Operation Manual 11,659 KB
MODEL
LC-32D33X
LC-37D33X
LCD COLOUR TELEVISION
OPERATION MANUAL
32D33X_Cover.indd 1
2008-2-25 15:58:23
Blank page
32D33X_Cover2.indd 2
12/26/2007 08:43:00
OPERATION MANUAL
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
Contents
Introduction
Dear SHARP customer ................................................................................................ 1
Contents ....................................................................................................................... 1
Important Safety Precautions ..................................................................................... 4
Supplied accessories .................................................................................................. 5
Trademarks .................................................................................................................. 5
Preparation
Attaching the stand ..................................................................................................... 6
Part names ................................................................................................................... 7
TV (Front) .......................................................................................................... 7
TV (Rear) ........................................................................................................... 8
Remote control unit.......................................................................................... 9
Before turning on the power ..................................................................................... 10
Supplying electric power to the antenna ................................................................ 11
Initial auto installation ............................................................................................... 11
Checking signal strength and channel strength ..................................................... 12
Connecting external devices .................................................................................... 13
Connecting a VCR, game console or camcorder .......................................... 13
Connecting a DVD player ............................................................................... 13
Connecting a Digital TV STB (Set Top Box) ................................................... 14
Connecting a PC ............................................................................................ 14
Inserting the batteries ............................................................................................... 15
Using the remote control unit ................................................................................... 15
Cautions regarding the remote control unit ................................................... 15
Turning the TV on/off................................................................................................. 16
Turning on the power ..................................................................................... 16
Turning off the power ..................................................................................... 16
About Menu operations ............................................................................................. 17
What is Menu? ............................................................................................... 17
Basic Menu operations .................................................................................. 17
About Guide Display ...................................................................................... 17
Menu items (TV/INPUT 1-2) ........................................................................... 18
Menu items (HDMI/RGB)................................................................................ 19
Watching TV
Setting channels automatically ................................................................................ 20
Selecting programmes .............................................................................................. 21
Adjusting the volume ................................................................................................. 21
Menu language settings ............................................................................................ 21
Setting channels to your preference........................................................................ 22
Digital Settings ............................................................................................... 22
Manual setting for each channel (Analogue) .................................................. 23
Sorting programmes ...................................................................................... 25
Erasing programmes ...................................................................................... 25
Useful viewing functions ........................................................................................... 26
Returning to the previously selected channel ................................................ 26
Freezing the image ......................................................................................... 26
Muting the audio temporarily ......................................................................... 26
1
32D33X_en_a.indd 1
2008-1-24 14:52:06
Contents
Watching TV (Continued)
Outputting only audio..................................................................................... 26
Switching the analogue audio format ............................................................ 27
Switching the digital audio format ................................................................. 27
Password setting for the child lock (for TV input mode) ................................ 28
Parental Rate.................................................................................................. 29
Programme Title Display ................................................................................ 29
Key Lock ........................................................................................................ 29
Energy conservation settings ................................................................................... 30
Auto power-off at a designated time ............................................................. 30
Auto power-off after the end of broadcast .................................................... 30
Auto power-off when there are no operations performed ............................. 30
Ecology ......................................................................................................... 30
Reducing the start-up time ........................................................................... 31
Picture size settings .................................................................................................. 32
Selecting the Wide Screen Signalling (WSS) picture size automatically ........ 32
Selecting the Wide Screen Signalling (WSS) picture size manually ............... 32
Selecting the picture size manually ................................................................ 33
Selecting a preset AV MODE .................................................................................... 34
Manual picture settings............................................................................................. 35
Picture adjustment ......................................................................................... 35
Advanced picture settings ............................................................................. 36
Other picture settings................................................................................................ 37
DNR (Digital Noise Reduction) ....................................................................... 37
Adjusting the image position.......................................................................... 37
Game Play Time ............................................................................................ 37
Indicating time on the screen ......................................................................... 38
Audio adjustment ....................................................................................................... 39
Output Volume Select ................................................................................... 39
Automatic Volume Adjustment....................................................................... 40
Clear Voice ..................................................................................................... 40
Digital Audio Output ....................................................................................... 40
Using Digital Audio Output............................................................................. 40
Programme Guide .......................................................................................... 41
Info ................................................................................................................. 41
Favourite Channel Setting......................................................................................... 42
ATV (Analogue)/DTV/RADIO buttons ....................................................................... 43
EPG ............................................................................................................................. 44
EPG display settings ...................................................................................... 44
Time Zone ...................................................................................................... 44
Selecting a programme using EPG .......................................................................... 45
Basic Operation.............................................................................................. 45
Selecting a programme .................................................................................. 45
Timer recording using EPG ....................................................................................... 47
Cancelling the timer recording ................................................................................. 47
Settings when using external devices
Settings when using HDMI output devices ............................................................. 48
Selecting the input source and signal type ............................................................ 50
Selecting input source ................................................................................... 50
Selecting input signal type ............................................................................ 50
Selecting the size of the picture for recording ............................................... 50
Labelling input sources ............................................................................................. 51
Skipping HDMI/RGB input ....................................................................................... 51
Colour system settings ............................................................................................. 51
2
32D33X_en_a.indd 2
2008-1-24 14:52:08
Contents
AQUOS LINK
Controlling HDMI devices using AQUOS LINK ....................................................... 52
AQUOS LINK connection .......................................................................................... 53
Connecting an AQUOS BD Player/AQUOS Recorder via the AQUOS
AUDIO ........................................................................................................ 53
Connecting an AQUOS BD Player/AQUOS Recorder only ............................ 53
AQUOS LINK Setup ................................................................................................... 53
AQUOS LINK Auto power on ......................................................................... 53
Selecting recorder .......................................................................................... 54
Using Genre Info. ........................................................................................... 54
Operating an AQUOS LINK device ........................................................................... 54
Listening with the 1 BIT THEATER RACK SYSTEM (AQUOS AUDIO) ........... 54
Listening with the AQUOS TV speaker system .............................................. 55
Manually changing the AQUOS Audio speaker system’s sound mode ......... 55
Playback of titles using AQUOS LINK............................................................ 55
Selecting media type for CEC-compatible recorder ...................................... 56
One Touch Recording (DTV only) ................................................................... 56
HDMI device selection ................................................................................... 56
Recording via the AQUOS Recorder EPG (only for recorders) ...................... 56
Connecting a PC
HDMI Connection....................................................................................................... 57
Analogue Connection ................................................................................................ 57
Displaying a PC image on the screen ...................................................................... 58
Selecting the picture size ............................................................................... 58
Adjusting the PC image automatically ........................................................... 59
Adjusting the PC image manually .................................................................. 59
Input resolution settings ........................................................................................... 60
Selecting the input resolution......................................................................... 60
PC Control of the TV .................................................................................................. 61
PC compatibility chart ............................................................................................... 62
RS-232C commands list ............................................................................................ 62
Teletext function
About Teletext ............................................................................................................ 63
Teletext language setting.......................................................................................... 64
Displaying Subpages ................................................................................................. 64
Time display ............................................................................................................... 65
Displaying Subtitles ................................................................................................... 66
Switching subtitle languages (DVB Subtitle) ........................................................... 66
Appendix
Troubleshooting ......................................................................................................... 67
Troubleshooting-Digital broadcasting ..................................................................... 67
Error messages about recording using AQUOS LINK ........................................... 68
Reset ........................................................................................................................... 69
Information ................................................................................................................. 69
Message List .................................................................................................. 69
Receiver Report ............................................................................................. 69
Identification .............................................................................................................. 69
Specifications............................................................................................................. 70
Optional accessory ................................................................................................... 70
Dimensional drawings ............................................................................................... 71
Mounting the TV on the wall .................................................................................... 73
Removing the stand ...................................................................................... 73
Handling and precautions with the wall-mounted TV ................................... 73
Wall Mounting ............................................................................................... 74
CLEARING THE PASSWORD .................................................................................... 76
Information on the software license for this product............................................. 77
3
32D33X_en_a.indd 3
2008-3-11 9:19:18
Important Safety Precautions
• Cleaning — Unplug the AC cord
from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use liquid
cleaners or aerosol cleaners.
• Water and moisture — Do not use
the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in a
wet basement.
• Do not place vases or any other
water-filled containers on this product.
The water may spill onto the product
causing fire or electric shock.
• Stand — Do not place the product
on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as damage
to the product. Use only a cart,
stand, tripod, bracket or table
recommended by the manufacturer
or sold with the product. When
mounting the product on a wall, be
sure to follow the manufacturer’s
instructions. Use only the mounting
hardware recommended by the
manufacturer.
• When relocating the product
placed on a cart, it must be moved
with utmost care. Sudden stops,
excessive force and uneven floor
surface can cause the product to fall
from the cart.
• Ventilation — The vents and other
openings in the cabinet are designed
for ventilation. Do not cover or block
these vents and openings since
insufficient ventilation can cause
overheating and/or shorten the life
of the product. Do not place the
product on a bed, sofa, rug or other
similar surface, since they can block
ventilation openings. This product is
not designed for built-in installation;
do not place the product in an
enclosed place such as a bookcase
or rack, unless proper ventilation
is provided or the manufacturer’s
instructions are followed.
• The LCD panel used in this product
is made of glass. Therefore, it can
break when the product is struck
forcefully or with a sharp object. If
the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product
away from heat sources such as
radiators, heaters, stoves and other
heat-generating products (including
amplifiers)
• To prevent fire, never place any type
of candle or naked flames on the
top or near the TV set.
• To prevent fire or shock hazard, do
not place the AC power cord under
the TV set or other heavy items.
• Do not place heavy objects on this
product or stand on it. Doing so
could cause injury if the product
overturns. Take special care near
children and pets.
The LCD panel is a very high technology product
with 1,049,088 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally
a few non-active pixels may appear on the screen
as a fixed point of blue, green or red.
This is within product specifications and does not
constitute a fault.
Precautions when
transporting the TV
Be sure to always carry the TV
by two people holding it with two
hands — one hand on each side
of the TV.
• Do not display a still picture for a long time, as this could
cause an afterimage to remain.
• Install the product on the place where the AC cord can
be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear of the product.
4
32D33X_en_b.indd 4
2008-2-25 16:00:41
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit
Used with batteries inserted.
Page 9
“AAA” size battery (g2)
AC cord
Always use the AC cord supplied with
the TV.
Page 10
Page 15
Cable clamp
Stand unit
Stand base
Stand post
Short screws (g9)
Hex key
Cloth
For bundling cables.
Put all parts of the stand unit together and then attach it to the TV.
Page 10
Page 6
Operation manual
Trademarks
• TruSurround XT, SRS and h® symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
• The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project.
• Manufactured under license from Dolby Laboratories.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
5
32D33X_en_b.indd 5
2008-1-24 14:52:28
Preparation
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm the screws supplied with the TV.
Screws (g4)
(used in step 3)
3
Screws (g5)
(used in step 2)
1 Insert the stand into the openings on the
bottom of the TV.
2 Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
Hex key
2
Attach the supporting post for the stand unit
onto the base as shown below.
Screw
Screw
Soft
cushion
Hex
key
NOTE
• To detach the stand, perform the steps in reverse order.
6
32D33X_en_b.indd 6
2008-1-24 14:52:29
Preparation
Part names
TV (Front)
TV/VIDEO button
Channel up (r)/down (s) buttons
MENU button
Volume up (e)/down (f) buttons
POWER (On/Off) button
Remote control sensor
OPC indicator*
OPC sensor
SLEEP timer indicator
POWER indicator**
*OPC: Optical Picture Control (See page 35.)
** See page 16 for the TV status indicator.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-37D33X.
7
32D33X_en_b.indd 7
2008-2-25 16:01:24
Preparation
TV (Rear)
AC INPUT terminal
INPUT 3 (HDMI) terminals
DIGITAL AUDIO OUTPUT
terminal
RS-232C terminal
INPUT 4 (HDMI) terminal
INPUT 5 (PC) terminals
Headphone jack
INPUT 1 terminals
MONITOR OUTPUT
terminals
Antenna input terminal
SERVICE ONLY
terminal*
INPUT 2 terminals
* Usually do not connect anything to this
terminal as it is reserved only for service
personnel.
Regarding the headphone jack
• Use headphones with a stereo mini plug (Ø 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
• You can set the volume to different levels for each input source.
Volume display when headphones are plugged in
20
8
32D33X_en_b.indd 8
2008-2-25 16:01:25
Preparation
Remote control unit
7
8
1
13
9
10
11
2
12
3
14
4
5
6
7
8
9
10
15
16
17
18
19
20
21
22
11
23
14
24
15
13
16
12
17
25
18
19
20
21
22
1
2
3
4
5
6
POWER (STANDBY/ON)
To switch the power on and off. (See page 16.)
0–9
Set the channel. (See page 21.)
TELETEXT mode: Set the page. (See pages 63 and 65.)
A (Flashback)
Press to return to the previous selected channel or external input
mode. (See page 26.)
ATV
Press to access ANALOGUE mode. (See page 43.)
DTV
Press to access DTV mode. (See page 43.)
MPX
Select the sound multiplex mode. (See page 27.)
23
24
25
VOLk/VOLl
Set the volume. (See page 21.)
e (Mute)
Mute the sound. (See page 26.)
GUIDE
DTV mode: Display the programme list. (See page 41.)
EPG
DTV mode: To display EPG (Electronic Programme Guide) screen.
(See page 44 to 47.)
EXIT
Turn off the On-Screen Display.
OPC
To switch the Optical Picture Control on and off. (See page 35.)
AV MODE
Select a video setting. (See page 34.)
WIDE
Change the wide image mode. (See pages 33 and 58.)
FREEZE
Freeze a motion picture on the screen. (See page 26.)
m (TELETEXT)
Select the TELETEXT mode. (all TV image, all TEXT image, TV/
TEXT image) (See pages 63 to 66.)
k (Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page 63.)
[ (SUBTITLE for TELETEXT)
To turn the subtitles on and off. (See page 64.)
3 (Hold)
TELETEXT mode: Stop updating Teletext pages automatically.
Press 3 again to release the hold mode. (See pages 63 and 64.)
1 (Subpage)
Display the Teletext subpage directly. (See page 65.)
v (Top/Bottom/Full)
TELETEXT mode: Set the area of magnification. (See page 63.)
TV/VIDEO (INPUT SOURCE)
Select an input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4,
INPUT5 (PC)) (See pages 13, 48, 51 and 57.)
FAV.
Display the favourite channel setting. (See page 42.)
RADIO
Press to access RADIO mode. (See page 43.)
DISPLAY
Displays the channel or input information.
DTV mode: Displays the time information included in the DTV
broadcast.
TELETEXT mode: Displays the time information included in the
Teletext broadcast. (See page 65.)
CHr/CHs
TV input mode: Select the channel. (See page 21.)
TELETEXT mode: Select the page. (See pages 63 and 65.)
SLEEP
Set the Sleep timer. (See page 30.)
INFO
DTV mode: Display the programme information. (See page 41.)
MENU
Display the menu screen. (See page 17.)
a/b/c/d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
RETURN
MENU mode: Return to the previous menu screen. (See page 17.)
Colour (Red/Green/Yellow/Blue)
Select four preset favourite channels in four different categories.
(See page 42 for details.)
While watching, you can toggle the selected channels by pressing
R, G, B and Y.
TELETEXT mode: Select a page. (See page 63.)
AQUOS LINK buttons
If external equipment such as a AQUOS BD Player is connected
via HDMI cables and is AQUOS LINK compatible, you can use
these AQUOS LINK buttons. See pages 52 to 56 for details.
9
32D33X_en_b.indd 9
2008-1-25 15:18:26
Preparation
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
1
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Antenna cable
(commercially available)
Room antenna terminal
(75-ohm type)
To antenna
terminal
2
Connecting external devices
See pages 10, 13 and 14 for connecting external equipment, such as a VCR and DVD player.
3
Connecting the AC cord
TV (rear view)
AC outlet
AC cord
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
4
Bundling the cables
Insert the cable clamp in the hole on the TV as shown.
Cable clamp
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
10
32D33X_en_b.indd 10
2008-1-25 15:18:27
Preparation
Supplying electric power to the
antenna
When you set-up the DTV antenna for the first time,
or connect the antenna to a community antenna, you
need to proceed to set the antenna by following this
manual.
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Confirm the following before turning on the
power
• Is the antenna cable connected?
• Is the AC cord plugged in?
1
1
Press POWER on the TV.
2
Setting the on-screen display language.
• The initial auto installation wizard appears.
Press MENU and the MENU screen displays.
English
2
Press c/d to select “Setup”.
3
Press a/b to select “Antenna SetupDIGITAL” and then press ENTER.
4
Press a/b to select “Supply Voltage” and
then press ENTER.
3
5
Press c/d to select “On” and then press
ENTER.
4
Selected item
Select “On” when your antenna is set-up
and connected independently.
Off
Select “Off” when you do not need to
supply voltage to your antenna, i.e.
when your antenna is connected to a
community antenna. (The factory default
setting of this function is “Off”.)
Press ENTER.
Major Analogue Channel settings are pre-set.
However, if there are any channel(s) that you
cannot receive with the factory pre-sets, please
perform “Auto Installation” in “Setup” section
(refer chapter “Watching TV” on manual).
Description
On
Press a/b to select the desired language,
and then press ENTER.
Digital Search
• Major Analogue Channel settings are pre-set.
However, if there are any channel(s) that you
cannot receive with the factory pre-sets, please
perform “Auto Installation” in “Setup” section (See
page 20).
5
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress,
press END.
NOTE
• If you turn off the power on the TV after performing step 4,
the initial auto installation wizard does not appear. The auto
installation function allows you to execute the installation
again from the Setup menu. (Page 20)
• The initial auto installation wizard will go off if you leave
the TV unattended for 30 minutes before searching for
channels in step 5.
11
32D33X_en_b.indd 11
2008-1-24 14:52:31
Preparation
Checking signal strength and
channel strength
If you install a DVB-T antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking
the antenna setup screen.
1
2
3
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna SetupDIGITAL”, and then press ENTER.
H Checking signal strength
Press a/b to select “Signal Strength”.
Supply Voltage
Signal Strength
Channel Strength
CH No.
21
Signal Strength
Current
Quality
0
Max
0
Current
0
Max
0
H Checking channel strength
Press a/b to select “Channel strength”, and
then press ENTER.
Supply Voltage
Signal Strength
Channel Strength
2
6
CH No.
5 . 2
MHz
21
Signal Strength
4
Current
Quality
0
Max
0
Current
0
Max
0
Position and align the antenna so that the
maximum possible values for “Signal Strength”
and “Quality” are obtained.
NOTE
• The values of “Signal Strength” and “Quality” indicate when
to check the appropriate alignment of the antenna.
12
32D33X_en_b.indd 12
2008-1-24 14:52:31
Preparation
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from TV/
VIDEO on the remote control unit or TV/VIDEO on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using
the INPUT 1/INPUT 2 terminals.
When using component cable
(commercially available)
Y
When using composite cable or
S-VIDEO cable (commercially available)
S-VIDEO
PB
(CB)
PR
(CR)
or
R
AUDIO
L
R
AUDIO
L
VCR/
Game console/
Camcorder
VIDEO
VCR/
Game console/
Camcorder
Connecting a DVD player
You can use the INPUT 1/INPUT 2, INPUT 3/INPUT 4 (HDMI) terminals when connecting to a DVD player and
other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 48.)
When using HDMI-certified cable
(commercially available)
When using component cable
(commercially available)
Y
PB
(CB)
PR
(CR)
DVD player
R
AUDIO
L
DVD player
13
32D33X_en_b.indd 13
2008-1-24 14:52:31
Preparation
Connecting a Digital TV STB (Set Top Box)
You can use the INPUT 1/INPUT 2 or INPUT 3/INPUT 4 (HDMI) terminals when connecting to a Digital TV STB (Set
Top Box) and other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 48.)
When using HDMI-certified cable
(commercially available)
When using component cable
(commercially available)
Y
PB
(CB)
PR
(CR)
Digital TV
STB
(Set Top Box)
R
AUDIO
L
Digital TV STB
(Set Top Box)
Connecting a PC
You can use the INPUT 5 (PC) terminal when connecting
to a PC. (See page 58.)
ANALOG
RGB
AUDIO
(L/R)
PC
14
32D33X_en_b.indd 14
2008-1-24 14:52:32
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1 Open the battery cover.
2 Insert the two supplied “AAA” size 3 Close the battery cover.
batteries.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Using the remote control unit
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
30º
5m
30º
30º
Remote control sensor
30º
Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids or place it in
an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor
window of the TV is under direct sunlight or strong lighting. In such
cases, change the angle of the lighting or TV, or operate the remote
control unit closer to the remote sensor window.
15
32D33X_en_b.indd 15
2008-1-24 14:52:32
Preparation
Turning the TV on/off
Turning on the power
Turning off the power
Press POWER on the TV.
POWER button
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power “ON” by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
POWER button
Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
POWER indicator
POWER indicator
Light off
Power off
Lighted (Red)
The TV is in standby mode.
Lighted (Green)
The TV is on.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
16
32D33X_en_c.indd 16
2008-1-24 14:52:54
Preparation
About Menu operations
H Using the control panel of the TV
What is Menu?
• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called “Menu”.
• The Menu enables various settings and adjustments. (See
pages 18 and 19.)
• The Menu can be operated with the remote control unit.
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
Basic Menu operations
1
TV control panel buttons
Remote control buttons
TV/VIDEO
ENTER
CH r
a
CH s
b
VOL k
d
VOL l
c
Press MENU and the MENU screen displays.
MENU
[Picture]
Picture
Audio
Power Control
DYNAMIC
OPC
[Off]
–16
+16
0
+40
–30
+30
Backlight
[+14]
Contrast
[+30]
Brightness
[0]
Colour
[0]
–30
+30
Tint
[0]
–30
+30
Sharpness
[0]
–10
+10
Advanced
Reset
2
Press c/d to select the desired menu, and
then press ENTER.
About Guide Display
Power Control
Audio
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
DYNAMIC
Treble
[ 0]
–15
+15
Bass
[ 0]
–15
+15
Balance
[ 0]
L
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
R
Surround
[Off]
Bass Enhancer
[Off]
: Select
ENTER
: Enter
RETURN
: Back
MENU
: End
Reset
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
Audio
Power Control
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
DYNAMIC
Treble
[ 0]
–15
+15
Bass
[ 0]
–15
+15
Balance
[ 0]
L
R
Surround
[Off]
Bass Enhancer
[Off]
Reset
4
5
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Press EXIT or MENU to exit the MENU.
Press RETURN as necessary to return to the
previous MENUs.
32D33X_en_c.indd 17
17
2008-2-26 15:36:07
Preparation
Menu items (TV/INPUT 1-2)
List of menu items to help you with operations
Picture
OPC ............................................................................. Page 35
Backlight .................................................................... Page 35
Contrast ...................................................................... Page 35
Brightness .................................................................. Page 35
Colour ......................................................................... Page 35
Tint .............................................................................. Page 35
Sharpness .................................................................. Page 35
Advanced
Colour Temp. .................................................. Page 36
Film Mode ........................................................ Page 36
Active Contrast ............................................... Page 36
3D-Y/C ............................................................. Page 36
Monochrome ................................................... Page 36
Range of OPC.................................................. Page 36
Reset ........................................................................... Page 35
Option
AQUOS LINK Setup .................................................... Page 53
DNR.............................................................................. Page 37
Input Select ................................................................. Page 50
Output Volume Select ................................................ Page 39
Auto Volume................................................................ Page 40
Clear Voice .................................................................. Page 40
Digital Audio Output ................................................... Page 40
Audio Only ................................................................... Page 26
Programme Title Display ........................................... Page 29
Time Display................................................................ Page 38
Game Play Time .......................................................... Page 37
Colour System ............................................................ Page 51
Key Lock...................................................................... Page 29
Digital Setup
Audio
Treble .......................................................................... Page 39
Bass ............................................................................ Page 39
Balance ....................................................................... Page 39
Surround ..................................................................... Page 39
Bass Enhancer ............................................................ Page 39
Reset ........................................................................... Page 39
Power Control
REC Picture Size......................................................... Page 50
EPG Setup ................................................................... Page 44
Subtitle ........................................................................ Page 64
Time Zone ................................................................... Page 44
Information
Message List ............................................................... Page 69
Receiver Report .......................................................... Page 69
No Signal Off .............................................................. Page 30
No Operation Off ....................................................... Page 30
Ecology ....................................................................... Page 30
Setup
Auto Installation.......................................................... Page 20
Programme Setup ............................................... Pages 22-25
Child Lock ................................................................... Page 28
Antenna Setup-DIGITAL............................................. Page 12
Input Skip .................................................................... Page 51
Input Label .................................................................. Page 51
Position........................................................................ Page 37
WSS ............................................................................. Page 32
4:3 Mode ...................................................................... Page 32
Standby Mode ............................................................. Page 31
Language..................................................................... Page 21
Text Language ............................................................ Page 66
Identification ............................................................... Page 69
Reset............................................................................ Page 69
NOTE
• Some menu items may not be displayed depending on the selected input source.
18
32D33X_en_c.indd 18
2008-3-11 9:19:49
Preparation
Menu items (HDMI/RGB)
List of menu items to help you with operations
Picture
OPC ............................................................................. Page 35
Backlight .................................................................... Page 35
Contrast ...................................................................... Page 35
Brightness .................................................................. Page 35
Colour ......................................................................... Page 35
Tint .............................................................................. Page 35
Sharpness .................................................................. Page 35
Advanced
Colour Temp. .................................................. Page 36
Film Mode ........................................................ Page 36
Active Contrast ............................................... Page 36
Monochrome ................................................... Page 36
Range of OPC.................................................. Page 36
Reset ........................................................................... Page 35
Audio
Treble .......................................................................... Page 39
Bass ............................................................................ Page 39
Balance ....................................................................... Page 39
Surround ..................................................................... Page 39
Bass Enhancer ............................................................ Page 39
Reset ........................................................................... Page 39
Setup
Input Skip .................................................................... Page 51
Input Signal ................................................................. Page 60
Auto Sync. ................................................................... Page 59
Input Label .................................................................. Page 51
Position........................................................................ Page 37
Fine Sync. .................................................................... Page 59
HDMI Auto View.......................................................... Page 48
Standby Mode ............................................................. Page 31
Language..................................................................... Page 21
Reset............................................................................ Page 69
Option
AQUOS LINK Setup .................................................... Page 53
DNR.............................................................................. Page 37
HDMI Audio Select ..................................................... Page 49
Output Volume Select ................................................ Page 39
Auto Volume................................................................ Page 40
Clear Voice .................................................................. Page 40
Audio Only ................................................................... Page 26
Time Display................................................................ Page 38
Game Play Time .......................................................... Page 37
Key Lock...................................................................... Page 29
Power Control
No Signal Off .............................................................. Page 30
No Operation Off ....................................................... Page 30
Ecology ....................................................................... Page 30
Information
Message List ............................................................... Page 69
Receiver Report .......................................................... Page 69
NOTE
• Some menu items may not be displayed depending on the selected input source.
19
32D33X_en_c.indd 19
2008-3-11 9:19:50
Watching TV
Setting channels automatically
You can run auto installation again, even after setting
up the preset channels.
4
If you have already set the password, enter it
here.
• See page 28 for setting a password.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
5
Press c/d to select “Yes”, and then press
ENTER.
6
Press a/b to select the desired language
listed on the screen, and then press ENTER.
You do not need to do anything during the
auto search.
Press RETURN to exit.
Press a/b to select “Auto Installation”, and
then press ENTER.
MENU
[Setup ... Auto Installation]
Setup
Option
Auto Installation
Programme Setup
Child Lock
Antenna Setup-DIGITAL
Input Skip
Position
WSS
[On]
4:3 Mode
[Normal]
Standby Mode
[Mode2]
Language
Text Language
[English]
[West Europe]
Identification
Reset
20
32D33X_en_c.indd 20
2008-2-25 16:02:30
Watching TV
Selecting programmes
Adjusting the volume
You can change channels in several ways.
Using CHr/s on the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.
NOTE
• CHr/s on the TV operates the same as CHr/s on
the remote control unit.
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
20
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
NOTE
• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and
“INPUT5” (PC) modes can store volume adjustment values
separately.
Menu language settings
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.
You can also select a language from setup menu.
Select from among 4 languages: English, Simplified
Chinese, Traditional Chinese and Arabic.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Language”, and then
press ENTER.
4
Press a/b to select the desired language
listed on the screen, and then press ENTER.
21
32D33X_en_c.indd 21
2008-2-25 16:02:31
Watching TV
Setting channels to your preference
1
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.
2
Press a/b to select the desired service.
Press the colour button on the remote control
corresponding with the item you want to
reconfigure.
• The ✔ mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
Buttons for Manual Adjust operation
Menu items
Remote control
buttons
Lock
R
When the service is
locked, you must enter
your password whenever
you tune to the service.
CH Skip
G
Services with a ✓ mark
are passed over when
pressing P r/s in the
TV/remote control unit.
EPG Skip
Y
Services with a ✓ mark
are passed over in the
Electronic Programme
Guide (EPG).
Sort
B
The item position of
services can be sorted.
Digital Settings
You can reconfigure DTV services settings
automatically or manually.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
3
Press a/b to select “Programme Setup”, and
then press ENTER.
4
Press a/b to select “Digital Setting”, and then
press ENTER.
5
Press a/b to select the desired menu item,
and then press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
6
H Additional Search
Use this menu to add new services automatically after
auto installation has been completed.
H Manual Search
Description
The item position of services can be shorted.
1 Press a/b to select the service whose item
position you want to move, and then press B.
DTV
994
SIT 2
DTV
995
SIT 1
✔
✔
✔
2 Press a/b to move it to the desired position, and
then press ENTER.
DTV
994
SIT 1
DTV
995
SIT 2
✔
✔
✔
3 Repeat steps 1 and 2 until all desired service
items are sorted.
Add new services within a specified frequency band.
• Enter the frequency using 0 - 9 numeric buttons.
H Manual Adjust
Configure various settings for each service using the
Colour (R, G, Y, B) buttons.
MENU
[Setup ... Programme Setup ... Digital Setting ... Manual Adjust]
Service
No.
Service
Name
DTV
993
SIT 3
DTV
994
SIT 2
DTV
995
SIT 1
DTV
996
Monosco 576-2
DTV
997
Monosco 576-1
DTV
998
Color Bar 576i
DTV
999
R
: Lock
Lock
CH
Skip
EPG
Skip
✔
Old
LCN
✔
✔
HD Monosco
G
: CH Skip
Y
: EPG Skip
B
: Sort
22
32D33X_en_c.indd 22
2008-2-25 16:02:31
Watching TV
Manual setting for each channel (Analogue)
You can set some channel items manually. They are
Search, Fine (TV frequency), Colour sys., Sound sys.,
Label (Network name), Skip and Lock (Child Lock).
1
3
Press MENU and the MENU screen displays.
Press a/b to select item and press ENTER.
• Next: Search the next channel.
• Store: Memorise the current display channel.
• Cancel: Return to the previous screen. (The
search result will not be stored.)
Fine tuning
2
3
Press c/d to select “Setup”.
1
Press a/b to select “Programme Setup”, and
then press ENTER. If you have already set the
password, enter it here.
• The selected channel information displays.
2
Press a/b to select “Fine”, and then press
ENTER.
3
Press c/d to adjust the frequency, and then
press ENTER.
• See page 28 for setting a password.
4
Press a/b to select “Digital Setting” or
“Analogue Setting”, and then press ENTER.
5
Press a/b to select “Manual Adjust”, and
then press ENTER.
6
Press c/d to select “Yes”, and then press
ENTER.
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• Adjust while checking the background picture as
a reference.
Search
Fine
[179.25]
Colour sys.
[Auto]
Sound sys.
[B/G]
Label
Programme Setup “Manual Adjust” menu
01 SAT.1
02 PR07
03 KABEL
[SAT.1]
Skip
[Off]
Lock
[Off]
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
You can select one of the following settings.
Search (See page 23.)
Fine (See page 23.)
Colour sys. (See page 23.)
Sound sys. (See page 24.)
Label (See page 24.)
Skip (See page 24.)
Lock (See page 24)
Colour system
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
2
Search tuning
1
MHz
• Instead of the method above, you can also set
by directly entering the frequency number of the
channel with 0 — 9.
• When setting a frequency on the “Fine” screen,
the last figure of the frequency needs to be “0” or
“5”.
Next
1
2
3
4
5
6
7
179.25
Press a/b to select “Colour sys.”, and then
press ENTER.
• Receivable colour systems are listed.
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
Colour system menu
MENU
[Setup ... Programme Setup]
• The selected channel information displays.
Search
2
Press a/b to select “Search”, and then press
ENTER.
MENU
Fine
[Setup ... Programme Setup]
[179.25]
Colour sys.
[Auto]
Sound sys.
[B/G]
Label
Auto
PAL
[SAT.1]
SECAM
Search
Fine
[Off]
Lock
[Off]
[179.25]
Colour sys.
[Auto]
Sound sys.
[B/G]
Label
Skip
[SAT.1]
179.25
Next
Skip
[Off]
Store
Lock
[Off]
Cancel
MHz
3
Press a/b to select the optimum colour
system, and then press ENTER.
23
32D33X_en_c.indd 23
2008-1-24 14:52:57
Watching TV
Manual setting for each channel (continued)
Sound system (Broadcasting system)
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Sound sys.”, and then
press ENTER.
• Receivable sound systems (Broadcasting systems)
are listed.
Sound system menu
Skipping channels
Channels with “Skip” set to “On” are passed over
when using CHr/s even if selected while watching
the image from the TV.
1
• The selected channel information will be displayed.
2
[179.25]
Colour sys.
[Auto]
Sound sys.
[B/G]
Label
Press a/b to select “Skip”, and then press
ENTER.
• Skip menu displays.
Search
Fine
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
Skip menu
B/G
MENU
D/K
[SAT.1]
I
Skip
[Off]
Lock
[Off]
[Setup ... Programme Setup]
Search
Fine
3
Press a/b to select the optimum sound
system, and then press ENTER.
Labelling channels
When a TV channel sends its Network Name, the auto
installation detects the information and assigns a name
to it. However, you can change individual channel
names.
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Label”, and then press
ENTER.
• The alphabet and numbers are listed.
[Auto]
Sound sys.
[B/G]
Label
3
[179.25]
Colour sys.
[SAT.1]
Skip
[Off]
Lock
[Off]
Press a/b to set “Skip” to “On”, and then
press ENTER.
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information will be displayed.
2
Press a/b to select “Lock”, and then press
ENTER.
• Child lock menu will be displayed
Lock menu
Search
3
4
[179.25]
Colour sys.
[Auto]
Sound sys.
[B/G]
Label
On
Setting the child lock
You can block the viewing of any channel.
Labelling menu
Fine
Off
[SAT.1]
Skip
[Off]
Lock
[Off]
Search
A B C D E
K
I
J
CLEAR
Fine
L M N O P Q R S
T
BACK
Colour sys.
[Auto]
Sound sys.
[B/G]
F G H
U V W X Y Z
+
0
6
1
2
3
4
5
7
.
_
8
9
END
Press a/b/c/d to select each character of
the new name for the channel, and then press
ENTER.
Repeat until the name is fully spelt out.
• The name can be 5 characters or less.
• When you want to set a channel name of less
than 5 characters, select “END”.
Label
3
[179.25]
[SAT.1]
Skip
[Off]
Lock
[Off]
Off
On
Press a/b to set “Lock” to “On”, and then
press ENTER.
NOTE
• See page 28 for setting a password.
• If “Lock” is set to “On” for a channel, “Child lock has been
activated” is displayed when you select the channel, and
the image and sound of the channel is blocked.
• When pressing RETURN while “Child lock has been
activated” is displayed, password input menu will be
displayed. Inputting the correct password lifts the child lock
temporarily until the power is turned off.
24
32D33X_en_c.indd 24
2008-1-24 14:52:58
Watching TV
Sorting programmes
Erasing programmes
Channel positions can be sorted freely.
The individual programme can be erased.
1
Press MENU and the MENU screen displays.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
3
Press a/b to select “Programme Setup”, and
then press ENTER.
If you already set the password, enter it here.
3
Press a/b to select “Programme Setup”, and
then press ENTER.
• See page 28 for setting a password.
• See page 28 for setting a password.
4
Press a/b to select “Analogue Setting”, and
then press ENTER.
5
Press a/b to select “Sort”, and then press
ENTER.
6
Press c/d to select “Yes”, and then press
ENTER.
7
Press a/b/c/d to select the channel you
want to move, and then press ENTER.
8
Move it to the desired position by pressing
a/b/c/d, and then press ENTER.
9
Repeat the steps 6 and 7 until all desired
channels are sorted.
4
Press a/b to select “Analogue Setting”, and
then press ENTER.
5
Press a/b to select “Erase Programme”, and
then press ENTER.
6
Press c/d to select “Yes”, and then press
ENTER.
7
Press a/b/c/d to select the channel you
want to erase, and then press ENTER.
• A message screen pops up.
8
Press c/d to select “Yes”, and then press
ENTER to erase the selected programme. All
the subsequent programmes move up.
9
Repeat the steps 6 and 7 until all desired
channels are erased.
Sort menus
Erase programme menus
01 SAT.1
01 SAT.1
01 SAT.1
02 KABEL
03
04
05
01 SAT.1
02 PRO7
03 KABEL
04
05
06
07
08
09
10
06
07
08
09
10
11
12
13
14
15
11
12
13
14
15
16
17
18
19
20
16
17
18
19
20
Next
Next
02 PRO7
02 KABEL
01 SAT.1
01 SAT.1
02 KABEL
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
01 SAT.1
02 PRO7
03 KABEL
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Next
Next
02 KABEL
01 KABEL
01 SAT.1
02 KABEL
03
04
05
01 KABEL
02 SAT.1
03
04
05
06
07
08
09
10
06
07
08
09
10
11
12
13
14
15
11
12
13
14
15
16
17
18
19
20
16
17
18
19
20
Next
Next
25
32D33X_en_c.indd 25
2008-2-25 16:03:36
Watching TV
Useful viewing functions
Returning to the previously selected
channel
Muting the audio temporarily
Using Mute (e) on the remote control unit
e mutes the current sound output.
1
Press e.
• The sound is silenced.
• “M” is displayed while the mute function is on.
Mute
Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.
2
• Before 30 minutes, the volume level returns to the
previous setting.
Press A to toggle between the currently selected
input source and the previously selected one.
Press A to return to the previous page in TELETEXT
mode.
Freezing the image
Allows you to capture and freeze one frame from a
moving image that you are watching.
Press e again within 30 minutes to cancel the
mute.
NOTE
• Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOLk.
Outputting only audio
When listening to music from a music programme, you
can set the display off and enjoy audio only.
1
2
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Audio Only”, and then
press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
Press FREEZE.
• Captures one frame from a moving image.
Press FREEZE again to cancel the function.
NOTE
• The still image automatically goes out after 30 minutes.
Selected item
Description
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to “Off”.
26
32D33X_en_d.indd 26
2008-1-24 15:57:21
Watching TV
Switching the analogue audio format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
BBC1
BBC1
01
ATV
PAL
NICAM
B/G
CH A
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
PAL
BBC1
PAL
NICAM
01
PAL
B/G
STEREO
BBC1
ATV
PAL
01
B/G
MONO
Bilingual mode
BBC1
PAL
NICAM
01
B/G
CH A
BBC1
ATV
01
PAL
NICAM
B/G
CH B
BBC1
ATV
PAL
BBC1
01
ATV
01
B/G
MONO
PAL
NICAM
B/G
CH AB
01
B/G
CH AB
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
BBC1
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and
MONO.
ATV
B/G
CH B
BBC1
ATV
Stereo mode
ATV
01
ATV
ATV
PAL
01
B/G
MONO
NOTE
• “BBC1”, “Ø1” and “PAL” are tentative network name,
channel and colour system.
Switching the digital audio format
H If multi sound modes are received, each time you
press MPX the mode switches as follows.
(Example)
Audio (ENG) : STEREO
L/R
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
L
R
LR
Monaural mode
BBC1
ATV
01
PAL
NICAM
B/G
MONO
BBC1
ATV
PAL
Audio (ENG) : CH A
01
B/G
MONO
CH A
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
ATV
PAL
01
B/G
STEREO
BBC1
ATV
PAL
CH AB
Audio (ENG) : MONO
Stereo mode
BBC1
CH B
01
B/G
MONO
H Press c/d to select L or R sound when the
STEREO or DUAL MONO screen is displayed.
Audio (ENG) : STEREO
L/R
L
R
LR
NOTE
• The sound mode screen disappears in 6 seconds.
• Selectable items vary depending on the received
broadcasts.
27
32D33X_en_d.indd 27
2008-2-25 16:05:08
Watching TV
Password setting for the child lock
(for TV input mode)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Child Lock”, and then
press ENTER.
4
If you already set the password, enter it here.
Clearing the password
Allows you to clear your password.
1
Repeat steps 1 to 3 in Setting a password.
2
Enter the password.
3
Press a/b to select “Clear password”, and
then press ENTER.
4
Press c/d to select “Yes”, and then press
ENTER.
Change password
Clear password.
Clear password
Parental rating
5
Press a/b to select “Change password”, and
then press ENTER.
Change password
Enter your new password.
Clear password
Use 4 digits.
Parental rating
New Password
Reconfirm
6
Yes
No
NOTE
• As a precautionary measure, make a note of your
password and keep it in a familiar place. If you lose
or forget your password, initialise the TV to return all
settings except for the TV channel settings to factory
preset values. (See page 74.)
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Enter the 4-digit number as a password using
0 — 9.
Change password
Enter your new password.
Clear password
Use 4 digits.
Parental rating
New Password
Reconfirm
7
Enter the same 4-digit number as in step 6 to
confirm.
NOTE
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter
a password. (See page 24.) When you select a locked
channel, a password prompt message pops up. Press
RETURN to display the password input window.
28
32D33X_en_d.indd 28
2008-1-24 15:57:23
Watching TV
Parental Rate
Key Lock
This function allows TV channels to be restricted.
It prevents children from watching violent or sexual
scenes that may be considered inappropriate.
This function allows you to lock the buttons on the
TV or remote control in order to prohibit children from
changing the channel or volume.
1
Press MENU and the MENU screen displays.
Press a/b to select “Parental rating”, and
then press ENTER.
2
Press c/d to select “Option”.
Press a/b to select your desired rating, and
then press ENTER.
3
Press a/b to select “Key Lock”, and then
press ENTER.
4
Press a/b to select “RC Control Lock”
or “Button Control Lock”, and then press
ENTER.
1
Repeat steps 1 to 3 in Setting a password.
2
3
Selected item
Description
General and
above (G)
Content is not offensive to most viewers.
Parental
Guidance
and above
(PG)
Content is such that parents may
not want their children to view the
programme.
Mature and
above (M)
Mature Audience only. This programme
is specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
Selected item
Description
Off
Unlock the buttons.
RC Control
Lock
Lock all buttons on the remote control.
Button
Control Lock
Lock the buttons except the power
switch on the TV.
Mature Adult
and above
(MA)
Mature Adult only. This programme is
specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
NOTE
• You cannot set both “RC Control Lock” and “Button
Control Lock” at the same time.
Adult
Violence and
above (AV)
Not for children under age 15. Strong
elements of sex and/or violence.
H Cancelling the lock
Restricted
and above
(R)
Not for children under age 18. Strong
elements of sex and/or violence.
No Block (-)
Cancel the blocking.
Press the MENU on the TV and set to “Off” to cancel
the “RC Control Lock”.
Press the MENU on the remote control and set to “Off”
to cancel the “Button Control Lock”.
• Refer to page 17 for menu operation using MENU button
on the TV.
Programme Title Display
This function allows you to display programme
information on the screen including the title and airtime
by tuning a channel.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Programme Title
Display”, and then press ENTER.
4
Press c/d to select “Yes”, and then press
ENTER.
NOTE
• The Programme Title Display function is only available for
the DTV mode.
29
32D33X_en_d.indd 29
2008-1-24 15:57:23
Watching TV
Energy conservation settings
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
1
Auto power-off when there are no
operations performed
You can set the TV to automatically power off when no
TV operation is performed for more than 3 hours.
Press SLEEP.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power Control”.
3
Press a/b to select “No Operation Off”, and
then press ENTER.
4
Press a/b to select “30 min” or “3 hr”, and
then press ENTER.
• Remaining time displays when sleep timer has
been set.
Sleep timer: Remain 2hr. 00min.
2
Each time you press SLEEP, the remaining
time switches as shown below.
0hr. 30min.
Off
1hr. 00min.
2hr. 30min.
• Five minutes before the power shuts down, the
remaining time displays every minute.
1hr. 30min.
2hr. 00min.
NOTE
• The sleep timer indicator on the TV lights up when the time
has been set.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
Auto power-off after the end of broadcast
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals, such as the end of a broadcast
day.
NOTE
• “Disable” is the factory preset value.
Ecology
When set to “Yes”, The TV activates the following
power saving mode.
•
•
•
•
“OPC” set to “On” (Page 35)
“Standby Mode” set to “Mode 2” (Page 31)
“No Operation Off” set to “3 hr” (Page 30)
“No Signal Off” set to “Enable” (Page 30)
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power Control”.
1
Press MENU and the MENU screen displays.
3
Press a/b to select “Ecology”, and then
press ENTER.
2
Press c/d to select “Power Control”.
4
Press c/d to select “Yes”, and then press
ENTER.
3
Press a/b to select “No Signal Off”, and then
press ENTER.
4
Press c/d to select “Enable”, and then press
ENTER.
NOTE
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• “Disable” is the factory preset value.
• When a TV programme finishes, this function may not
operate.
30
32D33X_en_d.indd 30
2008-1-25 15:19:33
Watching TV
Reducing the start-up time
You can reduce the TV’s start-up time after the turning
on the power with the remote control unit.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Standby Mode”, and
then press ENTER.
4
Press c/d to select “Mode 1” or “Mode 2”,
and then press ENTER.
Selected item
Description
Mode 1
Starting the TV is quick from standby.
Mode 2
Power consumption is small during
standby.
5
Press MENU to exit.
31
32D33X_en_d.indd 31
2008-1-24 15:57:24
Watching TV
Picture size settings
Selecting the Wide Screen Signalling
(WSS) picture size automatically
WSS allows a television to switch automatically among
the different screen formats.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
Selecting the Wide Screen Signalling
(WSS) picture size manually
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “4:3 Mode”, and then
press ENTER.
4
Press c/d to select “Panorama” or “Normal”,
and then press ENTER.
WSS signal 4:3 screen
4:3 mode “Panorama”
3
Press a/b to select “WSS”, and then press
ENTER.
4
Press c/d to select “On” or “Off”, and then
press ENTER.
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
Selected item
4:3 mode “Normal”
Description
Panorama
Wide image without side bars
Normal
Normal range keeping 4:3 or 16:9 aspect
ratio
32
32D33X_en_d.indd 32
2008-1-24 15:57:24
Watching TV
Selecting the picture size manually
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
Auto Selection
If you set “WSS” and “4:3 Mode” in the Setup menu
on page 32, the optimum WIDE mode is automatically
chosen for every broadcast containing the WSS
information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup
menu to “On”. (See page 32.)
Press WIDE.
1
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
“4:3 Mode” menu
To set the type of the wide screen, select “Panorama”
or “Normal” in the 4:3 Mode menu. (See page 32.)
WIDE MODE
Normal
Zoom 14:9
4:3 Mode set to “Panorama”
Panorama
Full
Cinema 16:9
Cinema 14:9
4:3 Mode set to “Normal”
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Press WIDE or a/b while the WIDE MODE
menu displays on the screen.
2
• As you toggle down the options, each mode is
immediately reflected on the TV.
Selected item
Description
Normal
For 4:3 “standard” pictures. A side bar appears on each side.
Zoom 14:9
For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and
bottom with some programmes.
Panorama
In this mode the picture is progressively stretched toward each side of the screen.
Full
For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Underscan
Display with an Underscan image when receiving a 720p, 1080i and 1080p signal. Display with the HighDefinition image adjusted optimally. Noise may appear on the edge of the screen with some programmes.
Normal
Zoom 14:9
Panorama
Cinema 14:9
Cinema 16:9
Full
NOTE
• Some picture sizes may not be
displayable depending on the
input signal.
33
32D33X_en_d.indd 33
2008-3-6 11:42:57
Watching TV
Selecting a preset AV MODE
The AV MODE function enables you to select
appropriate settings for audio and video to account for
the system environment which can vary due to factors
like room brightness, type of programme watched or
the type of image input from external equipment.
Using AV MODE on the remote control unit
1
Press AV MODE.
2
Press AV MODE again before the mode
displayed on the screen disappears.
• Present AV MODE displays.
• The mode changes as shown below.
When the input source is TV, INPUT1 or 2 terminal
(Example)
AV Mode : STANDARD
AV Mode : MOVIE
AV Mode : DYNAMIC
AV Mode : GAME
AV Mode : DYNAMIC (FIXED)
AV Mode : USER (TV)
Selected item
Description
STANDARD
For a highly defined image in a normally
bright room
MOVIE
For a movie
GAME
Lowers image brightness for easier
viewing.
PC*
For PC. (Available only when inputting an
HDMI or RGB signal.)
USER
Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC
(FIXED)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
NOTE
• The item marked with * is available only when selecting
“INPUT3”, “INPUT4” or “INPUT5” from the INPUT SOURCE
menu.
When the input source is INPUT3, 4 or 5 terminal
(Example)
AV Mode : STANDARD
AV Mode : MOVIE
AV Mode : DYNAMIC
AV Mode : GAME
AV Mode : DYNAMIC (FIXED)
AV Mode : PC
AV Mode : USER (
)
34
32D33X_en_e.indd 34
2008-3-6 11:43:28
Watching TV
Manual picture settings
Selected item
Picture adjustment
2
Press MENU and the MENU screen displays.
Press c/d to select “Picture”.
MENU
[Picture]
Picture
Audio
Power Control
DYNAMIC
OPC
[Off]
Backlight
[+14]
–16
+16
Contrast
[+30]
0
+40
Brightness
[0]
–30
+30
Colour
[0]
–30
+30
Tint
[0]
–30
+30
Sharpness
[0]
–10
+10
dbutton
OPC
Sets whether or not the screen brightness
is automatically adjusted according to
the lighting condition in the room. (OPC
setting: See this page.)
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
You can adjust the picture to your preference.
Follow the steps to adjust the picture.
1
cbutton
Brightness
For less brightness
For more brightness
Colour
For less colour
intensity
For more colour
intensity
Tint
Skin tones become
purplish
Skin tones become
greenish
For more sharpness
Sharpness
For less sharpness
Advanced
For finer picture adjustments. (See page 36).
Reset
Resets all picture adjustment items to the
factory preset values.
H OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
Advanced
Reset
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
NOTE
• For resetting all adjustment items to factory preset values,
pressa/b to select “Reset”, press ENTER, press c/d to
select “Yes”, and then press ENTER.
• “Backlight” cannot be adjusted when “OPC” is set to “On”
or “On: Display”.
• Select “Advanced” and then press ENTER to set “Colour
Temp.”, “Film Mode”, “Active Contrast”, “3D-Y/C” or
“Monochrome” or “Range of OPC”. See page 36.
OPC indicator
Using OPC on the remote control unit
Press OPC to switch the OPC function on and off.
Using OPC on the menu screen
You can also set the menu screen.
Selected item
Description
On: Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On
Automatically adjusts
Off
The brightness is fixed at the value set in
“Backlight” (See this page).
OPC indicator
Light off
“Off” is selected in the OPC setting.
Lighted (Green) “On” or “On:Display” is selected in the
OPC setting.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
35
32D33X_en_e.indd 35
2008-2-25 16:06:44
Watching TV
Advanced picture settings
The advanced settings enable you to set the picture
adjustment in more detail. There are 6 options you can
choose from.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press ENTER.
4
Press a/b to select the desired menu, and
then press ENTER.
Colour Temp.
Film Mode
Active Contrast
3D-Y/C
Monochrome
High
H 3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item
Description
Standard
Normal adjustment
Fast
Set the optimum image quality for fastmoving images.
Slow
Set the optimum image quality for slowmoving images.
Off
No detecting
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Mid-High
Middle
Range of OPC
Mid-Low
H Monochrome
For viewing images in monochrome.
Low
H Range of OPC
5
Press a/b or c/d to select the desired level,
and then press ENTER.
H Colour Temp. (Colour temperature)
Adjusts the colour temperature to give the best white
image.
Selected item
High
Mid-High
Middle
Mid-Low
Low
Description
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of +16 and a minimum of
-16.
Selected item
Description
Max.
-15 through +16
Min.
-16 through +15
White with bluish tone
White with reddish tone
H Film Mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
film frame for high-definition picture quality.
NOTE
• This function is available only when the OPC setting is set
to On or On: Display.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
NOTE
• Film Mode is not selectable depending on the input signal
type.
H Active Contrast
Automatically adjusts the contrast of an image
according to the scene.
36
32D33X_en_e.indd 36
2008-1-24 15:57:42
Watching TV
Other picture settings
Game Play Time
DNR (Digital Noise Reduction)
Reduces noise on the screen and produces a clearer
video image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “DNR”, and then press
ENTER.
4
Press a/b to select the desired level, and
then press ENTER.
This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select “GAME” under “AV
Mode” for the input mode of the terminal connected to
the game console before starting the game.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Game Play Time”, and
then press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
Picture Noise Reduction
Off
High
Low
Selected item
On
The elapsed time is displayed every 30
minutes when you switch to GAME mode
in external input mode.
Off
No adjustment
Adjusting the image position
For adjusting a picture’s horizontal and vertical position.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Position”, and then
press ENTER.
4
Description
Press a/b to select “H-Pos.” or “V-Pos.”.
Display position adjustment
H-Pos.
[ 0]
H-Pos. adjustment
V-Pos.
[ 0]
V-Pos. adjustment
Reset
Selected item
Return to factory pre-settings
Description
H-Pos.
Centres the image by moving it to the left
or right.
V-Pos.
Centres the image by moving it up or
down.
5
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select “Reset”, and then press ENTER.
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or signals.
37
32D33X_en_f.indd 37
2008-1-25 15:21:35
Watching TV
Indicating time on the screen
H Time Display
H Time Format
This function allows you to display the clock time on
the lower right screen.
You can select the time format (either 24HR or AM/PM)
for the clock time.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Time Display” and then
press ENTER.
Time Display
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Time Display” and then
press ENTER.
4
Press a/b to select “Time Format” and then
press ENTER.
5
Press c/d to select the desired time format.
and then press ENTER.
Time Display
Selecting time format
Time Format
Displaying the clock On/Off
Time Format
24HR
On
On (half-hourly)
AM/PM
Displaying the clock
Display the clock half-hourly
Off
4
Press a/b to select “Time Display” and then
press ENTER.
5
Press a/b to select “On” or “On (half-hourly)”
and then press ENTER.
Selected item
Description
On
Display the clock time.
On (halfhourly)
Display the clock time in 30 minutes
increments.
Off
Hide the clock time.
38
32D33X_en_f.indd 38
2008-1-24 15:58:05
Watching TV
Audio adjustment
You can adjust the audio of the selected AV mode.
1
2
Press MENU and the MENU screen displays.
Press c/d to select “Audio”.
MENU
H Bass Enhancer
This function allows you to enjoy bass-enhanced
sound.
1
Repeat steps 1 to 2 in Audio Adjustment.
2
Press a/b to select “Bass Enhancer”, and
then press ENTER.
3
Press c/d to select “On”.
[Audio]
Audio
Power Control
DYNAMIC
Treble
[0]
–15
+15
Bass
[0]
–15
+15
Balance
[0]
L
R
Surround
[Off]
Selected item
Bass Enhancer
[Off]
Description
On
Bass Enhancer function is on.
Off
Outputs the normal sound.
Reset
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Selected item
cbutton
dbutton
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio
from the left speaker
Output Volume Select
Allows you to select what controls the audio output.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Output Volume Select”,
and then press ENTER.
4
Press c/d to select “Fixed” or “Variable”, and
then press ENTER.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
Audio output settings
Fixed
H Surround
When you set to “On”, you can enjoy surround sound,
the same as if you were in a movie theatre.
1
Repeat steps 1 to 2 in Audio Adjustment.
2
Press a/b to select “Surround”, and then
press ENTER.
3
Press c/d to select “On”.
Selected item
Description
On
Makes it possible to enjoy natural,
realistic surround sound.
Off
Outputs the normal sound.
Variable
Adjustable with remote
control
(No sound from the speakers)
Selected item
Description
Fixed
• Sound via speakers is adjusted with VOL
e/f on the remote control unit or the
TV.
• Sound via the MONITOR OUTPUT
terminal is not adjustable and constantly
outputs.
Variable
• Sound via the MONITOR OUTPUT
terminal is adjusted with VOL e/f on
the remote control unit or the TV.
• Sound via speakers is muted.
NOTE
• The “Audio” menu cannot be operated when headphones
are plugged in or when “Variable” is selected.
39
32D33X_en_f.indd 39
2008-3-11 9:20:19
Watching TV
Automatic Volume Adjustment
4
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
Press a/b to select your desired output
system, and then press ENTER.
Digital audio optical output
PCM
Dolby Digital
To stereo audio system
To multi-channel
Dolby Digital audio system
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Auto Volume”, and then
press ENTER.
PCM
The optical output format is normally in
PCM.
4
Press c/d to select “On”, and then press
ENTER.
Dolby Digital
Dolby Digital audio will be output when
there is a Dolby Digital audio signal. The
output will be in PCM when there is no
Dolby Digital audio signal.
Selected item
Clear Voice
This function emphasises speech against background
noise for greater intelligibility. It is not recommended for
music sources.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Clear Voice”, and then
press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM audio outputs from the
terminal.
Optical fibre cable
(commercially available)
To optical digital input of external audio
devices
Digital Audio Output
This function allows you to select your favourite audio
output system.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”, and then press
ENTER.
3
Press a/b to select “Digital Audio Output”,
and then press ENTER.
MENU
Description
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
[Option ... DigitaI Audio Output]
Option
AQUOS LINK Setup
DNR
Input Select
HDMI Audio Select
Output Volume Select
[Off]
[Auto]
[Digital]
[Fixed]
Auto Volume
[On]
Clear Voice
[Off]
Digital Audio Output
Audio Only
[PCM]
[Off]
40
32D33X_en_f.indd 40
2008-2-25 16:08:06
Watching TV
Programme Guide
Info
You can check the current schedule of DTV events
and view detailed information about current events.
1
2
Press GUIDE to display the programme guide
list.
While watching DTV you can check the extended
programme information on the screen using INFO on
the remote control.
Input info.
Press a/b to display your desired
programme, and then press ENTER.
Video : --
• When you press ENTER, the TV jumps to the
channel.
Age : -
Audio : STEREO
Optic. REC : OK
CH LIST
002
[DTV -TV]
ABC TV Sydney
6/19 [Mon] 9:29
9:23 – 9:29
Global Grover
002 ABC TV Sydney
• If there is more information, pressing a/b allows you to
go to the next page or return to the previous page.
Global Grover
003 SBS
004 FTV Guide
009 NINE DIGITAL
010 TEN DIGITAL
011 TEN Guide
012 TEN HD
020 ABC HDTV
Global Grover
021 ABC 2
ABC Asia Pacific News
022 ABC TV
Global Grover
030 SBS HD
031 SBS 2
41
32D33X_en_f.indd 41
2008-1-24 15:58:05
Watching TV
Favourite channel setting
4
This function allows you to program 4 favourite
channels, in 4 different categories. By setting the
favourite channels in advance, you can select your
favourite channels easily.
Using FAVOURITE CH on the remote control unit
1
Select the channel you want to register as a
favourite channel.
2
Press FAV.
3
Press a/b to select “Register”, and then
press ENTER.
4
Press a/b/c/d to select the position in the
category, and then press ENTER to register.
R
G
ATV
01
DTV
011
Y
Press c/d to select “Yes”, and then press
ENTER.
Yes
No
R
G
ATV
01
DTV
011
DTV
010
ATV
01
Y
B
B
DTV
010
Deleting a favourite channel
1
Press FAV and the favourite channel screen
displays.
2
Press a/b to select “1 Data Clear”, and then
press ENTER.
• To delete all the favourite channels, select “All
Data Clear”, and then skip to step 4.
3
Press a/b/c/d to select the position in the
category, and then press ENTER to register.
R
G
ATV
01
DTV
011
DTV
010
ATV
01
Y
B
42
32D33X_en_f.indd 42
2008-1-24 15:58:05
Watching TV
ATV (Analogue)/DTV/RADIO buttons
Use the following buttons on the remote control to
operate the menu.
When you watch the TV for the first time
When the TV powers on for the first time after
purchase, perform the auto installation.
ATV (Analogue TV)
You can run the auto installation to set channels
automatically.
1
To watch the analogue TV, select “Auto
Installation” from Setup menu. (See page 20.)
2
After setting the channels, you can select
a channel using CH r/s or 0—9 on the
remote control unit. (See page 21.)
DTV
When the TV accesses to DTV mode for the first time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
1
To watch DTV broadcasts, select “Digital
Search” from auto installation menu. (See page
11.)
2
After setting the channels, you can select
a channel using CH r/s or 0—9 on the
remote control unit. (See page 21.)
ATV: Press to switch to analogue mode. After
switching from DTV, radio or external input mode to
analogue mode, the TV jumps to the most recently
viewed analogue channel.
DTV: Press to switch to DTV mode. After switching
from analogue, radio or external input mode to DTV
mode, the TV jumps to the most recently viewed DTV
channel.
RADIO: Press to switch to radio mode. After switching
from DTV to radio mode, the TV jumps to the most
recently tuned radio channel.
43
32D33X_en_f.indd 43
2008-1-24 15:58:06
Watching TV
H Display Range Setup
EPG
What is an EPG?
An “EPG (Electronic Programme Guide)” is a
programme schedule, which is displayed on the TV
screen. The EPG is broadcasted together with DTV.
The TV screen shows the EPG when the viewer
presses EPG on the remote control, provided that
the TV is receiving the digital broadcasting signal. The
EPG enables you to search for a programme, do timer
setting, or view the programme schedule in detail.
EPG display settings
EPG (Electronic Programme Guide) is a programme
list that is displayed on the screen. With the EPG, you
can check the schedule of DTV/RADIO/DATA, view
detailed information about them, tune to an event
currently on-air and set a timer for future events.
1
Press MENU and the MENU screen displays.
The Display range setup allows you to select three
types of time spans for display on the screen.
Selected item
Mode1
(Wide Angle)
Display six hours of programme
information.
Mode2
(Zoom)
Display three hours of programme
information.
Mode3
(Vertical
Angle)
Change to the EPG display format with a
vertical time span.
H Genre Icon Setup
You can grey out or place a mark on desired genres
and smoothly search for programmes you frequently
watch.
Genre Icon List
Icon
2
Press c/d to select “Digital Setup”.
MENU
Description
Genre
Icon
Genre
Movie
Arts/Culture
News
Current Affairs
Entertainment
Education/
Information
Sport
Information
Children’s
Comedy
Music
Drama
[Digital Setup ... EPG Setup]
Digital Setup
Information
REC Picture Size
EPG Setup
Subtitle
3
Press a/b to select “EPG Setup”, and then
press ENTER.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
H EPG Setup (setting for receiving EPG
data)
EPG Setup must be selected to “YES” to enable
automatic capturing of data for all available channels
while the TV set is in standby mode. If EPG Setup is
set to “NO”, only EPG data for the current channel will
be updated.
Selecting EPG Setup to “YES” will result in higher
power consumption*.
Selecting EPG Setup to “NO” will save power
consumption.
NOTE
* Approximately 30W for 15-30 minutes (depending on
number of channels tuned) after power off from remote
control.
• EPG data will not update if the TV is turned off from the
mains power switch.
NOTE
• You can easily distinguish the Genre Icons by darkening or
lightening the icon’s shade.
Time Zone
This function enables you to select your local time
zone.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Digital Setup”.
3
Press a/b to select “Time Zone”, and then
press ENTER.
4
Press a/b to select the desired time zone
and then press ENTER.
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.
44
32D33X_en_f.indd 44
2008-4-4 15:47:45
Watching TV
Selecting a programme using EPG
Basic Operation
H Display the EPG screen
Press EPG.
EPG
Today
[DTV-TV]
002
ABC TV Sydney
9:23 – 9:29
[Tue]20
[Wed]21 [Thu]22 [Fri]23
10
9
2
TEN Digital
002
ABC TV Sydney
007
SBS
010
FTV Guide
012
TEN Digital
030
TEN Guide
061
TEN HD
062
ABC HDTV
340
ABC 2
351
ABC TV
994
SBS HD
995
SBS 2
996
SBS NEWS
997
SBS NEWS
998
D44
: Select
[Sat]24
[Sun]25 [Mon]26
6/19[Tue] 9:28
Global Grover
Pla...
Ba...
Pla...
Ba...
ABC…
Stat…
11
Arr...
Arr...
T…
12
Naked Scien…
Naked Scien…
W…
13
1
14
The…
The…
Catal…
Parliament Qu…
The…
The…
Catal…
Parliament Qu…
Se…
Play S…
G…
999
: Enter
ENTER
RETURN
: Back
EPG
: Exit R Programme Info.
3
G Search By Genre
4
Y
Search By Date
B Timer List
5
H Display the EPG screen
1 Press c/d to select the time span you want to search.
• Continue to press d to display programmes in the next time span.
2 Press a/b to select the desired programme.
H Close the EPG screen
• If a or b are displayed on the left of the services, continue to
press a/b to display next or previous screen.
Press EPG again.
Selecting a programme
3 Check programme information
1
Press a/b/c/d to select the programme
you want to check.
2
Press R.
Programme Information
EPG
Today
[DTV-TV]
[Tue]20
002
ABC TV Sydney
9:23 – 9:29
[Wed]21 [Thu]22 [Fri]23
R
002
007
SBS
010
FTV Guide
012
TEN Digital
030
TEN Guide
061
TEN HD
062
ABC HDTV
340
ABC 2
351
SBS NEWS
998
D44
999
: Select
3
ENTER
: Enter
RETURN
6/19[Tue] 9:28
Next
10
Pla...
Ba...
Pla...
Ba...
ABC…
: Back
B
Back to EPG
9
ABC TV Sydney
[Sun]25 [Mon]26
Trotro is a little donkey with a head full of ideas. He knows exactly what
he likes and doesn’t like. He’s a positive and engaging hero, with whom
young children will easily identify.
Programme Info.
TEN Digital
[Sat]24
Trotro
EPG
Stat…
11
Arr...
Arr...
T…
Naked Scien…
Naked Scien…
W…
12
13
14
The…
The…
Catal…
Parliament Qu…
The…
The…
Catal…
Parliament Qu…
Se…
Play S…
G…
: Exit
Press ENTER to tune to the selected
programme.
45
32D33X_en_f.indd 45
2008-1-24 15:58:07
Watching TV
4 Search a programme in a category
1
Press G.
2
Press a/b to select the desired genre, and
then press ENTER.
3
Press a/b to select a programme you want
to watch, and then press ENTER.
EPG
[DTV-TV]
Today
[Tue]20
[Wed]2
[Thu]22
[Fri]23
6/19[Mon] 10:57
[Sat]240 [Sun]25 [Mon]26
Search By Genre
Today [AM]
Today [PM]
[Tue] 20 AM
[Tue] 20 PM
Movie
ABC TV Sydney
002
Global Grover
[Mon] 19/06
10 : 50
News
ABC HDTV
020
Global Grover
[Mon] 19/06
10 : 50
11 : 10
Entertainment
ABC TV
022
Global Grover
[Mon] 19/06
11 : 05
11 : 20
-
11 : 05
Sport
Children’s
Music
Arts/Culture
Current Affairs
Education/Information
Information
Comedy
Drama
: Select
ENTER
: Enter
RETURN
: Back
EPG
R
: Exit
B
Back to EPG
Next
5 Search for a programme by date/time
1
Press Y.
2
Press c/d to select the desired time span
and then press ENTER.
EPG
Today
[DTV-TV]
[Tue]20
[Wed]21 [Thu]22 [Fri]23
Search by Time
6 – 12
: Select Time
ENTER
TEN Digital
002
ABC TV Sydney
007
SBS
010
FTV Guide
012
TEN Digital
030
TEN Guide
061
TEN HD
062
ABC HDTV
340
ABC 2
351
SBS 2
996
SBS NEWS
997
SBS NEWS
998
D44
999
3
: Enter
6/19[Tue] 9:28
RETURN
Back to EPG
10
Pla...
Ba...
Pla...
Ba...
ABC…
: Back
12 – 18
R
: Enter
9
ENTER
[Sun]25 [Mon]26
Today
0–6
: Select
[Sat]24
EPG
Stat…
G
11
Arr...
Arr...
T…
Naked Scien…
Naked Scien…
W…
Next
18 – 0
Enter
Y
+1 Week
12
B
Next
13
14
The…
The…
Catal…
Parliament Qu…
The…
The…
Catal…
Parliament Qu…
Se…
Play S…
G…
: Exit
Press a/b to select the desired programme,
and then press ENTER.
NOTE
• When you select a programme outside of the current time
span, the timer setting screen displays. (Page 47)
46
32D33X_en_g.indd 46
2008-1-24 15:58:23
Watching TV
Timer recording using EPG
Cancelling the timer recording
You can record TV programmes using data from the
EPG.
1
Press EPG.
2
Press a/b/c/d to select the programme
you want to record, and then press ENTER.
3
Press c/d to select the preferred timer
setting, and then press ENTER.
Watch
Record
No
1
Press EPG.
2
Press a/b/c/d to select the programme on
timer setup, and then press ENTER.
3
Press c/d to select “Cancel” , and then press
ENTER.
H Cancelling using B button on the remote
control
1
Press EPG.
2
Press B to display the timer recording screen.
3
Press a/b to select a programme with a set
timer recording you want to change, and then
press ENTER.
4
Press c/d to select “Cancel” and then press
ENTER.
• If you select “No”, the TV returns to the EPG screen.
H Selecting “Watch” in the timer setup
screen
This setting allows you to switch to a programme at a
set time.
1 Press c/d to select “Watch”, and then press
ENTER.
2 Press c/d to select “Yes”, and then press
ENTER.
• The selected TV programme is marked with an icon.
H Selecting “Record” in the timer setup
screen
This setting allows you to record a programme at a set
time.
1 Press c/d to select “Record”, and then press
ENTER.
2 Press c/d to select the preferred timer recording
type, and then press ENTER.
Selected item
Description
AQUOS
LINK
Record a programme at a set time when
a device compatible with AQUOS LINK is
connected.
VHS tape
Record a programme at a set time when
a device compatible with VHS tape is
connected.
NOTE
• Refer to pages 13 and 14 for connecting external devices.
• The selected TV programme is marked with an icon.
47
32D33X_en_g.indd 47
2008-1-24 15:58:24
Settings when using external devices
Settings when using HDMI output devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certified cable. When you want to output
the audio and picture from an HDMI output device on the TV, select “INPUT3” or “INPUT4” by switching the input
source.
Connecting an HDMI output device
HDMI output
device
HDMI cable (commercially available)
H HDMI (High-Definition Multimedia Interface)
terminal selection
1
2
To watch an HDMI equipment image, select
“INPUT3” or “INPUT4” using TV/VIDEO on the
remote control unit or TV/VIDEO on the TV.
4
Press a/b to select “HDMI Setup”, and then
press ENTER.
• The HDMI Setup can be selected only when
“INPUT3” or “INPUT4” is selected.
Press MENU and the MENU screen displays.
MENU
[Setup ... HDMI Auto View]
Setup
3
Press c/d to select “Setup”.
Option
Input Skip
Input Signal
1360m768
Input Label
Position
HDMI Auto View
[Enable]
Standby Mode
[Mode2]
Language
[English]
Reset
5
Press c/d to select the desired item, and
then press ENTER.
Selectable
items
Enable/
Disable
Description
Set whether or not to use WIDE MODE
based on signal recognition, including an
HDMI signal.
48
32D33X_en_g.indd 48
2008-1-24 15:58:25
Settings when using external devices
H HDMI Audio Select
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “HDMI Audio Select”,
and then press ENTER.
• The HDMI Audio Select can be selected only
when “INPUT3” is selected.
MENU
[Option ... HDMI Audio Select]
Option
AQUOS LINK
DNR
[Off]
Input Select
[Auto]
HDMI Audio Select
Output Volume Select
4
[Fixed]
Press c/d to select the desired setting, and
then press ENTER.
Selectable
items
Digital/
Analogue
Description
Select “Digital” for audio signal via the
HDMI terminal.
Select “Analogue” for audio signal via the
AUDIO jack.
NOTE
• When the equipment is connected with an HDMI cable,
items are automatically set and cannot be selected.
• “HDMI Audio Select” is only available for INPUT3.
49
32D33X_en_g.indd 49
2008-2-25 16:08:52
Settings when using external devices
Selecting the input source and
signal type
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
Using TV/VIDEO on the remote control unit or on
the TV
2
Press c/d to select “Option”.
TV/VIDEO allows you to choose from the available
input sources.
3
Press a/b to select “Input Select”, and then
press ENTER.
4
Press a/b to select a signal type you want to
set, and then press ENTER.
Selecting input source
Can use for selecting the input source.
Input source
1
Press TV/VIDEO on the remote control unit or
on the TV.
2
Press TV/VIDEO on the remote control unit or
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a/b.
Selectable item
INPUT 1
Auto, COMPONENT, S-VIDEO, VIDEO
INPUT 2
Auto, COMPONENT, VIDEO
NOTE
• If no colour image displays, try changing the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to “Auto”, the input terminal
where a cable is connected is automatically selected.
• When the signal type is set to “Auto” and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 1: COMPONENTs S-VIDEOs VIDEO
INPUT 2: COMPONENTs VIDEO
Selecting the size of the picture for recording
You can use this function to set the appropriate
picture size for recording a 16:9 format TV programme
broadcast via DTV.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Digital Setup”.
3
Press a/b to select “REC Picture Size”, and
then press ENTER.
4
Press c/d to select the desired picture size,
and then press ENTER.
Selected item
Description
16:9 TV
The TV displays the 16:9 format picture
with black bands at the top and bottom
of the screen.
4:3 TV
The picture gets compressed in the
horizontal direction.
50
32D33X_en_g.indd 50
2008-1-24 15:58:25
Settings when using external devices
Labelling input sources
You can assign each input source a label as you
prefer.
1
2
Press TV/VIDEO to select the desired input
source.
Press MENU and the MENU screen displays.
Skipping HDMI/RGB input
This setting allows you to skip the HDMI or RGB input
on the Input Selection Operation.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Input Skip”, and then
press ENTER.
4
Press a/b to select the Input (INPUT 3 to
INPUT 5) you wish to skip, and then press
ENTER.
INPUT 3 (HDMI)
3
Press c/d to select “Setup”.
4
Press a/b to select “Input Label”, and then
press ENTER.
5
Press a/b/c/d to select each character of
the new name for the input source, and press
ENTER.
Skip input selection of HDMI
INPUT 4 (HDMI)
INPUT 5 (RGB)
Yes
No
5
Press c/d to select “Yes”, and then press
ENTER.
6
Press MENU to exit.
DVD
A
K
U
0
B
L
V
1
C
M
W
2
D
N
X
3
E
O
Y
4
F
P
Z
5
G
Q
+
6
H I J CLEAR
R S T BACK
– . _
7 8 9 END
(Example)
6
Repeat the above until the name is fully spelt
out.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters select “END”, then press
ENTER to exit from the labelling menu.
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Colour System”, and
then press ENTER.
4
Press a/b to select a compatible video signal
system of your equipment, and then press
ENTER.
TV
INPUT1
INPUT2
DVD
INPUT4
Colour system settings
Auto
PAL
(Example)
SECAM
NOTE
• You cannot change labels if the input source is TV.
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL).
• “Colour System” is selectable only when inputting an
S-VIDEO or composite signal.
32D33X_en_g.indd 51
51
2008-1-24 15:58:26
AQUOS LINK
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you
can interactively operate compatible system devices (AV amplifier, DVD, Blu-ray Disc
device) using a single remote control.
NOTE
• AQUOS LINK-compatible AQUOS BD Player, 1 BIT THEATER RACK SYSTEM (AQUOS
AUDIO) and AQUOS Recorder are to be on sale after the release of this TV. (As of January
2008)
What you can do with AQUOS LINK
✔ One Touch Recording (DTV only)
You do not have to search for the remote control of your recording device. Press the
REC E or REC STOP H inside the flip cover to start/stop recording what you see
on the TV.
✔ One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image
from the HDMI source.
✔ Single remote control operation
The AQUOS LINK automatically recognises the connected HDMI device and you can
control the TV and the devices as if using a universal remote control.
✔ Operating Title list of external devices
You can also call up the external player’s Top menu or AQUOS BD Player’s/AQUOS
Recorder’s Title list provided that the devices support AQUOS LINK.
✔ Multiple control of HDMI devices
You can select which HDMI device to operate using OPTION.
✔ Controlling the 1 BIT THEATER RACK SYSTEM (AQUOS AUDIO)
You can adjust the volume and select the sound mode of the 1 BIT THEATER RACK
SYSTEM (AQUOS AUDIO).
NOTE
• Point the remote control toward the TV, not to the connected HDMI device.
• Video noise may occur depending on the type of HDMI-certified cable used. Make sure to use
a HDMI-certified cable.
• Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using
this system.
• These operations affect the HDMI device selected as the current input source. If the device
does not operate, turn on the device and select the appropriate input source using TV/VIDEO.
• When you insert/remove HDMI-certified cable or change connections, turn on all connected
HDMI devices before turning on the TV. Confirm that picture and audio are correctly output by
selecting “INPUT3” or “INPUT4” from the INPUT SOURCE menu.
52
32D33X_en_g.indd 52
2008-1-24 15:58:26
AQUOS LINK
AQUOS LINK connection
First connect the 1 BIT THEATER RACK SYSTEM (AQUOS AUDIO) or an AQUOS BD Player/AQUOS Recorder
that supports the HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, first turn on the power of the TV with all relevant
device’s power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting an AQUOS BD Player/AQUOS
Recorder via the AQUOS AUDIO
HDMIcertified
cable
Connecting an AQUOS BD
Player/AQUOS Recorder only
HDMI-certified
cable
Optical AUDIO cable
AQUOS BD Player/
AQUOS Recorder
AQUOS BD Player/
AQUOS Recorder
HDMI-certified cable
1 BIT THEATER
RACK SYSTEM
AQUOS LINK Setup
AQUOS LINK Auto power on
4
If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Press a/b to select “Auto Power On”, and
then press ENTER.
Auto Power On
Selecting Recorder
Using Genre Info.
On
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “AQUOS LINK Setup”,
and then press ENTER.
32D33X_en_g.indd 53
Off
5
Press c/d to select “On”, and then press
ENTER.
6
Press MENU to exit.
NOTE
• The factory default for this item is “Off”.
53
2008-2-25 16:09:21
AQUOS LINK
Selecting recorder
Operating an AQUOS LINK device
You can select a recorder for the recording from
several connected recorders.
1
2
Repeat steps 1 to 3 in AQUOS LINK Auto
power on.
Press a/b to select “Selecting Recorder”,
and then press ENTER.
AQUOS LINK allows you to operate the HDMIconnected device with one remote control.
Use the following procedure to start playback.
1
Press PLAY I to start playback of a title.
2
Press FWD J to fast forward.
Press REV G to reverse.
Press STOP H to stop.
Press POWER to turn the HDMI-connected
device on/off.
Auto Power On
• See page 43, section “Playback of titles using
AQUOS LINK” if you want to start playback using
the list of the titles of the AQUOS BD Player/
AQUOS Recorder.
Selecting Recorder
Using Genre Info.
INPUT3
[1. 0. 0. 0]
INPUT4
[2. 0. 0. 0]
3
Select the recorder, and then press ENTER.
4
Press MENU to exit.
Use the following procedure to start recording.
Check the following items before recording.
• Make sure the antenna cable is connected properly.
• Check if the recording media (HDD, DVD, etc.) has enough
capacity for recording a programme.
• Select the equipment for recording in Selecting Recorder.
NOTE
• If you have connected the 1 BIT THEATER RACK SYSTEM
(AQUOS AUDIO) between the TV and an AQUOS Recorder,
the input source’s indication changes from “INPUT3” to
“INPUT3 (Sub)” as it is shown below.
1
After you selected recording media (HDD,
DVD, etc.) in the menu, please make sure the
recording menu in the ready condition.
2
Press REC E to record a programme.
3
Press REC STOP H to stop recording.
Auto Power On
Selecting Recorder
Using Genre Info.
INPUT3
[1. 0. 0. 0]
INPUT3 (Sub)
[1. 1. 0. 0]
INPUT4
[2. 0. 0. 0]
Listening with the 1 BIT THEATER RACK
SYSTEM (AQUOS AUDIO)
You can opt to listen to the TV sound only from the 1
BIT THEATER RACK SYSTEM (AQUOS AUDIO).
Using Genre Info.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included in the digital broadcast.
1
Repeat steps 1 to 3 in AQUOS LINK Auto
power on.
2
Press a/b to select “Using Genre Info.”, and
then press ENTER.
3
Press c/d to select “On”, and then press
ENTER.
1
Press OPTION and the AQUOS LINK menu
screen displays.
2
Press a/b to select “By AQUOS AUDIO SP”,
and then press ENTER.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Model select
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the 1
BIT THEATER RACK SYSTEM (AQUOS AUDIO) is
audible.
• You can use VOL k/l and MUTE (e).
54
32D33X_en_h.indd 54
2008-1-31 12:37:21
AQUOS LINK
Listening with the AQUOS TV speaker
system
You can opt to listen to the TV sound only from the
AQUOS TV speaker system.
1
Press OPTION and the AQUOS LINK menu
screen displays.
2
Press a/b to select “By AQUOS SP”, and
then press ENTER.
Playback of titles using AQUOS LINK
This section explains how to play back a title in the
AQUOS BD Player/AQUOS Recorder.
Manually changing the AQUOS Audio
speaker system’s sound mode
1
2
Press OPTION and the AQUOS LINK menu
screen displays.
Press a/b to select “Sound mode change”.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
1
Select the appropriate external input.
2
Press OPTION and the AQUOS LINK menu
screen displays.
3
Press a/b to select “Top Menu/Title List”,
and then press ENTER.
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Model select
3
The sound mode changes every time you
press ENTER.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
• Refer to the operation manual of the AQUOS
audio speaker system for details.
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Model select
• The linked recorder now powers on and the TV
automatically selects the appropriate external
input source.
• The title list data from the connected AQUOS BD
Player/AQUOS Recorder displays.
4
Select the title with a/b/c/d, and then
press PLAY I to start playback.
55
32D33X_en_h.indd 55
2008-1-24 16:51:39
AQUOS LINK
Selecting media type for CEC-compatible
recorder
If your recorder has multiple storage media, select the
media type here.
1
Press OPTION and the AQUOS LINK menu
screen displays.
2
Press a/b to select “Media change”, and
then press ENTER.
HDMI device selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
1
Press OPTION and the AQUOS LINK menu
screen displays.
2
Press a/b to select “Model select”, and then
press ENTER. The HDMI device changes
every time you press ENTER.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Model select
3
Select the desired medium, such as DVD or
HDD. The media type changes every time you
press ENTER.
Recording via the AQUOS Recorder EPG
(only for recorders)
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control.
1
Press OPTION and the AQUOS LINK menu
screen displays.
2
Press a/b to select “Recorder EPG”, and
then press ENTER.
• The external input source switches and the
recorder’s EPG is displayed.
One Touch Recording (DTV only)
AQUOS LINK Menu
With this function, you can easily record a programme
you are watching on the TV onto AQUOS LINKcompatible equipment by simply pressing REC E.
Recorder EPG
Top Menu/Title List
Check the following items before recording.
By AQUOS AUDIO SP
• Make sure the antenna cable is connected properly.
• Check if the recording media (HDD, DVD, etc.) has enough
capacity for recording a programme.
• Select the equipment for recording in “Model select”.
By AQUOS SP
1
Press REC E to record a programme.
2
Press REC STOP H to stop recording.
• The selected AQUOS LINK-compatible device
automatically detects the programme you are
watching on the TV and starts recording.
Media change
Sound mode change
Model select
3
Select the programme to record.
• Refer to the operation manual of the recorder for
details.
NOTE
• One Touch Recording cannot be performed unless the
device you select in “Model select” is AQUOS LINK
compatible.
56
32D33X_en_h.indd 56
2008-1-24 16:51:39
Connecting a PC
Use the PC terminals to connect a PC.
HDMI Connection
PC
DVI/HDMI conversion cable
(Commercially available)
INPUT 3
INPUT 4
Ø 3.5 mm stereo minijack cable
PC
(Commercially available)
HDMI cable
(Commercially available)
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 62 for a list of PC signals compatible with the TV.
Analogue Connection
PC
RGB cable (Commercially available)
INPUT 5
Ø 3.5 mm stereo minijack cable (Commercially available)
PC
RGB/DVI conversion cable (Commercially available)
INPUT 5
Ø 3.5 mm stereo minijack cable (Commercially available)
Signal names for 15-pin mini D-sub connector
Pin No.
5
4
10
15
13
1
6
7
8
9
14
2
3
12
11
Signal name
R
G
B
Not connected
CSYNC
Pin No.
Signal name
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
Pin No.
Signal name
Not connected
SDA
HD
VD
SCL
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
57
32D33X_en_h.indd 57
2008-1-24 16:59:59
Connecting a PC
Displaying a PC image on the screen
Selecting the picture size
You can select the picture size as illustrated below.
1
Press WIDE.
• The WIDE MODE menu displays.
WIDE MODE
Full
Dot by Dot
(Example)
2
Press WIDE or a/b to select a desired item
on the menu.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
a
Picture size images.
Input Signal
1024g768
Input Signal
1360g768
Normal
Keeps the original
aspect ratio in a full
screen display.
Cinema
Full
For viewing wide
An image fully fills the
screen programs.
screen.
The top and bottom
of the image is slightly
cropped.
Full
Dot by Dot
Detects the resolution
of the signal and
displays an image
with the same
number of pixels on
the screen.
Dot by Dot
An image fully fills the Detects the resolution
screen.
of the signal and
displays an image
with the same
number of pixels on
the screen.
58
32D33X_en_h.indd 58
2008-3-6 11:54:02
Connecting a PC
Adjusting the PC image automatically
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/D-Sub conversion
cable, etc.
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
1
Press MENU and the MENU screen displays.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
2
3
Press a/b to select “Auto Sync.”, and then
press ENTER.
3
Press a/b to select “Fine Sync.”, and then
press ENTER.
4
Press c/d to select “Yes”, and then press
ENTER.
4
Press a/b to select a specific adjustment
item.
• Auto Sync. starts and “Adjusting the image”
display.
MENU
[Setup ... Auto Sync.]
H-Pos.
[ 90]
a
b
V-Pos.
[ 39]
a
b
Clock
[ 90]
a
b
Phase
[ 20]
a
b
Auto adjustment of image display parameters
Reset
Yes
No
Selected item
H-Pos.
Centres the image by moving it to the left
or right.
V-Pos.
Centres the image by moving it up or
down.
Clock
Adjusts when the image flickers with
vertical stripes.
Phase
Adjusts when characters have low
contrast or when the image flickers.
30%
5
•
•
•
•
•
Press MENU to exit.
NOTE
When Auto Sync. is successful, “Auto Sync completed
successfully” displays. If not, Auto Sync. failed.
Auto Sync. may fail even if “Auto Sync completed
successfully” displays.
Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
Auto Sync. can be executed only when inputting analogue
signals.
Description
5
Press c/d to adjust the item to your desired
position.
6
Press MENU to exit.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
• “Clock” and “Phase” in the “Fine Sync.” menu can be
adjusted only when inputting analogue signals.
59
32D33X_en_h.indd 59
2008-1-24 16:51:40
Connecting a PC
Input resolution settings
Selecting the input resolution
• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 x 768
1360 x 768
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Input Signal”, and then
press ENTER.
4
Press a/b to select the desired input signal
on the display, and then press ENTER.
Manually selecting the resolution
of the picture input signal
1024 x 768
1360 x 768
(Example)
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
60
32D33X_en_h.indd 60
2008-1-24 16:51:41
Connecting a PC
PC Control of the TV
• When a programme is set, the TV can be controlled from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and
settings can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the Din/D-sub RS-232C for the connections.
NOTE
• This operation system should be used by a person who is accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC to match the communications conditions of the TV. The
communications settings of the TV are as follows:
Baud rate:
9,600 bps
Data length:
8 bits
Parity bit:
None
Stop bit:
1 bit
Flow control:
None
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The TV operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the
next command.
Command format
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3
Command 4-digits
Parameter 4-digits
P4
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 — 9, space, ?
Return code
Parameter
Input the parameter values, aligning left, and fill with space(s) for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not correct, “ERR” returns. (Refer to “Response code format”.)
0
0
0
0
a
3
0
1
0
0
0
0
5
9
5
When “?” is input for some commands, the present setting value responds.
?
?
?
?
?
Response code format
Normal response
O
K
Problem response (communication error or incorrect command)
E
Return code (0DH)
R
R
Return code (0DH)
61
32D33X_en_i.indd 61
2008-1-24 16:52:02
Connecting a PC
PC compatibility chart
Resolution
Horizontal
Frequency
Vertical
Frequency
Analogue
(D-Sub)
Digital (HDMI) VESA Standard
VGA
640 g 480
31.5 kHz
60 kHz
✓
✓
SVGA
800 g 600
37.9 kHz
60 kHz
✓
✓
✓
✓
XGA
1024 g 768
48.4 kHz
60 kHz
✓
✓
✓
WXGA
1360 g 768
47.7 kHz
60 kHz
✓
✓
✓
SXGA
1280 g 1024
64.0 kHz
60 kHz
✓
✓
✓
SXGA+
1400 g 1050
65.3 kHz
60 kHz
✓
✓
NOTE
• This TV has only limited PC compatibility, correct operation can only be guaranteed if the video card conforms exactly to the
VESA 60Hz standard. Any variations from this standard will result in picture distortions.
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM
COMMAND
CONTROL
CONTENTS
PARAMETER
CONTROL ITEM
COMMAND
CONTROL
CONTENTS
PARAMETER
POWER SETTING
P O W R 0
_
_
_
POWER OFF (STANDBY)
VOLUME
V O L M *
INPUT SELECTION A
I
T G D _
_
_
_
INPUT SWITCHING (TOGGLE)
POSITION
H P O S
* * * _ H-POSITION (AV) (fnn—nn)
I
T V D _
_
_
_
TV (CHANNEL FIXED)
H P O S
* * * _ H-POSITION (PC) (fnn—nn)
I
D T V
_
_
_
_
DTV (CHANNEL FIXED)
V P O S
* * * _ V-POSITION (AV) (fnn—nn)
I
A V D *
_
_
_
INPUT1—5 (1—5)
V P O S
* * * _ V-POSITION (PC) (fnn—nn)
CHANNEL
D C C H *
* _ _ TV DIRECT CHANNEL (1—99)
C L C K
* * * _ CLOCK (0—180)
C H U P _
_
_
_
CHANNEL UP
P H S E
* * _ _ PHASE (0—40)
C H D W _
_
_
_
CHANNEL DOWN
*
*
*
_
D T U P _
_
_
D T D W _
_
I
N P 1 0
I
W I
D E 0
_
_
_
TOGGLE
DTV DIRECT CHANNEL (1—999)
W I
D E 1
_
_
_
NORMAL
_
DTV CHANNEL UP
W I
D E 2
_
_
_
ZOOM 14:9
_
_
DTV CHANNEL DOWN
W I
D E 3
_
_
_
PANORAMA
_
_
_
INPUT1 (Auto)
W I
D E 4
_
_
_
FULL
N P 1 1
_
_
_
INPUT1 (COMPONENT)
W I
D E 5
_
_
_
CINEMA 16:9
I
N P 1 2
_
_
_
INPUT1 (S-VIDEO)
W I
D E 6
_
_
_
CINEMA 14:9
I
N P 1 3
_
_
_
INPUT1 (VIDEO)
W I
D E 7
_
_
_
UNDERSCAN
I
N P 2 0
_
_
_
INPUT2 (Auto)
M U T E 0
_
_
_
TOGGLE
I
N P 2 1
_
_
_
INPUT2 (COMPONENT)
M U T E 1
_
_
_
MUTE ON
I
N P 2 3
_
_
_
INPUT2 (VIDEO)
M U T E 2
_
_
_
MUTE OFF
A V M D 0
_
_
_
TOGGLE
A C S U 0
_
_
_
SURROUND TOGGLE
A V M D 1
_
_
_
STANDARD
A C S U 1
_
_
_
SURROUND ON
A V M D 2
_
_
_
MOVIE
A C S U 2
_
_
_
SURROUND OFF
A V M D 3
_
_
_
GAME
AUDIO CHANGE
A C H A _
_
_
_
TOGGLE
A V M D 4
_
_
_
USER
SLEEP TIMER
O F T M 0
_
_ _
OFF
A V M D 5
_
_
DYNAMIC (FIXED)
O F T M 1
_
_
_
SLEEP TIMER 30 MIN
A V M D 6
_
_
DYNAMIC
O F T M 2
_
_
_
SLEEP TIMER 1 HOUR
A V M D 7
_
_
PC
O F T M 3
_
_
_
SLEEP TIMER 1 HOUR 30 MIN
O F T M 4
_
_
_
SLEEP TIMER 2 HOUR
O F T M 5
_
_
_
SLEEP TIMER 2 HOUR 30 MIN
T E X T 0
_
_
_
TEXT OFF
T E X T 1
_
_
_
TEXT ON (TOGGLE)
*
*
*
_
DIRECT PAGE JUMP (100—899)
D T V D
INPUT SELECTION B
AV MODE
SELECTION
* _ _ VOLUME (0—60)
NOTE
• If an underbar (_) appears in the parameter column, enter a
space.
• If an asterisk (*) appears, enter a value in the range
indicated in brackets under CONTROL CONTENTS.
WIDE MODE
MUTE
SURROUND
TEXT
D C P G
62
32D33X_en_i.indd 62
2008-3-6 11:44:34
Teletext function
About Teletext
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV
network, and decodes them into graphical format for
viewing. News, weather reports, sports information,
stock exchange prices and programme previews are
among the many services available.
TELETEXT
Teletext mode
Teletext is turned on/off with m on the remote control
unit. You can operate your TV in Teletext mode directly
by inputting commands with the remote control unit.
TELETEXT
When viewing the Teletext information
• Press CHr to increase the page number.
• Press CHs to decrease the page number.
NOTE
• When you turn TELETEXT on and change a Teletext page
right after changing channels, the relevant page may not
be displayed until the TV finishes reading all the Teletext
information.
Button functions
Colour (Red/Green/Yellow/Blue):
You can select a group or block of pages displayed
in the coloured brackets at the bottom of the screen
by pressing the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
TELETEXT
Red
Turning on and off Teletext
1
Select a TV channel or external input source
providing the Teletext programme.
2
Press m to display the Teletext.
Green
Yellow
Blue
0 — 9:
Directly select any page from 100 to 899 by using 0 — 9.
v (Top/Bottom/Full):
Each time you press v, the TELETEXT image
switches as shown below.
Full (Displays in full screen)
Top (Displays in the upper half of the screen)
3
Press m again to display the Teletext on
the right screen and normal image on the left
screen.
• Each time you press m, the screen switches as
shown upper right.
• If you select a programme with no Teletext signal,
“No Teletext available.” is displayed.
Bottom (Displays in the lower half of the screen)
k (Reveal hidden for TELETEXT):
To reveal hidden information such as an answer to a
quiz, press k.
• Press k again to hide the information.
3 (Hold):
To stop updating Teletext pages automatically, press 3.
• Press 3 again to release the hold mode.
63
32D33X_en_i.indd 63
2008-1-24 16:52:04
Teletext function
Teletext language setting
If Teletext information does not display correctly,
perform the procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages
listed below.
Displaying Subpages
You can display subpages as they are transmitted.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Text Language”, and
then press ENTER.
1
4
Press a/b to select receivable teletext
broadcasting language in your country, and
then press ENTER.
2
MENU
Press m to display Teletext.
Press 1 to display the subpage as shown
below.
Subpage screen
[Setup ... Text Language]
Teletext language settings
–
+
West Europe
East Europe
3
Greek/Turkish
• 0 — 9 directly selects the desired subpage.
Cyrillic
• West Europe — English, French, Scandinavian,
Czech, German, Spanish, Italian
Select the desired subpage by using CH r/s,
Red or Green.
4
Press 1 to exit the subpage screen.
• East Europe — Polish, French, Scandinavian,
Czech, German, Slovenian/Croatian, Italian,
Rumanian
• Greek/Turkish — English, French, Scandinavian,
Turkish, German, Spanish, Italian, Greek
• Cyrillic — English, Russian, Estonian, Czech,
German, Spanish, Ukrainian, Lettish
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
64
32D33X_en_i.indd 64
2008-2-25 16:10:41
Teletext function
Time display
You can display the time information included in the
Teletext broadcast.
1
Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)
2
Press DISPLAY. The channel display will
appear on the display.
3
Press DISPLAY again. The channel display
about three seconds on the screen. Time
information will continuosly display on the
lower right of the screen.
4
Even when you change the TV channel, you
can display the time information with steps 2
to 3 above.
NOTE
• The time display cannot be stored once the power is turned
off. When you turn on the power, perform steps 1 to 4 again.
• If acquired successfully the time information will appear in
the upper-right corner of the screen by pressing MENU.
65
32D33X_en_i.indd 65
2008-3-6 11:45:02
Teletext function
H Selecting the Language
Displaying Subtitles
You can display subtitles as they are transmitted.
1
Press [ to display the subtitle.
2
Press [ to exit the subtitle screen.
• Subtitle is updated by information sent by the
broadcasting station.
NOTE
• Subtitle will not be displayed when the service does not
contain subtitle information.
Switching subtitle languages (DVB
Subtitle)
E Switching subtitle languages
Each time you press [ on the remote control, the
subtitle switches.
Off
1st Language
••••••
2nd Language
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Digital Setup”.
3
Press a/b to select “Subtitle”, and then press
ENTER.
4
Press a/b to select “1st Language” or “2nd
Language”, and then press ENTER.
5
Press a/b to select the desired language,
and then press ENTER.
H Displaying subtitles for the hearing
impaired
You can display subtitles for the hearing impaired in
the Teletext broadcast.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Digital Setup”.
3
Press a/b to select “Subtitle”, and then press
ENTER.
4
Press a/b to select “For hearing impaired”,
and then press ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
“For hearing impaired” to “Yes”
• Subtitles for the hearing impaired have priority over
the above subtitle setting (“1st Language” and “2nd
Language”).
EXAMPLE
1st Language
(For hearing impaired)
2nd Language
NOTE
• Subtitle will not be displayed when the service does not
contain subtitle information.
66
32D33X_en_i.indd 66
2008-3-6 11:45:03
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem
Solution
• No power.
• Check if you pressed POWER on the remote control unit. (See page 16.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected? (See page 10.)
• Has the power been turned on? (See page 16.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
•
•
•
•
• Picture is cut off.
• Is the image position correct? (See page 37.)
• Are screen mode adjustments such as picture size made correctly? (See pages 32,
33 and 58.)
• Strange colour, light colour, or
dark, or colour misalignment.
•
•
•
•
•
• Power is suddenly turned off.
• The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the power control setting. (See page 30.)
• Is the sleep timer set? (See page 30.)
• No picture.
• Is the connection to external equipment correct? (See pages 13, 14, 48 and 57.)
• Has the input signal setup been performed correctly after connection? (See page
60.)
• Is the correct input selected? (See page 50.)
• Is the picture adjustment correct? (See pages 35 to 37.)
• Is the antenna connected properly? (See page 10.)
• Is “On” selected in “Audio Only”? (See page 26.)
• No sound.
• Is the volume too low? (See page 21.)
• Make sure that headphones are not connected. (See page 8.)
• The TV sometimes make a
cracking noise.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
Are batteries inserted with polarity (e, f) aligned? (See page 15.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light shining on the remote control sensor?
Adjust the picture tone. (See pages 35 to 37.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 23 and 51.)
Check the input signal setting. (See page 60.)
Check the HDMI Setup setting. (See page 48.)
Troubleshooting-Digital broadcasting
The error message about reception of broadcast
The example of an error message
displayed on a screen
Error code
Possible Solution
• Failed to receive broadcast.
E202
• Check the antenna cable. Check that the antenna is correctly
setup.
• No broadcast now.
E203
• Check the broadcast time in the program guide.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
67
32D33X_en_j.indd 67
2008-2-25 16:11:15
Appendix
Error messages about recording using AQUOS LINK
The example of an error message
displayed on a screen
Error code
Failed to record
Cannot record the broadcast.
S05
Failed to record
Cannot record the broadcast.
S06
Failed to record
Cannot record the broadcast.
S07
Failed to record
S09
Failed to record
S10
Failed to record
S11
Failed to record
S12
Failed to record
Cannot record the programme.
S13
Failed to record
Cannot record the programme.
S14
Failed to record
No record media available.
S16
Failed to record
Cannot record while playback.
S17
Failed to record
Cannot record while recording other
programme.
S18
Failed to record
No record media available.
S19
Failed to record
Cannot record while not receiving
broadcast.
S20
Failed to record
No record media available.
S21
Failed to record
No recordable memory available.
S22
Failed to record
Age limitation is set.
S23
Failed to record
Cannot record with the recorder.
S31
Possible Solution
Check the content (broadcast or programme)
or the recording medium such as HDD or DVD.
Either the content or the recording medium may
be incompatible.
This network cannot be recorded.
Use the recording function of your recording
device, not the AQUOS LINK function.
Use the recording function of your recording
device, not the AQUOS LINK function.
Check the content (broadcast or programme).
It may be incompatible.
Check the recording medium.
Stop playback and set up the recording again.
During recording, another recording is not possible.
Check the recording medium.
Writing to the medium is prohibited.
Please check if the settings are properly set.
Broadcasts are not receivable.
Recording to the medium is not possible. Check
the recording medium.
Check the capacity of the recording medium.
Deactivate the child lock and set up the
recording again.
Check your recording device.
68
32D33X_en_j.indd 68
2008-1-24 16:52:23
Appendix
Reset
Information
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
Message List
When a new broadcast station is detected, the
message is updated in the “Message List” of the
“Information” menu.
Receiver Report
Display reports regarding failures and changes for
timer settings.
3
Press a/b to select “Reset”, and then press
ENTER.
4
If you have already set the password, enter it
here.
Identification
You can check the current version of the software on
the screen.
• “Return to factory pre-settings” displays on the
screen.
5
Press c/d to select “Yes”, and then press
ENTER.
• “Now, TV will restart automatically. OK?” displays
on the screen.
6
Press c/d to select “Yes”, and then press
ENTER.
• “Now initialising...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
Now initialising...
69
32D33X_en_j.indd 69
2008-1-24 16:52:23
Appendix
Specifications
Model
LC-32D33X
LC-37D33X
LCD panel
32o (800 mm) Advanced Super View &
BLACK TFT LCD
37o (940 mm) Advanced Super View &
BLACK TFT LCD
Resolution
1,049,088 pixels (1366 g 768)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1
Item
TV-Standard
Receiving
Channel
VHF/UHF
44.25—863.25 MHz
CATV
S1—S41ch (including Hyperband)
TV-Tuning System
Auto Preset 99 ch
STEREO/BILINGUAL
NICAM: B/G, I, D/K A2 stereo: B/G
Brightness
450 cd/m2 (at AV MODE Dynamic position)
Backlight life
60,000 hours (at Backlight Standard position)
Viewing angles
H : 176º V : 176º
Audio amplifier
10W g 2
Speakers
10 g 4 cm 2pcs
Terminals
Rear
15 g 4 cm 2pcs
Antenna input
UHF/VHF 75 q DIN type
INPUT 1
VIDEO in, AUDIO in, S-VIDEO in,
COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
INPUT 2
VIDEO in, AUDIO in,
COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
INPUT 3
HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz), AUDIO in (Ø 3.5 mm jack)
INPUT 4
HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz)
INPUT 5 (PC input) 15 pin mini D-sub, AUDIO in (Ø 3.5 mm jack)
MONITOR OUT
VIDEO out, AUDIO out
RS-232C
9 pin D-sub male connector
DIGITAL AUDIO OUTPUT Optical Digital Audio output
OSD language
English/Simplified Chinese/Traditional Chinese/Arabic
Power Requirement
AC 110—240 V, 50/60 Hz
Power Consumption
152 W (0.7 W Standby)
178 W (0.7 W Standby)
without stand
11 kg
14 kg
with stand
13 kg
16 kg
Weight
Operating Temperature
0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Optional accessory
The listed optional accessory is available for the LCD colour
TV. Please purchase it at your nearest shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
Part name
Model number
Wall mount bracket
(for LC-32D33X/
LC-37D33X)
AN-37AG5
70
32D33X_en_j.indd 70
2008-3-6 11:45:35
Appendix
Dimensional drawings
Unit: mm
LC-32D33X
402
74
95
776
395.9
55
335
523
578
701.5
230
110
200
200
71
32D33X_en_j.indd 71
2008-1-24 16:52:23
Appendix
Dimensional drawings
Unit: mm
LC-37D33X
402
71
904
96
463.8
55
370
585
640
824.4
230
100
200
200
72
32D33X_en_j.indd 72
2008-1-24 16:52:23
Appendix
Mounting the TV on the wall
Removing the stand
For wall mounting with the optional bracket, remove the stand.
Before detaching/attaching the stand
•
•
•
•
Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
Remove all terminal covers and connected cables.
Lay the TV down on cushioning (such as a blanket) over a table.
Make sure two or more people perform the operation.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
1
Hex key
2
Stand post
Unfasten the four screws used to secure the stand in
place.
1 Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
2 Remove the stand post from the stand base and
attach it to the TV.
NOTE
• To attach the stand, perform the above steps in reverse order.
Handling and precautions with the wall-mounted TV
• You can mount the TV on the wall using the optional AN-37AG5 bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on the wall only with the AN-37AG5 (SHARP) wall mount bracket. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service personnel about using an optional AN-37AG5 bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-37AG5 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting
Angular mounting
About setting the TV angle
0
0/5/1
/15/20°
AN-37AG5
NOTE
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, first remove the cover at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
32D33X_en_j.indd 73
73
2008-1-24 16:52:24
Appendix
Wall Mounting
1
Mark the monitor’s outline by placing tape at four points on the wall where the LCD-TV’s four
corners’ will lie when it is installed.
• When you mark the monitor’s outline on the wall, make sure that the vertical and horizontal lines are made accurate
to the TV’s dimension.
• Use adhesive tape that will not leave permanent marks.
2
Make diagonal lines from the four corners and mark their intersecting point.
3
Mount the bracket on the wall by positioning the bracket’s mark that indicates the display’s
centre onto the intersecting point.
• Diagonally stretch string and mark the intersecting point in a way that no permanent marks will be left on the wall.
• The following measurement figures are rough estimates. The figures differ according to the location where you attach
the TV.
4
1 Remove the screws from the stand.
2 Attach the bracket to the LCD-TV.
3 When adjusting the bracket’s angle, adjust it before installing the TV on the wall.
• The adjusting angles of AN-37AG5 are 0°, 5°, 10°, 15° and 20°.
4 Lift the TV, remove it from the stand and attach it to the bracket.
• Attach the TV by aligning the monitor’s four corners with the wall markings.
• When you adjust the TV’s angle, make sure to remove the monitor from the wall.
5
Remove the tape and the string from the wall.
NOTE
• The above description is for reference. Please mount the TV in a way which properly suits the location.
LC-32D33X
*57
When using wall mount bracket AN-37AG5
*412
313
175
*54
56
70
344
110
200
123
On the wall bracket of
AN-37AG5, there is a
letter ‘A’ indicating the
center point of the TV
monitor.
123
20°
200
776
54
523
412
57
*Every time the attaching point is moved,
this figure changes by 50 mm.
wall markings
tape
294
dimensional markings
74
32D33X_en_j.indd 74
2008-3-12 8:13:08
Appendix
LC-37D33X
When using wall mount bracket AN-37AG5
200
412
344
95
79
81
100
200
160
160
94
20°
On the wall bracket of
AN-37AG5, there is a
letter ‘A’ indicating the
center point of the TV
monitor.
330
175
79
585
412
94
904
wall markings
tape
294
dimensional markings
75
32D33X_en_j.indd 75
2008-3-12 8:13:10
Appendix
CLEARING THE PASSWORD
If you forget your password, set a new password using the following procedure.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Child Lock”, and then press ENTER.
4
The password input screen displays.
5
If you enter “3001” using 0 — 9, the “Child Lock” setting menu will be displayed.
6
Enter the 4-digit number as a password using 0 — 9. (See page 28.)
The new password is now set.
The Password is
.
NOTE
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
76
32D33X_en_j.indd 76
2008-3-11 9:26:06
Appendix
Information on the software license for this product
Software composition
The software included in this product is comprised of various software components whose individual copyrights are held by
SHARP or by third parties.
Software developed by SHARP and open source software
The copyrights for the software components and various relevant documents included with this product that were developed
or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant
laws. This product also makes use of freely distributed software and software components whose copyrights are held by
third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser
General Public License (hereafter LGPL) or other license agreement.
Obtaining source code
Some of the open source software licensors require the distributor to provide the source code with the executable software
components. GPL and LGPL include similar requirements. For information on obtaining the source code for the open source
software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website:
http://www.sharp.net.au/
We are unable to answer any questions about the source code for the open source software. The source code for the
software components whose copyrights are held by SHARP is not distributed.
Acknowledgements
The following open source software components are included in this product:
• linux kernel • modutils • glibc • zlib • libpng
77
32D33X_en_j.indd 77
2008-3-11 9:26:06
Memo
78
32D33X_en_j.indd 78
2008-3-11 9:26:06
Memo
79
32D33X_en_j.indd 79
2008-3-11 9:26:07
Memo
80
32D33X_en_j.indd 80
2008-3-11 9:26:07
32D33X_Cover2.indd 1
12/26/2007 08:42:59
Printed on post-consumer recycled paper.
32D33X_Cover.indd 2
Printed in Malaysia
TINS-D484WJZZ
08P04-MA-NP
2008-3-6 11:41:55
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement