OSD MANUAL Warning (V1.0) 1.IMAGE SATURATION: Adjust the color depth degrees or brilliance of the light. BRIGHTNESS: users can adjust it from 70-250. MIRROR: Please read this manual carefully before installation and use! 3D-NR: adopts fully digitalized 3D noise reduction technology to minimize noise. AE MODE:According to the environmental brightness, select the appropriate brightness compensation mode:CENTER WEIGHT;BLACK LIGHT;FRONT LIGHT;DISTINGUISH;GLOBAL;CENTER. OSD CONTROL BY FIVE SWITCH ZOOM IN: MIRROR:This function is used to achieve picture horizontal reverse. FLIP: IMAGE ENHANCE: OSD CONTROL BY ONE SWITCH SET：push [ SET ] 3 SECOND into Main Menu aways. UP/DOWN：[ UP ] or [ DOWN ] for move up and down. LEFT/RIGHT：[ LEFT ] or [ RIGHT ] for modifying the menu parameters. 1.Press Set key to show the OSD Main Menu, 2.Select different menu content by UP and DOWN button 3.Through the left (LEFT) or right (RIGHT) button to change the selection of different modes. 4.Chose EXIT and press SET key to end the setting. SHARPNESS:Image plane definition and an indicator of image edge sharpness; CONTRAST:Image is the brightest white and light and dark areas in the regulation of different brightness levels between the dark black. ON: Open the image reversal function. OFF: close ‘FLIP’ function. 1 2.DAY/NIGHT 4.ZONE MASKING 6.LANGUAGE LANGUAGE:Chinese, English; Auto: Select this, the camera will show color image in high lux and will auto change intoblack/white image in low lux. IR-CUT:Switches between Color picture and Black & White picture as an External Day/Night Switching Signal is received. COLOR:Selects the color of the screen area. AREA:it contains 8 privacy zones,Choose need privacy masking area 7.LOAD DEFAULT Menu restore to factory default. 3.WB SENSITIVITY:Select the appropriate sensitivity. AREA:It contains four privacy area, choose need motion detecting area. 3 8.SOFT VERION Software version number 9.SAVE & EXIT 5.DIRECTION The camera can adjust the white balance automatically according to the color temperature range. 2 Exit Menu.When you set up the menu, must move to the last item on the menu to save out of, or change is invalid. 10.Function & Parameter Images can be enlarged,users can adjust it from 50-100.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project