Cross Technologies 1586-06 Programmable RF Attenuators, 6-12 GHz Data Sheet

Below you will find brief information for Programmable Attenuator 1586-06. The 1586-06 Programmable Attenuator contains six General Microwave Model 3496H-64-4 11 Bit Digital PIN Attenuators and Local/Remote control circuitry to independently adjust each attenuator. Multi-function push button switches select the attenuation locally. Remote operation also controls each attenuator and allows status monitoring of attenuator settings and power supply and summary alarms. Attenuator settings appear on the LCD display. Connectors are SMA, female for inputs and outputs and DB9 female for the RS422 remote control.

PDF Download
Document
Programmable Attenuator 1586-06 Datasheet | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 6 to 12 GHz frequency range
  • 64 dB attenuation range per channel
  • Local and Remote control opertation
  • Independent channel attenuation adjustment
  • Nonvolatile memory for attenuation value storage
  • Redundant power supplies
  • SMA and DB9 connectors
  • LCD display for attenuation values
  • Alarm/Normal status indication
  • RS422 remote control

Frequently asked questions

The 1586-06 Programmable Attenuator operates in the 6 to 12 GHz frequency range.

Each channel of the 1586-06 Programmable Attenuator can provide up to 64 dB of attenuation.

Yes, the 1586-06 Programmable Attenuator can be controlled remotely via RS422 interface. The remote control allows status monitoring of attenuator settings and power supply and summary alarms.

The 1586-06 Programmable Attenuator stores the attenuation values in nonvolatile memory. This means that the values are retained even when the unit is powered off and on.

The 1586-06 Programmable Attenuator uses SMA female connectors for RF inputs and outputs, and a DB9 female connector for the RS422 remote control.
ALP:
Preparing document for printing…
0%