Samlexpower | CHAMP 24-20 | Specification | Samlexpower CHAMP 24-20 Specification

POWER CONVERSION PRODUCTS
Champ Series Battery Chargers
FEATURES
Advanced switch-mode design
Waterproof (IP 65) and shockresistant
Easy Mounting system
Fully automatic operation
Light weight and compact
Reverse polarity connection protected
12 Volt and 24 Volt models
2 Year Warranty
APPLICATIONS
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
20 AMPS
TECHNICAL SPECIFICATIONS
Model
CHAMP 24-20
Nominal Input Voltage
195-270 Vac
Input Frequency
Output Voltage
40-60 Hz
depending on selected charging curve, (28,8/29,4/31,6)
Output Voltage Float
27,4 (0V traction)
Output Amps
20 Amp
Quiescent Current Off
<1 mA
Quiescent Current On
N/A
Voltage Ripple
30 - 50 Mv (max)
Efficiency
91%
Humidity
0-100%RH
Mechanical Vibration
40 G according to standard IEC 60068-2-6
Operation Temperature
-25ºC - +40ºC
Storage Temperature
-55ºC - +85ºC
Protections
Short circuit by internal electronics
Reverse polarity protection by nternal electronics.
Temperature compensated charging by temp sense in minus battery
connector ((>50 degrees on battery=charger off)
Output Banks
Dimensions (LxWxH)
Weight
1
192x98x47 mm
1,90 Kgs.
Technical Specifications subject to change without notification.
To view a full selection of Samlex products visit our website at:
www.samlex.com or www.samlex-solar.com

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project