advertisement
Quick Guide [Copy/Print/Fax/Scan Operations]
INDEX
1. Introduction
2. Using as a Copy Machine
3. Using as a Fax Machine
4. Using as a Printer
5. Using as a Scanner
6. Troubleshooting
7. Utility
8. Index
Table Of Contents
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (for U.S.A. users)............ 1-17
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 4) (for Canada users) .... 1-17
bizhub 215 Contents-1
Contents-2 bizhub 215
bizhub 215 Contents-3
Contents-4 bizhub 215
1
1 Energy Star® 1.1
1
1.1
Introduction
This [Quick Guide Copy/Print/Fax/Scan Operations] uses illustrations to describe operating procedures for the most commonly used functions in an easy-to-understand way.
Start by using this manual to become proficient with the useful functions that this machine offers.
For details on the various functions, refer to the User’s Guides on the User’s Guide CD included with this machine.
this manual before use.
-
-
In addition, this manual contains the following information. Be sure to read the manual before using the machine.
Items that must be observed to use the machine safely
Information regarding product safety
Precautions when using the machine
The illustrations used in this manual may appear slightly different from views of the actual equipment.
Energy Star
®
As an ENERGY STAR
®
Partner, we have determined that this machine meets the ENERGY STAR
®
Guidelines for energy efficiency.
What is an ENERGY STAR
®
Product?
An ENERGY STAR
®
product has a special feature that allows it to automatically switch to a "low-power mode" after a period of inactivity. An ENERGY STAR
®
product uses energy more efficiently, saves you money on utility bills and helps protect the environment.
1-2 bizhub 215
1.2
1.2
Trademarks and copyrights 1
Trademarks and copyrights
KONICA MINOLTA, the KONICA MINOLTA logo, and The essentials of imaging are registered trademarks of
KONICA MINOLTA HOLDINGS, INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA MINOLTA BUSINESS
TECHNOLOGIES INC.
Netscape is a registered trademark of Netscape Communications Corporation in the United States and other countries.
Mozilla and Firefox are trademarks of the Mozilla Foundation.
Novell and Novell NetWare are registered trademarks of Novell, Inc. in the United States and other countries.
Microsoft, Windows, Windows NT and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
In regard to the Citrix Technology Member
KONICA MINOLTA BUSINESS TECHNOLOGIES, Inc. is a Citrix Technology Member
The Citrix Technology Member is a program that, in combination with a solution of Citrix, promotes and develops solutions in order to be an industry leader in providing customers with better solutions.
XenApp
TM
, Citrix XenServer
TM
and Citrix Presentation Server
TM
are trademarks of Citrix
®
Apple, Macintosh and Mac OS are registered trademarks of Apple Computer, Inc. Safari is a trademark of
Apple Computer, Inc.
Adobe, the Adobe logo, Acrobat and PostScript are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Ethernet is a registered trademark of Xerox Corporation.
PCL is a registered trademark of Hewlett-Packard Company Limited.
This machine and PageScope Box Operator are based in part on the work of the Independent JPEG Group.
This product contains Adobe
®
Flash
®
Player under license from Adobe Systems Incorporated.
Copyright © 1995-2007 Adobe Macromedia Software LLC. All rights reserved.
Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
OpenSSL Statement
OpenSSL License
Copyright © 1998-2006 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1.
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3.
All advertising materials mentioning features or use of this software must display the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/)"
4.
The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected].
5.
Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6.
Redistributions of any form whatsoever must retain the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)" bizhub 215 1-3
1 Trademarks and copyrights 1.2
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson ([email protected]).
Original SSLeay License
Copyright © 1995-1998 Eric Young ([email protected]) All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code.
The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1.
Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3.
All advertising materials mentioning features or use of this software must display the following acknowledgement:
"This product includes cryptographic software written by Eric Young ([email protected])"
The word 'ecryptographic' can be left out if the rouines from the library being used are not cryptographic related.
4.
If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:
"This product includes software written by Tim Hudson ([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the
GNU Public Licence.]
1-4 bizhub 215
1.2
Trademarks and copyrights 1
Kerberos
Copyright © 1985-2007 by the Massachusetts Institute of Technology.
All rights reserved.
Export of this software from the United States of America may require a specific license from the United
States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.
WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Furthermore if you modify this software you must label your software as modified software and not distribute it in such a fashion that it might be confused with the original MIT software. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.
THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
Individual source code files are copyright MIT, Cygnus Support, Novell, OpenVision Technologies, Oracle,
Red Hat, Sun Microsystems, FundsXpress, and others.
Project Athena, Athena, Athena MUSE, Discuss, Hesiod, Kerberos, Moira, and Zephyr are trademarks of the
Massachusetts Institute of Technology (MIT). No commercial use of these trademarks may be made without prior written permission of MIT.
"Commercial use" means use of a name in a product or other for-profit manner. It does NOT prevent a commercial firm from referring to the MIT trademarks in order to convey information (although in doing so, recognition of their trademark status should be given).
Portions of src/lib/crypto have the following copyright:
Copyright © 1998 by the FundsXpress, INC.
All rights reserved.
Export of this software from the United States of America may require a specific license from the United
States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.
WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of FundsXpress. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. FundsXpress makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.
THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
The implementation of the Yarrow pseudo-random number generator in src/lib/crypto/yarrow has the following copyright:
Copyright 2000 by Zero-Knowledge Systems, Inc.
Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Zero-
Knowledge Systems, Inc. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Zero-Knowledge Systems, Inc. makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.
bizhub 215 1-5
1 Trademarks and copyrights 1.2
ZERO-KNOWLEDGE SYSTEMS, INC. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
ZERO-KNOWLEDGE SYSTEMS, INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTUOUS ACTION, ARISING OUT
OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
The implementation of the AES encryption algorithm in src/lib/crypto/aes has the following copyright:
Copyright © 2001, Dr Brian Gladman <[email protected]>, Worcester, UK.
All rights reserved.
LICENSE TERMS
The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided that:
1.
distributions of this source code include the above copyright notice, this list of conditions and the following disclaimer;
2.
distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other associated materials;
3.
the copyright holder's name is not used to endorse products built using this software without specific written permission.
DISCLAIMER
This software is provided 'as is' with no explcit or implied warranties in respect of any properties, including, but not limited to, correctness and fitness for purpose.
Portions contributed by Red Hat, including the pre-authentication plug-ins framework, contain the following copyright:
Copyright © 2006 Red Hat, Inc.
Portions copyright © 2006 Massachusetts Institute of Technology
All Rights Reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of Red Hat, Inc., nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Portions funded by Sandia National Laboratory and developed by the University of Michigan's Center for
Information Technology Integration, including the PKINIT implementation, are subject to the following license:
COPYRIGHT © 2006-2007
THE REGENTS OF THE UNIVERSITY OF MICHIGAN
ALL RIGHTS RESERVED
1-6 bizhub 215
1.2
Trademarks and copyrights 1
Permission is granted to use, copy, create derivative works and redistribute this software and such derivative works for any purpose, so long as the name of The University of Michigan is not used in any advertising or publicity pertaining to the use of distribution of this software without specific, written prior authorization. If the above copyright notice or any other identification of the University of Michigan is included in any copy of any portion of this software, then the disclaimer below must also be included.
THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE UNIVERSITY OF
MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT WARRANTY BY THE UNIVERSITY OF
MICHIGAN OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING
SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM
ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS
HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The pkcs11.h file included in the PKINIT code has the following license:
Copyright 2006 g10 Code GmbH
Copyright 2006 Andreas Jellinghaus
This file is free software; as a special exception the author gives unlimited permission to copy and/or distribute it, with or without modifications, as long as this notice is preserved.
This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, to the extent permitted by law; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
OpenLDAP
Copyright 1998-2001 The OpenLDAP Foundation
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted only as authorized by the OpenLDAP Public License. A copy of this license is available at http://www.OpenLDAP.org/license.html or in file LICENSE in the top-level directory of the distribution.
OpenLDAP is a registered trademark of the OpenLDAP Foundation.
Individual files and/or contributed packages may be copyright by other parties and subject to additional restrictions.
This work is derived from the University of Michigan LDAP v3.3 distribution. Information concerning this software is available at: http://www.umich.edu/~dirsvcs/ldap/
This work also contains materials derived from public sources.
Additional Information about OpenLDAP can be obtained at: http://www.openldap.org/ or by sending e-mail to: [email protected]
Portions Copyright © 1992-1996 Regents of the University of Michigan.
All rights reserved.
Redistribution and use in source and binary forms are permitted provided that this notice is preserved and that due credit is given to the University of Michigan at Ann Arbor. The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission.
This software is provided "as is" without express or implied warranty.
bizhub 215 1-7
1 Trademarks and copyrights 1.2
Cyrus SASL
CMU libsasl
Tim Martin
Rob Earhart
Rob Siemborski
Copyright © 2001 Carnegie Mellon University.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1.
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3.
The name "Carnegie Mellon University" must not be used to endorse or promote products derived from this software without prior written permission. For permission or any other legal details, please contact
Office of Technology Transfer
Carnegie Mellon University
5000 Forbes Avenue
Pittsburgh, PA 15213-3890
(412) 268-4387, fax: (412) 268-7395 [email protected]
4.
Redistributions of any form whatsoever must retain the following acknowledgment:
"This product includes software developed by Computing Services at Carnegie Mellon University
(http://www.cmu.edu/computing/)."
CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
CARNEGIE MELLON UNIVERSITY BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Smbfs
Copyright © 2000, 2001 Boris Popov
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1.
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3.
All advertising materials mentioning features or use of this software must display the following acknowledgement:
This product includes software developed by Boris Popov.
4.
Neither the name of the author nor the names of any co-contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
1-8 bizhub 215
1.2
Trademarks and copyrights 1
DES part of SSLeay
Copyright © 1995-1996 Eric Young ([email protected])
All rights reserved.
This file is part of an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL specification. This library and applications are FREE FOR COMMERCIAL AND NON-COMMERCIAL USE as long as the following conditions are aheared to.
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this code is used in a product, Eric Young should be given attribution as the author of the parts used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1.
Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3.
All advertising materials mentioning features or use of this software must display the following acknowledgement:
This product includes software developed by Eric Young ([email protected])
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the
GNU Public Licence.]
Wide DHCPv6
Copyright © 1998 and 1999 WIDE Project.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1.
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3.
Neither the name of the project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
bizhub 215 1-9
1 Trademarks and copyrights 1.2
OpenSLP
Copyright © 2000 Caldera Systems, Inc
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Caldera Systems nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE CALDERA SYSTEMS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright
© 2011 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. All Rights Reserved.
Note
User's Guide may not be reproduced in part or in full without permission.
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. will not be held liable for any incidents caused by using this printing system or User's Guide.
Information included in User's Guide is subject to change without notice.
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. maintains the copyright of the printer drivers.
1-10 bizhub 215
1.3
1.3
SOFTWARE LICENSE AGREEMENT 1
SOFTWARE LICENSE AGREEMENT
This package contains the following materials provided by KONICA MINOLTA BUSINESS TECHNOLOGIES,
INC. (KMBT): software included as part of the printing system ("Printing Software"), the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host
Software"), and related explanatory written materials ("Documentation"). The term "Software" shall be used to describe Printing Software, Font Programs and/or Host Software and also include any upgrades, modified versions, additions, and copies of the Software.
The Software is being licensed to you under the terms of this Agreement.
KMBT grants to you a non-exclusive sublicense to use the Software and Documentation, provided that you agree to the following:
1.
You may use the Software and accompanying Font Programs for imaging to the licensed output device(s), solely for your own internal business purposes.
2.
In addition to the license for Font Programs set forth in Section 1 above, you may use Roman Font
Programs to reproduce weights, styles, and versions of letters, numerals, characters and symbols
("Typefaces") on the display or monitor for your own internal business purposes.
3.
You may make one backup copy of the Host Software, provided your backup copy is not installed or used on any computer. Notwithstanding the above restrictions, you may install the on any number of computers solely for use with one or more printing systems running the Printing Software.
4.
You may assign its rights under this Agreement to an assignee of all of Licensee's right and interest to such Software and Documentation ("Assignee") provided you transfer to Assignee all copies of such
Software and Documentation Assignee agrees to be bound by all of the terms and conditions of this
Agreement.
5.
You agree not to modify, adapt or translate the Software and Documentation.
6.
You agree that you will not attempt to alter, disassemble, decrypt, reverse engineer or decompile the
Software.
7.
Title to and ownership of the Software and Documentation and any reproductions thereof shall remain with KMBT and its licensor.
8.
Trademarks shall be used in accordance with accepted trademark practice, including identification of the trademark owner's name. Trademarks can only be used to identify printed output produced by the
Software. Such use of any trademark does not give you any rights of ownership in that trademark.
9.
You may not rent, lease, sublicense, lend or transfer versions or copies of the Software Licensee does not use, or Software contained on any unused media, except as part of the permanent transfer of all
Software and Documentation as described above.
10.
IN NO EVENT WILL KMBT OR ITS LICENSOR BE LIABLE TO YOU FOR ANY CONSEQUENTIAL,
INCIDENTAL INDIRECT, PUNITIVE OR SPECIAL DAMAGES, INCLUDING ANY LOST PROFITS OR
LOST SAVING, EVEN IF KMBT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR
FOR ANY CLAIM BY ANY THIRD PARTY. KMBT OR ITS LICENSOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SOME STATES OR JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTIAL, CONSEQUENTIAL OR SPECIAL
DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
11.
Notice to Government End Users: The Software is a "commercial item," as that term is defined at 48
C.F.R.2.101, consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212. Consistent with 48 C.F.R. 12.212 and 48
C.F.R. 227.7202-1 through 227.7202-4, all U.S. Government End Users acquire the Software with only those rights set forth herein.
12.
You agree that you will not export the Software in any form in violation of any applicable laws and regulations regarding export control of any countries.
bizhub 215 1-11
1
1.4
Safety information
Safety information
This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual.
Please read the following section before connecting the machine to the supply. It contains important information related to user safety and preventing equipment problems.
Please keep this manual in a handy place near the machine.
Make sure you observe all of the precautions appear in each section of this manual.
KM_Ver.04OE
Tips
Some parts of the contents of this section may not correspond with the purchased product.
Warning and precaution symbols
The following indicators are used on the warning labels or in the manuals to categorize the level of safety warnings.
WARNING Ignoring this warning could cause serious injury or even death.
CAUTION Ignoring this caution could cause injury or damage to property.
1.4
Meaning of symbols
A triangle indicates a danger against which you should take precaution.
This symbol warns against cause burns.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A solid circle indicates an imperative course of action.
This symbol indicates you must unplug the device.
Disassemble and modification
WARNING
• Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness.
• Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness.
Power cord
WARNING
• Use only the power cord supplied in the package. If a power cord is not supplied, only use the power cord and plug that is specified in POWER
CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock.
• Use the power cord supplied in the package only for this machine and
NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock.
1-12 bizhub 215
1.4
Safety information
Power cord
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.
Power source
WARNING
• Use only the power source voltage specified on the machine. Failure to do that could result in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appliances or machines.
Use of a power outlet for more than the marked current value could result in a fire or electrical shock.
• Do not use an extension cord in principle. Use of an extension cord could cause a fire or electrical shock. Contact your authorized service representative if an extension cord is required.
CAUTION
• The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs.
Power plug
WARNING
• Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result.
• Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock.
CAUTION
• Do not place any objects around the power plug, as the power plug may be difficult to pull out when an emergency occurs.
• Do not tug the power cord when unplugging. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock.
• Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates between the plug terminals may cause a fire.
1 bizhub 215 1-13
1
Grounding
WARNING
• Connect the power cord to an electrical outlet that is equipped with a grounding terminal.
Safety information 1.4
Installation
WARNING
• Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.
• Do not use flammable sprays, liquids, or gases inside or near this machine. Do not clean the inside of this machine using a flammable gas duster. A fire or explosion could result.
CAUTION
• After installing this product, mount it on a secure base. If the unit moves or falls, it may cause personal injury.
• Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result.
• Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock. It could drop or fall, causing personal injury or mechanical breakdown.
• Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction.
Ventilation
CAUTION
• Using this product in a poorly ventilated room for a long time or producing a large volume of copies or prints may cause the odor of exhaust air from the machine. Ventilate the room well.
1-14 bizhub 215
1.4
Safety information
Actions in response to troubles
WARNING
• Do not keep using this product, if this product becomes inordinately hot or emits smoke, or unusual odor or noise. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result.
• Do not keep using this product, if this product has been dropped or its cover damaged. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result.
CAUTION
• The inside of this product has areas subject to high temperature, which may cause burns.
When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label.
Consumables
WARNING
• Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage.
CAUTION
• Do not leave toner-related parts (toner units, PC drum units, imaging units or developing units) within easy reach of children. Licking any of these parts or ingesting toner could damage your health.
• Do not store toner-related parts (toner units, PC drum units, imaging units or developing units) near devices susceptible to magnetism, such as precision equipment and data storage devices, otherwise they may malfunction. They could cause these products to malfunction.
When moving the machine
CAUTION
• Whenever moving this product, be sure to disconnect the power cord and other cables. Failure to do this could damage the cord or cable, resulting in a fire, electrical shock, or breakdown.
• When moving this product, always hold it at the locations specified in the
User’s Guide or other documents. If the unit is moved while held at locations other than those specified, it may fall, causing severe personal injury.
When using the machine
CAUTION
• When using the machine, do not look at the light of the lamp for a prolonged time. Eyestrain could result.
bizhub 215
1
1-15
1
Papers
CAUTION
• Do not use stapled paper, conductive paper (such as silver paper or carbon paper) or treated heat-sensitive/inkjet paper, otherwise a fire may result.
When the Fax is not installed:
Before successive holidays
CAUTION
• Unplug the product when you will not use the product for long periods of time.
Safety information 1.4
1-16 bizhub 215
1.5
1.5
Regulation notices 1
Regulation notices
CE Marking (Declaration of Conformity) for users of the European Union (EU)
This product complies with the following EU directives:
2009/125/EC, 2006/95/EC, 2004/108/EC and 1999/5/EC directives.
This declaration is valid for the area of the European Union.
This device must be used with a shielded interface cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR rules and local rules.
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (for
U.S.A. users)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
WARNING: The design and production of this unit conform to FCC regulations, and any changes or modifications must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations.
This device must be used with a shielded interface cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under FCC rules.
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 4) (for
Canada users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
For users in countries not subject to class B regulations
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Laser safety
This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the machine is operated according to the instructions in the manuals.
Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation.
This machine is certified as a Class 1 laser product: This means the machine does not produce hazardous laser radiation.
bizhub 215 1-17
1 Regulation notices
Internal laser radiation
Maximum Average Radiation Power: 6.9 μW (bizhub 215) at the laser aperture of the print head unit.
Wavelength: 770-800 nm
This product employs a Class 3B laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Therefore, the print head unit should not be opened under any circumstances.
1.5
Laser Aperture of the Print Head
Unit Print Head
1-18
The laser opening can be found in the device with the drum unit removed.
CDRH regulations
This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the
Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United
States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation.
The label shown on page 1-20 indicates compliance with the CDRH regulations and must be attached to
laser products marketed in the United States.
CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 7 mW and the wavelength is 770-
800 nm.
For European users
CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 7 mW and the wavelength is 770-
800 nm.
bizhub 215
1.5
Regulation notices
For Denmark users
ADVARSEL
Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funk-tion. Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene.
1
Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 7 mW og bølgelængden er 770-800 nm.
For Finland, Sweden users
LOUKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
VAROITUS!
Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle la-sersäteilylle.
Tämä on puolijohdelaser. Laserdiodin sunrin teho on 7 mW ja aallonpituus on 770-800 nm.
VARNING!
Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Det här är en halvledarlaser. Den maximala effekten för laserdioden är 7 mW och våglängden är 770-800 nm.
VARO!
Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen.
VARNING!
Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen.
For Norway users
ADVARSEL
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksan-visning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1.
Dette en halvleder laser. Maksimal effekt till laserdiode er 7 mW og bølge-lengde er 770-800 nm.
bizhub 215 1-19
1
Laser safety label
A laser safety label is attached to the outside of the machine, as shown below.
Regulation notices 1.5
1-20
Ozone release
Locate the Machine in a Well-Ventilated Room
A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy and safe operating environment, it is recommended that the room be well ventilated.
Placer l’appareil dans une pièce largement ventilée
Une quantité d’ozone négligable est dégagée pendant le fonctionnement de l’appareil quand celui-ci est utilisé normalement. Cependant, une odeur désagréable peut être ressentie dans les pièces dont l’aération est insuffisante et lorsque une utilisation prolongée de l’appareil est effectuée. Pour avoir la certitude de travailler dans un environnment réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil.
Acoustic noise (for European users only)
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.
Notification for US only
Contains Mercury in the LCD control panel backlighting lamp, and/or in the scanning unit lamp. Dispose
According to Local, State or Federal Laws.
bizhub 215
1.5
Regulation notices 1
Notification for California Customers
This product uses a CR Lithium Battery which contains perchlorate material.
This perchlorate warning applies to perchlorate-containing lithium batteries sold or distributed in California,
USA.
"Perchlorate Material - Special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate."
For EU member states only
This symbol means: Do not dispose of this product together with your household waste!
Please refer to the information of your local community or contact our dealers regrading the proper handling of end-of-life electric and electronic equipments.
Recycling of this product will help to conserve natural resources and prevent potential negative consequences for the environment and human health caused by inappropriate waste handling.
For EU member states only
This product complies with RoHS (2002/95/EC) Directive.
This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view.
Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen.
Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren Gesichtsfeld platziert werden.
bizhub 215 1-21
1
1.6
Caution notations and labels 1.6
Caution notations and labels
Safety precaution notations and labels appear on this machine at the following positions. Be very careful that an accident does not occur when operations such as removing paper jams and staple jams are performed.
1-22
NOTICE
Do not remove caution labels or notations. If any caution label or caution notation is soiled, please clean to make legible. If you cannot make them legible, or if the caution label or notation is damaged, please contact your service representative.
bizhub 215
1.7
1.7
Special Notice to User 1
Special Notice to User
For Canada
NOTICE:
This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
AVIS:
Le present materiel est conforme aux specifications techniques applicables d’Industrie Canada.
L’indice d’equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaux qui peuvent etre raccordes a une interface telephonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, a la seule condition que la somme d’indices d’equivalence de la sonnerie de tous les dispositifs n’excede pas 5.
For U.S.A.
FCC PART 68 REQUIREMENTS:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the cover of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If required, this information must be provided to the telephone company.
This equipment uses certification jack USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US: US:AAAEQ##TXXXX.. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this equipment FK-510 causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment FK-510, for repair or warranty information, please contact the
Konica Minolta dealer location where you purchased this equipment. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
bizhub 215 1-23
1 Special Notice to User 1.7
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If you home has specially wired alarm equipment connected to the telephone line, ensure the installation of FK-510 does not disable you alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)
In order to program this information into your FAX machine, you should complete the following steps: See chapter 2.3.6, "Registering a sender name", of the User’s Guide [Fax Operations].
WARNING/CAUTION Explained
WARNING
The exclamation point within an equilateral triangle followed by the word "Warning" is intended to alert the user to the possibility that a disregard for the warning may result in fatal hazards or critical injuries. Be sure to focus your attention on the Warning headings when reading this Quick Guide.
CAUTION
The exclamation point within an equilateral triangle followed by the word "Caution" is intended to alert the user to the possibility that a disregard for the caution may result in minor injuries or in physical damage.
Be sure to focus your attention on the Caution headings when reading this Quick Guide.
For New Zealand
This device is equipped with pulse dialing while the Telecom standard is DTMF tone dialing. There is no guarantee that Telecom lines will always continue to support pulse dialing.
Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Fault Service.
This equipment may not provide for the effective hand-over of a call to another device connected to the same line.
This equipment does not fully meet Telecom’s impedance requirements. Performance limitations may occur when used in conjunction with some parts of the network. Telecom will accept no responsibility should difficulties arise in such circumstances.
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.
The automatic calling functions of this equipment must not be used to cause a nuisance to other customers.
Telepermitted equipment only may be connected to the auxiliary telephone port. The auxiliary port is not specifically designed for 3-wire connected equipment. 3-wire might not respond to incoming ringing when connected to this port.
[UTILITY] - [FAX RX OPERATION] - [NO. of RINGS] setting must be configured between 3 and 10.
1-24 bizhub 215
1.7
Special Notice to User 1
For Europe
The Facsimile has been approved in accordance with Council Decision 1999/5/ EC for pan-European single terminal connection to the public switched telephone network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network terminal point.
In the event of problems, you should contact your equipment supplier in the first instance.
bizhub 215 1-25
1
1.8
Space requirements 1.8
Space requirements
To ensure that machine operation, consumables replenishing, part replacement, and regular maintenance can easily be performed, adhere to the recommended space requirements detailed below.
43-11/16 (1109)
22-7/16 (570) 16-7/8 (429)
14-1/8
(358)
40-7/8 (1038)
Unit: inch (mm)
NOTICE
Be sure to allow a clearance of 3-15/16 inches (100 mm) or more at the back of this machine for the ventilation duct.
1-26 bizhub 215
1.9
1.9
Operation precautions
Operation precautions
To ensure the optimum performance of this machine, observe the precautions described below.
Power source
-
–
The power source requirements are as follows.
Voltage fluctuation: Maximum ± 10% (at AC 110 to 120 V/AC 220 to 240 V), + 6/- 10% (at AC 127 V)
Frequency fluctuation: Maximum ± 3 Hz (at 50 Hz/60 Hz)
Use a power source with as little voltage or frequency fluctuations as possible.
1
Operating environment
The environmental requirements for correct operation of the machine are as follows.
-
-
Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C) within an hour
Humidity: 15% to 85% with fluctuations of no more than 10% within an hour
Storage of copies
-
-
To store copies, follow the recommendation listed below.
Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading.
Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color copy is folded, the toner at the fold may peel off.
bizhub 215 1-27
1 Legal restrictions on copying 1.10
1.10
Legal restrictions on copying
Certain types of originals must never be copied with the purpose or intent to pass copies of such originals off as the originals.
The following is not a complete list, but is meant to be used as a guide to responsible copying.
-
-
-
-
<Financial Instruments>
-
-
Personal checks
Traveler’s checks
Money orders
Certificates of deposit
Bonds or other certificates of indebtedness
Stock certificates
-
-
-
-
-
-
<Legal Originals>
-
-
Food stamps
Postage stamps (canceled or uncanceled)
Checks or drafts drawn by government agencies
Internal revenue stamps (canceled or uncanceled)
Passports
Immigration papers
Motor vehicle licenses and titles
House and property titles and deeds
<General>
-
-
Identification cards, badges, or insignias
Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner.
When in doubt about the nature of an original, consult with legal counsel.
NOTICE
This machine provides the forgery prevention function in order to pre-vent financial instruments from being copied illegally.
We appreciate your understanding that printed images may infrequently have some noise or image data may not be stored under certain circumstances due to this forgery prevention function.
1-28 bizhub 215
1.11
About the User's Guide 1
1.11
About the User's Guide
The User's Guide for this product is composed of book manuals and the "User's Guide CD".
The book manuals showcase points that will enable you to start using this machine quickly. For more details on functions or maintenance procedures, refer to the User's Guide contained on the "User's Guide CD".
Printed manual
[Quick Guide Copy/Print/Fax/Scan/Operations]
This manual describes operating procedures and the most frequently used functions to enable you to begin using this machine immediately.
User's guides contained on the CD
[User's Guide Copy Operations]
-
-
This manual describes details on copy mode operations and the settings of this machine.
Specifications of originals and copy paper
-
Copy function
Maintaining this machine
Troubleshooting
[User's Guide Fax Operations]
-
-
This manual describes details on fax functions.
G3 fax function
Internetwork fax
PC-FAX
[User's Guide Print Operations]
This manual describes details on printer functions.
-
-
Printer function
Setting the printer driver
[User's Guide Scan Operations]
-
-
This manual describes details on scan functions.
-
-
Scan Function
Setting the TWAIN/WIA scan driver
Network scan (E-mail TX, FTP TX, and SMB TX)
Scan to USB
[User's Guide Network Administrator]
This manual describes details on setting methods for each function using the network connection.
-
-
Network settings
Settings using PageScope Web Connection
[Trademarks/Copyrights]
This manual describes details on trademarks and copyrights.
Trademarks and copyrights bizhub 215 1-29
1 Functions of this machine 1.12
1.12
Functions of this machine
The bizhub 215 are digital monochrome MFPs that make your workflow more efficient in any application or office environment. These MFPs provide copy, fax, scanner, and printer functions that are critical to business operations, and they also have a network function that aids in efficient document management.
1-30 bizhub 215
1.12
Functions of this machine 1
Copy function
This function outputs copies containing high-quality images at high speed. Furthermore, a variety of functions enable you to reduce costs and improve efficiency in your office.
Printer function
This function allows you to freely print data from a computer via the USB interface or network as a shared printer. When printing data, you can configure various settings such as the paper size, image quality, and layout. The printer driver can be installed easily from the CD-ROM supplied with this machine.
Fax function
This function sends the original scanned by this machine to a destination. You can send an original as an Email attachment using the Internet fax transmission function. You can also send it to multiple destinations at one time or forward received faxes.
By installing the fax driver, you can directly send a fax from a computer. To use the fax function, optional FAX
Kit FK-510 and Extended Operation Panel MK-733 are required.
Network function
This function allows you to use this machine as a shared printer or to easily send data scanned by this machine to a destination via the network. You can use the Control Panel to send data to the FTP server or send it as an E-mail attachment.
To use the network function, the optional Network Card NC-504 or Image Controller IC-209 and Extended
Operation Panel MK-733 are required.
Scan function
This function quickly converts paper documents into color digital data. You can easily send the converted data via a network. This machine can be used as a scanner with various application software products that are compatible with the TWAIN interface.
To use the scan function, the optional Network Card NC-504 or Image Controller IC-209 and Extended
Operation Panel MK-733 are required.
bizhub 215 1-31
1
1.13
Control Panel
Control Panel 1.13
Name and function of each component of the Control Panel
The Control Panel has a Display area that displays messages and hardware keys such as Start and
Clear/Stop. This section describes the functions of these keys.
1-32
No.
1
2
Name
Mixed Original
Utility
3
4
10
11
12
13
14
15
16
17
8
9
5
6
7
Display
+, ,, *, )
OK
Back
Error
Function
Density
Quality
Zoom
Paper
Mode Memory
Confirm
ID Copy
Combine Original
Finishing
Simplex/Duplex
Function
Press this key to specify the mixed original mode.
In the Utility screen, you can configure the following settings:
Machine setting, paper source setup, custom size memory, drum dehumidify, admin. management, copy setting 1, and copy setting 2, dial registration, fax registration, fax tx operation, fax rx operation, reporting, scan setting
Displays the number of copies, zoom ratio, Utility screen, icons, and error messages.
Use +, ,, *, or ) to move an option item in the Display or to change settings.
Press OK to determine settings.
Press this key to return to the previous screen.
This lamp lights up or flashes when an error occurs.
Press this key to configure the advanced copy settings such as copying with a binding position.
Press this key to specify the density with which to scan the original to be copied.
Press this key to select the image quality of the original from
[TEXT], [PHOTO], and [TEXT/PHOTO].
Press this key to enlarge or reduce an image in copy mode.
Press this key to select a paper tray to be used.
Press this key to register or recall the configured copy function.
Press this key to confirm the counter or communication result, or print out a report.
Press this key to copy the contents of the front and back sides of a card-size original such as a driver's license, onto one sheet.
Press this key to copy a multi-page original onto one sheet.
Press this key to select the copy finishing mode.
Press this key to use the 1-sided or 2-sided printing function.
bizhub 215
1.13
Control Panel
No.
18
19
20
21
22
Name
Printer Indicator
Printer
Access
Power Save
A.../1...
23 Reset
24 Clear/Stop
25 Start
26 Keypad
Function
This indicator lights up green when the machine is in printer mode.
Press this key to use the printer mode.
Press this key to use account track.
Press this key to switch to sleep mode.
Press this key to switch between numerals and letters you enter from the Keypad.
• Press this key to reset all settings you entered on the Control
Panel. (Excluding the registered settings)
• Press this key to erase the jobs you are currently configuring.
• Press this key to clear the digit your are currently entering.
• Press this key to stop continuous copy operations.
• Press this key to stop PC printing.
• Press this key to start a copy operation.
• Pressing this key while the machine is warming up starts the
Next Copy Job function.
• This key lights up blue when the machine is ready to accept a copy job, and lights up orange when the machine is not ready to start a copy operation.
• Specify the number of copies.
• Enter various settings.
1 bizhub 215 1-33
1 Control Panel 1.13
Extended Operation Panel MK-733 (Option)
1 2 3 4
No.
1
Name
Fax
2 Scan
3
4
5
6
Copy
Auto RX Indicator
Memory TX
On Hook
7 Redial/Pause
8
9
10
Speed Dial
AddressBook
Switching Plate
11 One-Touch Dial Key
5
6
7
8
9
11 10
Function
Press this key to switch to fax mode.
The lamp lights up green to indicate that the machine is in fax mode.
Press this key to switch to scan mode.
The lamp lights up green to indicate that the machine is in scan mode. (This function is available only when Network Card NC-504 or Image Controller IC-209 is installed. )
Press this key to switch to copy mode. The lamp lights up green to indicate that the machine is in copy mode.
This indicator lights up green when the machine is set in Auto RX mode.
Press this key to configure a Memory TX. This lamp lights up green when the Memory TX mode is set to ON.
Press this key to set the machine in the state where the phone can be taken off the hook. Repressing this key returns the machine to the state where the phone can be hung up.
• Press this key to redial the last recipient you called.
• This function is available in the wait time to make a call from an extension line to an external line, or to receive information from an information service.
Press this key to dial a fax number pre-registered in the speed dial.
Press this key to display the information registered in the Onetouch Dial, group dial, and speed dial.
Use this plate to switch the One-Touch Dial Key numbers. When the Switching Plate is closed downward, One-touch Dial keys 01 to 16 are available. When it is opened upward, One-touch Dial keys
17 to 32 are available.
• Press this key to dial a pre-registered destination.
• Use keys 01 to 32 to configure One-Touch Dial Key and group dial settings.
• Use keys 29 to 32 to configure program dial settings.
1-34 bizhub 215
1.14
Operations on the Control Panel
1.14
Operations on the Control Panel
When changing a setting, use +, ,, *, or ) on this machine to move the cursor. To determine the setting you have selected, press OK.
1
Specifying the zoom ratio
The following describes operations on the Control Panel, using the procedure for specifying the zoom ratio as an example.
1
Press the Zoom button.
2
Press , once, then press OK.
3
Press , twice, then press OK.
bizhub 215
The zoom ratio has been specified.
Tips
In this document, the procedure described above is written as "Use +, to select, then press OK". To correct the action you have carried out, press Back to return to the previous screen.
1-35
1
1.15
Turning the power on/off
Turning on the power
Turning the power on/off 1.15
Turning off the power
1-36
-
-
-
Tips
In sleep mode, Power Save lights up green and the Display on the Control Panel turns off. This machine exits sleep mode when you press any key on the Control Panel. You do not need to turn the power off and on.
Do not turn off the power when using the fax function. Otherwise, fax reception fails.
Do not turn off the power during printing. Otherwise, a paper jam may occur.
If you turn off the power while this machine is operating, the data being scanned, transmitted, or received, and jobs waiting to be performed, are deleted.
d
Reference
For details on turning the power on/off, refer to Chapter 2 of the [User's Guide Copy Operations].
bizhub 215
1.16
Original Set 1
1.16
Original Set
You can load originals into this machine by placing them sheet by sheet onto the Original Glass or by putting multiple sheets into the ADF .
Loading the original onto the Original Glass
1
Open the ADF and load the original on it.
% Load the original with the side you want to copy facing down.
% Load the original along the Original Scales on the left and at the top of the Original Glass.
% When loading a transparent original (such as OHP transparencies) or a thin original (tracing paper), place white paper on the original.
% For sizes of originals that can be loaded onto the Original Glass, refer to Chapter 3 of the [User's
Guide Copy Operations].
2
Gently close the ADF.
You can also load a book original onto the Original Glass.
For details on the procedure, refer to Chapter 3 of the [User's Guide Copy Operations].
Loading the original into the ADF
bizhub 215
1
Open the Lateral Guide and load the original.
% Load the original with the side you want to copy facing up.
% Do not load more than 70 sheets into the ADF at a time, and do not load the sheets up to the point where the top of the stack is higher than the , mark. Otherwise, a paper jam may occur or the originals or the machine may be damaged.
% For sizes of originals that can be loaded into the ADF, refer to Chapter 3 of the [User's Guide Copy
Operations].
2
Adjust the Lateral Guide to the original size.
% If the original is not loaded correctly, it may not be fed in straight.
% You can also load mixed originals into the ADF. For details on the procedure, refer to Chapter 3 of the [User's Guide Copy Operations].
1-37
1 Original Set 1.16
d
Reference
If the orientation in which the original is loaded differs from the orientation in which paper is loaded into the paper tray, specify the original direction (orientation of loading the original). Otherwise, part of the images on the original may not be printed. For details on the orientation of the original, refer to Chapter 4 of the [User's
Guide Copy Operations].
1-38 bizhub 215
1.17
Loading paper
1.17
Loading paper
Loading paper into Tray 1
1
Pull out Tray 1.
% Press the lifter plate down until it "clicks" into position.
2
1
1 Paper take-up roller
2 Lifter plate
NOTICE
Be careful not to touch the surface of the paper take-up roller with your hand.
2
Load the paper and adjust the lateral guide.
1 bizhub 215
% Slide the lateral guide to the size of the paper.
% Load the paper so that the side on which you want to print is facing up.
% Be sure to load the paper below the tab, so that the stack height does not exceed the , mark.
% Up to 250 sheets of plain paper can be loaded.
% Up to 20 sheets of thick paper can be loaded.
% Up to 10 OHP transparencies can be loaded.
% Up to 10 envelopes can be loaded.
d
Reference
For details on how to load paper into Tray 1, refer to Chapter 3 of the [User's Guide Copy Operations].
1-39
1 Loading paper 1.17
Loading paper into Tray 2, Tray 3, Tray 4, or Tray 5 (optional)
1
Pull out the tray.
% Press the lifter plate down until it "clicks" into position.
1
1 Lifter plate
2
Load the paper and adjust the lateral guide.
1-40
% Slide the lateral guide to the size of the paper.
% Load the paper so that the side on which you want to print is facing up.
% Be sure to load the paper below the tab, so that the stack height does not exceed the , mark.
% Up to 250 sheets of plain paper can be loaded.
% Special paper (thick paper, OHP transparencies, or envelopes) cannot be loaded.
d
Reference
For details on how to load paper into Tray 2, Tray 3, Tray 4, or Tray 5, refer to Chapter 3 of the [User's Guide
Copy Operations].
bizhub 215
1.17
Loading paper 1
Loading paper into the Bypass Tray (optional)
You can load plain paper, OHP transparencies, envelopes, or other paper in the Bypass Tray. The following describes the procedure for loading plain paper into the Bypass Tray.
Tips
If you load paper other than plain paper, you must specify the paper type on the Control Panel.
1
Load the paper and adjust the lateral guide.
% Load the paper so that the side to be used for copying is facing down.
% Be sure that all paper is flat before loading it.
% Slide the guide to the size of the paper.
% Do not load the sheets up to the point where the top of the stack is higher than the + mark.
% Up to 100 sheets of plain paper can be loaded.
% Up to 20 sheets of thick paper can be loaded.
% Up to 10 OHP transparencies can be loaded.
% Up to 10 envelopes can be loaded.
2
On the Control Panel, specify the paper.
bizhub 215
% Use +, to select [SIZE], then press ).
% Use +, to select the paper size, then press OK.
% Use +, to select [TYPE], then press ).
% Use +, to select the paper type, then press OK.
d
Reference
For details on how to load paper into the Bypass Tray, refer to Chapter 4 of the [User's Guide Copy Operations].
1-41
1 Removing a jam 1.18
1.18
Removing a jam
If a paper jam occurs in this machine, Error on the Control Panel lights up and a message appears. Be sure to see the Display to check the location of the jam before removing the jam.
A message indicating the location of the jam appears in the Display.
Message
[Open 1st side cover]
[Open 2nd side cover]
[Open 3rd side cover]
[Open 4th side cover]
[Open 5th side cover]
[Open doc. feed cover]
[Open duplex cover]
Location of the jam
• Inside the main unit
• Bypass Tray
• Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
ADF
Automatic Duplex Unit
1-42 bizhub 215
1.18
Removing a jam
Removing a paper jam in the main unit, Bypass Tray, or Tray1
The following describes the procedure for removing a paper jam in the main unit, Bypass Tray, or Tray 1.
1 bizhub 215
-
-
Tips
-
-
Areas around the fusing unit are hot. To prevent burns, do not touch any parts other than those specified in the procedure. If you touch a hot component, immediately cool the skin with cool water and consult a physician.
Touching the surface of the transfer roller can deteriorate the image quality of copies. Be careful not to touch the surface of the transfer roller with your hand.
When releasing the pressure-bonding lever, hold the green part of the lever.
Touching the surface of the PC drum can deteriorate the image quality of copies. Be careful not to touch the surface of the PC drum with your hand.
1-43
1 Removing a jam 1.18
Removing a paper jam in Tray 2, Tray 3, Tray 4, or Tray 5
The following describes the procedure for removing a paper jam from Tray 2, Tray 3, Tray 4, or Tray 5.
Tray 2 is used according to the following explanation. For Tray 3, Tray 4, and Tray 5, use the same procedure.
Removing a paper jam in the ADF
The following describes the procedure for removing a paper jam in the ADF.
1-44 bizhub 215
1.18
Removing a jam
Removing a jam in the Automatic Duplex Unit
The following describes the procedure for removing a paper jam in the Automatic Duplex Unit.
1 bizhub 215 1-45
1
1.19
Replacing consumables
Replacing consumables 1.19
Replacing the Toner Bottle
When toner becomes exhausted, Error on the Control Panel lights up and a message appears. When the message appears, replace the Toner Bottle with a new one.
1-46
Tips
-
-
-
For Toner Bottle, be sure to use a Toner Bottle dedicated for this machine. Use of another Toner Bot-
tle will result in a failure. For details, contact your service representative.
Your service representative collects empty Toner Bottle. Store empty toner bottles in the individual packaging box. Do not dispose of the bottles.
Before installing a new Toner Bottle, give it a good shake approximately 5 to 10 times from side to side and up and down.
bizhub 215
1.20
Option configuration
1.20
Option configuration
This section describes the options that can be installed on this machine.
By adding options, you will be able to meet the various requirements of your office.
1 bizhub 215
No.
1
2
3
4
5
6
7
Name
Main unit
Original Cover OC-512
Multi Bypass Tray MB-505
Paper Feeder Unit PF-507
Desk DK-706
Description
The original is scanned by the scanner section, and the scanned image is printed by the printer section.
The main unit is hereinafter referred to as "this machine",
"main unit", or bizhub 215 throughout this manual.
Fixes the loaded originals.
This unit is hereinafter referred to as the Original Cover throughout this manual.
Reverse Automatic Document
Feeder DF-625
Automatically feeds and scans originals by page.
This unit automatically reverses and scans 2-sided originals.
This unit is hereinafter referred to as the ADF through the manual.
Automatic Duplex Unit AD-509 This unit allows 1-sided printing or 2-sided printing of 2-sided original.
This is a multi manual paper feed unit that can hold up to 100 sheets. This unit is hereinafter referred to as Bypass Tray.
Up to 250 sheets can be loaded on this paper feeder unit.
Up to four trays can be added to this machine.
The unit is hereinafter referred to as Tray 2/Tray 3/Tray 4/
Tray 5.
This machine can be installed on this desk.
By using the desk, you can install this machine on the floor.
One tray can be added on this desk.
This desk is hereinafter referred to as the Desk throughout this manual.
1-47
1 Option configuration 1.20
No.
8
9
10
11
12
13
14
Name
Desk DK-707
Desk DK-708
Extended Operation Panel
MK-733
Image Controller IC-209
Network Card NC-504
*
*
FAX Kit FK-510
*
Mechanical Counter MC-504
*
Description
This machine can be installed on this desk.
By using the desk, you can install this machine on the floor.
Up to three trays can be added on this desk.
This desk is hereinafter referred to as the Desk throughout this manual.
This machine can be installed on this desk.
By using the desk, you can install this machine on the floor.
Up to four trays can be added to this desk.
This desk is hereinafter referred to as the Desk throughout this manual.
An address book registration number and address can be registered or recalled while using fax and scanning functions.
This is a built-in printer controller that enables you to;
• Use this machine as a PC printer (PCL or GDI); or
• Scan an original to send its data to a computer or send it as an E-mail attachment.
For details, refer to [User's Guide Print Operations].
This is a built-in network card that enables you to;
• Use this machine as a network printer; or
• Send the scanned original as an E-mail attachment to a computer.
For details, refer to the [User's Guide Network Administrator].
Allows this machine to function as a fax machine. Alternatively, it allows more telephone lines to be connected.
Displays the total number of copied/printed sheets.
*
Indicates a built-in option that is not shown in the above figure.
1-48 bizhub 215
2
2
2
2.1
Using as a Copy Machine
Copying an original
This section describes basic procedures for loading and copying an original.
1
Press Copy and load the original.
% For details on how to load the original, refer to page 1-37.
2
Specify the image quality.
Copying an original 2.1
% Use +, to select the correct setting, then press OK.
% For originals containing both text and a photo, select [TEXT/PHOTO].
% For originals containing only text, select [TEXT].
% For originals containing only photos, select [PHOTO].
3
Specify the density.
% Use +, to select the correct setting, then press OK.
% When you select [MANUAL], use *) to select the appropriate density, then press OK.
% In manual setting, you can select the density from nine different levels.
% You cannot specify the automatic density control and the [PHOTO] image quality setting at the same time.
4
Use the Keypad to specify the number of copies, then press Start.
% When you load the original onto the Original Glass, repeat Steps 1 to 4.
% To interrupt the copy operation being performed, press Clear/Stop. For details, refer to page 2-8.
2-2 bizhub 215
2.2
2.2
Enlarging or reducing the original to a different size 2
Enlarging or reducing the original to a different size
When the size of the original differs from the printing paper size, you can specify the zoom ratio for copying.
1
Press Copy and load the original.
% For details on how to load the original, refer to page 1-37.
2
Press Zoom, then select [FIXED].
% Use +, to select the correct zoom ratio, then press OK.
% Select the zoom ratio from 25%, 50%, 64%, 78%, 100%, 121%, 129%, 200%, and 400%.
% When you want to specify the zoom ratio from the Keypad, select [MANUAL].
3
Use the Keypad to specify the number of copies, then press Start.
% To interrupt the copy operation being performed, press Clear/Stop. For details, refer to page 2-8.
% When you load the original onto the Original Glass, repeat Steps 1 to 3.
Specifying the zoom ratio manually
Use +, to select [MANUAL], then press OK.
Use +,, or the Keypad to enter the value, then press OK.
Tips
Pressing Clear/Stop deletes the value you have entered.
d
Reference
For details on setting the portrait and landscape zoom ratios, refer to Chapter 4 of the [User's Guide Copy
Operations].
bizhub 215 2-3
2
2.3
Saving paper used for copying 2.3
Saving paper used for copying
This section describes procedures for printing on both sides of paper (2-sided copying) and for printing multiple reduced pages onto a single sheet (combined copying).
2-sided copying
When copying a large number of 1-sided originals, copying them onto both sides of each sheet reduces the amount of paper used by 50%.
The 2-sided copy function is available only when the optional Automatic Duplex Unit AD-509 is installed.
1
Press Copy and load the original.
% For details on how to load the original, refer to page 1-37.
2
Configure the settings for 2-sided copying.
% Use +, to select [1-SIDE
→
2-SIDE], and press OK.
% When you select [1-SIDE
→
2-SIDE] and press ), you can specify the binding position for the printed sheets.
Tips
For [1-SIDE
→
2-SIDE], [1-SIDE] refers to a 1-sided original, and [2-SIDE] refers to a 2-sided copy.
3
Use the Keypad to specify the number of copies, then press Start.
% To interrupt the copy operation being performed, press Clear/Stop. For details, refer to page 2-8.
% When you have loaded the original onto the Original Glass, go to Step 4.
4
When a message appears, load the next original then press OK.
2-4
5
When all originals have been scanned, press Start.
Tips
The number of scanned pages is displayed under the number of copies.
bizhub 215
2.3
Saving paper used for copying 2
Combined copying
The following describes the procedure for combining and printing multiple originals (two or four pages) onto a single page.
1
Press Copy and load the original.
% For details on how to load the original, refer to page 1-37.
2
Press Combine Original and select [2in1] or [4in1].
% When you select [2in1] and press ), you can specify the original direction.
% When you select [4in1] and press ), you can specify the page order. When you press ) next, you can specify the original direction.
3
Use the Keypad to specify the number of copies, then press Start.
% To interrupt the copy operation being performed, press Clear/Stop. For details, refer to page 2-8.
% When you have loaded the original onto the Original Glass, go to Step 4.
4
When a message appears, load the next original then press OK.
bizhub 215
5
When all originals have been scanned, press Start.
Tips
The number of scanned pages is displayed under the number of copies.
2-5
2
2.4
Copying on custom sized paper 2.4
Copying on custom sized paper
You can load custom sized paper into the Bypass Tray and Tray 1. As an example, this section describes procedures for loading paper into the Bypass Tray and copying the original onto the paper.
1
Press Copy and load the original.
% For details on how to load the original, refer to page 1-37.
2
Load paper into the Bypass Tray.
% Up to 100 sheets can be loaded into the Bypass Tray. Do not load the sheets of paper up to the point where the top of the stack is higher than the + mark.
% When paper is loaded into the Bypass Tray, a screen for selecting the paper in the bypass tray appears on the Control Panel. Go to Step 3 to configure the settings for the custom sized paper.
3
Configure the settings for the custom sized paper.
2-6
% Use +, to select [SIZE], then press ). (1)
% Use +, to select the correct setting, then press OK. (2)(6)
% Use the Keypad to specify the paper size, then press OK. (3)(4)
% Use +, to select [TYPE], then press ). (5)
% Press Back to return to the basic screen.
% If you are not sure about the size of the custom sized paper, measure the X and Y lengths using the
Original Scale.
4
Use the Keypad to specify the number of copies, then press Start.
d
Reference
For details on configuring the settings for paper in Tray 1, refer to Chapter 6 of the [User's Guide Copy Operations].
bizhub 215
2.5
2.5
Making copies on envelopes 2
Making copies on envelopes
You can load envelopes into the Bypass Tray and Tray 1. As an example, this section describes procedures for loading envelopes into the Bypass Tray and copying the original onto the envelopes.
1
Press Copy and load the original.
% For details on how to load the original, refer to page 1-37.
2
Load envelopes into the Bypass Tray.
% Load the envelopes with the flap side facing up, so that the side on which you want to copy the original is facing down.
% Up to 10 envelopes can be loaded into the Bypass Tray. Do not load the envelopes up to the point where the top of the stack is higher than the + mark.
% When envelopes are loaded into the Bypass Tray, a screen for specifying the paper appears on the
Control Panel. Go to Step 3 to configure the settings.
3
Configure the settings for the envelopes.
bizhub 215
% Use +, to select [SIZE], then press ). (1)
% Use +, to select the correct setting, then press OK. (2)
% Use the Keypad to specify the envelope size, then press OK. (3)(4)
% Use +, to select [TYPE ], press ) and select [ENVELOPE]. (5)(6)
% Press Back to return to the basic screen.
% If you are not sure about the size of the envelopes, measure the X and Y lengths using the Original
Scale.
4
Use the Keypad to specify the number of copies, then press Start.
d
Reference
For details on configuring the settings for paper in Tray 1, refer to Chapter 6 of the [User's Guide Copy Operations].
2-7
2
2.6
Canceling the ongoing copy operation
Canceling the ongoing copy operation
This section describes the procedure for canceling the copy operation that has been started by pressing
Start.
1
Configure the copy settings then press Start.
2
Press Clear/Stop during copy operation.
The [Please wait] message appears and the job stops.
3
Use +, to select [YES], then press OK.
2.6
% Selecting [NO] restarts the stopped job.
2-8 bizhub 215
3
3 Sending a fax 3.1
3
3.1
Using as a Fax Machine
Sending a fax
This section explains how to send a fax.
This machine supports the G3 fax function. Its sending and receiving are applicable only to G3-base remote machines.
1
Press Fax.
2
Load the original.
% For details on how to load the original, refer to page 1-37.
3
Specify the image quality.
% Use +, to select the correct setting, then press OK.
% When sending a photo original, select [STD/PHOTO], [FINE/PHOTO], or [S-FINE/PHOTO].
% If [S-FINE/TEXT] or [S-FINE/PHOTO] is selected, the original may not be sent as specified. In this case, the original is sent with [FINE/TEXT] or [STD/PHOTO].
% When [FINE/PHOTO] or [S-FINE/PHOTO] is specified, if the original size is larger than the paper size of the destination, the image quality may be degraded depending on the performance of the destination fax machine.
4
Specify the density.
% Use *) to specify the appropriate density, then press OK.
5
Enter a fax number using the Keypad, then press Start.
% In the Address Book, you can find numbers registered in One-touch Dial or the speed dial.
% When the desired number is registered in One-touch Dial, select the destination from One-touch Dial.
% To specify a number registered in the speed dial, press Speed Dial then specify the speed dial number using the Keypad.
% To interrupt the transmission, press Clear/Stop and select [YES] in the displayed screen. For de-
% When you have loaded the original onto the Original Glass, go to Step 6.
3-2 bizhub 215
3.1
Sending a fax
6
Use +, to select [AUTO DETECTION] or [MANUAL], then press OK.
% If [MANUAL] is selected, specify the paper size.
3
7
To start scanning, press OK.
8
When continuously scanning the original, load the next original, then press OK.
9
When scanning of all originals has been completed, press Start.
% To interrupt the transmission, press Clear/Stop and select [YES] in the displayed screen. For de-
bizhub 215 3-3
3
3.2
Sending a fax to multiple destinations at the same time 3.2
Sending a fax to multiple destinations at the same time
Sequential broadcast transmission
The original can be sent to multiple destinations by one operation. This function is referred to as a sequential broadcast transmission.
You can specify multiple destinations using two methods. One is to enter the destinations using the Keypad, and the other is to select them from those registered. You can combine these two methods.
1
Press Fax and load the original.
% For details on how to load the original, refer to page 1-37.
2
Specify the destinations.
% Use +, to select [BROADCAST], then press OK. (1)
% Specify a destination, then press OK. (2)
% Use +, to select [ADD], then press OK. (3)
% Repeat Steps (1) to (3) to specify all destinations.
% When you have specified all destinations, select [RETURN] then press OK. (4)
% To check the destinations, select [CHECK/EDIT].
3
Configure the other necessary settings then press Start.
% When you have loaded the original onto the Original Glass, specify the scanning size. For details,
% To interrupt the transmission, press Clear/Stop and select [YES] in the displayed screen. For de-
3-4 bizhub 215
3.3
3.3
Checking fax communication results
Checking fax communication results
After originals have been sent or received, communication result information (up to 60 items) are recorded.
1
Check the communication result.
3
% Use +, to select [TX/RX RESULT], then press OK.
% Use +, to view the desired communication result.
% To print a communication result report, press Start. After a communication result report has been printed, the basic screen appears.
2
Configure the settings for printing the report.
% Use +, to select [PRINT REPORT], then press OK.
% Use +, to select the report you want to output, then press OK or Start.
% The following paper sizes are supported for printing out a report.
5-1/2 e 8-1/2 v, 5-1/2 e 8-1/2 w/v, 8-1/2 e 11 w/v, 8-1/2 e 14 w, 11 e 17 w, A5 v, B5 w/v,
A4 w/v, B4 w, and A3 w
3
Press Start.
bizhub 215 3-5
3
3.4
Registering frequently used fax destinations 3.4
Registering frequently used fax destinations
You can register frequently used destinations. You can register destinations in the One-touch Dial, speed dial, group dial, and program dial. This section describes how to register destinations in the One-touch Dial and speed dial.
Registering destinations in One-touch Dial
Register a destination in One-touch Dial; you can specify a destination easily and accurately without entering a fax number using the Keypad.
1
Press Utility, and select [DIAL REGISTRATION].
% Use +, to select it, then press OK.
2
Select [ONE-TOUCH DIAL].
% Use +, to select it, then press OK.
% For details on how to register destinations in the group dial, refer to Chapter 7 of the [User's Guide
Fax Operations].
3
Press the One-Touch Dial Key to register a destination in.
% Up to 32 stations can be registered in One-touch Dial.
% When the LDAP setting has been configured, select [MANUAL SETTING].
3-6 bizhub 215
3.4
Registering frequently used fax destinations
4
Enter the name and fax number of the destination using the Keypad, then press OK.
3
% For how to enter characters, refer to page 3-9.
% To configure the F-Code TX, baud rate, or transmission time setting, refer to Chapter 7 of the [User's
Guide Fax Operations].
Registering destinations in the speed dial
Register a destination in the speed dial; you can specify a destination easily and accurately without entering a fax number using the Keypad.
1
Press Utility, and select [DIAL REGISTRATION].
% Use +, to select it, then press OK.
2
Select [SPEED DIAL].
% Use +, to select it, then press OK.
% For details on how to register destinations in the group dial, refer to Chapter 7 of the [User's Guide
Fax Operations].
3
Enter a desired 3-digit speed dial number using the Keypad, then press OK.
bizhub 215
% Up to 250 stations (001 to 250) can be registered in the speed dial.
% When the LDAP setting has been configured, select [MANUAL SETTING].
3-7
3 Registering frequently used fax destinations
4
Enter the name and fax number of the destination using the Keypad, then press OK.
3.4
% For how to enter characters, refer to page 3-9.
% To configure the F-Code TX, baud rate, or transmission time setting, refer to Chapter 7 of the [User's
Guide Fax Operations].
3-8 bizhub 215
3.5
3.5
Entering characters 3
Entering characters
Use A.../1... to select the character to be entered. You can enter numerals (1...) and alphabetical letters (A...).
Select and enter the character using the Keypad.
Entering characters using the Keypad
Example: Characters that can be entered by pressing 2
[1...]: For entering numerals
Number of times pressed 1
Character entered 2
[A...]: For entering characters
Number of times pressed 1
Character entered A
2
B
3
C
4
2
5 a
6 b
7 c
7
8
5
6
3
4
1
2
9
0
*
List of characters that can be entered from the Keypad
Keypad
#
8
9
6
7
0
*
4
5
2
3
Character entered
1...
1
#
A...
. (period), @, _ (underscore), - (hyphen), 1
A, B, C, 2, a, b, c
D, E, F, 3, d, e, f
G, H, I, 4, g, h, i
J, K, L, 5, j, k, l
M, N, O, 6, m, n, o
P, Q, R, S, 7, p, q, r, s
T, U, V, 8, t, u, v
W, X, Y, Z, 9, w, x, y, z
(space), 0
(+), &, /, *, =, !, ?, ( ), %, [ ], ^, `, ?, { }, |, ~, $, , (comma),
:, ;, <, >, "
#
Entering more than one character
bizhub 215
After entering a character, press *) to move the cursor.
After entering all necessary characters, press OK.
Tips
-
-
To delete all characters you have entered, press Back to return to the previous screen.
To delete one character, move the cursor to the character you want to delete, then press Clear/Stop.
3-9
3
3.6
Canceling the ongoing transmission 3.6
Canceling the ongoing transmission
This section describes procedures for stopping the transmission that has been started by pressing Start or for canceling the transmission during redialing.
1
Press Clear/Stop during transmission.
2
Use +, to select [YES], then press OK.
% Selecting [NO] restarts the fax transmission.
A transmission result report is printed out.
3-10 bizhub 215
3.7
3.7
Checking the registered destinations 3
Checking the registered destinations
You can print a list of destinations that are registered in the One-touch Dial or speed dial on this machine.
This section describes the procedure for printing a report on the destinations that are registered in this machine.
1
Check the registered destinations.
% Use +, to select [PRINT REPORT], then press OK.
% Select [ONE-TOUCH LIST] to check the destinations registered in the One-touch Dial list.
% Select [SPEED DIAL LIST] to check the destinations registered in the speed dial list.
% Select [KEY SETTING LIST] to check the settings of the group dial numbers and program dial numbers registered in the One-touch Dial keys.
% The following paper sizes are supported for printing out a report.
5-1/2 e 8-1/2 v, 5-1/2 e 8-1/2 w/v, 8-1/2 e 11 w/v, 8-1/2 e 14 w, 11 e 17 w, A5 v, B5 w/v,
A4 w/v, B4 w, and A3 w
2
Press Start.
bizhub 215 3-11
3
3.8
Sending data in the computer directly as a fax without leaving the desk 3.8
Sending data in the computer directly as a fax without leaving the desk
PC-FAX
You can send data created in your computer to a destination fax machine using an operation similar to that for printing the data.
To use the PC-FAX function, you must install the fax driver.
To perform PC-FAX TX, FAX Kit FK-510 and Extended Operation Panel MK-733 are required.
1
Select the fax driver from the [Print Menu] of applications, and click [Print].
3-12
% If necessary, click [Preferences] (or [Properties]), and configure the fax driver.
2
Specify the destination.
(1)
(3)
(2)
(4)
% To directly enter a destination, type the name and fax number into [Name] and [Fax Number], and
% To search for a destination in the address book, select a target from the list, then click
% Right-click the group name of the address book to display the users registered in the group.
. (2) (3) bizhub 215
3.8
Sending data in the computer directly as a fax without leaving the desk
3
To specify multiple destinations, repeat Step 2.
4
Click [OK]. (4)
3 bizhub 215 3-13
3
3.9
If you suspect a failure then do the following 3.9
If you suspect a failure then do the following
If fax transmission or reception fails, check the corresponding item in the following table.
Cannot send a fax correctly
Fax status
The original is not scanned.
The original is scanned obliquely.
An unclear image has been received at a destination.
A blank image has been received at a destination.
Cannot send a fax automatically.
Major cause
Is the original too thick?
Is the original too thin or small?
Is the Original Glass dirty?
Does the Lateral Guide match the original width?
Is the original positioned correctly?
Is the Original Glass dirty?
Is the original text too faint?
Is there a problem with the line status or destination fax?
Correction action
Load the original onto the Origi-
nal Glass. For details, refer to
[User's Guide Copy Operations].
Load the original onto the Origi-
nal Glass. For details, refer to
[User's Guide Copy Operations].
Wipe the Original Glass with a soft, dry cloth.
Adjust the Lateral Guide to the original width. For details, refer to [User's Guide Copy Operations].
Position the original correctly.
For details, refer to [User's Guide
Copy Operations].
Wipe the Original Glass with a soft, dry cloth.
Specify the scanning density. For details, refer to [User's Guide Fax
Operations].
Make a copy in this machine to check the result. If a copy image is clear, send a fax again.
Is the original loaded, turning down the original side to be sent? (in use of ADF)
Was there any problem at the recipient end? (Paper out, Auto RX is disabled, the power is not turned off, and other causes)
Load the original, turning up the original side to be sent. Then, send the original again. For details, refer to [User's Guide Copy
Operations].
Was the number called correct?
Check the number.
Did you call a telephone-dedicated number?
Check the number.
Check with the sender.
3-14 bizhub 215
3.9
If you suspect a failure then do the following
Cannot receive a fax correctly
Fax status Major cause
The received image is not clear.
Was the specified paper used?
Is the paper damp?
Is there a sufficient amount of toner?
Is there a problem with a destination fax?
Blank paper is received.
A fax is not received automatically.
Is there a sufficient amount of toner?
Did the sender load the original the wrong way?
Is Receive Mode set to Manual
RX?
Correction action
Use the specified paper.
Replace with new paper.
Install a new Toner Bottle. For
Make a copy in this machine to check the result. If a copy image is clear, ask the sender to send the fax again.
Install a new Toner Bottle. For
Check with the sender.
Black lines have been printed on the received paper.
Is the memory full?
Is a message displayed?
Is there a problem with a destination fax?
Set to Auto RX. For details, refer to [User's Guide Fax Operations].
If a paper out occurs, add paper and print out files saved in the memory.
Release the message as instructed in the screen.
Make a copy in this machine to check the result. If a copy image is clear, ask the sender to send the fax again.
3
Cannot call correctly
Fax status
No sound is heard through an external phone.
Cannot hear no tone after dialing.
Difficult to hear the recipient's voice in on-hook dial mode.
The phone ring volume is low or high.
Major cause
Is the telephone cord connected to this machine?
Is the line cable connected to this machine?
During communication.
Is the line type specified correctly?
Is the monitor volume low?
Is the ring volume of the external phone set to a low or high level?
Correction action
Connect the telephone cord to this machine.
Connect the line cable to this machine.
After a communication has ended, check the connection again.
Specify the correct line type. For details, refer to [User's Guide Fax
Operations].
Adjust the monitor volume to the higher level. For details, refer to
[User's Guide Fax Operations].
Adjust the ring volume of the external phone.
bizhub 215 3-15
3 If you suspect a failure then do the following 3.9
3-16 bizhub 215
4
4 Before Printing 4.1
4
4.1
4.2
Using as a Printer
Before Printing
To print from your computer, you must install the printer driver in your computer in advance.
You can easily install the printer driver using the installer contained on the accompanying CD-ROM.
d
Reference
For details on how to install the printer driver, refer to Chapter 3 of the [User's Guide Print Operations].
Printing
Printing data
The following describes the procedure for printing data in your computer from this machine.
1
In the software, select the Print menu.
2
Select the printer and open [Preferences] (or [Properties]).
4-2 bizhub 215
4.2
Printing
3
Configure the print settings then click [OK].
4
Click [Print].
4 bizhub 215 4-3
4
4.3
Enlarging or reducing the original to fit the paper size 4.3
Enlarging or reducing the original to fit the paper size
By specifying the paper size set for the data in the computer and the paper size to be set in the driver, you can enlarge or reduce the original to the paper size.
1
Select the printer and open [Preferences] (or [Properties]).
2
Select the original size.
4-4
% In [Original Size], specify the original size.
bizhub 215
4.3
Enlarging or reducing the original to fit the paper size
3
Specify the output paper size or zoom ratio.
4
% To specify the zoom ratio, select [Manual] and specify the zoom ratio.
4
Click [OK].
bizhub 215 4-5
4
4.4
Saving paper used for printing
2-sided printing
Documents can be printed on both sides of paper.
1
Select the printer and open [Preferences] (or [Properties]).
Saving paper used for printing 4.4
2
Configure the settings for 2-sided printing.
4-6
% Select [Layout] and configure the [Double Sided] setting.
% Selecting [Double Sided] prints the document on both sides of paper.
% Selecting [Single Sided] prints the document on one side of paper.
3
Click [OK].
bizhub 215
4.4
Saving paper used for printing
Combined printing
When printing multiple pages, you can select the number of pages to be printed onto a single sheet.
You can print 2, 4, 6, 9, or 16 pages of an original onto a single sheet.
1
Select the printer and open [Preferences] (or [Properties]).
4
2
Configure the settings for combined printing.
bizhub 215
% Select [Layout] and configure the [Combination] setting.
% To specify the detailed settings for combination, click [Combination Details...].
4-7
4 Saving paper used for printing 4.4
% In [Combination], you can specify the number of pages of the original to be printed on one page.
% In [Order], you can specify the order of combined pages.
% Select the [Border Line] check box to enclose each original page with a frame.
3
Click [OK].
4-8 bizhub 215
4.5
4.5
Printing on custom sized paper
Printing on custom sized paper
When printing on custom sized paper, load the paper into the Bypass Tray or Tray 1.
When using the Bypass Tray
1
Load paper.
4
% When the paper is loaded, a screen for specifying the paper in the Bypass Tray appears on the
Control Panel. Go to Step 2 to configure the settings for the custom sized paper.
2
Configure the settings for the custom sized paper.
bizhub 215
% Use +, to select [SIZE], then press ). (1)
% Use +, to select the correct setting, then press OK. (2)(6)
% Use the Keypad to enter the paper size, then press OK. (3)(4)
% Use +, to select [TYPE], then press ). (5)
% Press Back to return to the basic screen.
% If you are not sure about the size of the custom sized paper, measure the length (X) and width (Y) using the Original Scale.
3
Select the printer and open [Preferences] (or [Properties]).
4-9
4 Printing on custom sized paper 4.5
4-10
(1)
(2) bizhub 215
4.5
Printing on custom sized paper
(3)
(4)
(5)
(6)
(7)
(8)
4 bizhub 215 4-11
4 Printing on custom sized paper 4.5
% When the size of the loaded paper is not registered, select [Edit Custom] (1) and register the paper size specified in the main unit. Click [New] (2), enter the name in [Name] (3) and dimensions in [Dimensions] (4), then click [OK] (5). Select the registered paper size then click [OK] (6).
% In [Original Size] (7), select the custom sized paper that is registered.
% In [Paper Source], select [Bypass] (8).
% Check that [Paper Size] is set to the same size as the paper setting for the data to be printed.
4
Press [OK].
When using Tray 1
1
Load paper.
Y X
% If you are not sure about the size of the custom sized paper, measure the length (X) and width (Y) using the Original Scale.
2
Configure the settings for the custom sized paper.
4-12
% Use +, to select the correct setting, then press OK. (1)(2)(3)(4)(7)(8)(9)
% Use the Keypad to enter the paper size, then press OK. (5)(6)
% If you are not sure about the size of the custom sized paper, measure the length (X) and width (Y) using the Original Scale.
3
Select the printer and open [Preferences] (or [Properties]).
bizhub 215
4.5
Printing on custom sized paper 4 bizhub 215
(1)
(2)
4-13
4
4-14
Printing on custom sized paper 4.5
(3)
(4)
(5)
(6)
(7)
(8) bizhub 215
4.5
Printing on custom sized paper 4
% When the size of the loaded paper is not registered, select [Edit Custom] (1) and register the paper size specified in the main unit. Click [New] (2), enter the name in [Name] (3) and dimensions in [Dimensions] (4), then click [OK] (5). Select the registered paper size then click [OK] (6).
% In [Original Size] (7), select the custom sized paper that is registered.
% In [Paper Source], select [Tray 1] (8).
% Check that [Paper Size] is set to the same size as the paper setting for the data to be printed.
4
Click [OK].
bizhub 215 4-15
4
4.6
Printing on envelopes 4.6
Printing on envelopes
To print on envelopes, you need to specify the size and type of paper in Control Panel and select the envelope size in the data to be printed or in the printer driver.
When using the Bypass Tray
1
Load envelopes.
% Load the envelopes with the flap side facing up.
% Up to 10 envelopes can be loaded.
% When the paper is loaded, a screen for specifying the paper in the Bypass Tray appears on the
Control Panel. Go to Step 2 to configure the settings for the envelopes.
2
Configure the settings for the envelopes.
4-16
% Use +, to select [SIZE], then press ). (1)
% Use +, to select the correct setting, then press OK. (2)
% Use the Keypad to enter the paper size, then press OK. (3)(4)
% Use +, to select [TYPE], then select ). (5)
% Select [ENVELOPE]. (6)
% Press Back to return to the basic screen.
% If you are not sure about the size of the envelopes, measure the length (X) and width (Y) using the
Original Scale.
bizhub 215
4.6
Printing on envelopes
3
Select the printer and open [Preferences] (or [Properties]).
4
(1) bizhub 215 4-17
4 Printing on envelopes 4.6
(2)
(3)
4-18
% The envelope sizes registered in the printer driver are [Env.Com10], [Env.C6 3/4], [Env.C6], and
[Env.DL].
% In [Original Size], select the envelope size. (1)
% In [Paper Source], select [Bypass]. (2)
% In [Paper Type], select [Envelope Paper]. (3)
% Check that [Paper Size] is set to the same size as the paper setting for the data to be printed.
4
Click [OK].
bizhub 215
4.6
Printing on envelopes
When using Tray 1
1
Load envelopes.
% Load them with the side you want to print facing up.
% Up to 10 envelopes can be loaded.
2
Configure the settings for the envelopes.
4 bizhub 215
% Use +, to select the correct setting, then press OK. (1)(2)(3)(4)(7)(8)(9)
% Use the Keypad to enter the paper size, then press OK. (5)(6)
% If you are not sure about the size of the envelopes, measure the length (X) and width (Y) using the
Original Scale.
4-19
4
3
Select the printer and open [Preferences] (or [Properties]).
Printing on envelopes 4.6
(1)
4-20 bizhub 215
4.6
Printing on envelopes
(2)
4
(3) bizhub 215
% The envelope sizes registered in the printer driver are [Env.Com10], [Env.C6 3/4], [Env.C6], and
[Env.DL].
% In [Original Size], select the envelope size. (1)
% In [Paper Source], select [Tray 1]. (2)
% In [Paper Type], select [Envelope Paper]. (3)
% Check that [Paper Size] is set to the same size as the paper setting for the data to be printed.
4
Click [OK].
4-21
4 Printing on envelopes 4.6
4-22 bizhub 215
5
5 Sending scanned data 5.1
5
5.1
Using as a Scanner
Sending scanned data
Scanned data can be sent via an E-mail or to the FTP or SMB server.
To send scanned data, Extended Operation Panel MK-733 combined with Network Card NC-504 or Im-
age Controller IC-209 is required.
Sending an E-mail
The following describes the procedure for sending scanned data via an E-mail.
1
Press Scan.
2
Load the original.
% For details on how to load the original, refer to page 1-37.
3
Specify the resolution setting.
% Use +, to select the correct setting, then press OK.
% Select [150e150dpi], [300e300dpi], or [600e600dpi].
% When [Color] or [Gray] is specified for the color setting, [600e600dpi] is not displayed.
4
Specify the color setting.
% Use +, to select the correct setting, then press OK.
% Select [BW], [GRAY], or [COLOR].
% If [BW] is selected with [Image Format] set to [JPEG], [PDF] is automatically selected.
5-2 bizhub 215
5.1
Sending scanned data
5
Specify the image quality.
5
% Use +, to select the correct setting, then press OK.
% Select [TEXT/PHOTO], [TEXT], or [PHOTO].
6
Enter the E-mail address using the Keypad, then press Start.
% The subject, CC address, file format, and compression coding method can be specified.
% One-touch Dial can be used to select the destination.
% The speed dial can be used to select the destination.
% The phone book can be used to select the destination.
% To interrupt the transmission, press Clear/Stop then select [YES] in the displayed screen. For de-
% For details on each setting, refer to Chapter 5 of the [User's Guide Scan Operations].
% When you have loaded the original onto the Original Glass, go to Step 7.
7
Use +, to select [AUTO DETECTION] or [MANUAL], then press OK.
% When you select [MANUAL], you can specify the scanning size.
8
To start scanning, press OK.
9
When continuously scanning the original, load the next original, then press OK.
10
When scanning of all originals has been completed, press Start.
% To interrupt the transmission, press Clear/Stop and select [YES] in the displayed screen. For de-
bizhub 215 5-3
5 Sending scanned data
Sending scanned data to the FTP/SMB server
The following describes the procedure for sending scanned data to the FTP/SMB server.
1
Press Scan.
2
Load the original.
% For details on how to load the original, refer to page 1-37.
3
Specify the resolution setting.
5.1
5-4
% Use +, to select the correct setting, then press OK.
% Select [150e150dpi], [300e300dpi], or [600e600dpi].
% When [Color] or [Gray] is specified for the color setting, [600e600dpi] is not displayed.
4
Specify the color setting.
% Use +, to select the correct setting, then press OK.
% Select [BW], [GRAY], or [COLOR].
% If [BW] is selected with [Image Format] set to [JPEG], [PDF] is automatically selected.
5
Specify the image quality.
% Use +, to select the correct setting, then press OK.
% Select [TEXT/PHOTO], [TEXT], or [PHOTO].
bizhub 215
5.1
Sending scanned data
6
Press Speed Dial. Enter a 3-digit dial number using the Keypad, then press OK.
5
% Before sending data to the server, register the FTP/SMB server address using a number between
[251 and 300] on the speed dial.
% The file format and compression coding method can be specified. For details, refer to Chapter 6 of the [User's Guide Scan Operations].
7
Press Start.
% To interrupt the transmission, press Clear/Stop then select [YES] in the displayed screen. For de-
% When you have loaded the original onto the Original Glass, go to Step 8.
8
Use +, to select [AUTO DETECTION] or [MANUAL], then press OK.
% When you select [MANUAL], you can specify the scanning size.
9
To start scanning, press OK.
10
When continuously scanning the original, load the next original, then press OK.
11
When scanning of all originals has been completed, press Start.
% To interrupt the transmission, press Clear/Stop and select [YES] in the displayed screen. For de-
bizhub 215 5-5
5
5.2
Registering frequently used destinations 5.2
Registering frequently used destinations
You can register frequently used destinations. You can register destinations in the One-touch Dial, speed dial, group dial, and program dial. This section describes how to register destinations in the One-touch Dial and speed dial.
Registering destinations in One-touch Dial
Register a destination in One-touch Dial; you can specify a destination easily and accurately without entering an E-mail address using the Keypad.
1
Press Utility, and select [DIAL REGISTRATION].
% Use +, to select it, then press OK.
2
Select [ONE-TOUCH DIAL].
% Use +, to select it, then press OK.
3
Press the One-Touch Dial Key to register a destination in.
5-6
% Up to 32 stations can be registered in One-touch Dial.
% When the LDAP setting has been configured, select [MANUAL SETTING].
bizhub 215
5.2
Registering frequently used destinations
4
Enter the name and E-mail address of the destination using the Keypad, then press OK .
5
% You can specify the transmission size, resolution, and other settings. For details, refer to Chapter 4 of the [User's Guide Scan Operations].
bizhub 215 5-7
5 Registering frequently used destinations 5.2
Registering destinations in the speed dial
Register a destination in the speed dial; you can specify a destination easily and accurately without entering an E-mail address using the Keypad.
1
Press Utility, and select [DIAL REGISTRATION].
% Use +, to select it, then press OK.
2
Select [SPEED DIAL].
% Use +, to select it, then press OK.
3
Enter a desired 3-digit speed dial number using the Keypad, then press OK.
% Up to 250 stations (001 to 250) can be registered in the speed dial.
% When the LDAP setting has been configured, select [MANUAL SETTING].
5-8 bizhub 215
5.2
Registering frequently used destinations
4
Enter the name and E-mail address of the destination using the Keypad, then press OK .
5
% To specify the transmission size, resolution, or other settings, refer to Chapter 4 of the [User's Guide
Scan Operations].
bizhub 215 5-9
5
5.3
Canceling the ongoing transmission 5.3
Canceling the ongoing transmission
This section describes the procedure for stopping the transmission that has been started by pressing Start.
1
Press Clear/Stop during transmission.
2
Use +, to select [YES], then press OK.
% Selecting [NO] restarts the transmission of the scanned data.
A transmission result report is printed out.
5-10 bizhub 215
5.4
5.4
How to use Scan to USB 5
How to use Scan to USB
This chapter describes how to store scanned data on the USB memory.
1
Load the original.
% For details on how to load the original, refer to page 1-37.
2
When a USB memory device is connected to this machine, the machine mode changes to scan mode and [TO: Scan to USB Memory] is displayed.
bizhub 215
% The file format and compression coding method can be specified. For details, refer to Chapter 7 of the [User's Guide Scan Operations].
3
Specify the resolution setting.
% Use +, to select the correct setting, then press OK.
% Select [150e150dpi], [300e300dpi], or [600e600dpi].
% When [Color] or [Gray] is specified for the color setting, [600e600dpi] is not displayed.
5-11
5
4
Specify the color setting.
How to use Scan to USB 5.4
% Use +, to select the correct setting, then press OK.
% Select [BW], [GRAY], or [COLOR].
% If [BW] is selected with [Image Format] set to [JPEG], [PDF] is automatically selected.
5
Specify the image quality.
% Use +, to select the correct setting, then press OK.
% Select [TEXT/PHOTO], [TEXT], or [PHOTO].
6
Press Start.
Scanned original is stored in the USB memory.
% When you have loaded the original onto the Original Glass, go to Step 7.
7
Use +, to select [AUTO DETECTION] or [MANUAL], then press OK.
% When you select [MANUAL], you can specify the scanning size.
5-12
8
To start scanning, press OK.
9
When continuously scanning the original, load the next original, then press OK.
10
When scanning of all originals has been completed, press Start.
% To interrupt the transmission, press Clear/Stop then select [YES] in the displayed screen. For de-
bizhub 215
5.5
5.5
Scanning using a TWAIN driver 5
Scanning using a TWAIN driver
When a TWAIN driver is installed in your computer, you can use this machine to scan originals as data and import it into the computer.
In the "Pull Scan" method, scanning is started from the computer screen, and in the "Push Scan" method, scanning is started by pressing START on this machine.
The operation method differs depending on the application to be used.
1
Load the original.
% For details on how to load the original, refer to page 1-37.
2
Start the image processing application on the computer side.
3
Configure the scanning settings.
(1)
(2)
(3)
(4)
(5)
% In [Document Size], specify the size of the original to be scanned. (1)
If the image to be scanned is greater than the size specified in Original Size, the areas outside the specified size are deleted.
% In [Scan Mode], specify the image quality of the original. (2)
Switching [Scan Mode] displays icons. Press these icons to specify the color brightness or contrast.
% In [Resolution], specify the resolution. (3)
If [Scan Mode] is set to [Full Color] or [Gray], [600dpix600dpi] is not displayed.
% In [Scan Type], specify the scanning method. (4)
% In [Duplex Scanning], turn on or off the 2-sided scanning function. (5)
[Duplex Scanning] is displayed when the optional ADF is installed.
% Click [Prescan] to display the scanned original in the pre-scan window.
bizhub 215 5-13
5
4
Scan the original.
% For Pull Scan, click [Scan]. Scanning starts.
Scanning using a TWAIN driver 5.5
% For Push Scan, press [Scan] then press Start on the Control Panel. Scanning starts.
5-14 bizhub 215
5.6
5.6
Scanning using a WIA driver
Scanning using a WIA driver
Scanning is enabled using an application that supports WIA.
The operation method differs depending on the application to be used.
1
Load the original.
% For details on how to load the original, refer to page 1-37.
2
Start the image processing application on the computer side.
3
Configure the scanning settings.
5
% In [Paper source], select the scanning method for the original.
% Select the type of the image to be scanned.
% Using [Select an option below for the type of picture you want to scan.], you can specify the image quality.
% Click [Preview] to display the scanning result.
4
Click [Scan].
Scanning starts.
bizhub 215 5-15
5 Scanning using a WIA driver 5.6
5-16 bizhub 215
6
6
6 Troubleshooting
This chapter describes troubleshooting operations against typical problems.
If the problem is not corrected after the described operation is performed, contact your service representative.
The power does not turn on
Check the following:
-
-
Check that the power cord of this machine is correctly plugged into an outlet. Also check that the circuit breaker is not tripped.
Check that the power switch is turned on.
Tips
If the power still does not turn on after checking, contact your service representative.
A message prompting you to replace consumables has appeared
When the remaining amount of a consumable item becomes low, a message is displayed to inform you of when to carry out a replacement.
A message prompting replacement means that consumables are nearly exhausted. You can make several copies after the message is displayed. However, we recommend that you procure consumables before you need to use them.
Tips
If the message remains displayed after replacement, contact your service representative.
6-2 bizhub 215
bizhub 215
6
The paper jam message does not disappear
Another paper jam may have occurred in a location other than that indicated in the Display.
Check the locations other than that indicated in the Display.
Check whether a piece of paper has not been removed from a deeper area of the location indicated in the Display. If it is difficult for you to remove the jammed paper, do not try too hard. Contact your service representative.
The door may not be closed correctly. Open and close the door again in the location indicated in the
Display. Doing this may cause the message to disappear.
Tips
If the paper jam message still persists after checking, contact your service representative.
An error message has appeared
If there is a problem that cannot be remedied by the customer, the [MACHINE TROUBLE SERVICE CALL
(C####)] message appears.
In the Service Call screen, an error code that usually begins with C appears.
If this message appears in the Display, turn off the power switch, wait for about 10 seconds, then turn on the power switch again.
If the message remains displayed, check the error code displayed in the Display, disconnect the power cord from the outlet, then contact your service representative.
6-3
6
6-4 bizhub 215
7
7
7 Utility
10
11
12
13
8
9
6
7
In Utility, you can specify the default value of each function to meet your conditions or environment.
To change the settings, press Utility on the Control Panel.
No.
1
2
3
4
Name
[MACHINE SETTING]
[PAPER SOURCE SET-
UP]
[CUSTOM SIZE MEMO-
RY]
[DRUM DEHUMIDIFY]
Description
Configure the settings for the operating environment of this machine.
Specify the size and type of the paper loaded in Tray 1. You can also specify the unit of paper size and paper type loaded in Tray2-Tray5.
Register up to two custom sizes.
5
Performs the drum drying operation to remove dew condensation around the PC of the photo conductor, preventing deterioration of functions.
Configure the remote monitor settings or settings for the administrator to manage each account.
Configure the default settings for each copy function.
[ADMIN. MANAGE-
MENT]
[COPY SETTING 1]
[COPY SETTING 2]
[DIAL REGISTRATION]
[FAX REGISTRATION]
[FAX TX OPERATION]
[FAX RX OPERATION]
[REPORTING]
[SCAN SETTING]
Register destinations in One-touch Dial, speed dial, and group dial.
Configure the default settings for each fax function.
Configure the default settings for transmission operations.
Configure the default settings for receiving operations.
Configure the default settings for each report function.
Configure the default settings for the scan function.
Tips
-
-
Some items cannot be configured depending on which optional device is installed in this machine. If an unavailable item is selected, an error message appears.
For details, refer to the relevant operation guide.
7-2 bizhub 215
8
8
8 Index
Numerics
2-sided Copy
...............................................................2-4
2-Sided Print
...............................................................4-6
A
Access
.......................................................................1-33
AddressBook
.............................................................1-34
ADF
............................................................................1-37
Auto RX Indicator
......................................................1-34
Automatic Duplex Unit AD-509
.................................1-47
B
Bypass Tray
...............................................................1-41
C
Clear/Stop
.................................................................1-33
Combine Original
.......................................................1-32
Combined Copy
..........................................................2-5
Combined Print
...........................................................4-7
Confirm
......................................................................1-32
Control Panel
.............................................................1-32
Copy
..................................................................1-34
Custom Size Copy
......................................................2-6
Custom Size Print
........................................................4-9
D
Density
......................................................................1-32
Desk DK-706
.............................................................1-47
Desk DK-707
.............................................................1-48
Desk DK-708
.............................................................1-48
Destination settings
...................................................3-11
Display
.......................................................................1-32
E
E-Mail TX
.....................................................................5-2
Entering characters
.....................................................3-9
Envelope
............................................................2-7
Extended Operation Panel MK-733
..........................1-48
F
Fax
.............................................................................1-34
Fax communication results
.........................................3-5
FAX Kit FK-510
..........................................................1-48
Finishing
....................................................................1-32
Fixed Zoom
.................................................................2-3
FTP/SMB TX
................................................................5-4
Function
....................................................................1-32
I
ID Copy
.....................................................................1-32
Image Controller IC-209
............................................1-48
K
Keypad
......................................................................1-33
L
Loading paper
...........................................................1-39
M
Main unit
....................................................................1-47
Manual Zoom
..............................................................2-3
Mechanical Counter MC-504
....................................1-48
Memory TX
................................................................1-34
Mixed Original
...........................................................1-32
Mode Memory
...........................................................1-32
N
Network Card NC-504
...............................................1-48
O
On Hook
....................................................................1-34
One-Touch Dial Key
..................................................1-34
Option configuration
..................................................1-47
Original Cover OC-512
..............................................1-47
Original Glass
............................................................1-37
Original Set
................................................................1-37
P
Paper
.........................................................................1-32
Paper Feeder Unit PF-507
.........................................1-47
PC-FAX
......................................................................3-12
Power Save
...............................................................1-33
.............................................................................4-2
Printer
........................................................................1-33
Printer Indicator
.........................................................1-33
Q
Quality
.......................................................................1-32
R
Redial/Pause
.............................................................1-34
Registering the one-touch dial
........................... 3-6
Registering the speed dial
.................................. 3-7
Removing a jam
.........................................................1-42
Removing a jam in the Automatic Duplex Unit
Replacing consumables
............................................1-46
Reset
.........................................................................1-33
Reverse Automatic Document Feeder DF-625
S
Scale Printing
..............................................................4-4
Scan
..........................................................................1-34
Scan to USB
..............................................................5-11
Sending a fax
...............................................................3-2
Sending scanned data
.................................................5-2
Sequential broadcast transmission
.............................3-4
Simplex/Duplex
.........................................................1-32
Speed Dial
.................................................................1-34
Start
...........................................................................1-33
8-2 bizhub 215
Stopping fax transmission
.........................................3-10
Stopping scanned data transmission
Stopping the copy operation
.......................................2-8
Switching Plate
..........................................................1-34
T
Tray 1
........................................................................1-39
Tray 2
........................................................................1-40
Tray 3
........................................................................1-40
Tray 4
........................................................................1-40
Tray 5
........................................................................1-40
Troubleshooting
..........................................................6-2
Turning the power on/off
...........................................1-36
TWAIN driver
.............................................................5-13
U
Utility
.................................................................1-32
W
WIA driver
..................................................................5-15
Z
Zoom
...............................................................1-32
8 bizhub 215 8-3
8
8-4 bizhub 215
http://konicaminolta.com
A3PE-9585-00
P/N:1BS0830401 2011
Copyright Printed in China
2011.10
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project