RoadHawk DC-1 Software Guide PDF

RoadHawk DC-1 Software

1: Download the latest software from here: http://shop.roadhawk.co.uk/roadhawk-dc-1-car-black-box-camera?software=1

2: Double click the ZIP file:

3: Double click to open the player

4: Once the player has loaded. Insert the SD card in to your computer.

(sd card needs to have been used in the camera before this step)

5: once the SD card is inserted. The software will read the files and populate the file list in the lower right hand corner.

6: Clicking “ALL” will display all videos on the SD card. “NORMAL” displays just the normal video files and “EVENT” lists only the event files created by the camera.

7: To play a file simply double click on it. The video will start to play automatically.

8: To delete a file, select the round button to the left of the file and press the delete button.

9: To save a file to your computer. Select the round button to the left of the file and select save.

This will bring up a standard windows save file dialogue box. User can choose where to save the file. From here, the file can be sent by email or web transfer service in the same way you would send a photo or standard video file.

10: To capture a JPG screen shot of the video. Play the video file until you reach the desired position. Then click the CAPTURE button. A save file dialogue box will open and the user can choose where the file is save to on the computer.

Description of controls

Camera Configuration:

1: An SD card that has been used in a camera must first of all be inserted in to the computer. Press the CONFIG button.

Time Setting – Manually change the time setting of the camera.

Time Zone – change the time zone for the camera.

Video Quality – changes the quality of the video files

(lower quality will allow more video files to be stored on the SD card)

Recording Mode – Infinite only records normal video continually

- Infinite + EVENT allows the camera to create EVENT files if it detects an impact.

Speed Unit – displays the vehicle speed in the required unit.

3G Sensor – changes the sensitivity of the camera when creating EVENT files.

Car Number – You may enter the registration of the vehicle in this box.

2: Press OK to save changes. Remove the SD card and use in your camera.