EREL Certificate of Conformance: ICAO

EREL Certificate of Conformance: ICAO
BV. AVS.4.15.14007CC -12
Issuing Center : ANTW ERP
Page 1/ 2
VERITAS
CERTIFICATE OF CONFORMITY
To ICAO A nnex 14 - Sixth Edition - July 201 3
(Standard s and recommended practices)
To ICAO Aerodrome Design Manual - Part 4 & 6
To Technical Specificati o n IEC 61827
To Trans port Canada TP312 Aerodrome Standards and Recommended Practices
Manual of Standards Part 139 - Aerodromes - Aus tralia
Product :
EREL-x -xxx (V1 ,5) Clear, Yellow, Red and Green
Manufactured by A DB Zaventem
A pplication: Runway Edge Hig h Intens ity Bidirectiona l Elevated
lig ht, Stopway & End Lig hts, Threshold
- was found in conformity with :
• the catalogue sheet DOCA03120EV4
• the ICAO Annex 14 - Vo lume I - §5.3. 8; 5.3.9 ; 5.3 .11 & 5.3 .16 for light output
for runways 45m & 60m wide
• the ICAO Aerodrome Design Manual - Part 6 : Frangibility - §4 .9
• the TP 312 Aerodrome Standard s and Recommended Practices
• . the FAA AC150/5345-46 - §3.4.2; 3.6. 1; 3.7.2 & 3.10
• the IEC TS 61827
• the Manual of Standard s Part 139 - Aerodromes - Australia
- Date of inspection: A pri l 17 h , 201 5.
- and has been, upon request of:
Leuvensesteenweg, 585
B - 1930 ZAVENTEM - BELGIUM
- inspected in conformity with the applicable requ irements of
• the catalogue sheets A. 03.1 20
• the ICAO Annex 14 - Volume I - §5.3.8; 5.3.9 ; 5.3.11 & 5.3.16 for light output
for runways 45m & 60m wide
• the ICAO Aerodrome Design Manual - Part 6 : Frangibility - §5 .2
• the TP 312 Aerodrome Stand ard s and Recom mended Practices - Section
5.3. 10
• the FAA A C 150/5245-46 - §4. 6. 5; 4 .6.7; 4 .6.10
• the Manual of Standard s Part 139 - Aerodromes - Australia
Issued at Antwerp on April 17th , 201 5
T
Particulars of inspection: detailed hereafter
changes of
This certifi cate is only valid for a peri od of 5 years from the issuance date, as far as
production process, equipment characteristics nor of applicable requirements occurs during thi s
peri od of validity
BV. AVS.4.15.14007CC-12
Issuing Center: ANTWERP
Page 2/2
f B U 'R E 'A:.U]
cVERITAS
The following survey operations have been carried out without noti ceable
remarks:
•
Attendance,to tests at the Laboratory premises of the manufacturer:
o Examination of test equipment
o Checking of installation of units before testing
o Attendance to photometric tests per applicable proced ures and method
o Attendance to the Colorimetric tests per applicable procedure & method
o Review of the mechanical tests per applicable procedure & method
•
•
Statistical test results per IEC 61827
Test results are detailed in the attached test records.
CONCLUSION
Taking into account the satisfactory results of actual tests and exam inations we confirm
that the manufacturing and the test results for the above specified units are in
conformity with applicable standards, specifications and data sheets, '
(Details of standards and specifications are ind icated on page 1 of this certificate and
data sheet as per catalogue),
ENCLOSURE
Test records of testing which have been attended, du ly stamped for identification by
BUREAU VERITAS:
Photometric test reports:
• Results of intensity values inside the beam
• Results of omnidirectional components for runway edge lights
• Isocandela curves
• Colorimetry
Mechanical test reports:
• Resu lt of FAA & ICAO Aerodrome Design Manual Part 6 tests on wind resistance
and frang ibility, Refer CoC: AVSA.14. 14007/CC-06
Issued at Antwerp on Apri l 17th , 2015
Mr Rud i VANDENBEMP
Inspector Indus
BUREAU VERITAS KHr.J~~
This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of
production process, equipment characteristics nor of applicable requi rements occurs during this
period of validity
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement