C0810J5003AHF Data Sheet Rev A
Model C0810J5003AHF
Rev A
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
Description
The C0810J5003AHF is a low cost, low profile sub-miniature high
performance 3 dB coupler in an easy to use surface mount package. It is designed
for 800 – 1000MHz applications including: GSM, WCDMA, CDMA and 900MHZ
ISM applications. The C0810J5003AHF is ideal for balanced power and low noise
amplifiers, plus signal distribution and other applications where low insertion loss
and tight amplitude and phase balance are required. The C0810J5003AHF is
available on tape and reel for pick and place high volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE
composites which possess excellent electrical and mechanical stability having X and
o
Y thermal coefficient of expansion (CTE) of 17 ppm/ C.
Detailed Electrical Specifications: Specifications subject to change without notice.
Extended Band
Features:
• 800 – 1000 MHz
• 0.68 mm Height Profile
• GSM, WCDMA & 900 MHz
ISM
• Surface Mountable
• Tape & Reel
• RoHS Compliant
• Halogen-Free
Parameter
Min
Frequency
Port Impedance
Return Loss
Isolation
Insertion Loss*
Amplitude Balance
Phase Balance
Power Handling
Operating Temperature
700
18
18
Typ
Nominal Band
Max
Min
1000
800
50
28
21
0.5
0.6
4
-55
Typ
21
18
0.6
0.9
7
4
+85
50
31
23
0.5
0.6
4
Max
Unit
1000
MHz
Ω
Ω
dB
dB
dB
Degrees
Watts
ºC
0.6
0.9
7
4
+85
-55
25°C
Outline Drawing
Top View (Near-side)
.079±.004
[2.00±0.10]
Side View
Bottom View (Far-side)
4X .026 [0.65]
.027±.002
[0.68±0.05]
1
.049±.004
[1.25±0.10]
3
6X .009
[0.22]
.039 [0.98]
Orientation
Marker Denotes
Pin Location
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
2
Pin
1
2
3
4
5
6
Designation
Input
GND
Isolated
Direct
GND
Coupled
6
5
6X .012
[0.30]
4
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C0810J5003AHF
Rev A
Typical Broadband Performance: 500 MHz. to 8000 MHz.
Insertion Loss
0.0
-3
-3.0
-6
-6.0
-9.0
-12
-12.0
-15
-15.0
Isolation
0
-3
-6
-9
-12
-15
-18
-21
-24
-27
-30
-33
8000
7500
7000
6500
6000
5500
5000
4500
4000
3500
-36
3000
7000
7500
8000
7000
7500
8000
5000
5000
4500
4000
3500
3000
2500
2000
1500
Frequency [MHz]
Frequency [MHz]
2500
1000
8000
7500
7000
6500
6000
5500
5000
-360
4500
-288
-10
4000
-216
-8
3500
-144
-6
3000
-4
2500
-72
500
0
-2
2000
6500
72
0
2000
6500
144
2
1500
6000
4
1000
5500
216
1500
6000
288
6
500
5500
8
deg
360
1000
4500
Phase Balance
10
500
[dB]
Amplitude Balance
[dB]
4000
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
USA/Canada:
Toll Free:
Europe:
3500
3000
2500
500
8000
7500
7000
6500
6000
5500
5000
4500
4000
3500
-36.0
3000
-33.0
-36
2500
-30.0
-33
2000
-27.0
-30
1500
-24.0
-27
1000
-21.0
-24
2000
-18.0
-21
1500
-18
1000
[dB]
-9
500
[dB]
Return Loss - Input
0
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
Model C0810J5003AHF
Rev A
Typical Performance: 700 MHz. to 1100 MHz.
Insertion Loss
Return Loss - Input
0.0
0
-0.3
-6
-0.6
-0.9
-1.2
-15
-1.5
-3.6
700
Frequency [MHz]
Frequency [MHz]
Phase Balance
Amplitude Balance
20
15
1
10
0.5
5
-0.5
-5
700
1100
1000
-20
900
-15
-2
800
-10
700
-1
-1.5
Frequency [MHz]
1100
0
1000
0
900
deg
1.5
800
2
[dB]
1100
-3.3
-36
1100
-3.0
-33
1000
-2.7
-30
900
-2.4
-27
800
-2.1
-24
1000
-1.8
-21
900
-18
800
[dB]
-9
-12
700
[dB]
-3
Frequency [MHz]
Isolation
0
-3
-6
-9
-12
-18
-21
-24
-27
-30
-33
1100
1000
900
800
-36
700
[dB]
-15
Frequency [MHz]
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Model C0810J5003AHF
Rev A
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical
o
and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ C.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
6X .014
[0.35]
4X .012
[0.30]
6X .013
[0.33]
.026
[0.66]
6X .002
[0.05]
4X Transmission
Line
Plated thru
holes to
ground
Circuit Pattern
Footprint Pad (s)
Solder Resist
Dimensions are in Inches [Millimeters]
Mounting Footprint
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
Model C0810J5003AHF
Rev A
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information.
ØA
ØC
ØD
QUANTITY/REEL
4000
TABLE 1
REEL DIMENSIONS (inches [mm])
ØA
7.00 [177.8]
B
0.32 [8.0]
2.0 [50.8]
ØC
ØD
0.512 [13.0]
B
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Anaren:
C0810J5003AHF
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement