Catalogue Sheet: RN Series

Catalogue Sheet: RN Series
Type:
new product
Project/Location:
Contractor:
Prepared By:
NEMA-4X
Date:
Made in Canada
Model No.:
TYPICAL SPECIFICATIONS
RN SERIES
NEMA-4X & NSF Certified
Pictogram Sign
FEATURES
• N
EMA-4X Certified
• NSF compliant for food processing
• Polymeric enclosure is fully gasketed
around lens and canopy to secure
against water leaks
• S
ealed, heavy-duty, vandal-resistant
polycarbonate face plate
• Suitable for cold weather: -40°C for AC/
DC and -20°C for Self-powered models
(option: -CW)
• Tamper-resistant, concealed test switch
with magnetic action
• White LED light source
• Supplied standard with two pictogram
films per face, for direction selection
• Meets or exceeds CSA 22.2 No.141-10
standard for pictogram Exit Signs
• U
niversal AC input: two-wire 120 to
347VAC; Standard DC input: two-wire
6 to 24VDC
• Energy efficient – consumes less than
2.5W in AC or DC-remote mode
• S
elf-powered models deliver two hours
of back-up lighting
Supply and install the Ready-Lite® RN Series pictogram Exit Signs. The equipment shall be certified for NEMA4X and designed specifically for high abuse areas, wet locations, and cold weather applications. The equipment
frame shall be of industrial grade polyvinyl chloride with a gasket around lenses and canopy. The faceplate(s)
shall be constructed of heavy-duty vandal-resistant polycarbonate and feature an even illuminated legend.
Each face plate shall come standard with two legend films for pictogram and direction selection. The light
source shall be white light-emitting diodes (LED). The pictogram Exit Sign shall operate with universal 2-wire
AC input voltage of 120 to 347VAC at less than 2.5W and universal 2-wire DC input voltage from 6 to 24VDC
at less than 1W for single and double face signs. The Self-powered model shall include a concealed green
pilot light and magnet-sensitive test switch, shall use a sealed Nickel-Cadmium battery of 2.4V nominal voltage
and shall stay illuminated during emergency operation for at least two hours upon AC failure. When specified,
the Self-powered model shall include auto-test functions: it shall execute automatic tests for 5 minutes every
30 days, 30 minutes every 60 days and two hours annually. When a fault is detected, the bi-colour pilot light
shall turn from green to red and flash following a particular code. The code description shall be visible on a
label next to the pilot light to identify the failure type: battery, charger circuitry, or LED lamps.
The pictogram Exit Sign shall be listed CSA 22.2 No.141-10 standard.
The equipment shall be Ready-Lite® Model:
N E M A - 4 X A N D N S F C E R T I F I E D FA M I LY
RNC Combo P. 64-65
TUF Exit P. 63
N-TUF Combo P. 66-67
TUF-NM Battery P. 128-129
TUF-NM Remote P. 160-161
WIRE GUARDS
460.0079-RL
460.0027-RL
460.0028-RL
wall mount
end mount
ceiling mount
POWER CONSUMPTION AND UNIT RATING
MODEL
AC SPECS
DC SPECS
AC-only
120 to 347VAC
less than 2.5W
-
-
AC/DC standard
120 to 347VAC
less than 2.5W
6 to 24VDC
less than 1W
AC/Special DC
120 to 347VAC
less than 2.5W
36, 48, 120VDC
less than 2.5W
Two-wire 120V AC/DC
120VAC
less than 2.5W
120VDC
less than 2.5W
Self-powered
120 to 347VAC
less than 3W
nickel-cadmium battery
min. 2 hours
Self diagnostic
120 / 347VAC
less than 3.5W
nickel-cadmium battery
min. 2 hours
DIMENSIONS
Dimensions are approximate and subject to change.
9-1/4” [23.4 cm]
14” [35.7 cm]
13-1/4” [33.6 cm]
3-7/8” [9.9 cm]
3-1/2” [8.7 cm]
DOUBLE
FACE
SINGLE
FACE
< PICTOGRAM
LEFT FROM HERE
PICTOGRAM
STRAIGHT FROM
HERE
PICTOGRAM >
RIGHT FROM HERE
ORDERING INFORMATION
SERIES
FACES/ MOUNTING
COLOUR
RN= NEMA-4X &
NSF pictogram
exit sign
1= s ingle face universal
mounting
2= d
ouble face
universal mounting
B= black
W= factory
white
VOLTAGE
SP= self-powered, 120 to 347VAC
SPD= self-powered diagnostic NiCad, 120 to 347VAC
SPD2= self-powered diagnostic NiCad, 120 to 277VAC
U= universal, 120 to 347VAC; 6 to 24VDC
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
2120= 2-wires 120VAC/VDC
NEX= NEXUS® system interface, 120/347VAC
NEX2= NEXUS® system interface, 120/277VAC
NEXRF= NEXUS® system interface, 120/347VAC
NEXRF2= NEXUS® system interface, 120/277VAC
EXAMPLE: RN1BSPCW
64
OPTIONS
CW= cold-weather (-20°C
for SPD, SPD2 and
NEXUS® only)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement