DEKA 8AGC2

DEKA 8AGC2
8AGC2-DEKA
Valve-Regulated, Absorbed Glass Mat Technology
SPECIFICATIONS
Nominal Voltage (V)
6V
Capacity at C/100
220Ah
Capacity at C/20
190Ah
Weight
70 lbs. (32 kg)
Plate Alloy
Lead Calcium
Posts
Forged Terminals & Bushings
Container/Cover
Polypropylene
Operating Temperature Range
-40°F (-40°C) - 140°F (60°C)
For Charging Parameters please refer to
www.mkbattery.com
Click on Technical Data, then on Photovoltaic Charging
Parameters in the PV/Solar section
Vent
Terminal
DIMENSIONS
Inches (mm)
Length
10.25 (260 mm)
Width
7.09 (180 mm)
Height
10.88 (276 mm)
Self-sealing
U (SAE/STUD)
Rated UN2794 - Wet, Filled with Acid
Made in the U.S.A. by East Penn Manufacturing Co., Inc.
Distributed by:
Cycle Chart applies to all MK AGM batteries (except 8AGC2-DEKA cycle chart x 2)
MK Battery
1631 South Sinclair Street ● Anaheim, California 92806
Toll Free: 800-372-9253 ● Fax: 714-937-0818 ● E-mail: [email protected]
All data subject to change without notice. No part of this document may be copied or reproduced, electronically or mechanically, without written permission from the company. ©2011 MK Battery
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement