Catalogue Sheet: Mini Invisilite
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
Supply and install Ready-Lite® Mini Invsilite™ Series. The unit shall be designed to be completely concealed
in walls with a cavity. The equipment shall consist of a metal housing containing two modules joined by a
flexible bracket and electric conduit. One module contains the power transformer and electrical connection
box; the other module contains the emergency lights installed on the back of a door able to rotate several
turns of 360°. The unit equipment shall be completely concealed in the wall, after the installation through a
rectangular opening not larger than 8.25” by 5.75”.
In stand-by mode, the only visible parts of the unit shall be the off-white flat door and trim plate that can be
customized on site with paint or other suitable wall covering. Upon AC power supply the unit will expose the
emergency heads by rotating its door 180° and then will power the lamps. At the end of the AC power, the
lamps will turn off and the unit will retract the heads by rotating the door 180° in the same direction.
The unit shall not require the presence of AC power in order to close the door and conceal the lights. The door
of the unit shall be easy to force-turn (open or close) by hand. The light source shall be 12V MR16 halogen
lamps of specified wattage and light output.
The remote unit shall be the Ready-Lite model:
®
REPLACEMENT LAMPS
MODEL
TYPE
VOLTAGE/WATTAGE
580.0080-Rl
MR16 flood
12V-12W
580.0064-RL
MR16 flood
12V-20W
580.0083-RL
MR16 flood
12V-35W
580.0076-RL
MR16 flood
12V-50W
580.0068-RL
MR16 IR flood
12V-20W high output
580.0090-RL
MR16 IR flood
12V-35W high output
580.0089-RL
MR16 IR flood
12V-50W high output
580.0093-RL
MR16, LED
12V-4W
580.0104-RL
MR16, LED
12V-5W
580.0106-RL
MR16, LED
12V-6W
MINI INVISLITE
SERIES
™
For AC Power Generator
FEATURES
• Easy to retrofit in finished walls: the unit
slides in through an 8.25” by 5.75” hole
• No back-box needed to pre-install
• Output: 12VDC with up to 100W of
power
• Direct connection to 120, 277 or
347VAC power generators
• Emergency lights: MR16 halogen and
MR16 LED lamps
• Certification: CSA C22.2 No. 141
For the complete list, please see the lamp chart on pages 166 to 168
DIMENSIONS
Dimensions are approximate and subject to change.
3-1/2” [8.9cm]
COMPLETE UNIT
17-5/8” [44.9cm]
5-1/4” [13.2cm]
7” [17.8 cm]
9-1/8” [23.2cm]
INSTALLED UNIT
7-3/4” [19.7cm]
ORDERING INFORMATION
SERIES
MH
UNIT CAPACITY
G= remote AC generator, maximum 100W
LAMP WATTAGE (12V MR16)
/LD7= 2X MR16 LED, 12V-4W
/LD9= 2X MR16 LED, 12V-5W
/LD10= 2X MR16 LED, 12V-6W
/12W= 2X MR16 halogen, 12W
/20W= 2X MR16 halogen, 20W
/35W= 2X MR16 halogen, 35W
/50W= 2X MR16 halogen, 50W
/20WH= 2X MR16 halogen, high lumen output, 20W
/35WH= 2X MR16 halogen, high lumen output, 35W
/50WH= 2X MR16 halogen, high lumen output, 50W
EXAMPLE: MHG12W
151
AC VOLTAGE
Blank= 120VAC
2= 277VAC
3= 347VAC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement