B&B Electronics USB-4751/4751L Network Card User manual

Add to my manuals
24 Pages

advertisement

B&B Electronics USB-4751/4751L Network Card User manual | Manualzz

USB-4751/4751L

48/24-Channel Digital

Input/Output USB Module

User Manual

Copyright

The documentation and the software included with this product are copyrighted 2006 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Part No. 2003475100

Printed in Taiwan

USB-4751/4751L User Manual ii

1st Edition

September 2006

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1.

Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.

2.

Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.

3.

If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly.

4.

Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.

5.

Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

iii

CE

This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, application software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Document Feedback

To assist us in making improvements to this manual, we would welcome comments and constructive criticism. Please send all such - in writing to: [email protected]

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from damage.

1.

To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on.

2.

Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components.

USB-4751/4751L User Manual iv

Contents

Chapter 1 Introduction ..................................................... 2

1.1

Hardware Features............................................................. 2

1.2

Software Overview............................................................ 3

1.2.1

More on the CD ............................................................. 3

Chapter 2 Installation ....................................................... 6

2.1

Unpacking ......................................................................... 6

2.2

Driver Installation ............................................................. 7

2.3

Hardware Installation ........................................................ 9

2.4

Hardware Uninstallation ................................................... 9

Figure 2.1:Unplug or Eject Hardware Dialog .............. 10

Figure 2.2:Stop a Hardware device dialog box ............ 10

Chapter 3 Signal Connections ........................................ 12

3.1

Overview ......................................................................... 12

3.2

I/O Connectors ................................................................ 12

3.2.1

Pin Assignments .......................................................... 12

Figure 3.1:I/O Connector Pin Assignment .................. 12

Figure 3.2:Opto-22 CN1/CN2 ..................................... 13

3.2.2

I/O Connector Signal Description ................................ 14

Table 3.1:I/O Connector Signal Description ............... 14

3.2.3

LED Indicator Status Description ................................ 14

Table 3.2:LED Indicator Status Description ................ 14

3.3

Digital I/O Connections .................................................. 15

3.3.1

Dry Contact Support for Digital Input ......................... 15

Figure 3.3:Digital Input Connections .......................... 15

3.4

Field Wiring Considerations ........................................... 16

Appendix A Specifications ................................................. 18

A.1

Digital Input/Output ........................................................ 18

A.2

Counter ............................................................................ 18

A.3

General ............................................................................ 18

v Table of Contents

USB-4751/4751L User Manual vi

2

Introduction

Sections include:

• Hardware Features

• Software Overview

1

Chapter 1 Introduction

Thank you for buying the Advantech’s USB-4751/4751L data acquisition module. The Advantech USB-4751/4751L is a powerful data acquisition

(DAS) module for the USB port. It features a unique circuit design and complete functions for data acquisition and control.

1.1 Hardware Features

USB-4751/4751L features excellent measurement & control functions:

• 48/24 TTL digital I/O lines

• 50-pin Opto-22 compatible box header

• Emulates mode 0 of 8255 PPI

• Buffered circuits for higher driving capacity than 8255

• Interrupt handling

• Timer/ Counter interrupt capability

• Supports both dry and wet contact

• 50-pin Opto-22 compatible box header

• Compatible with USB 1.1/2.0

• Bus-powered

Note: You can install up to sixteen USB-4751/4751L’s to a system because of the restriction of device

BoardID

Note:

Note:

The power output of an USB port is 500 mA, while the USB-4751/4751L requires 500mA

(Max.). This means that if an USB hub is used, it will need an external power supply to support more than one USB-4751/4751L device.

For detailed specifications of USB-4751/4751L, please refer to Appendix A, Specifications.

USB-4751/4751L User Manual 2

1.2 Software Overview

Advantech offers a rich set of DLL drivers, third-party driver support and application software on the companion CD-ROM to help fully exploit the functions of your device. Advantech’s Device Drivers feature a complete

I/O function library to help boost your application performance and work seamlessly with development tools such as Visual C++, Visual Basic,

Inprise C++ Builder, and Inprise Delphi.

1.2.1 More on the CD

For instructions on how to begin programming in each development tool,

Advantech offers some tutorial chapters in the Device Drivers Manual for your reference. Please refer to the corresponding sections in these chapters on the Device Drivers Manual to begin your programming efforts.

You can also look at the example source code provided for each programming tool, since they can get you very well oriented.

The Device Drivers Manual can be found on the companion CD-ROM.

Alternatively, if you have already installed the Device Drivers on your system, The Device Drivers Manual can be readily accessed through the

Start button:

Start/Programs/Advantech Automation/Advantech Device Manager /

Device Driver’s Manual

The example source code can be found under the corresponding installation folder such as the default installation path:

\Program Files\Advantech\ADSAPI\Examples

3 Chapter 1

USB-4751/4751L User Manual 4

2

Installation

Sections include:

• Unpacking

• Driver Installation

• Hardware Installation

• Hardware Uninstallation

2

Chapter 2 Installation

2.1 Unpacking

After receiving your USB-4751/4751L package, please inspect its contents first. The package should contain the following items:

• USB-4751/4751L Module

• Shielded USB 2.0 Cable (1.8 m)

• Companion CD-ROM (DLL driver included)

• User Manual

The USB-4751/4751L Module harbors certain electronic components vulnerable to electrostatic discharge (ESD). ESD could easily damage the integrated circuits and certain components if preventive measures are not carefully paid attention to. Before removing the module from the

antistatic plastic bag, you should take following precautions to ward off possible ESD damage:

• Touch the metal part of your computer chassis with your hand to discharge static electricity accumulated on your body. One can also use a grounding strap.

• Make contact between the antistatic bag and ground before opening.

After taking out the module, you should first:

Inspect the module for any possible signs of external damage (loose or damaged components, etc.). If the module is visibly damaged, please notify our service department or our local sales representative immediately. Avoid using a damaged module with your system.

• Avoid physical contact with materials that could hold static electricity such as plastic, vinyl and Styrofoam.

USB-4751/4751L User Manual 6

2.2 Driver Installation

We recommend you install the software driver before you install the

USB-4751/4751L module into your system, since this will guarantee a smooth installation process.

The 32-bit DLL driver Setup program for the USB-4751/4751L module is included on the companion CD-ROM that is shipped with your module package. Please follow the steps on the following page to install the driver software:

7 Chapter 2

For further information on driver-related issues, an online version of the

Device Drivers Manual is available by accessing the following path:

Start\Programs\Advantech Automation

\Device Manager\Device Driver’s Manual

USB-4751/4751L User Manual 8

2.3 Hardware Installation

Note: Make sure you have installed the software driver before you install the module (please refer to

Section 2.2 Driver Installation)

After the DLL driver installation is completed, you can now go on to install the USB-4751/4751L module in any USB port that supports the

USB 1.1/2.0 standard, on your computer. Please follow the steps below to install the module on your system.

Step 1: Touch the metal part on the surface of your computer to neutralize the static electricity that might be in your body.

Step 2: Plug your USB module into the selected USB port. Use of excessive force must be avoided; otherwise the module might get damaged.

Note: In case you installed the module without installing the DLL driver, Win2000/XP will recognize your module as an “unknown device”. After reboot,it will prompt you to provide necessary driver. You should ignore the prompting messages and set up the driver according to the steps described in Sec.2.2.

After your module is installed, you can configure it using the Advantech

Device Manager. The Device Driver's Manual can be found at:

Start\Programs\Advantech Automation\Advantech Device Manager\Device Driver’s Manual

2.4 Hardware Uninstallation

Though the Advantech USB modules are hot swappable, we still recommend you to follow the hardware un-installation procedure to avoid any unpredictable damages to your device or your system.

Step1: Close the applications of the USB module.

Step2: Right click the “Unplug or Eject Hardware” icon on your task bar.

9 Chapter 2

Figure 2.1: Unplug or Eject Hardware Dialog

Step3: Select “Advantech USB-4751/L Device” and press “Stop” Button.

Figure 2.2: Stop a Hardware device dialog box

Step4: Unplug your USB device from the USB port.

Note: Please make sure that you have closed the application before unplugging the USB device, otherwise unexpected system error or damage may occur.

USB-4751/4751L User Manual 10

2

Signal Connections

Sections include:

• Overview

• Digital I/O Connections

• Field Wiring Considerations

3

Chapter 3 Signal Connections

3.1 Overview

Maintaining good signal connections is one of the most important factors in ensuring that your application system is sending and receiving data correctly. A good signal connection can avoid unnecessary and costly damage to your PC and other hardware devices.

3.2 I/O Connectors

USB-4751/4751L is equipped with one plug-in screw-terminal connector and two (one for USB-4751L) standard Opto-22 connectors that can be used with a variety of Advantech's wiring boards.

3.2.1 Pin Assignments

Figure 3.1: I/O Connector Pin Assignment

USB-4751/4751L User Manual 12

Figure 3.2: Opto-22 CN1/CN2

Opto-22 CN1 Opto-22 CN2 (USB-4751 Only)

1

3

5

PC07

PC06

PC05

7

9

PC04

PC03

11 PC02

13 PC01

15 PC00

17 PB07

19 PB06

21 PB05

23 PB04

25 PB03

27 PB02

29 PB01

31 PB00

33 PA07

35 PA06

37 PA05

39 PA04

41 PA03

43 PA02

45 PA01

32

34

36

38

40

42

44

46

GND

GND

GND

GND

GND

GND

GND

GND

47 PA00 48 GND

49 +5V_OUT 50 GND

2

4

6

GND 1

GND

GND

3

5

8 GND

10 GND

12 GND

14 GND

PC17

PC16

PC15

7

9

PC14

PC13

11 PC12

13 PC11

16 GND

18 GND

20 GND

22 GND

24 GND

26 GND

28 GND

30 GND

15

17

19

21

23

25

27

29

PC10

PB17

PB16

PB15

PB14

PB13

PB12

PB11

31

33

35

37

39

41

43

45

47

49

PB10

PA17

PA16

PA15

PA14

PA13

PA12

PA11

PA10

+5V_OUT

32 GND

34 GND

36 GND

38 GND

40 GND

42 GND

44 GND

46 GND

48 GND

50 GND

2 GND

4 GND

6 GND

8 GND

10 GND

12 GND

14 GND

16 GND

18 GND

20 GND

22 GND

24 GND

26 GND

28 GND

30 GND

13 Chapter 3

3.2.2 I/O Connector Signal Description

Table 3.1: I/O Connector Signal Description

Signal Ref.

Direction Description

PA<0~7,

10~17>

PB<0~7,

10~17>

GND Input/Output

GND Input/Output

PC<0~7,

10~17>

GND Input/Output

+5V_OUT GND Output

C<1,2>_Out GND Output

C<1,2>_Gate GND Input

C<1,2>_In

INT_Out

GND -

GND Input

GND Output

-

Digital input/ output port A, channel

0~7 & channel 10~17.

Digital input/ output port B, channel

0~7 & channel 10~17.

Digital input/ output port C, channel

0~7 & channel 10~17.

+5V DC power

Output pins of counter/ timer 1 and 2

Gate control pins of counter/ timer 1 and 2

External clock source of counter/ timer

1 and 2

Interrupt output. This pin changes to logic 1 whenever the

USB-4751 generates an interrupt, and returns to logic 0 when the interrupt is cleared.

Digital ground

3.2.3 LED Indicator Status Description

The USB Module is equipped with a LED indicator to show the current status of the device. When you plug the USB device into the USB port, the LED indicator will blink five times and then stay lit to indicate that it is on. Please refer to the following table for detailed LED indicator status information.

Table 3.2: LED Indicator Status Description

LED Status

On

Off

Slow Blinking (5 times)

Fast Blinking

(Depends on data transfer speed).

Description

Device ready for work

Device not ready to work

Device initialization

Device working

USB-4751/4751L User Manual 14

3.3 Digital I/O Connections

3.3.1 Dry Contact Support for Digital Input

Each digital input channel accepts either dry contact or 0 ~ 5 VDC wet contact inputs. Dry contact capability allows the channel to respond to changes in external circuitry (e.g., the closing of a switch in the external circuitry) when no voltage is present in the external circuit. Figure 3-3 shows external circuitry with both wet and dry contact components, connected as an input source to one of the card's digital input channels.

Figure 3.3: Digital Input Connections

15 Chapter 3

3.4 Field Wiring Considerations

• When you use USB-4751/4751L to acquire data from outside, noises in the environment might significantly affect the accuracy of your measurements if due cautions are not taken. The following measures will be helpful to reduce possible interference running signal wires between signal sources and the USB-4751/4751L.

• The signal cables must be kept away from strong electromagnetic sources such as power lines, large electric motors, circuit breakers or welding machines, since they may cause strong electromagnetic interference. Keep the analog signal cables away from any video monitor, since it can significantly affect a data acquisition system.

• If the cable travels through an area with significant electromagnetic interference, you should adopt individually shielded, twisted-pair wires as the analog input cable. This type of cable has its signal wires twisted together and shielded with a metal mesh. The metal mesh should only be connected to one point at the signal source ground.

• Avoid running the signal cables through any conduit that might have power lines in it.

• If you have to place your signal cable parallel to a power line that has a high voltage or high current running through it, try to keep a safe distance between them. Or place the signal cable in a right angle to the power line to minimize the undesirable effect.

USB-4751/4751L User Manual 16

2

Specifications

A

Appendix A Specifications

A.1 Digital Input/Output

Channels

Programming

Mode

Input Voltage

Output Voltage

+5V Output

Interrupt Mode

A.2 Counter

48 Bi-directional (24 for USB-4751L)

8255 PPI Mode0

Low 0.8 V max

High 2.0 V min

Low 0.5 V max. @ 12mA (sink)

High

3.8 V min. @ -12mA (source)(each line)

3.8 V min.@5mA(source)(high of every line)

100mA max.

PC0 source; PC4 gate/PC0 source

Channels

Resolution

Compatibility

Base Clock

Frequency measurement

PWM Generation

External Input Divide

A.3 General

2 independent

32-bit counters (low 16bit by hardware and high 16bit by ARM)

TTL compatible logical level input

External 8MHz max.

2 independent programmable clock sources

Internal 20MHz max.

Input frequency from 0.1Hz to 10Mhz

2Hz to 10Mhz

2 to 65535

I/O Connector Type

Dimensions

Power

Consumption

Temperature

Relative Humidity

Opto-22 * 2 and 10-pin screw terminal *1

132 X 80 X 32 mm (5.2” X 3.2” X 1.3”)

5 V @ 500 mA max.

Operation 0~60° C (32~140° F) (refer to IEC 68-2-1, 2)

Storage -20~70° C (-4~158° F)

5%~95% RH non-condensing (refer to IEC 68-2-1, 2)

USB-4751/4751L User Manual 18

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals