Digi-Sense | 60010-85 | Catalog PDF - Blaze Technical Services Inc.

Catalog PDF - Blaze Technical Services Inc.
Blazing Performance
Track-tested temperature measurement instrumentation
Type K Temperature Probes
Exhaust
Temperature
Sensor Harness
¼" diameter with compression fitting cap and sleeve.
Capable of withstanding extreme vibration up to
2200°F. Sold as a set of eight type K thermocouples
with standard cable length to connector box. Set
includes two each of the following lengths: 9", 14",
18", and 23". 062002H-GOLD features Kapton®
wiring for less weight. 062002I features stainless steel
overbraid wiring. Fast response and consistent reading
make these temperature sensors the preferred choice
of serious competitors. Race track tested and approved
by professional race teams, these temperature sensors
will give you the data you need without draining your
race budget.
Catalog number
062002I
(SS Overbraid Wiring)
062002H-GOLD,
(Kapton® Wiring)
Individual Exhaust
Harness Probe
mers,
cher
Dear Custo
on Schuma product
Chief for D
a
w
d
il
re
u
C
b
,
n
rd
a
Lee Be
“If you ca ill hold up
e
m
ld
to
ce
Racing, on up to these cars, it w Today,
ld
o.
that can ho at was five years ag se Blaze
u
Th
s
.”
m
re
a
e
h
te
yw
ce
an
NHRA ra
p
to
e
th
f
many o
probes.
ilt our
temperature
Inc., we bu ugh
l Services,
a
no
ic
e
n
d
e
ch
g
Te
g
sors ru
At Blaze
ducing sen and punishment, yet ns
ro
p
n
o
ti
ta
repu
uatio
heat
d extreme
ightest fluct
to withstan ugh to capture the sl ufacturing
an
no
sensitive e re. Blaze has been m can custom
e
tu
in tempera sensors since 1996. W ur customers’
o
t
re
e
tu
e
m
ra
e
p
to
m.
cts
tem
build produ rders are not a proble a
o
design and
ers
l
a
ff
o
ci
e
ze
sp
la
B
s—
,
d
in
unique nee at industry you are g application.
in
wh
No matter it your most demand
e
su
to
n
uce only th
o
ti
solu
ent to prod ined ISO
m
it
m
m
co
r
with ou
s mainta
In keeping ty products, Blaze ha Look to Blaze to
li
a
3.
u
0
q
0
2
st
highe
n since
certificatio
9001-2000 ur future.
yo
be part of
an
Ralph Hicankm
Purchased as an individual temperature sensor. Same
specifications as the Exhaust Temperature Sensor
Harness above, but with customer-specified cable
length.
Inc.
m
Ralph Hick ze Technical Services,
la
B
t,
n
e
d
si
Pre
Catalog number
0620021-”L”, 062002H-”L”
(“L” is customer specified length)
Muffler Clamp Probe
Drill hole in headers. Place the probe through the drilled
hole and secure with muffler clamp. Good for headers
without a compression fitting welded on. 3⁄16" diameter,
6 foot cable length, and 90 degree bend.
Catalog number
Clutch Probe
This probe is used in the exhaust port of the clutch
bell housing. Gives quick, accurate data of the clutch
temperature during the run. 3⁄16" diameter with 1⁄8"
compression sleeve and nut with mini plug. Plugs into
standard data acquisition units.
Catalog number
090303C
050604C
Exhaust Probe with
Compression Fitting
1⁄8"
NPT compression fitting. Adjustable-depth type
compression fitting. 3⁄16" diameter, 4 foot cable length,
and 90 degree bend.
Clutch Plate
Blade Probe
Test Cable
with Alligator Clips
After warm-up, take clutch plate temperatures quickly
and accurately using this blade probe designed to slide
down in between clutch plates to check uniformity
of temperature. Plugs into any thermocouple meter
available in this catalog.
Test your individual thermocouples in the connecting
block using this clip-on test cable. A “must-have” for
troubleshooting electrical problems. Plugs into any
thermocouple meter available in this catalog.
Catalog number
Catalog number
120203A
031504A
040805N
Blazing Performance
1.800.791.9874
Catalog number
•
www.blazeprobes.com
1
Standard Type K
Thermocouple Thermometer
Easy-to-use, four-button design
■ Heavy-duty housing with bright, easy-to-read display
■ IP54-rated case provides splash and dust resistance
■ UL-listed intrinsically safe for hazardous locations
This thermometer features a rugged ABS/polycarbonate plastic case with a sealed silicone
rubber keypad for an IP54 rating. Tapered casing design allows for easy one-handed
gripping, while maintaining a large, easy-to-read display. Seven-segment character LCD for
easy readability and viewing. Large, positive-action buttons are easy to press. Calibration
function ensures accuracy and correct temperature measurement at every use. To calibrate
meter, simply place probe in a container packed with ice, fill with water, and press the CAL
button; meter automatically recognizes the freezing point.
Use the Hold function to freeze readings for later viewing. The built-in tilt stand enables handsfree operation. Select between °F/°C scales. Auto-shutoff helps to save on battery life. Low-battery
indication provides power-failure warning. Large, 1⁄2" high screen is easy to read, even from a distance.
Rear foam padding helps to hold the meter in place on flat and angled surfaces and prevents slipping.
UL-listed intrinsically safe for Class I, Groups A, B, C, and D, Division 1 hazardous locations. Meter operates on
two AA batteries (included) and accepts one type K thermocouple probe with mini-connector.
Probe sold separately.
What’s included: two AA batteries.
Catalog number
Description
Temperature range
WD-60010-10
Type K thermometer
–418 to 2501°F (–250 to 1372°C)
Specifications
Accuracy: ±0.2% of reading ±0.9°F
(0.5°C); above –99.9°F/°C ±0.25% of
reading ±2°F (1°C); below –99.9°F/°C
Resolution: 0.1°F/C from –99.9 to
299.9°F/C, 1°F/C outside this range
Accessories
WD-08520-05 Carrying case for storage, canvas cloth,
holds one meter and probe, with belt-loop clip
WD-91100-90 Carrying case for in-field use, splash-proof vinyl,
holds one meter and probe, with belt-loop clip
Economical Thermometer
Digital Pocket
Thermometer
Simple to operate, three-button design
■ Accepts type K thermocouple probe
■ Hold function freezes display’s value
■ °F/°C selectable
Quickly verify
temperatures
This type K thermocouple meter is perfect for any basic temperature
measurement application. The seven-segment, 7⁄8" high display is easy to read,
even at a distance. Splash-resistant membrane keypad is easy to clean and wipe
down. Auto power-off feature turns meter off after 17 minutes after the last key
press to save on battery life. Meter can be calibrated in the field. Low-battery
indicator. Accepts any type K thermocouple with miniconnector.
Probes sold separately.
■ Includes a plastic protective sleeve
with pocket clip and a battery
This thermometer has a water-resistant sealed
case—ideal for use with liquids. Features °F/°C
selection, Min/Max button, and a 4"L stainless
steel tapered probe for penetration into most
semi-solid and liquid substances.
What’s included: four AAA batteries.
Catalog number
Description
Temperature range
WD-93000-00
Economical type K thermometer
–418 to 2501°F (–250 to 1372°C)
Accessories
WD-35627-80 Protective
rubber boot with stand
WD-08520-05 Carrying
case for storage, canvas
cloth, holds one meter and
probe, with belt-loop clip
Specifications
Accuracy: ±0.25% of reading plus
0.9°F (0.5°C) above –99.9°F/C,
±0.25% of reading plus 2°F (1°C)
below –99.9°F/°C
Resolution: 0.1°F/°C from –99.9 to
299.9°F/°C; 1°F/°C outside this range
Display: 4-digit LCD with 3⁄8" high
numerals
Display update rate: every 0.5 second
Power: two AA batteries (included)
Dimensions: 31⁄4"W x 61⁄4"H x 11⁄4"D
Display: 4-digit LCD with 5⁄8" high
numerals
Display update rate: every 0.5 second
Power: four AAA batteries (included)
Dimensions: 23⁄4"W x 53⁄4"H x 11⁄4"D
Catalog number
Description
WD-90003-00
Digital pocket thermometer
Specifications
Range:
14 to 392°F (–10 to 200°C)
Power: one 1.5 V button cell
Dimensions
Probe: 43⁄8"L x 9⁄64" dia
Head: 17⁄8" dia
Blazing Performance
Track-tested temperature measurement instrumentation
2
Advanced Thermocouple
Thermometers
Dual inputs for temperature differential
measurements
■ Multi-data display shows both temperatures
and temperature differential simultaneously
■ Memory stores readings with real time
and date stamps
Dual J-T-E-K®
thermometer
These heavy-duty thermometers feature a rugged ABS/polycarbonate,
splash- and dust-resistant plastic case with a sealed silicone rubber
keypad for an IP54 rating. Large, positive-action buttons are easy to
press. Tapered casing design allows easy one-handed gripping, while
maintaining a large, easy-to-read display. Take single, dual, or
differential temperature measurements. Record those readings for
later documenting or analysis. The multi-data seven-segment character
LCD simultaneously indicates the reading of each probe, as well as the
differential reading.
DuaLogR®
thermometer
Calibration function ensures accuracy and correct temperature
measurement at every use. To calibrate the meter, simply place the probe
in a container packed with ice, fill with water, and press the CAL button;
meter automatically recognizes the freezing point.
Use the Hold function to freeze readings for later viewing. Min/Max
button displays the lowest/highest measurement since the meter was
powered on. The built-in tilt stand enables hands-free operation. Select
between °F/°C scales. Auto-shutoff helps to save on battery life. Lowbattery indication provides power-failure warning. Back foam padding
helps to hold the meter in place on flat and inclined surfaces and
prevents slippage. Uses two AA batteries (included).
Description
WD-60010-40
Dual J-T-E-K thermocouple thermometer
WD-60010-50
DuaLogR thermocouple thermometer
Specifications
Dual J-T-E-K® model takes single, dual, or differential temperature
measurements. Nonvolatile memory stores up to 25 sets of readings.
0.1°/1° scalable resolution. Accepts one or two thermocouple
type J, T, E or K probes with miniconnectors. Probes sold separately.
Input type and range
J: –328 to 1832°F (–200 to 1000°C)
K: –418 to 2501°F (–250 to 1372°C)
T: –418 to 752°F (–250 to 400°C)
E: –328 to 1832°F (–250 to 1000°C)
Accuracy: ±0.1% of reading ±0.7°F
(0.4°C) above –238°F (–150°C);
±0.25% of reading ±2°F (1°C) below
–238°F (–150°C)
DuaLogR® model has all the same features listed above, but also
includes datalogging capability to log and document up to 1000
measurements on-site at any location. The data can be downloaded to
your computer using the optional RS-232 interface (sold separately at
right) and saved in a spreadsheet program. The data is time-and-date
stamped to help with data-trending and analysis. Logging interval can
be stored by manually pressing the LOG button, or can be set to log
automatically every one second to 60 minutes. The 1" tall LCD with
triple, four-digit display shows the current, minimum, and maximum
measurements. Continuous operation possible with optional AC adapters
(order separately). Accepts one or two thermocouple type J, T, E or K
probes with miniconnectors. Probes sold separately.
Dimensions: 31⁄4"W x 61⁄4"H x 11⁄4"D
Resolution: 0.1/1°C below 1000°F/°C,
1° outside this range
Display: three 4-digit LCD with 3⁄8"
and 1⁄4" high numerals
Display update rate: every 0.5 second
Power: two AA batteries (included)
WD-08520-05
Accessories
WD-08520-05
Carrying case for storage,
canvas cloth, holds one meter
and probe, with belt-loop clip
WD-91100-90 Carrying case
for in-field use, splash-proof vinyl,
holds one meter and probe, with
WD-91100-90
belt-loop clip
WD-91100-52 Adapter, 115 VAC,
compatible with DuaLogR model only
WD-91100-85 RS-232 Interface connects to your computer’s 9-pin
serial port for easy uploading of data. Use with most popular RS-232
programs including Windows®. Compatible with DuaLogR model only
WD-10374-50 Infrared printer is ideal for on-site documentation.
Transfer data using infrared light without the use of cables—just
position printer within 12" of the top of the thermometer. Set print
interval rate from once every three seconds to once every 60 minutes.
Includes one roll of paper and four AA batteries. Compatible with
DuaLogR model only
WD-10374-52 Replacement printer paper, pack of 6 rolls
What’s included: two AA batteries.
Blazing Performance
1.800.791.9874
Catalog number
•
www.blazeprobes.com
3
RTD Thermometers
High-accuracy temperature
measurement up to ±0.06°F (±0.03°C)
■ IP54-rated case provides splash
and dust resistance
■ Heavy-duty housing with bright,
easy-to-read display
These thermometers feature a rugged ABS/polycarbonate plastic
case with a sealed silicone rubber keypad for an IP54 rating.
Casing design is tapered towards the bottom of the meter for
comfortable one-handed gripping, while maintaining a large display
at the top. Seven-segment character LCD allows easy readability and
viewing. Large, positive-action buttons are easy to press. Calibration
function ensures accuracy and correct temperature measurement at
every use. To calibrate the meter, simply place the probe in a container
packed with ice, fill with water, and press the CAL button; meter
automatically recognizes the freezing point.
Standard
Use the hold function to freeze readings for later viewing. The built-in tilt stand enables hands-free
operation. Select between °F/°C scales. Auto-shutoff helps to save on battery life. Low-battery indication
provides power-failure warning. Foam padding on back helps to hold the meter in place on flat surfaces and
prevents slipping. Meters operate on two AA batteries (included) and accept one 100Ω RTD probe with three-pin
connector. Probe sold separately.
Advanced
Standard model is perfect for any basic temperature measurement application. It features an easyto-use, four-button design. The large 1⁄2" high screen is easy to read, even from a distance. Reliability, quality,
and pricing make this the best value.
Advanced model has all the same features listed above, plus datalogging capability to
log and document up to 1000 measurements on-site at any location. Download the data
to your computer using the optional RS-232 interface (sold separately below) and save in
a spreadsheet program. The data is time-and-date stamped to help with data-trending and
analysis. Logging interval can be stored by manually pressing the LOG button, or can be set
to log automatically every one second to 60 minutes. The 1" high LCD with triple, four-digit
display shows the current, minimum, and maximum measurements. Continuous operation is
possible with an optional AC adapter (order separately below).
What’s included: two AA batteries.
Accessories
WD-08520-05 Carrying case for storage, canvas cloth, holds one meter and probe,
with belt-loop clip
WD-91100-90 Carrying case for in-field use, splash-proof vinyl, holds one meter and probe,
with belt-loop clip
WD-91100-52 Adapter, 115 VAC, compatible with Advanced model only
WD-91100-85 RS-232 interface connects to your computer’s 9-pin serial port for easy
uploading of data. Use with most popular RS-232 programs including Windows®.
Compatible with Advanced model only
Catalog number
WD-60010-80
Standard Digi-Sense RTD thermometer
WD-60010-85
Advanced Digi-Sense RTD thermometer
Specifications
STANDARD MODEL
Range: –328 to 1562°F (–200 to 850°C)
Resolution: 0.1°F/°C from –148 to 392°F
(–100 to 200°C), 1°F/°C outside this range
Accuracy: ±0.4°F (±0.2°C) from –148 to
392°F (–100 to 200°C), ±4°F (±2°C) outside
this range
Display: 4-digit LCD with 3⁄8" high numerals
Display update rate: every 0.5 second
Power: two AA batteries (included)
Dimensions: 31⁄4"W x 61⁄4"H x 11⁄4"D
Thermohygrometer
ADVANCED MODEL
Range: –328 to 2210°F (–200 to 1210°C)
Resolution: 0.01°F/°C from –99.99 to
99.99°F/°C, 1°F/°C above 1000°F/°C, 0.1°F/°C
outside this range
Accuracy: ±0.06°F (±0.03°C) for 0.01°
resolution, ±0.1°F/°C for 0.1° resolution,
±1°F/°C for 1° resolution
Display: triple 4-digit LCD, 3⁄8" high for top,
1⁄4" high for bottom
Display update rate: every 0.6 second
Power: two AA batteries (included) or
optional AC adapter
Dimensions: 31⁄4"W x 61⁄4"H x 11⁄4"D
Specifications
Range
RH: 0 to 100%
Temp: –40 to 140°F (–40 to 60°C)
Dew point: –130 to 140°F (–90 to 60°C)
Resolution
RH: 0.1%
Temp: 0.1°F/°C
Dew point: 0.1°F/°C
Dimensions
Meter: 3"W x 6"H x 1"D,
Probe: 10"L x 0.5" dia
Simultaneously display temperature,
humidity, and dew point
■ IP54 rating protects against dust and splashes
■ Single- or dual-point calibration provides ultimate accuracy
This industrial-grade thermohygrometer offers the unique feature of displaying
temperature, humidity, and dew point simultaneously—eliminating the need to
switch screen displays. The impact-resistant, IP54-rated design protects the meter
from dust, particles, and water. The ergonomic design provides comfort during
measurement, and features a sealed silicone rubber keypad.
Features selectable °F/°C readings, hold function, single- or dual-point temperature
and humidity calibration, low-battery indication, and a built-in tilt stand.
What’s included: probe and two AA batteries.
Optional AC adapter sold separately at right.
Description
OINT
DEW P
Accuracy
RH: ±2%
Temp: ±1°F (±0.5°C)
Dew point: —
Response time: 4 seconds
Sensor
RH: capacitance film
Temperature: thermistor
Power: two AA batteries (included)
Catalog number
Description
WD-60020-40
Thermohygrometer with dew point
Accessories
WD-60020-62 Replacement RH/temperature probe, 3-ft cable
WD-91100-52 AC adapter, 115 VAC
Blazing Performance
Track-tested temperature measurement instrumentation
4
12-Channel
Scanning Thermometer
Stores and recalls up to 4680 sets
of readings with time and date
■ Automatically or manually display,
record, and output temperature readings
■ Field calibrate each probe separately—
achieve accuracies of ±0.1% of reading!
■ Bidirectional RS-232 for setup
or PC datalogging
Benchtop 12-channel
scanning thermometer
The 12-channel scanning thermometer is your best choice when simultaneous
monitoring of temperatures during different processes or phases is critical.
Portable unit accepts most any power source giving you great flexibility as
to where and when it may be used. Functions as a datalogger—store data
in nonvolatile memory and later download to your printer or PC. Link up to
eight of either model in series to expand the number of channels you can
scan for a maximum of 96 channels. Each of the 12 thermocouple inputs
are programmable to scan from every four seconds to every hour. Graph in
real time—use CD-ROM software (included). Includes a real-time clock and
nonvolatile memory. RF immunity—maintains accuracy in RF fields.
Back view; accepts any type J or K
thermocouple probe with ANSI miniconnectors
Parallel printer connection allows you to connect the thermometer to a
printer—make a hard copy of your data as a permanent record. Power unit
with included 115 VAC adapter or use with any 10 to 28 VDC or 7 to 20 VAC
500 mA power supply.
Instrument Features—Scan and log up to 12 thermocouple inputs from
any combination of type J and K thermocouple probes. All thermocouple types
are individually selectable per channel. Accepts thermocouple probes with
miniconnectors for quick and easy probe changes. Records temperature data
sequentially so that process variations and thermal profiling can be monitored.
Datalogging feature automatically stores up to 4680 sets of readings and then
allows the data to be downloaded to a computer. Up to eight units can be
linked together for a maximum channel capacity of 96.
FREE Real-Time Logging Software
The easy-to-use front panel menu keys allow the user to program datalogging
and print intervals, scan rates, date and time, temperature scales (°F, C, K, or R),
resolution (0.1° or 1°), channels displayed, thermocouple type, and data output
parameters. Each channel features HOLD, STORE, MIN and MAX, RECALL, and
AVERAGE buttons. All channels can be calibrated in the field at one or two points
to ensure accuracy.
Unit includes FREE Windows® 95/98NT/2000/XP-compatible software on
CD-ROM that controls and displays up to 12 scanners simultaneously.
Logged data may be saved to a file and imported into spreadsheet or
word processor. Live updating graph shows time and temperature!
Multiple Safety Features—Thermocouple probes are electrically isolated
from each other and data outputs to provide safe and accurate measurements
even when probes are exposed to harsh electrical conditions. Each channel
offers high and low audible alarm selectable set points.
Physical Features—Easy-to-read, 3⁄4" high, 14-segment, 12-character
alphanumeric LCD indicates channel number or name, temperature reading,
temperature scale, open probe conditions, and out-of-range readings.
View channel temperature—
push the “virtual buttons” to
change thermometer functions
Live, real-time graphs
auto-adjust the time on the Y-axis
Catalog number
Description
WD-69200-00
12-channel scanning thermometer
Accessories
WD-22050-04 Parallel printer cable, 36M/DB25M
Computer/Printer Capabilities—RS-232 serial communication compatible.
Software allows data to be downloaded to a computer and then displayed in
real-time tabular or graphical format (software and cable included). Optional
parallel printer cable enables scanner to be connected directly to a printer,
without using a computer. Datalogging and printing intervals can be set from
four seconds to 99 minutes, 59 seconds.
Specifications
Input type and range
J: –392 to 1832°F (–200 to 1000°C)
K: –418 to 2501°F (–250 to 1372°C)
Accuracy: ±0.8°F (±0.5°C), and ±0.1% of reading
above –238˚F (–150˚C), ±2°F (±1°C), and ±0.25% of
reading below –238˚F (–150˚C)
Resolution: 0.1°/1° selectable up to 999.9°;
1° above 1000°; autorange to 1° below –150°C
Display: 12-character alphanumeric LCD
What’s included: software and cable.
Blazing Performance
1.800.791.9874
•
www.blazeprobes.com
Display update rate: 3 seconds/channel
Scan rate: from 4 seconds to 99 minutes, 59 seconds
Digital output: RS-232, ASCII format, baud rate 19.2
K, RJ11 connector; Centronics parallel printer output;
DB25F connector
Power: 115 or 230 VAC adapter (included);
10 to 28 VDC or 7 to 20 VAC 500 mA power supply
Dimensions: 101⁄2"W x 31⁄2"H x 71⁄2"D
5
InfraPro® Infrared Thermometers
Quick temperature measurement of difficult
to reach or moving objects
■ Single, extra-bright laser targets your measurement area
■ InfraPro 3 and 4 log readings and feature an RTD input
to take contact temperatures
Rugged enough for industrial use, yet compact
and lightweight enough to be carried around
with you, these infrared thermometers are
extremely easy to use: just aim, pull the trigger,
and read the display. The 41⁄2-digit backlit display
shows temperature readings in °F or °C; low-battery
indication; and hold, scan, and max. Display holds for
7 seconds. Underrange and overrange conditions are
also indicated on the display.
Advanced models 35639-20 and -30 indicate max, min, dif,
avg, emissivity, high alarm, low alarm, probe, log, and recall.
Other features include an RTD input, 12 datalogging points,
adjustable emissivity, and a rubber grip and nose that improve
resistance to shock, damage, water, and dust. Extra-bright
laser is visible in indoor and outdoor applications.
What’s included: one 9 V battery and a hard carrying case.
35639-20
Specifications
Catalog number
WD-35639-00
WD-35639-20
WD-35639-30
InfraPro 1
InfraPro 3 advanced
InfraPro 4 advanced
–25 to 999°F
(–32 to 535°C)
–25 to 1100°F
(–32 to 600°C)
–25 to 1400°F
(–32 to 760°C)
Description
Range
Resolution
Accuracy
Response time
Emissivity
Laser sighting
Distance-to-target
Contact probe
Power
Dimensions
0.5°F (0.2°C)
0.1°F (0.1°C)
0.1°F (0.1°C)
±1% of the reading or ±2°F (±1°C) whichever is greater
500 msec
Fixed at 0.95
0.10 to 1.00
0.10 to 1.00
Class II laser
Class II laser
Class II laser
12:1
30:1
50:1
—
Optional
Optional
One 9 V battery (included)
8"L x 6"W x 2"H
Accessories
WD-35629-90 Soft carrying case with integral belt loop and Velcro® closure
Laser targets your
measuring area.
TempTestr®
IR Thermometer
Mini
TempTestr®
IR Thermometer
Ergonomic design allows for easy
gripping and one-handed operation
■ Laser sighting pinpoints your exact target area
Economical, and fits right
in your pocket!
This pocket-sized infrared thermometer takes surface temperature
readings of any liquid, solid, or semisolid in less than one second.
Operation is simple—turn it on, point at sample, and take reading.
Features include switchable °F/°C display, Hold function, Min/Max
memory readings, adjustable emissivity, low-battery indication,
flip-open stand, and soft touch keypad.
What’s included: metal storage case, wrist strap,
and one 3 V battery.
Catalog number
Description
WD-39642-00
Mini TempTestr® IR thermometer
Specifications
Range: –27 to 428°F (–33 to 220°C)
Accuracy: ±2% of reading or ±4°F
(±2°C), whichever is greater
Response time: 1 sec
Emissivity: adjustable from 0.01
to 1.00
Laser sighting: none
Distance-to-target size ratio: 1:1
Power: one 3 V battery (included)
Dimensions: 21⁄2"L x 11⁄2"W x 1⁄2"H
Taking temperature measurements has never been easier—just point
the thermometer at your target and push one button! The TempTestr IR
thermometer is ideal for anywhere you need to quickly and accurately
measure surface temperatures. Results in under 1⁄2 second. Hold function
freezes reading for seven seconds.
What’s included: one 9 V battery.
Catalog number
Description
WD-35626-10
TempTestr® IR thermometer
Accessories
WD-35625-80 Carrying case for TempTestr IR thermometer
Specifications
Range: 0 to 500°F (–18 to 260°C)
Accuracy: ±2% or ±3°F (2°C) from
77 to 500°F (25 to 260°C); ±5°F (3°C)
from 30 to 77°F (–1 to 25°C);±7°F
(4°C) from 0 to 30°F (–18 to –1°C)
Response time: 500 msec, 95%
response
Emissivity: preset at 0.95
Laser sighting: Class II
Distance-to-spot-size ratio: 6:1
Power: one 9 V battery (included)
Dimensions: 71⁄4"L x 13⁄4"W x 11⁄2"H
Blazing Performance
Track-tested temperature measurement instrumentation
ns
Ap
pl
ing
Typ
lR
ica ac
icatio
■ Measure tire and
rack temperatures
■ Monitor brake
temperatures
■ Measure cylinder
performance via
exhaust port
■ Assess universal or
constant velocity
joint performance
■ Diagnose cooling
system performance
Palm-Sized
Infrared
Thermometer
IR Thermometer
with Type K Input
Displays infrared and contact
temperatures simultaneously
Compact design fits perfectly
in your hand and pocket
■ Laser sighting and adjustable
emissivity at an economical price
This infrared thermometer provides quick and accurate temperature
measurements. View the current temperature, temperature scale (°F or °C), and
battery life icon on the large LCD. Two battery compartments provide power to
the thermometer and laser separately. This gives you the flexibility to measure
temperature without the laser sighting if the laser battery is weak. Other features
include selectable °F/°C, min/max measurements, lock function for continuous
monitoring, automatic data hold, auto off, and battery-life icon.
What’s included: two CR2032 batteries.
■ Bright, amber backlight is ideal when
measuring in low-lit areas
Measure infrared and contact temperature with this thermometer. Meter has a thermocouple port
to accommodate a type K thermocouple when contact temperature is a must (thermocouple sold
separately). The adjustable emissivity provides greater measurement capabilities for a wider
selection of surface measurements. The Class II laser sighting has the capability of being turned
off in applications where the laser is unnecessary.
The LCD simultaneously displays the current temperature in °F or °C, the pre-selected emissivity,
the laser scan, and battery life icons. Other features include min/max and average, min/max
differential, lock function for continuous measurement, high and low audible and visual alarm
limits, automatic data hold, and auto off.
What’s included: two AAA batteries.
Catalog number
Description
WD-39643-00
Palm-sized infrared thermometer
Specifications
Range: –27 to 482°F (–33 to 250°C)
Accuracy: ±2% or ±3.6°F (±2°C)
Response time: 1 sec, 90% response
Emissivity: adjustable from 0.5 to 1
Laser sighting: Class II
Distance-to-target size ratio: 8:1
Power: two CR2032 batteries
(included)
Dimensions: 41⁄2"L x 2"W x 3⁄4"H
Catalog number
Description
WD-39644-00
IR thermometer with type K input
Specifications
Range
Infrared: –76 to 932°F (–60 to 500°C)
Contact (with optional thermocouple):
–83.2 to 1999°F (–64 to 1400°C)
Accuracy
Infrared: ±2% or ±3.6°F (±2°C)
Contact (with optional thermocouple):
±1% or ±1.8°F (±1°C)
Response time: 1 sec, 90% response
Emissivity: adjustable from 0.1 to 1
Laser sighting: Class II
Distance-to-target size ratio: 11:1
Power: two AAA batteries (included)
Dimensions: 3"L x 11⁄2"W x 6"H
Noncontact infrared (IR) thermometers use infrared technology to quickly and conveniently
measure the surface temperatures of objects. They provide fast temperature readings without
physically touching the object. You simply aim, pull the trigger, and read the temperature on the LCD!
2013
Use as either
an IR or contact
thermometer
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising