Eaton
3G systems, such as the APS3
and APS6 systems. The output
may be paralleled with one or
more APR48-ES rectifiers to
produce a versatile power
solution for both AC or
generator power and solar
power.
This makes it an ideal solution
for a fully integrated solar /
diesel hybrid solution, or an AC
powered system with solar
added to reduce energy
consumption.
Intelligent control in the SC200
allows optimal balance of solar
energy and backup fuel.
The solar charger is protected
against input over-voltage,
surges and over-temperature. It
is rated for operation in
temperatures at up to 70°C
(158°F).
ut power
ts above 99% of available energy
g efficiency greater than 96%
ncy curve
ing power density
expansion of rectifiers (hot-swap)
and go’ insert
The Eaton® ASC48-ES Solar
Charger is designed for
communications network
operators who are striving to
cut energy costs across the
network, and/or to meet
aggressive carbon footprint
reduction targets.
The ASC48-ES combines with
the Eaton SC200 controller to
provide a fully managed
solution.
It includes a high-performance
Maximum Power Point Tracking
(MPPT) function to extract
more than 99.9% of available
power from the solar panels.
The ASC48-ES is fully
compatible with existing Eaton
3G systems, such as the APS3
and APS6 systems. The output
may be paralleled with one or
more APR48-ES rectifiers to
produce a versatile power
solution for both AC or
generator power and solar
power.
Combined with efficiency of
above 96%, it ensures that the
maximum power is available to
charge batteries and run load
under all conditions.
An ASC48-ES may be
connected to one or more
strings of parallel solar panels.
Several ASC48-ES chargers,
each with its own solar panels,
may be operated in parallel.
This solar charger features
intelligent digital signal
processing for enhanced
control, producing peak
efficiency in excess of 96% for
typical operating loads, while
also maintaining a very high
minimum operating efficiency
of 95 to 96%, over a very wide
range of loads (from 30% to
100% of the 2kW capacity).
Full monitoring includes energy
metering and logging on input
and output.
This makes it an ideal solution
for a fully integrated solar /
diesel hybrid solution, or an AC
powered system with solar
added to reduce energy
consumption.
Intelligent control in the SC200
allows optimal balance of solar
energy and backup fuel.
The solar charger is protected
against input over-voltage,
surges and over-temperature. It
is rated for operation in
temperatures at up to 70°C
(158°F).
processing for enhanced control
oltage range
voltage range
ith international standards
Features
• 2000W output power
• MPPT extracts above 99% of available energy
• Energy saving efficiency greater than 96%
• Wide efficiency curve
• Industry leading power density
• Fast on-line expansion of rectifiers (hot-swap)
• Simple ‘plug and go’ insert
• Digital signal processing for enhanced control
• Wide input voltage range
• Wide output voltage range
• Compliant with international standards
eaton.com/telecompower
49
Control and Monitoring
Technical Specifications
Input
Input voltage
range
Maximum
power point
tracking
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
Parallel
operation
Output
Input
Environmental
Operating
Temperature
Range
Cooling
Mechanical
Dimensions
H,W,D
Weight
Certifications
Europe
Australia /
New Zealand
100 V DC to 300V DC nominal
Maximum open circuit voltage 380 V DC
Absolute maximum input voltage 400V DC
Uses more than 99.9% of available power
>96% peak
>95% (30 – 100% output power)
43 – 57.5V
2000W @ 48V / 185V to 300V input
1150W at 120V input
Up to 4 chargers may be connected in parallel to
the DC bus
Not supported (each ASC48-ES must be connected
to separate string(s) of solar panels)
-40°C – +70°C [-40°F – +158°F]
Output power derates above 50°C [122°F]
Temperature controlled, variable speed, high
reliability fan
3U: 133mm [5.25”], 42mm [1.65”],
266mm [10.45”] overall
1.7kg [3.7 lb]
CE
RCM
In the interests of continual product improvement all specifications are
subject to change without notice. Performance ratings are valid with all
other variables at Nominal.
50EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
ControlEaton
and Monitoring
DC Power Solutions
SC200 System Controller
The Eaton® SC200 System
Controller is an advanced
control and monitoring solution
for Eaton Enterprise, Access,
Metro and Core Power
Solutions.
application, ensuring fast and
problem free installation. Onsite changes are easily made
from the front panel or with a
Windows PC using DCTools
configuration software.
It provides a full suite of
advanced communications
options, including built-in
Ethernet interface, Web server,
and SNMP agent.
The high-resolution color LCD
display is easy to read and has
an easy to use menu structure.
All system values and alarms
can be displayed, with easy
keypad access to check or edit
settings.
Alarm notifications may be by
SNMP traps, email, SMS, dialout to PowerManagerII remote
monitoring software, or relay
contact closures.
An intelligent “Smart Alarms”
feature provides highly
configurable control and alarms
to automated site management
and improve performance – e.g.
disconnect loads during peak
AC grid loading, run outdoor
cabinets in low noise mode at
night, manage cooling, or
customise site alarms to
network requirements.
The SC200 provides full
generator control and fuel
metering capability for off-grid,
hybrid generator, battery, solar
and wind applications.
The SC200 is supplied
preconfigured with a default
configuration file, or factory
customized for a particular
The SC200 works with separate
system I/O boards for powerful
and user-friendly interfacing.
Easy, low cost I/O expansion is
possible by adding additional
I/O boards.
 24V & 48V power systems
 Wireless cell sites &
switches
 Transmission terminals
 Local & central office
switching
 External GSM or PSTN
modem
 Additional I/O boards for
system expansion
 SiteSure-3G modules for
site management
 Ethernet interface built-in
 SNMP agent V1, V2c, V3
 Battery mid-point monitoring & discharge time remaining
 Generator control & fuel metering
 Alternative energy input metering
 SMS & email alarm messages (with GSM modem)
 Comprehensive system control functions
 Complies with international standards
 Setup via web, keypad or DCTools configuration software
 Language options
 Optional extra I/O boards or SiteSure-3G modules for
expansion
 Smart alarms
 Modbus
eaton.com/telecompower
51
Control and Monitoring
Technical Specifications
Operation
Supply Voltage
Range
Operating Range
Input/Output
Standard
Analog inputs
Digital inputs
LVD contactor
outputs
Relay outputs
Communications
Interfaces
Physical
Software
Management
software
User Interface
Display
Keypad
Language
Options
Indicators
Mechanical
Dimensions
H,W,D
Mounting
Datalogging
Event Log
Data Log
18 to 60Vdc
Standard: -10 to +50°C [14 to 122 °F]
Extended: -25 to 70°C [-13 to 158 °F]
Current sensor (3), Bus voltage (1), Temperature
(2)
4 Internal (pre-defined), 6 external (user-defined)
2 with one IOBGP module
Up to 16 with additional IOBGP modules
6 Voltage free, NO-C-NC, 0.1A @ 60VDC
Screwless terminal block, 0.5mm2 - 2.0mm2
conductors
Options
Input/Output
Modem
communications
Certifications
China
North America
Europe
Australia /
New Zealand
With IOBSS module (SiteSure-3G):
Analog inputs: 48
Digital inputs: 108
Digital outputs: 32
PSTN or GSM. Requires external modem.
MII
UL, FCC Verification, IC
CE
C-tick
In the interests of continual product improvement all specifications are
subject to change without notice.
Ethernet, USB and RS232
IP, http, https (secure web), S3P, Modbus, SMTP
(email)
DCTools configuration / local management
software.
PowerManagerII remote management software.
SNMP version V1, V2c or V3. Supports standard
Network Management System software including
HP OpenView Network Node Manager.
Back-lit color dot matrix LCD 160 x 128 pixel
Adjustable viewing angle
6 keys
English: Standard
Spanish, German and Chinese available on
request.
Other language software upgrades by
arrangement.
Power on, Critical/Major alarm, Minor alarm
SC200: 133.5mm (3U), 44.5mm, 70mm
IOBGP: 106mm, 175mm, 18mm
SC200: rectifier slot or flush panel mount
Orientation: vertical or horizontal
IOBGP: panel mount
10,000 records
10,000 records
52EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
ControlEaton
and Monitoring
DC Power Solutions
CellSure™
and
CellSure™Battery
BatteryMonitoring
Monitoring
and
Fault
FaultDiagnosis
Diagnosis
Features
• Early warning of potential failures
• Reserve Time remaining on Discharge
• Accurate battery capacity and state-of-health measurements
• Patented software algorithm
• Cost effective for network wide deployment
• Remote communications options
• Graphical data displays
• Data export capability
• Real-time monitoring and alarms
• Modular and expandable
• Easy to install and operate
• Remote Battery Testing (with PowerManagerII™ software)
When there’s a power failure
there is only one thing between
your network never missing a
beat and an outage – the
battery. Batteries tend to be the
forgotten safety net. Rarely
needed, they sit quietly waiting
to do their job.
However, when they are called
to action will they be ready?
Now there’s the Eaton®
CellSure battery monitoring and
fault diagnosis system.
CellSure provides a method to
report on batteries, showing
where problems may occur and
giving the most important
information - reliable battery
capacity measurements in real
time.
A battery monitoring system is
the best way to keep track of a
battery’s condition and to
highlight ahead of time if any
maintenance is needed.
But until now the hardware
requirements, and the need for
regular site visits to setup and
run a monitoring system, have
made this an expensive option.
eaton.com/telecompower
53
Control and Monitoring
Technical Specifications
System
configurations
Nominal system
voltages
Battery strings
per system
Cell/monobloc
voltage
Battery types
Alarms and
Indicators
Controller
module
indicators
Controller
module alarms
Inputs
Cell/monobloc
voltage
String current
Ambient
temperature
String
temperature
Data Output
Alarm
conditions
Measured
values
Data
24V or 48V
1-4 strings
2V, 6V or 12V
VRLA (standard) or flooded cells (on request)
Status LED, 4 String Alarm LEDs
Voltage free relay contacts (Urgent and Non-urgent)
±0.5% accuracy
±1% accuracy
±1°C accuracy
±1°C accuracy
Cell/monobloc voltage low, Cell/monobloc
divergence, Discharge voltage low, String
temperature, String overcharge, Low capacity, Low
charge.
Actual capacity, Reserve charge, Reserve time,
“State of Health”
Weekly log: 7day x 24hour cell/monobloc data
Yearly log: 365day cell/monobloc data (averaged)
Last two partial discharges.
Last full discharge.
Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
North America
UL, FCC Verification
Canada
IC
Europe
CE
Australia /
C-tick
New Zealand
In the interests of continual product improvement all specifications are
subject to change without notice.
54EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
Control and
Monitoring
Eaton
DC Power Solutions
SiteSure-3G™
SiteSure-3G™
The Eaton® SiteSure-3G adds
on to the SC200 Controller to
provide control and monitoring
of a wide range of external
devices. It uses the communications capability of an Eaton
DC power system to monitor
and control security, air
conditioning, engine alternators
and other building services, or
sense DC currents for load
metering.
SiteSure-3G modules can be
remotely controlled and
configured using the
PowerManagerII remote control
and monitoring software or
with DCTools local craft
terminal.
SiteSure-3G is also compatible
with Network Management
Systems using SNMP.
Additional SiteSure-3G modules
can be added as required to
provide the number of inputs
and outputs needed for a
particular application.
Features
• Remote control and monitoring
• Expandable
• Modular
• Real time data collection
• Compliance with international standards
eaton.com/telecompower
55
Control and Monitoring
Technical Specifications
Operation
Supply Voltage
Range
Rated Operating
Range
Input/Output
Bus voltage
input
Current inputs
Temperature
inputs
Digital inputs
General
purpose analog
inputs
Digital Outputs
(Relays)
19 to 60V
-10°C to +80°C [+14°F to +176°F]
Number:
1
Range:
-60V to +60V
Number:
3
Range:
-50mV to +50mV
Number:
2
Range:
2.53V to 3.23V
(-20°C to +70°C with TS02 temperature sensor)
Number:
10
Number:
4
Range:
0V to +10V
Number:
Type:
6
Voltage free, NO-C-NC
0.3A @ 60VDC / 1A @ 30VDC
Certifications
All products comply with international standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
North America
Europe
Australia /
New Zealand
UL, FCC Verification, IC
CE
C-tick
In the interests of continual product improvement all specifications are
subject to change without notice.
56EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Outdoor
Enclosures
Eaton
DC Power Solutions
Whisper
WhisperCabinet™
Cabinet™Roadside
Roadside
Telecom
Enclosures
TelecomEquipment
Equipment
Enclosures
Single Bay and Double Bay
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
The Eaton Whisper series of
outdoor telecommunications
Whisper quiet operation – to minimize neighborhood noise
cabinets is a versatile and
pollution
compact range of solutions for
DC power, battery backup,
Air to air heat-exchangers – giving 1300W heat dissipation with
equipment mounting, and
only 10°C internal temperature rise
copper termination.
Variable speed DC fans – lowest noise, highest efficiency, and
Double-skinned marine grade
operation under mains fail
aluminium construction
Removable fan plates – to simplify servicing
provides the highest level of
19”, 21” or 23” standard equipment bay mounting - for flexibility equipment protection along
with long life and zero
Single or double equipment bays – more room for revenue
maintenance for the cabinet.
generating equipment
Batteries are mounted in a
Double skin design, cabinet within a cabinet – to fully protect your separate compartment for ease
electronics
of access.
The Single Bay Whisper has
Graffiti resistant paint – aids cleaning and against vandal impact
mounting space for up to 27U
Three point locks – secure locks to resist tampering
of 19 inch equipment, while the
Marine grade aluminum – ensures long life and corrosion
Double Bay Whisper adds
resistance
another 27U of mounting
space.
Galvanized steel plinth – for secure and simplified installation
MDF options are available for
Separate MDF chamber – enables contractor maintenance access
copper termination.
Large battery compartment – for high power loads and longer
battery reserve times
The cabinets are cooled by a
powerful air to air heat
exchanger system with the
ability to dissipate up to 1300W
of heat. This uses temperaturecontrolled DC fans for lowest
energy use and lowest possible
noise. The cabinet is fully NEScompliant.
All cabinets are fully monitored
with remote communications
and control options.
• High seismic withstand capability – for reliability in adversity
eaton.com/telecompower
57
Outdoor Enclosures
Technical Specifications
Dimensions
(H, W, D)
Overall
Equipment bay(s)
MDF bay
Battery bay
Cable access
Cable Entry
Environmental
Thermal
Performance
External Ambient
Temperature
IP Rating
Seismic Rating
Construction
Cabinet
Base
Color/Finish
Single bay: 1500mm x 1650mm x 600mm
Double bay: 1500mm x 2240mm x 600mm
1330mm x 660mm x 500mm
Single bay: 1 x 27RU 19”/23”, 1 x 48SU, 21”
(ETSI)
Double bay: 2 x 27RU 19”/23”, 2 x 48SU, 21”
(ETSI)
1330mm, 630mm, 300mm
1 x 48SU (ETSI 21”)
Space 2000 pairs R&M disconnect
1330mm, 300mm, 630mm
Suits 2 x 48V x 150Ah FT type
3 x removable panels
1300W per 10°C above ambient (in equipment
chamber)
-40°C to +45°C
IP56 (equipment bay)
IP54 (MDF and battery bay)
2g in any direction
Single bay: 2.0mm marine grade aluminum
Double bay: 2.5mm marine grade aluminum
Single bay: 3mm MS hot dipped galvanized
Double bay: 5mm MS hot dipped galvanized
Anti-graffiti green or beige, powder-coat
In the interests of continual product improvement all specifications are
subject to change without notice.
58EATON DC Power Solutions Catalogue
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Outdoor
Enclosures
Eaton
DC Power Solutions
Echo
EchoOutdoor
OutdoorEquipment
Equipment
Enclosures
Enclosures
Features
•
Options:
o
Echo-B – power, battery and equipment
o
Echo-T – power, battery and equipment
o
Echo-30 – equipment
• Air to air heat exchangers
• High power rating
• Flexible equipment mounting
• Fully sealed interior for long life and equipment protection
• Multiple enclosure options
• Full monitoring and remote control options
• Graffiti resistant paint
• Three point locks – secure locks to resist tampering
• Marine grade aluminum – ensures long life and corrosion
resistance
•
High seismic withstand capability – for reliability in adversity
The Eaton Echo series of
outdoor telecommunications
cabinets is a versatile range of
solutions for DC power, battery
backup and equipment
mounting.
The Echo-B houses DC power,
batteries and equipment.
It has mounting space for up to
11U of 19 inch equipment. The
included DC power system
provides up to 187A of load
current plus battery recharge.
13U of 19 inch rack space is
available for equipment
mounting.
A flexible mounting system
allows for a wide range of
equipment mounting options.
The Echo-30 is a companion to
the Echo-B and adds up to 30U
of equipment mounting space.
The Echo-T is a stand-alone
variant of the Echo-B with
increased equipment mounting
space and a generator
connection.
The cabinets are cooled by a
high-performance air to air heat
exchanger system. This uses
temperature-controlled DC fans
for lowest energy use and
lowest possible noise.
All cabinets are fully monitored
with remote communications
and control options.
To increase equipment
mounting space, add the
Echo-30.
eaton.com/telecompower
59
Outdoor Enclosures
Technical Specifications
Output
DC Output
Voltage Range
21.5V – 32V / 43-57.5V
.
Dimensions
(H, W, D)
All options
Equipment
Mounting
Echo-B
Echo-30
Echo-T
DC power
Echo-B
Echo-T
H, W, D
1940 x 770x 790 mm
19inch / 21 inch x 11u (498mm)
19inch / 21 inch x 30u (1333mm) plus 4U reduced
depth
19inch / 21 inch x 12u (533mm)
RM6 power shelf
125A essential load, 125A non-essential load
RM3 power shelf
50A load, 30A battery recharge
Battery option
Echo-B, Echo-T
Maximum 2 strings x 190Ah at 48v
Environmental
Heat dissipation
for 10°C rise
Echo-B
Echo-30
Echo-T
Ambient
Temperature
IP Rating
1500W
3500W
1500W
-20°C to +40°C Operating
-20°C to 60°C Storage
IP55
Seismic Rating
Wind survival
2g in any direction
40m/s
Construction
Cabinet
Plinth
Color/Finish
2mm marine grade aluminum, conversion coated
3mm mild steel, hot zinc sprayed
Ghost Grey or Forest Green
Anti-graffiti powder coat
In the interests of continual product improvement all specifications are
subject to change without notice
60
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Eaton DC Power Solutions
Bullet™ Optical Fibre Equipment
Enclosures
Features
•
•
•
•
Standard and Active Bullet Cabinets
The Eaton Bullet outdoor
telecommunications cabinet
Optical, copper and equipment mounting configurations
exhibits a very low profile and
Management for optical fibre cables, microducts, splitters and comes in just under one meter
high. In an era where street
copper pairs
furniture needs to be as innocuous
Graffiti resistant paint
as possible, the Eaton Bullet
certainly meets this requirement.
Three point locks – secure locks to resist tampering
• Marine grade aluminum – ensures long life and corrosion
resistance
• High seismic withstand capability – for reliability in adversity
• Easy access for microducts/blown fibre applications
Optional Active Cabinet DC Power Extension
• Extension cabinet for AC/DC power system and batteries
• Heat exchanger cooling for the power system and equipment
bay.
• Direct air cooling for the batteries
• Air to air heat-exchangers – giving up to 450Watts heat
dissipation
• Variable speed AC/DC fans – lowest noise, highest efficiency,
and operation under mains fail
• Integrated Eaton AC/DC power system.
• External generator connection
• See technical specs for equipment mounting
The Eaton Active Bullet
cabinet variant includes all the
fibre handling facilities and
equipment mounting of the
standard Bullet, and adds an
advanced DC power system,
including monitoring and
batteries.
The power system and
The base Bullet cabinet provides
equipment space are cooled by
full management capability for
a high-performance air to air
optical fibre cables, including
heat exchanger system. The
facilities for managing micro-ducts exchanger uses temperatureand blown fibre.
controlled DC fans for lowest
The semi-circular end door provides energy use and lowest possible
unrestricted access for managing
noise, making them suitable for
fibre entry.
use in residential areas.
13U of 19 inch rack space is
During prolonged power
available for equipment
outages, simply bring in a
mounting. A flexible mounting
generator and plug the supplied
system allows for a wide range of
power cable into the generator.
equipment mounting options.
The cabinet will automatically
switch over to generator power
and recharge its batteries.
Technical Specifications
Dimensions
(H, W, D)
Cabinet Only
With Power
Extension:
H, W, D
895x1160x400mm
H, W, D
895x1720x400mm
Equipment /MDF
Mountable Area
900mm x 820mmx 320mm (30mm clearance to
door)
Useable space
excluding cable
entry area
13U (578 mm) x 15”/19”/23” wide x 320mm
deep
Power
Batteries
48Vdc standard, 24V optional
1 string x 55Ahr (24V, 2 strings x 55Ahr)
Environmental
Thermal
Performance
Ambient
Temperature
IP Rating
450W + solar gain per 10°C above ambient.
-20°C to +40°C Operating
-20°C to 60°C Storage
IP55 (equipment bay)
Seismic Rating
Wind survival
2g in any direction
40m/s
Construction
Cabinet
Plinth
Color/Finish
2mm marine grade aluminum, conversion coated
Modular concrete
Beige or Forest Green /Anti-graffiti powder coat
.
In the interests of continual product improvement all specifications are
subject to change without notice
EATON DC Power Solutions Catalogue
Outdoor
Enclosures
Eaton
DC Power Solutions
ORC™
ORC™Roadside
RoadsideTelecom
Telecom
Equipment
EquipmentEnclosures
Enclosures
Features
• Air to air heat-exchangers – giving up to 5kW heat dissipation
• Field upgrade or replacement of heat exchangers
• Variable speed DC fans – lowest noise, highest efficiency, and
operation under mains fail
• 19” standard equipment bay mounting.
• Double equipment bays – more room for revenue generating
equipment
• Graffiti resistant paint – aids cleaning and against vandal impact
• Three point locks – secure locks to resist tampering
• Marine grade aluminum – ensures long life and corrosion
resistance
• Galvanized steel plinth – for secure and simplified installation
• Optional front exhaust plinth to meet New Zealand NES noise
requirements
• Optional internal battery compartment for smaller footprint
• Optional integrated battery cabinets for longer back-up time
The Eaton ORC series of
outdoor telecommunications
cabinets is a versatile and
compact range of solutions for
DC power, battery backup and
equipment mounting.
The ORC houses DC power,
batteries and equipment.
Marine grade aluminium
construction and fully sealed
technology guarantee a long
maintenance-free life for the
cabinet and complete
protection for equipment
inside.
There is a wide range of
equipment mounting, cooling
and battery options.
The ORC has mounting space
for up to 19U of 19 inch
equipment.
The included DC power system
provides up to 187A of load
current plus battery recharge.
Optional battery cabinets
provide capacity for up to
600Ah backup.
The cabinets are cooled by a
powerful air to air heat
exchanger system with the
ability to dissipate up to 5kW of
heat. This uses temperaturecontrolled DC fans for lowest
energy use and lowest possible
noise. An NES-compliant option
is available for lowest noise
residential applications.
All cabinets are fully monitored
with remote communications
and control options.
• High seismic withstand capability – for reliability in adversity
eaton.com/telecompower
63
Outdoor Enclosures
Technical Specifications
Specification
Dimensions
(H, W, D)
Rear vented ORC:
Front vented ORC:
Battery Cabinet:
Plinth height
Rear Vented
Front Vented
Equipment bays
without battery box:
with battery box:
Batteries
Internal:
External:
Environmental
Thermal Performance
1300mm, 1200mm, 790mm (excludes plinth)
1300mm, 1200mm, 860mm (excludes plinth)
1300mm, 420mm, 790mm (excludes plinth)
100mm
300mm
2 x 19U, 19”, 450mm deep.
2 x 16U, 19”, 450mm deep
1 string x 100Ahr
2 strings x 150Ahr each cabinet
600Ahr total with left and right side cabinets
Ambient
Temperature
IP Rating
2.5kW per 10°C above ambient.
5kW per 15°C above ambient.
-20°C to +45°C Operating
-30°C to 60°C Storage
IP56 (equipment bay)
Seismic Rating
Wind survival
2g in any direction
40m/s (doors open)
Construction
Cabinet
Base
Plinth
Color/Finish
2.5mm marine grade aluminum, conversion
coated
5mm mild steel, hot zinc sprayed
3mm mild steel, hot zinc sprayed
Ghost Grey or Forest Green /Anti-graffiti
powder coat
In the interests of continual product improvement all specifications are
subject to change without notice.
Additional Heat
Exchangers
Side panel
LH Battery Cabinet
Internal Battery boxes
RH Battery Cabinet
64EATON DC Power Solutions Catalogue
Side panel
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
Eaton DC Power Solutions
Outdoor Enclosures
Mini Shelter Outdoor Power and
Mini Shelter Outdoor Power and
Equipment Enclosure
Equipment Enclosure
Features
•
Steel sandwich panel construction
•
Polyurethane insulation
•
Attractive powder coat finish
•
Vandal resistant 3 point locking
•
Galvanised steel base
•
48V DC Heat Exchanger for heat removal
•
Filtered air inlet/outlet to battery compartment
•
240V AC Heater
•
DC Power System options to 48V 10,800W, 225A
•
Suits 450Ah (48V) battery capacity
•
Remote monitoring and control of DC Power
System
•
AC Surge Protection, 48V Internal Service Light
•
Options for 24Vdc, 110Vdc or even 240Vac output
•
Options for battery or equipment expansion
The Eaton Mini Shelter is
designed to provide a secure and
clean environment to back-up
power, communications, IT, or
industrial equipment in a harsh or
outdoor situation. Typical
applications include cellular BTS
(base station transceivers), road &
rail traffic measurement, data and
metrological equipment, and
industrial process control. It is
suited to any application where
sensitive equipment and or back-up
power are required to be stationed
in an environmentally harsh
location.
The enclosure is designed to resist
the rigours of the environment, and
is made from insulated steel panels
and proprietary aluminium
extrusions. The insulated skin
design ensures heating from solar
insolation is minimised and a
secure 3 point locking system
together with an embedded door
and concealed hinges keep vandals
from gaining access to the
equipment within.
A 48V DC powered and
electronically controlled heat
exchanger removes waste heat
through a sealed radiator using high
reliability speed controlled fans.
The enclosure and heat
exchanger will ensure rain,
moisture, dust and vermin is
kept well away from the
equipment inside. An AC 240V
heater can maintain the internal
environment in sub-zero
situations.
A battery compartment in the
lower half of the cabinet is
thermally isolated from the
upper hot zone, ensuring best
possible life time for the critical
batteries. Options exist for
further cooling or heating of the
battery zone.
When using Eaton’s latest
technology APS-3G (Access
Power System) with hotswappable Energy Saver
APR48-ES rectifier modules and
SC200 controller, you can
provide a highly reliable DC
power source for your
equipment. When combined
with Eaton’s PW range SLA
batteries you have a fully uninterruptible power system to
support and run the cabinet and
its enclosed equipment.
eaton.com/telecompower
65
Outdoor Enclosures
Technical Specifications
Technical Specifications
Mechanical
Dimensions
Weight
Electrical
DC Power System
AC Input
905(w) x 2100(h) x 905(d) mm
225 kg (excluding DC power & batteries)
Meters and Adjustments
Service Light
APS6-3G series, 225A, 48V (10,800W)
1Ph 220/240V 50/60Hz nominal (see APS spec for
more detail)
Greater than 96% for full load with -ES rectifiers
6 x volt free c/o relays or RS232, Ethernet TCP/IP,
Web
Low Volts Disconnect, AC switch board
Temperature compensation, Fast charge,
Equalize, Battery test
Colour LCD and keypad. Also DC Tools software
48V LED service light panel
Batteries
Typical capacity
48V x 450Ah (2 shelves of 6 x 12V 150Ah FT)
Efficiency
Alarms
Standard Extras
Charging
Environmental
Cooling
Protection Level
Operating temperature
Internal temperature equipment
Internal temperature – battery
EMC
Construction
Cabinet
Base
Color/Finish
Fan forced DC heat exchanger, 80W/°K (requires
DC system)
IP55 in main (upper) equipment space
-10°C to 55 °C
+10°C above ambient for 800W internal heat load
+4°C above ambient
AS3548, CISPR 22 class B
Mild steel, polyurethane sandwich panel
MS hot dipped galvanised
Grey powder-coat to all external surfaces
Accessories
APS3-321
APS6-321
APR48-3G
APR48-ES
3G Access power system, 3U 19” 3 x rect bays, SC200
3G Access power System, 6U 19”, 6 x rect bays, SC200
Rectifier Module, 48V 37.5A, 1800W, 92% eff
Rectifier Module, 48V 42A, 2000W, Energy Saver, 96%
eff
Blank
Rectifier Blank Panel
PWTC12F150FR Battery 12V 150Ah, Front Terminal, SLA
PWTC12FG50FR Battery 12V 50Ah, Front Terminal, SLA, GEL
IPN
121051
121060
120890
61226207
121074
115425
61237831
In the interests of continual product improvement all specifications are subject to change
without notice
66EATON DC Power Solutions Catalogue
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
© 2014 Eaton Corporation.
All Rights
Notes
eaton.com/telecompower
67
Eaton ANZ support footprint
CAIRNS
TOWNSVILLE
MT ISA
GLADSTONE
BRISBANE
CANBERRA
PERTH
NEWCASTLE
ADELAIDE
SYDNEY
AUCKLAND
MELBOURNE
SALES
MANUFACTURING
SERVICE
T S
TA
LAUNCESTON
HOBART
WELLINGTON
CHRISTCHURCH
24 Hour Emergency Service Hotline
AUST: 1300 303 059
NZ: 0508 NZ SERVICE (0508 697 378)
Eaton Australia:
Eaton Industries Pty. Ltd.
Electrical Sector
10 Kent Road Mascot,
NSW 2020 Australia
1300 877 359
www.eaton.com/telecompower
Eaton New Zealand:
Eaton Industries Company
Electrical Sector
First Floor, Enable House,
106 Wrights Road, Addington,
Christchurch 8041 NZ
0508 EATON NZ (0508 328 666)
www.eaton.com/telecompower
Eaton is a registered trademark of
Eaton © 2014
All other trademarks are property
of their respective owners.
800PQ
In the interests of continuous product improvement all specifications are subject to change without notice. © 2014 Eaton All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement