null  null
FALCOM
FALCOM, a storied M2M and IoT specialist from Germany, designs, manufactures and
sells world-wide state-of-the-art devices, services and solutions ideally suited to numerous applications:
fleet management, car sharing, usage-based insurance pricing, asset and workforce tracking and security, precision farming.
FOX3-3G
most developed and advanced tracking and data logging system with all options in one product
PRODUCT OVERVIEW
FOX3-3G is a compact, all-in-one device combining
2G/UMTS/HSPA high-speed data communication with the latest
GNSS technology to completely statisfy customer‘s need.
Depending on the requirements of the respective customer, the
nedded hardware options can be decided shortly before
installation. FOX3-3G is designed to operate with internal or
external antennas. The built-in internal antennas can be turned
off while external antennas are in use. Based on its features, this
device will dramatically simplify your logistics as well as the
installation process and the post-installation support. Newly
developed FALCOM „PREMIUM-Features“ show the way to the
future of mobile data logging, storing, processing and sending.
IOBOX-MINI4)
(13 IO ports)
IOBOX-CAN4)
(CAN-Bus interface,
8 IO ports)
FOX3-3G
FOX3-3G is a configurable smart tracking / data logging device
which can be fully adapted to user requirements.
There are two models of FOX3-3G available: FOX3-3G without
audo interface and FOX3-3G-AUDIO with audio interface.
FOX3-3G offers new features like: DATA ENCRYPTION, several
HISTORY MODES or ECO-DRIVE/BEHAVIOUR LOGGING
beside standard items like status reports, alerts messaging,
audio call, spy calls or geofencing.
FOX3-3G BLOCK DIAGRAM
PRODUCT HIGHLIGHTS
State-of-the-art 3G/2G and GNSS technology
3-axis acceleration, internal temperature sensors
Gyro / Magnetic sensors (external only)
Sensor interface via RS-232 / RS-485 / 1-Wire / I²C / CAN
2
6pin connector
CAN-H
CAN-L
CAN
Transceiver3)
Power
Management
Customizable firmware configuration
Multi-function I/Os
2
8
IGN
I/O2
RXA_0
Optional
Internal/External 2G+3G/GNSS antennas
Activation with PFAL-Command
4)
Accessory
5)
FOX3-3G-AUDIO only.
+IN
1
7
Display connectivity (JAZZ2)
Audio interface (SPK+MIC)
2,3)
GND
I/O1
I/O3
GNSS antenna
8pin connector
2)
Sensors
Passive / active RFID connectivity via RS-232
multi-GNSS
receiver
BIOS
Backup battery 4)
1)
Processor
(CPU)
FALCOM PFAL programming language
Optional battery back-up4)
TxA_0
SCL
RxA_1
Power
supply
GSM
GNSS
CPU
BIOS
CAN
Internal
SIM Card
1-Wire
1
5
UMTS/HSPA
GPRS/EDGE
engine
10pin USB
6
Drop-in replacement of previous FOX-generation
2,3)
GND
TxA_1
SDA
2G+3G antenna
1
2
3
4
5
6
7
8
9
10
MOSI
USB_V+
MISO
DM
CLK
DP
Detect USB
+IN
CS
GND
5)
Data-Logger functionality
CAN/FMS interface3), CAN-OBDII (On-Board Diagnostics)3)
Hardware expandable via IOBOX-MINI4) and IOBOX-CAN4)
Internal 2G+3G/GNSS antennas and external antenna ports3)
Communication via USB 2.0 interface
3)
1
Support connection with Garmin devices
CE pending
http://www.falcom.de
FALCOM
FIRMWARE FEATURES
TECHNICAL SPECIFICATION
Embedded TCP/IP stack for client-server application
General
FALCOM protocols: IOP, GSM, AREA, 3DP, BIN
3G (UMTS/HSPA) and 2G (GSM/GPRS/EDGE) engine:
Physical characteristics
- 3G bands: 900/2100 MHz for Europe
850/1900 MHz for America
5)
Supports SMS/USSD/Voice call /TCP/IP/UDP/SMTP/HTTP
Local and remote firmware update and configuration
Weight: approx. 130 g
Air humidity
- 2G bands: 850/900/1800/1900 MHz
5% up to 95% non-condensing
Interfaces
Internet (TCP/UDP/HTTP/SMTP)
Multi power-saving modes and wake up conditions
20 programmable Timers, Triggers, Counters, nvCounters
3000 programmable Geofences, 32 Areas, 2000 Waypoints
Multi channel GNSS (GPS+Galileo/GLONASS 2)) receiver
3 x Digital/analog IO ports (programmable)
A-GPS (online / offline / autonomous)
1 x Predefined digital input (Ignition)
Protocols: NMEA, FALCOM (binary)
3 x LED indicators ( programmable)
Report by distance, time, bearing and on demand and more
Accuracy:
GPS
GLONASS
Drivers Logbook / History / Trip management
4.0 m
FALCOM PREMIUM feature supported
Position:
2.5 m
Acquisition / Sensitivity:
Cold Start:
29 s
Tracking:
-161 dBm
Sensitvity: -148 dBm
Over-the air-access (OTA)
GPS Operational limits:
Intelligent and flexible configuration alarms
RFID and 1-Wire sensor-based application
Velocity:
30 s
-158 dBm
-145 dBm
Sleep mode:
Serial Ports: 4800...115200 bps (default = 115200 bps)
2G-3G / GNSS Antennas
Internal and external2) with automatic/manual switch
+10,8 V to +32,0 V DC
1)
Sensor / Measurement range
3-axis Acceleration/Temperature
50mA @ 12 VDC
- 3DG: ± 8g (programmable)
- Temperature: - 50 to + 120 °C (programmable)
< 1mA @ 12 VDC
Environmental data
Fleet management / monitoring
Operating temp.:
Security / Emergency / Insurance services (UBI)
Real time satellite navigation
Territory management
Processor core
Storage temp.:
-40 °C to +85 °C
-40 °C to +85 °C
GSM:
Battery3) discharging temp. :
-40 °C to +85 °C
-20 °C to +60 °C
Battery3) charging temp.:
Personalized drivers logbook
1)
Route verification
2)
3)
Trip management / distance calculations
4)
5)
Theft protection
1 x CAN-Bus Interface2) 4) (uses 2 of 3 I/Os)
1 x Inside SIM card holder for 1,8/3 V SIM cards
1 x USB 2.0 interface
Optional Li-Polymer 1000 mAh rechargeable battery
Real time online tracking
1 x 4pin audio jack interface (2.5mm) 5)
Serial Data Rates
Average Power Consumption
Normal operation:
1 x 10pin Mini-USB connector (for IOBOX-MINI 1))
1 x 1-Wire interface (incl. 5V Phantom Power)
1 x I²C interface
50.000 m
1 Hz
Electrical characteristics
Power supply:
2 x RS-232 Ports (1xV.24 level; 1xRS-232/RS-4852) 4))
500 m/s (972 knots)
Altitude:
Update rate:
APPLICATIONS
Dimensions (LxWxH): 105 mm x 83 mm x 28 mm
RTC + Calendar
8 MB Flash (History / Firmware / Configuration)
0 °C to +45 °C
Optional / Accessory
Activation with PFAL-Command.
Applicable with backup battery
Hardware Premium Features: CAN-Bus-interface, RS-485 port
Supported by FOX3-3G-AUDIO only
Storage and using conditions of the device with battery option are limited to the battery temperature range.
Driving behaviour / Eco-Drive monitoring
FOX3-3G PROMOTION KIT
Toll collection / pay as you drive (PAYD)
Compatible with FALCOM trace4you server (also
configurable for most of TCP/IP server-based tracking
applications)
PROMOTION KIT for FOX3/-3G devices provides all the necessary hardware, software,
and access data to the online documentation and FALCOM trace4you server to easily and
quickly evaluate these products and all thier functionalities. This kit consists of:
trace4you evaluation platform
11 - AC/DC Power adapter 12V-1A
1 - FOX3 unit, pre-configured
12 - UK/US Plug travel adapter
2 - PREMIUM-FEATURES (all activated)
13 - Instruction sheet
3 - Control-Box
14 - Info-sheet with access data to online
4 - Backup battery
documentation and FALCOM trace4you server
5 - FAL-ANT-11 or FAL-ANT-12
15 - Pre-paid SIM card. Service fee includes 10MB
8 - USB to Serial Converter
of data transfer and 3 months access to the
9 - CA31 - Main port installation cable + UCOM
trace4you server for evaluation purposes
10 - CA69 - Accessory port cable + UCOM
16 - 8 hours free technical support
CONTACT
GNSS satelites
FALCOM GmbH
Gewerbering 6
98704 Langewiesen
GERMANY
3G/GPRS/EDGE
Network
Mobile Unit (FOX3-3G)
installed on a truck
Falcom trace4you
tracking software
Phone:
Fax :
e-Mail:
+49 (0)3677 8042 0 (no support)
+49 (0)3677 8042 256
[email protected]
Internet: http://www.falcom.de/
Version: 1.0.6 Copyright © 2015, FALCOM GmbH
trace4you Fleet
User Interface
Specifcations and information given in this document are subject to change by FALCOM without notice. For latest product information visit: http://www.falcom.de
2
http://www.falcom.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement