Freedom System Specification Brochure

Freedom

®

Adhesive Dispensing Systems

System and Component Specifications

2 | Freedom Adhesive Dispensing Systems

Freedom

®

Adhesive Dispensing Systems

Packaging Equipment that Pays You Back

Freedom Series Melter n

Tankless, virtually eliminates char n

Saves energy n

Fast system start up n

Flexible mounting and integration

Integrated Adhesive

Filling n

Level monitoring window n

Quick change exhaust filter n

Quick-disconnect pump n

Removable cyclone top

Type of System

Maximum Pump Rate

Filter Type

Maximum Working

Hydraulic Pressure

Temperature Range

Ambient Temp. Range

Temp. Control Stability

Input/Output Capability

Hose Ports

Electrical Service

Transformer Option

Melter Enclosure Rating

Melter Weight (empty)

Dimensions W x H x D

Installation mm (in)

Tankless, automatically filled, non-circulating, 15:1 dual acting piston pump

33 kg/hr (72 lb/hr) at

90 strokes/min

Inside/out

10.3 MPa (1500 psi)

40 to 204°C (100 to 400°F)

0 to 40°C (32 to 104°F)

± 0.5°C (±1°F)

4 inputs & 3 outputs

Up to four

200 to 240 VAC, 1 or 3 phase,

50/60 Hz

1 phase N/PE 50/60 Hz

400/230 VAC

400/480 VAC 3 phase 50/60 Hz,

15 kVA

9 to 12 kg/hr (20 to 27 lbs/hr) Melt Rate (per hour)

Maximum Hose/Applicator

Power Capacity

2 hoses/applicators

4 hoses/applicators

2000 W*

4000 W*

*2000 W per 2 hose/2 applicator pair: 1200 W per hose/applicator pair and 1000 W per single channel

IP 54

45.4 kg (100 lb)

838mm x 533mm x 279mm

33" x 21" x 11"

Service Envelope (WxHxD)

889mm x 787mm x 406mm

35" x 31" x 16"

Adhesive Forms Pellets

Maximum Size 7.0 mm (0.275 in) spherical

Adhesive Transfer

Maximum Rate

Operating Air (Dynamic)

275 kg/hr (600 lbs/hr)

(dependent on adhesive type)

Minimum Pressure 2.75 bar

(0.275 Mpa or 40 psi)

Maximum Pressure 5.5 bar

(0.55 Mpa or 80 psi)

Operating Air (Static)

Total Air Consumption

Maximum Pressure 6.9 bar

(0.69 Mpa or 100 psi)

17 CFM at 3.4 bar (50 psi) to transfer 105.3 kg/hr (223.2 lb/hr) with a 4-m hose at a 4-m rise

22 CFM at 4.1 bar (60 psi) to transfer 112.5 kg (248 lb/hr) witha

9-m hose at a 4-m rise

30 CFM at 6.2 bar (90 psi) to transfer 90.7 kg/hr (200 lb/hr) with an 18-m hose at a 4-m rise

Dry, non lubricated Conditioning

Air Inlet Connection 3/8" NPT

Transfer Pump Type Venturi

Filter Mesh Size 6 MERV

Adhesive Storage Container 40Kg (88 lb) usable with grate

Capacity 64 Kg (141 lb) usable without grate

Enclosure Rating IP54

Freedom Adhesive Dispensing Systems | 3

Optix Controls n

Text-based fault and diagnostic messaging n

Component identification functionality n

Choice of languages n

Touch screen GUI

Freedom Series Hoses n

Energy saving n

Easy routing with mounts n

Component I.D. enabled

Program Storage

Service Intervals

Password Protection

Touch Screen

EcoBead™ Intermittent Bead Capability

Adhesive Savings 30-40-50-60%

Pre-programmed Patterns

Beads per Product

10 per glue savings selection

(total of 40)

1 to 8

System Inventory

Automatically Identified

Components

Displayed Information

Electronic Nameplate

Information

Hoses, applicators, melter

Part number, serial number, installation date

Watts, amps, voltage

Input/Output Interface

Inputs

Input Voltage

Outputs

Output Type

Contact Rating

Temperature Control

Stability

Temperature Range

PID Control Values

50 with customer-defined name

1 customer settable

(with customer-defined name)

3 levels, numerical

7-inch color, (800 x 480 WVGA)

4, customer assignable functions

10 to 30 VDC, polarity insensitive

3, customer assignable functions

N.O. potential free contact.

All open when melter is off

240VAC @ 2A and 30VDC @ 2A

± 0.5°C (±1°F)

40 to 204°C (100 to 400°F)

Optimized by component I.D.

Maximum Operating Temperature

Maximum Hydraulic Pressure

Input Voltage

204°C (400°F)

10.34 MPa (1500 psi) diameter

240 VAC

Freedom Series

Applicators n

Single body for multiple module types n

Industry best service life n

Self-cleaning modules

Operating Temperature

Operating Air Pressure ¹

204°C (400°F) maximum

3.4 to 5.5 bar (50 to 80 psi)

Working Hydraulic Pressure 103 bar (1500 psi) maximum

Nozzles MiniBlue® II: Saturn®, standard

MiniBlue II SureBead®:

.008, .012,.016,.020,.032,.040

Saturn® Solenoid Valves Single module: SP, 4-way, 24 VDC

Multi module: SP multi-module,

4-way, 24 VDC

Electrical Service 240 VAC, 50/60 Hz initial

200 VAC, 50/60 Hz optional

Maximum Cycle Rate 8000/min

Minimum Bead Deposition 2ms (adhesive dependent)

Adhesive Viscosity

Hydraulic Seal

500 to 1500 cps optimal

500 to >5000 cps capability

Elastomer bellow (long service life)

Start Saving Now

The typical Freedom system pays for itself in 12 months or less and continues to save you money throughout the life of the system.

For more information, talk with your Nordson representative or contact your Nordson regional office.

United States Canada Europe

Duluth, Georgia Markham, Ontario Erkrath, Germany

Telephone: 800.683.2314 Telephone: 800.463.3200 Telephone: 49.211.9205.0

Facsimile: 866.667.3329 Facsimile: 905.475.8821 Facsimile: 49.211.254.658

Japan Asia/Australia/Latin America

Tokyo, Japan Amherst, Ohio

Telephone: 81.3.5762.2700 Telephone: 440.985.4797

Facsimile: 81.3.5762.2701 Facsimile: 440.985.1096

www.nordsonadhesive.com

Nordson Corporation

PKL-13-5787

All rights reserved.

Printed in U.S.A.

© 2013 Nordson Corporation

Re-issued 10/2015