Wayne Dalton 7100 garage door Quick Start Guide

Below you will find brief information for garage door 7100. The manual guides you through the installation of your new garage door. The content includes detailed steps and illustrations for each stage of the process. The manual is intended to be used as a supplement to the complete Installation Instructions and Owner's Manual available on the Wayne-Dalton website.

PDF Download
Document
Wayne Dalton Garage Door 7100 Quick Start Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Front Mount Low Headroom
  • Torsion
  • Outside Hook-Up
  • Easy to install
  • Step-by-step instructions
  • Detailed illustrations

Frequently asked questions

No, it's designed to be used as a supplement. You should refer to the full installation instructions and owner's manual for complete details on installation and operation.

It's always determined from inside the building looking out. So, the right hand side of the door is the side that is on your right when you are standing inside the garage looking at the door.

You can identify the track application based on the length of the struts. Short struts are typically installed along the top rail of the top section and or along the bottom rail of the bottom section. Long struts are typically installed along the top and or bottom rails of sections. The height of the long struts will indicate whether you have a 2” or 3” track application.

Immediately have necessary adjustments and/or repairs made by a trained door systems technician using proper tools and instructions.

Keep the bottom section face down on a couple of sawhorses or a flat, clean/smooth surface.
Preparing document for printing…
0%