ADVANCED PTZ/DVR

KEYBOARD CONTROLLER

INSTRUCTION MANUAL

English Version 1.0

ACCKBD200

Copyright ¤ 2009 Digimerge Technology Inc.

Right For Business

™ www.digimerge.com

SYSTEM CONTROLLER

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR

OTHER OPENINGS ON THE EQUIPMENT.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended

To alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

The presence of important operating and maintenance (servicing) instruction in the literature accompanying the product

FCC COMPLIANCE STATEMENT

FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A

CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO

PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS

OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE

RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION

MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS

EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE

USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR

COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

CE COMPLIANCE STATEMENT

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO

INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

- 2 -

SYSTEM CONTROLLER

CONTENTS

General Descriptions, Features …….. ………………………..…. 4

Installation ……………….....………………….…..…….5

Part names & Functions …………………... ………….…….………….6

Display LCD window ……………………....………………….......…….9

PTZ Control …..….……………....…...……....….…..…10

PTZ Configuration …..….……………....…...……....….…..…10

Hidden command …………………………………....………….………13

Specifications & Dimensions .………………....…………………………14

- 3 -

SYSTEM CONTROLLER

General Descriptions

The ACCKBD-200 is a pan/tilt controller and it allows operators to perform the following functions :

• Controls camera functions such as pan, tilt, zoom, and focus.

• Sets and calls camera preset positions

• Activates pre-programmed group presets, tour and group sequences.

The LCD is used to display current status as well as to provide a menu system for setting operational parameters.

Controller is designed for desktop operation; interface connectors are located in the Junctions box outer of the unit.

Features

• Recalls up to 255 cameras from one keyboard.

• Multiple protocol supported in each channel (Pelco D/P, Dongyang DRX-502, Samsung Techwin

SPD-2500, Samsung Electronics SCC-643)

• Preset position control.

• Variable manual control speed from 1°/sec to 90°/sec

• Maximum speeds are proportional to zoom ratio.

• Recalls programmed guard tours from each dome camera.

• Recalls Auto-Swing from selected dome camera.

• Built-in Graphic LCD monitor with blue screen.

• Programmable user preferences. (preset, tour, pattern, group, etc.)

• User password support.

• Easy upload programmed data via serial communication port of computer.

• Slave Keyboard support.

- 4 -

SYSTEM CONTROLLER

Installation

UNPACKING

Unpack the equipment and make sure all listed items are included in the box.

Product Carton 1

Keyboard controller ………………………………………………….……… 1

Junction box ………………………………………………………….………. 2

3m 6p cable RJ-11………………………………………………….………… 2

Instruction manual ….………….…………………………………………….. 1

Product Carton 2

12V DC Power Adaptor .……………………………………………………………. 1

1. CONNECTIONS

There are two connectors on the controller. These connectors are RJ connector for Master and

Slave control.

1.1 Open the junction box cover and connect the 12VDC power to the junction box number 3 and 6.

1.2 Connect 6-pin multi-wired cable between junction-box and keyboard.

1.3 Connect PTZ communication wires (RS-485, 2-wires) to the junction box number of 1 and 2.

1.4 Turn on the power , then you will get into the starting mode.

Junction Box

RJ-11 Cable Slave Port Master Port

④

⑤

⑥

①

②

③ ⑦

< Configuration of Junction Box >

① RS-485 (+) :Connect to PTZ (+)

② RS-485 (-) : Connect to PTZ(-)

③ Power input : DC12V (-)

④ Not used

⑤ Not used

⑥ Power input : DC12V (+)

⑦ RJ-11 Modular Jack : Connect to Controller

- 5 -

SYSTEM CONTROLLER

Parts name & functions

3 4 5 2 1

6

7

19 20 21 15 16 17 18

22

8 9 10 11 12 13 14

1. LCD Display: Displays numeric input, system status, function status, general status, etc.

2. Shows the communication status (Master / Slave)

3. Mon : Select output channel of Matrix Switcher

4. Quad : Select channel of Quad

5. Mux : Select channel of Mux

6. 0~9 :Numeric keypad :

7. CLR : Cancel key .

8. CAM :Select address of Camera, Mux, Quad and Matrix Switcher.

9. SHIFT : Key for special function (Customize).

10. SET : Connected equipment setting and system information setting.

11.12. IRIS Open ,12. IRIS Close :Camera Iris control.

13. 20.Near / Far Focus: Camera focus control.

14.21. Wide / Tele Zoom : Camera zoom control.

15. AUX On : AUX ON of Receiver unit.

16. AUX Off : AUX Off of Receiver unit.

17. System Hold : Used for system hold

18. Menu : Used for Camera (Pan/Tilt) Menu adjustment.

19. F1 ~ F5 : Function Keys (Preset, Group, Tour, Pattern, Scan).

22. Telemetry Joystick – It allows precise control of Pan/Tilt/Zoom & Moving to menu

- 6 -

SYSTEM CONTROLLER

Parts name & functions

1 2

1. Slave Port : Connect to Slave Communication Port.

2. Master Port : Connect to Master Communication Port

Drawing of Console Desk

The ACCKBD200 is designed to use on the console desk.

When you install the keyboard on the console desk , please make holes as below drawing.

Unit : mm

- 8 -

SYSTEM CONTROLLER

Display LCD window

(1) Initial display

PROTOCOL

PTZ ADDR

MON CHAN

PRE GRO TOUR

PELCO-D : 2400 BPS

001

001

SCAN PATT FOCUS ZOOM

1. C-001 : Shows the current camera No. (Address).

2. M-001 : Displays output channel of Matrix Switcher. (TBD)

3. DRX5 : Shows the selected camera protocol.

4. Func : Displays entered Key.

< Fig 1.1 >

Accessing to the camera menu :

This function is only for the speed dome camera

Select and control the camera

1) How to select Address Number 1 camera with Pelco-D protocol?

1

CAM

Camera Address Press CAM button

Move to next item by using joystick

PROTOCOL

PTZ ADDR

MON CHAN

PRE GRO TOUR

PELCO-D : 2400 BPS

001

001

SCAN PATT FOCUS ZOOM

2) How to select Address Number 2 camera with

DRX-502 protocol?

2

CAM

Camera Address Press CAM button

Move to next item by using joystick

PROTOCOL

PTZ ADDR

MON CHAN

DRX502A : 9600 BPS

002

001

PRE GRO TOUR SWING AUTO FOCUS ZOOM

- 9 -

SYSTEM CONTROLLER

• Control and Setting of PTZ Camera Functions

1. Setting to the camera functions

① Camera Setting Menu

1

MENU

<Pressing keypad “1” and holding the “MENU” key for approximately 2 seconds>

Camera Address Press MENU button

Each menu page is provided with a highlighted cursor which can be moved around the page using the Up,

Down Left & Right cursor keys with Joystick.

** Note: Dome camera menu is different according to camera manufacturers.

Please be noted dome camera instruction manual in detail menu explanation.

** In Pelco protocol, press “95” and “preset” to get into the Dome menu

2.Accessing to the camera functions

① Preset

1

F1

Press the preset number and PRE key(F1) on the keyboard.

The Monitor will show you the function name and you are operating now.

Preset number PRE KEY

① Group

1

F2

Press the preset number and GRO key(F2) on the keyboard.

The Monitor will show you the function name and you are operating now.

Group number GRO KEY

※ To using Preset, Group, Tour, Scan, Auto pan, Focus, Zoom functions of keyboard, user should store these functions on the camera Menu in advance.

These functions are different according to manufacturer. ACCKBD200 series support Pelco D/P, Dongyang

DRX-502, Samsung Techwin SPD-2500 and Samsung Electronics SCC-643 protocols.

- 10 -

• System Controller (Keyboard) Functions setting

1. System functions setting

PTZ Camera (Rx) and Protocol setting.

SYSTEM CONTROLLER

①

1

SET

<Pressing keypad “1” and holding the “SET” key for approximately 2 seconds>

② You will be prompted for a password if one has previously been set (factory default is “0000”.)

③ Set the information as LCD show you by using joystick.

④ PTZ Configuration is as below.

System

Setting

‘1’ + SET(-)

(2 seconds)

PASSWORD

Equipment number

Equipment number

PTZ

PTZ-K1

CAMERA

DVR

MATRIX

QUAD

ETC.

PROTOCOL

PELCO-D

PELCO-P

DRX-502

PELCO-A

SPD-2500

SCC-643

COMM SPEED

2400BPS

4800BPS

9600BPS

19200BPS

38400BPS

JOYSTICK

PROP.

ON-OFF

EXIT

Save &

Exit

Exit only

- 11 -

ACCKBD2000

PROTOCOL PELCO-D : 2400 BPS

PTZ ADDR 001

MON CHAN 001

PRE GRO TOUR SCAN PATT FOCUS ZOOM

PASSWORD?

1.

2.

3.

4.

NO. 001

TYPE PTZ

PROTOCOL DRX-502

COMM SPEED 2400 BPS

5.

6.

JOYSTICK PROP

EXIT

SYSTEM CONTROLLER

Accessing the system setup menu

Pressing keypad 1 and then holding the SET key for approximately 2 seconds.

It provides access to the system setup menu system.

Note: You will be prompted for a password if one has previously been set

(factory default is “0000”)

NO. : Select camera address to be changed.

TYPE : Select camera type.

PROTOCOL : Protocol select.

COMM SPEED : Select communication speed

** DRX-502 : 9600 bps

** Pelco D : 2400 bps

JOYSITCK: Select the way of Joystick control.

PROP : Proportional speed control.

ON-OFF : Fixed speed control.

EXIT

- 12 -

SYSTEM CONTROLLER

2.Hidden command

This hidden menu performs to operator to change PASSWORD and others.

①

2

SET

<Pressing keypad “2” and holding the “SET” key for approximately 2 seconds>

② You will be prompted for a password if one has previously been set (factory default is “0000”.)

③ Set the information as LCD show you by using joystick.

④ PTZ Configuration is as below.

System setting

‘2’ + Set(-)

(2 seconds)

PASSWORD

PASSWORD

Setting

OP Mode

Master

Slave

Sleep Time Joystick Version OEM Logo

Factory set

Start

Cancel

Exit

Save &

Exit

Exit Only

Buzzer

ON

OFF

- 13 -

SYSTEM CONTROLLER

Specifications

Model

Keyboard Communication

Connector Type Data

Keyboard Keypad

Joystick

Input Voltage

Power Consumption

LCD Display

Operating Temperature

Humidity

Dimensions & Weight

ACCKBD200

Pan/Tilt interface: RS-485

DVR interface: RS-485

Pan/Tilt operating distance: 4000 ft (1029m) on 24AWG wire

Protocol: Multiple (Pelco D/P, Dongyang DRX-502, Samsung Techwin

SPD-2500, Samsung Electronics SCC-643), Baud rate selectable

RJ-11 6-pin modular

PC Keyboard button

Numeric keypad and camera function keys.

Three-axis, vector solving, with twisting, return-to-center head

12V DC±2V

Max.150mA

Graphic display 240 x 64dots. Display 4-linex30-character alphanumeric LCD display with blue backlight.

0℃ to 45℃

10% -70% non-condensing

376(W) x 112(H) x 145(D), 1.3Kg

Dimensions

W

D

H

- 14 -