European Touch | Pedicure Spa | Specifications | European Touch Pedicure Spa Specifications

EUROPEAN TOUCH - LIMITED CONDITIONAL* WARRANTY
European Touch Holdings, Inc. ("European Touch") conditionally warrants your pedicure spa (the
"Pedicure Spa") in accordance with the terms and conditions set forth below for a period of one (1)
year commencing on the original date of shipment of the Pedicure Spa to you. The warranty only
applies to the Pedicure Spa's original end-user owner or customer (the "Customer"). This
Conditional Warranty is non-transferable and replaces any warranties previously published by
European Touch.
If examination of the Pedicure Spa by European Touch during the applicable warranty period shows it
to have a defect in material or workmanship, European Touch will, at its option, repair or replace the
defective component or part thereof. Further, European Touch may, at its discretion, replace a
defective component or part with a refurbished component or part, or may replace the Pedicure Spa
with a refurbished pedicure spa. If European Touch elects to replace the Pedicure Spa, the
replacement pedicure spa must be comparable in style and size to the original Pedicure Spa. The
Customer shall bear all charges incurred for the shipment to it of replacement components or parts,
or a replacement pedicure spa, and the cost of all labor incurred in repairing defects in the Pedicure
Spa or repairing or replacing any of its defective components or parts.
The foregoing limited warranty does not apply:
• To the Pedicure Spa, or any components or parts thereof, if subjected to misuse or neglect or
if accidentally or intentionally damaged.
• To the Pedicure Spa, or any components or part, if altered or modified in any way.
• To any expenses incurred by the Customer or any third party, including labor or material,
during investigation, removal or reinstallation of the Pedicure Spa or any defective components
or parts.
• To any damage to or impairment of the Pedicure Spa, or any components or parts thereof,
caused by any casualty, including without limitation, accident, fire, wind, floods, acts of nature
or attempted theft.
• To any workmanship of a fabricator (other than European Touch) or installer of the Pedicure
Spa.
• If damage to pump parts and/or motor parts is due to obstructed plumbing.
• If the Pedicure Spa is removed from its place of initial installation.
• To staining, fading, or discoloration of any portion of the Pedicure Spa caused by water
additives or improper water treatment.
• To staining, fading or discoloration of the Pedicure Spa's upholstered seat, armrests or
footrests.
• To malfunctions or damage caused by improper installation of the Pedicure Spa, including, but
not limited to, failure to meet local, state, or local plumbing, electrical and building codes.
• To damage resulting from a person standing in the Pedicure Spa's basin or other similar stress
to the basin.
• To freight damage.
• To damage incurred to the Pedicure Spa while in possession of any party other than European
Touch.
This forgoing conditional limited warranty is also conditional upon:
• The Pedicure Spa being installed by a licensed professional in accordance with European
Touch's installation instructions.
• The proper use of cleaning and sanitizing solutions in accordance with the manufacturer’s
instructions, or state board. It must be noted that repeated use of concentrated sodium
hypochlorite solutions (chlorine beach), concentrated ether solutions, or acetone will damage
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 2 of 20
•
•
•
chrome and plumbing components and will void the limited warranty on those parts. European
Touch recommends that you thoroughly read labels and use sanitizing products void of these
chemicals.
Use of this pedicure spa for functions it was not created for, including, but not limited to, ionic
detox or any process that operates by reverse electroplating; this use will destroy plated parts
and void the warranty.
Shipment, if requested, to European Touch of Pedicure Spa parts or components thought to be
defective. Parts or components may only be returned if authorized in advance by European
Touch. All returns must be freight prepaid.
Determination by European Touch, in its reasonable discretion, that there exists a defect in
material or workmanship.
Repair or replacement of any part or component under this Limited Warranty, or furnishing a
replacement pedicure spa, shall not extend the duration of the warranty with respect to such repaired
or replaced part beyond the stated warranty period. When a part or component is replaced, it will be
under warranty for 90 days, or for the remaining life of the original warranty, whichever period is
greater.
Customer agrees by using the Pedicure Spa that
• THE OBLIGATION OF EUROPEAN TOUCH SHALL NOT EXTEND TO INDIRECT OR
CONSEQUENTIAL DAMAGES OR INJURY WHICH MAY RESULT FROM SUCH USE
• the obligations of European Touch are limited to those set forth herein
• this warranty is limited to the original owner/end-user and is non-transferable
• European Touch shall not be liable for any other obligations or liabilities, including, but not
limited to: obligations or liabilities arising out of breach of contract or warranty, negligence, or
other tort or any theory of strict liability with respect to the Pedicure Spa or parts or
components thereof or any acts or omissions of European Touch
• Any assistance European Touch provides to the Customer outside of terms, limitations, or
exclusions of this limited warranty will not constitute a waiver of any of the foregoing terms,
limitations, or exclusions, nor will such assistance extend or revive the warranty.
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESSED OR
IMPLIED, AND ALL SUCH OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY DISCLAIMED AND EXCLUDED FROM THIS LIMITED WARRANTY. NO DEALER OR
OTHER PERSON HAS ANY AUTHORITY TO BIND EUROPEAN TOUCH TO CHANGES OR
ADDITIONS TO THIS WARRANTY OR ITS PRODUCTS. ACCORDINGLY, EUROPEAN TOUCH IS
NOT RESPONSIBLE FOR ANY SUCH OUTSIDE WARRANTIES OR REPRESENTATIONS.
IN NO EVENT SHALL EUROPEAN TOUCH BE LIABLE IN ANY WAY FOR ANY
CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OF ANY NATURE WHATSOEVER,
OR FOR ANY AMOUNTS IN EXCESS OF THE SELLING PRICE OF THE PEDICURE SPA OR
ANY COMPONENTS OR PARTS THEREOF FOUND TO BE DEFECTIVE. THIS LIMITED
WARRANTY GIVES THE CUSTOMER SPECIFIC LEGAL RIGHTS. THE CUSTOMER MAY ALSO
HAVE OTHER RIGHTS WHICH MAY VARY BY EACH JURISDICTION.
Should your Pedicure Spa require service due to a defect or malfunction, please contact:
European Touch – Technical Support
800.626.6912 | 414.357.7016 | f: 414.357.6360
email: service@europeantouch.com
website: www.europeantouch.com
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 3 of 20
OWNERS MANUAL For
Omni Spa
IMPORTANT INFORMATION
Serial Number:
Work Order Number:
Installed by:
Installation Date:
The serial number and work order number are located above
the water connections at the rear of the unit.
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 4 of 20
TABLE OF CONTENTS
EUROPEAN TOUCH - LIMITED CONDITIONAL* WARRANTY ................................................................ 2
IMPORTANT INFORMATION ............................................................................................................. 4
TABLE OF CONTENTS ................................................................................................................... 5
INTRODUCTION ............................................................................................................................. 6
IMPORTANT SAFETY INSTRUCTIONS ............................................................................................... 6
DANGER ...................................................................................................................................... 7
WARNINGS .................................................................................................................................. 7
IMPORTANT REQUIREMENTS .......................................................................................................... 8
HEALTH RISK WARNING ............................................................................................................... 8
PEDICURE SPA SPECIFICATIONS.................................................................................................... 9
COMPONENT REFERENCE ........................................................................................................... 10
INSTALLING THE CHAIR ON THE BASE .......................................................................................... 11
REMOVING AND REPLACING LOCKING CAP .................................................................................. 12
PEDICURE PRODUCT GUIDELINES ................................................................................................ 12
OPERATING INSTRUCTIONS ......................................................................................................... 13
GETTING STARTED ..................................................................................................................... 13
SHUTTING DOWN........................................................................................................................ 13
USER MAINTENANCE .................................................................................................................. 13
STAINS:..................................................................................................................................... 13
THINGS TO AVOID: ..................................................................................................................... 13
DAMAGE TO UNIT: ...................................................................................................................... 13
ROLLER / VIBRATION MASSAGE SYSTEM ..................................................................................... 14
PIPE-FREE SPA CLEANING AND DISINFECTING PROCEDURES ........................................................ 15
PEDICURE SPA CLEANING LOG SHEET ........................................................................................ 16
REPLACEMENT PARTS ................................................................................................................ 17
HISTORY AND NOTES .................................................................................................................. 19
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 5 of 20
INTRODUCTION
Thank you for selecting EUROPEAN TOUCH, the leading designer, manufacturer, and marketer of
pedicure spas in North America. The Omni Spa (herein referred to as pedicure spa) is an innovative
pedicure spa that has been designed to serve you dependably for many years. Please take time to
thoroughly read this entire manual before installation and use. If you have any problems or have
questions regarding your pedicure spa, please contact EUROPEAN TOUCH’S Technical Support
Department at 1-800-626-6912, Monday through Friday 8 AM to 5:00 PM CST. After hours calls are
recorded and attended to the next business day.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the
following:
Read all instructions before using the Pedicure Spa.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Use the Pedicure Spa only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
2. Never operate the Pedicure Spa if it has a damaged cord or plug, if it is not working properly, if
it has been dropped or damaged, or dropped into water.
3. Never drop or insert any object into any opening.
4. Do not use outdoors.
5. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
Save These Instructions
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 6 of 20
DANGER
1. Never use pins or other metallic fasteners with this appliance.
WARNINGS
1. WARNING: RISK OF ELECTRIC SHOCK; do not permit electric appliances (such as a hair
dryer, lamp, telephone, radio, or television) within 1.5M (5 feet) of this hydromassage bathtub.
2. CAUTION: Test the ground fault circuit interrupter protecting this appliance periodically in
accordance with the manufacturer’s instructions.
3. Temperatures sufficiently high to cause burns may occur regardless of the control setting.
a. Do not use on…
• Infants
• Invalids
• Sleeping or unconscious person
b. Do not use on…
• Sensitive skin
• Person with poor blood circulation
Note: Check the skin in contact with the heated area of the appliance frequently to
reduce the risk of blistering.
4. Excessive water temperature is dangerous and should be checked before use. Maximum
operating water temperature should not exceed 105° F (41° C) and the maximum supply water
temperature should not exceed 120°F (49° C).
5. Always enter and exit the pedicure spa slowly and carefully.
6. Never bring or operate any electrical devices into or near the pedicure spa.
7. Do Not Crush – Avoid sharp folds.
8. Do not stand on or in appliance.
9. Use only while seated.
10. Connect this appliance to a properly grounded outlet only. See Grounding Instructions within
the install manual.
11. Spa basin shall not be used by maintenance or cleaning crew as a slop sink.
Note: Always verify maximum temperatures with your local & state codes.
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 7 of 20
IMPORTANT REQUIREMENTS
EUROPEAN TOUCH requires that you contact your local, licensed plumber and licensed electrician
to install your new pedicure spa. Installation must be in compliance with your local and state building
codes. Your pedicure spa cannot operate efficiently or safely unless it is provided with adequate
electrical power, sufficient water pressure, proper water temperature, and required drainage
capabilities. Contact your local building inspector for information and local code compliance
procedures that need to be followed when having your pedicure spa installed. Subsequent
inspections and approvals that may be required are the responsibility of the purchaser. (See limited
warranty regarding incidental or consequential exclusions – page 2).
HEALTH RISK WARNING
Individuals whose feet or legs are inflamed or have open wounds should not be allowed to use the
pedicure spa at any time. Nail technicians should advise clients to consult their physician before
using the pedicure spa if there is any sign of fungal infection, swelling, fracture, or persistent pain. In
some cases diabetics may experience improved circulation in their feet, but should first consult their
physician prior to receiving a pedicure.
Your client’s pedicure spa experience should be pleasant and comfortable.
If the client experiences any pain or discomfort discontinue the use of the pedicure spa
immediately.
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 8 of 20
PEDICURE SPA SPECIFICATIONS
Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure spa base)
SHIPPING INFORMATION
Spa ships in three separate boxes on one pallet. One box contains the spa base, one contains the
chair, and one contains the chair arms.
Weight:
225 lbs. (102 kg) - includes spa, carton, pallet (estimated)
Shipping Dimensions: 55”L (140cm) x 36.5” W (93cm) x 58”H (147cm)
SPA INFORMATION
Overall dimension, seat upright and forward:
50"L (110cm) x 30”W (76cm) x 53"H (135cm)
Minimum area required for chair in rear position and fully reclined:
72.5”L (184cm) x 49”W (125cm) x 53"H (135cm)
Empty weight (complete): 155lbs (70.5kg)
Water Fill Line Capacity: 5 U.S. gallons
Whirlpool pump motor: 1/6 HP, 110V, 60Hz
Seat upholstery:
Polyurethane
Power source:
110V AC, 2.75 Amps, 60 Hz (GFCI Protected)
X Caution: Pedicure spa must be installed by a licensed electrician and a licensed plumber,
conforming to all local and national electrical codes
Construction:
Fiber Glass base
Geni-Eye Pipeless:
No closed loop circulating pipes, fully drained, easy to clean and sanitize
Electrical switches:
On/Off switch for optional power drain pump. A single hand-held, low voltage remote
control for massage motors.
Compliances:
Cushion is TB133 certified
Limited warranty:
One (1) year on parts from date of shipment. Labor is not included.
________________________________________________________________________________________
NOTE: Due to our policy of continuous improvements, all specifications are subject to change without notice.
All dimensions and weights are approximate
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 9 of 20
COMPONENT REFERENCE
Footrest Pad
Geni-eye Pipless Jet
On/Off Power
Drain Switch
(Optional)
On/Off Motor
Air Switch
Water Faucet
Fill Handle
Overflow
Handle
Sprayer
Drain
Plunger
Note:
Pressing with finger nails, rather than the pads of fingers, will damage the on/off switch and will not be
covered under the warranty.
DO NOT PLUG JET HOLES WITH ANY ITEMS, INCLUDING TOES.
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 10 of 20
INSTALLING THE CHAIR ON THE BASE
1. Attach the swivel to the bottom of the chair using the supplied cap screws and lock washers using the
supplied hex wrench.
2. Attach the chair/swivel assembly to the base using the (4) star knobs. Two people are recommended
to lift the chair into position.
3. Attach the armrests using the supplied nuts and lock washers using the supplied wrench.
4. Place the transformer on the wooden base and plug the chair into the barrel plug.
5. Plug the transformer into the air switch box already screwed to the base. Plug it only into the forward
facing outlet. This outlet is always energized.
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 11 of 20
REMOVING AND REPLACING LOCKING CAP
Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site,
at www.europeantouch.com.
1. Place the cap into position and turn clockwise until the locking pin is at the top right corner of the motor mount.
2. To remove cap the use of a tool is required.
3. Insert tool shown in diagram (below) adjacent to locking pin.
4. Gently turn the cap counter-clockwise to remove cap.
Cover Removal
Tool
Geni-eye
Pipeless Cover
PEDICURE PRODUCT GUIDELINES
Because there are so many different products on the market, it is difficult to list all of the pedicure products that
are safe to use in our pedicure spas. However, the following guidelines can be used:
•
•
•
•
•
It is your responsibility to understand and follow your state’s regulations regarding product cleaning and
disinfecting requirements.
Do not use any products containing a foaming agent; this will cause excessive foam.
It has been determined that products containing non-dissolving abrasives (such as sand and sea salts)
will not harm the internal component structure of your pedicure spa as long as the entire EUROPEAN
TOUCH cleaning requirements are followed without deviation.
Oil based products may be used in your pedicure spa as long as the cleaning requirements are met.
Please use pedicure products and cleaning solutions in accordance with each manufacturer's
directions.
EUROPEAN TOUCH pedicure spas will give you many years of service as long
as proper precautions, precise cleaning, and operating instructions are followed.
It is the responsibility of the pedicure spa user to properly clean and maintain
the pedicure spa.
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 12 of 20
OPERATING INSTRUCTIONS
GETTING STARTED
1. Check that the waste & overflow control valve is closed.
2. Open the faucet handle and fill tub with water until the water level is 1” above jets.
3. Press on/off air button switch to start the jets.
4. Adjust the air control to desired flow.
The jets system must not be turned on when the system is dry, as damage may occur. Such
damage is not covered by warranty.
While the jet action is in operation, do not use an excessive amount of soap, bath oils or
detergent, as high action turbulence often causes foaming.
DO NOT PLUG JET HOLES WITH ANY ITEM, INCLUDING TOES.
SHUTTING DOWN
1. Push in the on/off air button switch to turn jets off.
2. Open waste & overflow control and check that the drain valve is open.
3. Press the on/off PDP button (an option to purchase to aid draining.)
4. Clean tub (see following page)
USER MAINTENANCE
STAINS: For stubborn stains start with a liquid detergent, if this does not work, try a mild powder
detergent such as Spic ‘n Span, which also works well for removing heavy soap film. Cleaning pads
made of nylon; saran or polyethylene containing no abrasives may be used. DO NOT USE
ABRASIVE SCOURING POWDERS OR METAL SCOURING PADS as they can permanently
damage the finish. A mild abrasive action can be accomplished with an automotive type of rubbing
compound. Should your stain removal result in a dull area; the shine can be restored with an
automotive polish and wax, such as Turtle Wax.
THINGS
bleach.
TO
AVOID: Sand and grit. Dropped tools. Acetone on any acrylic surface. Undiluted
DAMAGE TO UNIT: Should your unit suffer accidental damage or require servicing, a qualified repair
person may perform the needed repair. Consult your spa representative.
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 13 of 20
ROLLER / VIBRATION MASSAGE SYSTEM
Turning On\Off
1. Press POWER button to turn ON.
2. Repeat Step #1 to turn OFF.
Initiate roller massage in seat back
1) Press the membrane switch under “ROLLER”.
2) Massage will automatically turn off in 20 minutes.
Initiate seat vibration massage.
1. Select vibration zone Lower Back, Upper Back or both.
2. Choose appropriate strength, speed vibration, along with function
A = Wave
B = Pulse
C = Continuous
Selecting Massage Mode Cycle Time
1. Massage system is preprogrammed for 20 minutes.
“Roller”
“Power button”
Turns rolling
mechanism on
Turns remote control on
“Seat vibration”
Turns on Lower Back
“Seat vibration”
Turns on Upper Back
“Vibration Strength”
High, Medium, Low
“Vibration Speed”
High, Medium, Low
“Vibration Function”
A = Wave
B = Pulse
C = Continuous
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 14 of 20
PIPE-FREE SPA CLEANING AND DISINFECTING PROCEDURES
Always check with your state board for required cleaning and disinfecting procedures.
It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last pedicure of the day,
and once a week for overnight cleaning. Regular cleaning will help keep your pedicure spa in good working condition.
Proper and continuous cleaning will kill harmful bacteria and germs that can cause infection. To clean your pedicure spa
equipped with Pipeless technology, follow these easy steps.
Procedures for Cleaning and Disinfecting Pipe-Free Pedicure spas
After use upon each patron, each Pipe-Free Pedicure spa shall be cleaned and disinfected in the following sequential
manner:
(1) All water shall be drained from the spa basin.
(2) Remove Pipe-Free Cover by inserting removal tool and turning counter-clockwise.
(3) Using handheld sprayer, rinse side walls of basin, pipe free jet and pipe free cover of all residue and debris.
(4) Scrub all visible residue from the Pipe-Free Cover, inside walls of the basin, and/or other components and the
areas behind or under each with a clean brush and liquid soap (labeled as such on soap product) and water.
Rinse with clean water.
(5) Reinsert the properly cleaned Pipe-Free Cover over jet, and dry basin completely.
Disinfecting with water filled basin directions:
(1) Refill the basin with clean water and circulate the correct amount (read the label for mixing instructions) of the
(2)
(3)
EPA-registered hospital-liquid disinfectant, which the label claims is a bactericide, fungicide, and virucide,
through the basin for at least 10 minutes.
Drain, rinse and wipe the basin dry with a clean paper towel.
Record this procedure in the pedicure-cleaning log. The log shall contain the date and time of each cleaning,
initials of the person who completed the procedure, and shall indicate that the cleaning was done after a client.
Disinfecting with Ready to Use (RTU) products and surface saturation directions:
(1) Spray to saturate inside of basin, all basin walls and area inside Pipe-Free Jet area with EPA registered
(2)
(3)
disinfectant and allow sitting for at least 10 minutes.
Submerge Pipe-Free Cover in container of EPA registered disinfectant for at least 10 minutes OR spray PipeFree Cover to saturate with EPA registered disinfectant and lay inside basin for a minimum of 10 minutes.
Rinse and wipe the basin dry with a clean paper towel. Follow step (4) above.
At the end of every day and after performing the procedures provided in subsection (b) (1 through 6) and after the last
client, each pipe-free pedicure spa shall be cleaned and disinfected in the following sequential manner:
(1) Fill the basin with warm water and detergent (labeled as such on detergent product) and circulate the detergent
through the spa system for at least 10 minutes.
(2) Drain the detergent solution and rinse the basin.
(3) Refill the basin with clean water and circulate the correct amount (read the label for mixing instructions) of the
EPA-registered hospital-liquid disinfectant which the label claims is a bactericide, fungicide, and virucide,
through the basin for at least 10 minutes.
(4) Drain, rinse and wipe the basin dry with a clean paper towel.
(5) Allow the basin to dry completely.
(6) Record this procedure in the pedicure-cleaning log. The log shall contain the date and time of each cleaning,
initials of the person who completed the procedure, and shall indicate that the cleaning was done at the end of
the day.
At least once each week, after completing the procedures provided in subsection (c) (1 through 3), and the disinfectant
solution in each pipe-free pedicure spa shall not be drained and the following sequential procedures shall be followed:
(1) The unit shall be turned off and the disinfecting solution shall be left in the unit undisturbed for 6 to 10 hours.
(2) After the disinfectant solution has been sitting between 6 to 10 hours, rinse and wipe the basin dry with a clean
paper towel.
(3) Record this procedure in the pedicure-cleaning log. The log shall contain the date and time of each cleaning,
initials of the person who completed the procedure, and shall indicate that the cleaning was done weekly.
The pedicure-cleaning log shall be made available upon request by either a patron or a state board representative.
A violation of this section may result in an administrative fine and/or disciplinary action.
CAUTION: Cleaning products that contain abrasives can damage the pedicure spa. Use only non-abrasive products to
clean your spa.
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 15 of 20
PEDICURE SPA CLEANING LOG SHEET
“Sample”
Pedicure Spa #
Date
Document ID: 10080000
Time
Initials
Rev: B
After Client
End of Day
Technical Support: 1-800-626-6912
Weekly
Page 16 of 20
REPLACEMENT PARTS
SPA ASSEMBLY
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 17 of 20
ITEM
NO.
PART NUMBER
DESCRIPTION
QTY.
1
1016010X(0-1,9)
CHAIR ROLLER BLACK
1
2
10040002
REMOTE WAND
1
3
10130000
FAUCET SPRAYER ASSEMBLY
1
4
10040000
SWITCH MEMBRANE DRAIN
1
5
39150007
ASM MOTOR EUROPEAN TOUCH SYSTEM
1
6
10130001
BUTTON AIR VALVE
1
7
10020000
SWIVEL
1
8
14040151
CABLE MODULAR BUTTON
1
9
101600XX(00-02,20-22)
OMNI SPA 110V/220V BASE WHITE/BLACK/BONE
1
10
10000050
FOOTREST OMNI
1
11
10150001
12
10150000
13
30010218
COUPLER 1.50” TO 1.50”
1
14
10010004
KNOB ATTACH CHAIR TO BASE
4
15
10010000
DRAIN ASSEMBLY
1
16
10030000
DECAL OMNI SPA LOGO
1
17
10010002
TRIM BLACK RUBBER
1
18
10040001
TRANSFORMER CHAIR -- CLASS 2
1
19
14040422
CONTROL BOX DRAIN PUMP PIPEFREE SCS
1
20
00040100
POWER STRIP
1
21
14020002
BRACKET POWER STRIP
1
22
14050001
PLYWOOD 8.5 X 3 X .25
1
Document ID: 10080000
SUBASM HIGH CAPACITY POWER DRAIN PUMP
(OPTIONAL)
SUBASM POWER DRAIN PUMP
(OPTIONAL)
Rev: B
Technical Support: 1-800-626-6912
1
1
Page 18 of 20
HISTORY AND NOTES
Document ID: 10080000
Rev: B
Technical Support: 1-800-626-6912
Page 19 of 20
EUROPEAN TOUCH
8301 W. Parkland Court
Milwaukee, WI 53223
Phone Number:
Toll Free:
Fax:
Web Site:
Email:
1-414-357-7016
1-800-626-6912
1-414-357-6360
www.europeantouch.com
info@europeantouch.com
Download PDF