Read More About VE

Read More About VE
TECHNICAL
Practice
TELECOM SOLUTIONS
FOR THE
Practice
VE-LIGHT
Enclosure Lighting
Kit
2 1 S T C E N T U RY
February 15, 2005
Add Panel Lighting to Your
Viking Doorbox or Entry Phone
The VE-LIGHT kit adds bright LED illumination to
any doorbox or entry phone that is housed in a Viking
VE-5x5 or VE-6x7 enclosure. It can also be used on
Viking’s E-1600A-BLT-EWP tower phone.
The stainless steel bracket is easily mounted using
existing holes and hardware. Two bright white LEDs
are used as the light source, so there are no filaments to break or bulbs to burn out.
VE-LIGHT shown above with Viking W-3000
and VE-5x5 (not included)
Phone...715.386.8861
If used with the W-1000 or W-3000, the VE-LIGHT
can be wired directly to the AC power input of the
doorbox, or use the included 12 volt power supply.
Any power source between 12 and 24 volts, AC or
DC can be used to supply the VE-LIGHT with power.
Applications
• Use in combination with the VE-5x5 and:
Features
• Ultra bright LEDs for long life
• Easy retro-fit to existing entry phones
• Can use the same power source as doorbox
-
E-10 (Fax Back Number 210)
E-30 (Fax Back Number 212)
W-1000 (Fax Back Number 170)
W-3000 (Fax Back Number 180)
E-1600-20A (Fax Back Number 215)
• Use in combination with the VE-6x7 and the
K-1700-3 Apartment Entry Phone (Fax Back
Number 157)
• Can be powered from 12 to 24 volts AC or DC
[email protected]
h t t p : / / w w w. v i k i n g e l e c t r o n i c s . c o m
Made in the U.S.A.
• Use in combination with the E-1600A-BLTEWP (Fax Back Number 217)
Specifications
Power: 120V AC/12V DC 500mA, UL listed adapter provided or
use any 12-24V AC or DC source @ 50mA
Dimensions: 127mm x 8mm x 25mm (5” x 3” x 1”)
Environmental: -26°C to 54°C (-15°F to 130°F) with 5% to 95%
non-condensing humidity
Shipping Weights: 0.45 kg (1 lb)
Maximum Power Run: 304m (1000 ft) using 24 AWG wire
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666
Our Technical Support Department is available for assistance Monday 8am-4pm and Tuesday-Friday 8am - 5pm central time. So that we can give you better service, before you call please:
1. Know the model number, the serial number and what software version you have (see serial label).
2. Have your Technical Practice in front of you.
3. It is best if you are on site.
RETURNING PRODUCT FOR REPAIR
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that needs repair:
1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA)
number. The customer MUST have a complete description of the problem, with all pertinent information regarding the
defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.
2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static
sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include
ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:
Viking Electronics, 1531 Industrial Street, Hudson, WI 54016
3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The
customer MUST be able to step through recommended tests for diagnosis.
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input
and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14)
calendar days from the date of issue.
3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your
distributor will then replace the product over the counter at no charge. The distributor will then return the product to
Viking using the same R.A. number.
4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't
followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.
WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manufactured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's
Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others.
Vikings sole responsibility shall be to repair or replace (at Viking's option) the material within the terms stated above. VIKING SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESSED OR IMPLIED, OR FOR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED
BEYOND THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
Installation
Step 1. Disconnect power from the doorbox or phone.
Step 2. Remove the doorbox or phone from the surface mount box (VE-5X5, VE-6X7, or E-1600A-BLT-EWP).
Step 3. Connect the two wires from the VE-LIGHT to the power input terminals of the doorbox or use the included power
supply and wire nuts (see Diagram 1). Note: Wires can be connected in either polarity.
Step 4. Place the VE-LIGHT bracket against the upper mounting lip of the surface mount box and route wires through the
provided slot (see Diagram 1).
Step 5. Carefully place the phone or doorbox back into the surface mount box, making sure the wires stay in the slot
(see Diagram 2).
Front View of the VE-LIGHT
Diagram 1
Wiring Shown for:
W-1000/EWP
W-3000/EWP
Wiring Shown for:
E-10/EWP
E-30/EWP
E-1600-20A
E-1600A-BLT-EWP
K-1700-3/EWP
Wires MUST be
routed through the
provided slot.
120V AC
12V DC
Adapter
(included)
Wire Nuts
(included)
Rear View of Doorbox
(not included)
or
VE-LIGHT
Surface Mount Box
(VE-5x5 shown, not included)
Phone or Doorbox
(W-1000 shown, not included)
Call
Product Support Line...715.386.8666
IMPORTANT: Electronic devices
are susceptible to lightning and
power station electrical surges from both
the AC outlet and the telephone line. It is
recommended that a surge protector be
installed to protect against such surges.
Contact Panamax at (800) 472-5555 or
Electronic Specialists Inc. at (800) 2254876.
!
Diagram 2
Fax Back Line...715.386.4345
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 428
Printed in the U.S.A.
ZF301930 Rev A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement