Coby HDR700 - Portable HD Radio System Specification

Coby HDR700 - Portable HD Radio System Specification
Section
3
Home Audio/Theater
Contractor Series In-Wall and Ceiling Speakers
This cost effective series of architectural speaker systems are designed to provide very good sound
performance for the cost. Despite their “entry level” position in the Stellar Labs® line-up, these speakers
match performance of others mid level and even some premium installed systems. Installation in existing
wallboard is fast and easy using proven rotating plastic clips. And using a connection method borrowed
from the commercial sound industry, detachable screw terminal strips greatly ease installation while
providing a far superior connection to push terminals. Features: •Polypropylene cone woofer with butyl
rubber surround •Pivoting silk dome tweeter •6dB/octave crossover •Rust proof perforated aluminum grill
•Detachable phoenix style connector •Ceiling and in-wall speakers are sold in pairs, center channel
speaker is sold individually
3
Home Audio/Theater
Amplifiers . . . . . . . 48, 50
Breathe Audio . . . . . . . . 50
CD Players . . . . . . . . . . 58
Ceiling
Speakers . . . . . 44~47, 50
Coby . . . . . . . . . . . . . . 61
D/A Converter . . . . . . . . 54
DVD Players . . . . . . 59~61
HD Radio . . . . . . . . . . . 60
Indoor/Outdoor
Speakers . . . . . . . . 55~57
Infrared Repeaters 52, 53
In-Wall Speakers . . 44~47
i-Port . . . . . . . . . . . . . . 51
LCD Television . . . . . . . 61
MCM Custom
Audio . . . . . 46~48, 53~57
MG Electronics . . . . . . . 56
Phono Preamplifiers . . . 54
Receivers . . . . . . . . 58~60
Sherwood . . . . . . . . . . . 58
Sony . . . . . . . . . . . 59~60
Speakers
(freestanding) . . . . . 55~57
Speaker
Distribution 46, 47, 49, 51
SpeakerCraft . . 48, 51~53
Speco Technologies . 47, 50
Subwoofers . . . . . . . . . 57
Volume Controls . . . 51~55
Dual 51⁄4" In-Wall Center
Channel Speaker
Intended for use in home theater installations as a
horizontal center channel speaker, this dual woofer system
is also perfectly suitable in vertical arrangement as a front
or rear speaker in the home theater, as well as whole house
distributed audio. Shielded woofers solve issues with older
CRT monitors, and independent high and low frequency
compensation enable tailoring to the individual
environment. Features: •Dual 51⁄4" poly cone woofers
with rubber surrounds •1" pivoting silk dome tweeter
•Treble compensation selector +/0/–3dB •Bass
compensation selector +/0/–3dB •Microperforated
aluminum grill Specifications: •Power capacity:
55W/80W RMS/peak •Frequency response: 60Hz~22KHz
(±3dB) •Sensitivity: 90dB (W/M) •Impedance: 8ohm
Mounting: •Overall frame: 71⁄2" (H) x 165⁄8" (W) •Required
cutout: 51⁄2" (H) x 15" (W) •Depth: 31⁄2" •Sold individually
Order #
50-10520
MSRP
$99.00
(1-3)
$49.99
61⁄2" Ceiling
Speaker Pair
Popular size ceiling speaker is perfect for background or
foreground music in whole house distributed audio and
home theater environments. Their low cost also makes
them suitable in large scale commercial music and paging
environments. The mounting frame has a 30° offset,
allowing proper aim when mounted close to walls and
corners. Features: •61⁄2" poly cone woofer with rubber
surround •1" pivoting silk dome tweeter •Cloth backed
micro-perforated aluminum grill Specifications: •Power
capacity: 40W/60W RMS/peak •Frequency response:
65Hz~20KHz (±3dB) •Sensitivity: 88dB (W/M)
•Impedance: 8ohm Mounting: •Overall frame:
9.375" (dia) •Required cutout: 8.10" (dia)
•Depth: 5" •Speaker system is sold in pairs
8" Ceiling Speaker Pair
Order #
50-10510
Order #
50-10511
MSRP
$119.00
(1–3 prs.)
$59.99
(4 prs.–up)
$53.96
Full size ceiling speaker is perfect for background or
foreground music in whole house distributed audio and
home theater environments. Their low cost also makes
them suitable in large scale commercial music and paging
environments. The mounting frame has a 30° offset,
allowing proper aim when mounted close to walls and
corners. Features: •8" poly cone woofer with rubber
surround •1" pivoting silk dome tweeter •Micro-perforated
aluminum grill Specifications: •Power capacity:
80W/55W RMS/peak •Frequency response: 60Hz~20KHz
(±3dB) •Sensitivity: 89dB (W/M) •Impedance: 8ohm
Mounting: •Overall frame: 11.5" (dia) •Required cutout:
10" (dia) •Depth: 5.25" •Speaker system is sold in pairs
MSRP
$159.00
(1–3 prs.)
$79.99
(4 prs.–up)
$71.96
(4-up)
$44.96
8" Single Point
Stereo Ceiling
Speaker
Intended for small
areas that do not
justify installation
NEW!
of two speakers, this
single stereo speaker
provides both left and right audio channels, from a single
point. Two independent crossover channels, two separately
mounted tweeters, and a dual voice coil woofer provide an
outlet for both left and right channels, from one 8"
mounted speaker. It is perfect in entryways, bathrooms,
hallways and similar areas for background or foreground
music in whole house distributed audio and home theater
environments. Features: •8" poly cone woofer with rubber
surround •Dual 3⁄4" pivoting silk dome tweeters •Dual
6dB/octave crossovers •Cloth backed microperforated
aluminum grill Specifications: •Power capacity:
40W/60W RMS/peak per channel •Frequency response:
50Hz~22KHz (±3dB) •Sensitivity: 88dB (W/M)
•Impedance: 8ohm per channel Mounting: •Overall
frame: 11.5" (dia) •Required cutout: 10" (dia)
•Depth: 6" •Speaker system is sold individually
Order #
50-10580
page
44
(1–3)
$59.99
(4–up)
$53.96
8" In-Wall
Speaker Pair
61⁄2" In-Wall Speaker Pair
Compact in–wall speaker is perfect for background
or foreground music in whole house distributed audio
and as front or rear speakers in home theater environments.
Their low cost also makes them suitable in large scale
commercial music and paging environments. Features:
•61⁄2" poly cone woofer with rubber surround •1" pivoting
silk dome tweeter •Cloth backed micro-perforated
aluminum grill Specifications: •Power capacity:
40W/60W RMS/peak •Frequency response: 65Hz~20KHz
(±3dB) •Sensitivity: 88dB (W/M) •Impedance: 8ohm
Mounting: •Overall frame: 12" (H) x 8.25" (W)
•Required cutout: 10.25" (H) x 6.5" (W) •Depth: 3"
•Speaker system is sold in pairs
Full size in–wall speaker is perfect for background or
foreground music in whole house distributed audio and
as front and rear speakers home theater environments.
Their low cost also makes them suitable in large scale
commercial music and paging environments. Features:
•8" poly cone woofer with rubber surround •1" pivoting
silk dome tweeter •Cloth backed micro-perforated
aluminum grill Specifications: •Power capacity:
55W/80W RMS/peak •Frequency response: 60Hz~20KHz
(±3dB) •Sensitivity: 89dB (W/M) •Impedance: 8ohm
Mounting: •Overall frame: 14.25" (H) x 10.25" (W)
•Required cutout: 12.25" (H) x 8.75" (W) •Depth: 3.5"
•Speaker system is sold in pairs
Order #
50-10500
Order #
50-10501
MSRP
$119.00
1-800-543-4330
Fax: 1-800-765-6960
(1–3 prs.)
$59.99
(4–up prs.)
$53.96
MSRP
$159.00
NET 30
Terms
Customer Service: 1-877-626-3532
(1–3 prs.)
$79.99
(4 prs.–up)
$71.96
Home Audio/Theater
Premium Series In-Wall and Ceiling Speakers
High end architectural speaker systems require specific components and features in order to provide superior quality
sound performance. While these components carry a higher cost, the difference need not be on an order of magnitude.
The Stellar Labs® Premium Speaker Series is designed to provide optimum sound quality, without surpassing the point
of diminishing return on expense. Honest-true specifications, thorough product design with no-nonsense components
and special attention to finished appearance create a product that provides unmatched sound performance for the
dollar. Features: •Aluminum cone woofer with butyl rubber surround •Pivoting aluminum dome tweeter •12dB/octave
crossover •High and low frequency compensation selectors •Large vented woofer magnet •Rust proof perforated
aluminum grill •Detachable phoenix style connector •Ceiling and in-wall speakers are sold in pairs, center channel
speaker is sold individually
Section
3
3
Dual 61⁄2" Premium
In-Wall Center Channel Speaker
8" Premium Ceiling
Speaker Pair
61⁄2" Premium
Ceiling Speaker Pair
Full size ceiling speaker size is perfect for background or
foreground music in whole house distributed audio and as
front or rear speakers in home theater environments. High
excursion woofers with extremely rigid aluminum cones
combine to provide very good low frequency extension.
The large vented magnet provides increased power
capacity. The mounting frame features a 30° offset,
allowing proper aim when mounted close to walls and
corners. Features: •8" aluminum cone woofer with rubber
surround •1" aluminum dome tweeter •Cloth backed
microperforated aluminum grill •12dB/octave crossover
•Selectable bass and treble compensation +3/0/–3dB
Specifications: •Power capacity: 70W/100W RMS/peak
•Frequency response: 45Hz~22KHz (±3dB) •Sensitivity:
89dB (W/M) •Impedance: 8ohm •Magnet size: 30 oz.
Mounting: •Overall frame: 111⁄2" (dia) •Required cutout:
10" (dia) •Depth: 51⁄4" •Sold in pairs
Highly popular ceiling speaker size is perfect for
background or foreground music in whole house
distributed audio and as front or rear speakers in home
theater environments. High excursion woofers with
extremely rigid aluminum cones combine to provide
very good low frequency extension. The mounting frame
features a 30° offset, allowing proper aim when mounted
close to walls and corners. Features: •61⁄2" aluminum cone
woofer with rubber surround •1" aluminum dome tweeter
•Cloth backed microperforated aluminum grill •12dB/
octave crossover •Selectable bass and treble compensation
+3/0/–3dB Specifications: •Power capacity: 55W/80W
RMS/peak •Frequency response: 50Hz~22KHz (±3dB)
•Sensitivity: 90dB (W/M) •Impedance: 8ohm •Magnet
size: 17 oz. Mounting: •Overall frame: 93⁄8" (dia)
•Required cutout: 75⁄8" (dia) •Depth: 5" •Sold in pairs
Order #
50-10561
Order #
50-10560
MSRP
$199.00
(1-3 prs.)
$119.00
(4 prs.-up)
$107.10
MSRP
$179.00
(1-3 prs.)
$99.99
(4 prs.-up)
$89.96
Intended for use in home theater installations as a
horizontal center channel speaker, this dual woofer system
is also perfectly suitable in vertical arrangement as a front
or rear speaker in the home theater, as well as whole house
distributed audio. Large dual 61⁄2" aluminum cone woofers
provide tremendous mid bass and low frequency response,
from a relatively narrow footprint. Shielded woofers solve
issues with older CRT monitors, and independent high
and low frequency compensation enable tailoring to the
individual environment. Features: •Dual 6.5" aluminum
cone woofers with rubber surrounds •1" pivoting
aluminum dome tweeter •Treble compensation selector
+3/0/–3dB •Bass compensation selector +/0/–3dB •Cloth
backed micro-perforated aluminum grill Specifications:
•Power capacity: 55W/80W RMS/peak •Frequency
response: 60Hz~22KHz (±3dB) •Sensitivity: 90dB (W/M)
•Magnet size: 18 oz. on each woofer •Impedance: 8ohm
Mounting: •Overall frame: 8.5" (H) x 18.75" (W)
•Required cutout: 6.5" (H) x 17" (W) •Depth: 3.75"
•Speaker system is sold individually
Order #
50-10570
MSRP
$135.00
(1–3)
$69.99
(4–up)
$62.96
Dual 8" In–Wall
Subwoofer
Full size in–wall
speaker is perfect
for background or
foreground music
in whole house
distributed audio
and as front or
rear speakers in
home theater
environments.
High excursion
woofer with extremely rigid aluminum cone combines to
provide very good low frequency extension. The oversized
magnet assembly is vented to provide increased power
capacity. This speaker will exceed the performance of
bookshelf speakers of over twice the cost. Features:
•8" aluminum cone woofer with rubber surround •1"
aluminum dome tweeter •Cloth backed microperforated
aluminum grill •12dB/octave crossover •Selectable bass
and treble compensation +3/0/–3dB Specifications:
•Power capacity: 70W/100W RMS/peak •Frequency
response: 45Hz~22KHz (±3dB) •Sensitivity: 89dB (W/M)
•Magnet size: 30 oz. •Impedance: 8ohm Mounting:
•Overall frame: 141⁄4" (H) x 101⁄4" (W) •Required cutout:
121⁄4" (H) x 83⁄4" (W) •Depth: 31⁄2" •Sold in pairs
Compact in–wall speaker is perfect for background or
foreground music in whole house distributed audio and as
front or rear speakers in home theater environments. High
excursion woofers with extremely rigid aluminum cones
combine to provide very good low frequency extension.
This speaker will match the performance of bookshelf
speakers of over twice the cost. Features: •61⁄2" aluminum
cone woofer with rubber surround •1" aluminum dome
tweeter •Cloth backed microperforated aluminum grill
•12dB/octave crossover •Selectable bass and treble
compensation +3/0/–3dB Specifications: •Power
capacity: 70W/100W RMS/peak •Frequency response:
45Hz~22KHz (±3dB) •Sensitivity: 89dB (W/M)
•Magnet size: 17 oz. •Impedance: 8ohm Mounting:
•Overall frame: 141⁄4" (H) x 101⁄4" (W) •Required
cutout: 121⁄4" (H) x 83⁄4" (W) •Depth: 31⁄2" •Sold in pairs
This Stellar Labs®
architectural speaker
system provides
outstanding bass
response in any listening
environment, without
occupying valuable floor
space. It is the perfect
addition to in–wall,
ceiling and small satellite
speakers in home theater,
whole house music or
large scale background
music installations. Two
hefty 8" woofers are fed from a passive 12dB/octave
200Hz low pass filter, allowing simple addition to existing
speakers (instructions in manual). Or, add any high-quality
free standing amplifier, such as our Stellar Labs®
SLA-150, and connect to a home theater receivers
subwoofer output. The dual 8" woofers provide cone
surface area of nearly that of a 12" woofer, yet may be
mounted within a standard 2 x 4 wall cavity. The rugged
ABS molded frame features eight rotating clips for direct,
secure attachment to drywall, without the need for
additional hardware Features: •8" poly treated cone
woofers, each with 30 oz. vented magnet •Treated foam
surrounds •Dual channel 12dB/octve low pass filter
•White steel grill •Detachable phoenix style connectors
Specifications: •Power capacity: 100W/200W RMS/peak
per channel •Frequency response: 45Hz~200Hz
•Impedance: 8ohm per channel •Sensitivity: 91dB (W/M)
•Dimensions (overall): 203⁄4" (H) x 113⁄8" (W) •Required
cutout: 191⁄4" (H) x 83⁄4" (W) •Mounting depth 33⁄4"
•Sold individually
Order #
50-10551
Order #
50-10550
Order #
50-10575
8" Premium
In-Wall
Speaker Pair
MSRP
$199.00
(1-3 prs.)
$119.00
(4-up prs.)
$107.10
Follow us on:
Product Questions Email: [email protected]
61⁄2" Premium
In-Wall Speaker Pair
MSRP
$179.00
(1-3 prs.)
$99.99
(4 prs.-up)
$89.96
MCMelectronics.com
Email: [email protected]
MSRP
$179.00
(1-3)
$99.99
(4-up)
$89.96
page
45
Home Audio/Theater
Section
3
Compact Ceiling Speaker System
✔Mounts in standard round ceiling box
✔Aluminum cone
✔Rubber surroud
Micro In-Wall
Speaker System
Rugged 21⁄2" driver is mounted in an attractive round
faceplate that is compatible with commonly available
ceiling fan electrical boxes, such as the B618R series
from Carlon (MCM #28-17060). Use in this manner
allows inconspicuous mounting in a variety of areas
where appearance is critical, or electrical codes are
an issue. When used alone, it is perfect for moderate
volume music and voice reproduction in public areas.
Used in pairs, and combined with a subwoofer, it is
perfect for any high fidelity audio application including
home theater and whole-house audio. Specifications:
•Power capacity: 20W/30W RMS/peak •Frequency
response: 100Hz~20KHz •Sensitivity: 85dB (W/M)
•Nominal impedance: 8ohm •Front panel diameter:
53⁄8" •Mounting depth: 13⁄4" •Sold individually
3
✔Mounts in a single gang box
✔Includes high pass capacitor
A rugged 2" full range driver
is mounted in an attractive
rectangular faceplate that is
the same size as a standard wall
switch or AC outlet. When used alone, it is perfect for
voice reproduction in public areas, on kiosks or retail
displays. Used in pairs, and combined with a subwoofer,
it is perfect for any high fidelity audio application
including home theater and whole-house audio. Specifications:
•Power capacity: 10W/20W RMS/peak •Frequency response:
300Hz~20KHz •Sensitivity: 85dB (W/M) •Nominal impedance: 8ohm •Front
panel dimensions: 45⁄8" (H) x 3" (W) •Mounting depth: 13⁄4" •Sold individually
Order #
50-7907
MSRP
$39.95
(1-3)
$26.99
Order #
50-9045
(4-up)
$25.95
MSRP
$59.95
ONLY
$24.99
Compact In-Wall Speaker System
✔Mounts in a double gang box
✔Aluminum cone
✔Rubber surround
Rugged 21⁄2" driver is mounted in an attractive square faceplate that is the same size as a double
gang wall switch or AC outlet. When used alone, it is perfect for moderate volume music and
voice reproduction in public areas, on kiosks or retail displays. Used in pairs, and combined
with a subwoofer, it is perfect for any high fidelity audio application including home theater and
whole-house audio. Specifications: •Power capacity: 20W/30W RMS/peak •Frequency response:
100Hz~20KHz •Sensitivity: 85dB (W/M) •Nominal impedance: 8ohm •Front panel dimensions:
47⁄8" (H) x 5" (W) •Mounting depth: 13⁄4" •Sold individually
Order #
50-7908
MSRP
$59.95
Ceiling Mount Speaker Pair
Low cost dual cone speaker pair is ideal for background
music, paging and general audio applications. White
plastic frame and painted steel grill compliments any
decor. Attached mounting brackets easily mount in
ceiling or wall board without additional hardware.
8ohm. Sold in pairs.
Speaker
Size
51⁄4"
61⁄2"
8"
Power Capacity RMS/Peak
15W/30W
15W/30W
20W/40W
Frequency Response
SPL
110Hz~20KHz 90dB
100Hz~18KHz 90dB
80Hz~20KHz
91dB
Overall Frame Diameter
8"
9"
103⁄4"
Cutout Hole
61⁄2"
71⁄2"
93⁄8"
(4-up)
$32.50
Five-Way Speaker Switch Box
4Efficient dual cone design
4Round ceiling mount
Order #
50-6240
50-6241
50-6242
(1-3)
$34.99
Mounting
Depth
MSRP
21⁄2"
$44.95
5
2 ⁄8"
59.95
33⁄8"
74.95
ONLY
$29.99
39.99
49.99
✔On/off control for five zones
✔Headphone jack
✔Compact size
Maintains 8ohm load when up to five sets of 8ohm
speakersare used. Places 100ohm load when all
speakers are switched off. Front panel 1⁄4" headphone
jack allows monitoring of the source. 200W maximum
power capacity. Metal case has non-skid rubber feet and
stays securely in place. Dimensions: 81⁄8" (W) x 21⁄4" (H) x
35⁄8" (D). Sloped front, black color.
Order #
50-6200
(1-5)
$24.99
(6-9)
$22.95
(10-up)
$20.95
Four Pair Speaker Selector Switch
Controls up to eight pairs of speakers with 250W/750W
RMS/music power capacity. High power transformers
with selectable taps allow you to obtain maximum power
transfer while maintaining a safe load of 4ohm or higher.
Because the system is capable of transforming a 1⁄3ohm
load to appear as a 4ohm load, several speaker pairs may
be used on a single switch position. The left and right
channels are completely isolated, allowing compatibility
with any amplifier. Rear mounted terminal strip which
accepts up to 10AWG wire. Dimensions: 17" (W) x
31⁄2" (H) x 6" (D).
Allows simultaneous operation of up to four pairs of
8ohm or 16ohm speakers. Automatic load protection
ensures that the amplifier sees a 4ohm or higher load,
regardless of speakers selected. The built-in protection
circuit inserts resistance only when more than two pairs
of speakers are selected. This ensures that maximum
power is delivered to the speakers. Additional resistance
is inserted only when needed. Amplifier A/B switch
allows selection from two different sources allowing
greater flexibility. Left and right channels are fully
isolated from each other, allowing compatibility with
any type of amplifier. Thermo-Tek™ circuit protects
switch and components in the event of an overload
situation. Power capacity 40W/120W RMS/program.
Rear mounted terminal strip accepts up to 10AWG wire.
Dimensions: 17" (W) x 2" (H) x 5" (D). Black color.
Order #
50-5705
Order #
50-2075
High Power 12 Pair Speaker Switch
Controls up to 12 pairs of speakers with 250W/750W
RMS/music power cpacity. High power transformers
with selectable taps allow maximum power transfer
while maintaining a safe load of 4ohm of higher. System is
capable of transforming a 1⁄3ohm load to appear as a 4ohm
load, several speaker pairs may be used on a single switch
position, allowing more than 12 pairs of speakers to be
connected. The left and right channels are completely
isolated, allowing compatiblity with any amplifier.
Connections are made via rear mounted terminal
strip which accepts up to 10AWG wire. Self powered,
needs no AC supply. Dimensions: 17" (W) x 31⁄2" (H) x
6" (D). Black.
Order #
50-6440
page
46
MSRP
$499.00
(1-3)
$389.00
(4-up)
$340.00
High Power Eight Pair Speaker Switch
MSRP
$399.00
1-800-543-4330
Fax: 1-800-765-6960
(1-3)
$263.54
(4-up)
$251.99
MSRP
$199.00
NET 30
Terms
Customer Service: 1-877-626-3532
(1-3)
$110.25
(4-9)
$99.45
(10-up)
$89.71
Home Audio/Theater
Enclosed 6 ⁄2" Two-Way
Ceiling Speaker
1
Enclosed 8" Two-Way
Ceiling Speaker
Versatile ceiling speaker
is uniquely compatible in
high fidelity and commercial
sound applications. Two-way
coaxial design provides wide
frequency response, and a
multi-tap transformer allows
compatibility with both 8ohm and
70V commercial systems. Fully
enclosed, attached metal back-box ensures uniform
sound quality, regardless of mounting location, while
protecting the speaker from insulation debris and
temperature extremes. Rotating mounting clips allow
fast installation in to ceiling tile and drywall with no
additional hardware. Optional T-bar supports provide
necessary weight loading in drop ceilings. Specifications:
•Woofer: 8" poly cone with butyl rubber surround
•Tweeter: 1" dome •Power capacity: 60W/120W RMS/
peak •Frequency response: 47Hz~20KHz •SPL: 92dB
(W/M) •Transformer taps: 8ohm, 5W, 10W, 20W, 30W,
40W (rotary switch) •Overall frame diameter: 103⁄4"
•Required cutout: 91⁄4" •Mounting depth: 8"
•Sold individually
Order #
555-9100
555-6397
Order #
Description
MSRP
555-9110 Ceiling speaker $119.95
555-7891 T-bar support
-
MSRP
$99.95
-
(1-3)
$59.99
6.09
(4-up)
$55.95
5.79
(1-3)
$69.99
5.09
(4-up)
$62.50
4.69
MA Series Ceiling Speaker
Woofer Power Capacity Order #
Size
RMS/Peak
50-7535
51⁄4"
30W/60W
50-7536
61⁄2"
40W/80W
Frequency Response
57Hz~20KHz
34Hz~20KHz
SPL Overall Frame Cutout
(W/M)
Diameter
Hole
87dB
9.9"
8.2"
88dB
11.42"
9.74"
(1–3)
$48.99
58.99
(4–11)
$42.95
49.95
(12–up)
$39.95
46.95
Easy to install in–wall speakers are ideal for background music, paging, home theater or any
general music application. Their wide frequency response and above average power capacity
make them ideal as main, surround or background speakers. System consists of a woven
fiberglass, blue cone woofer, with rubber surround, and a 1" titanium swivel dome tweeter.
The addition of a molded PVC back–box ensures uniform sound quality regardless of
mounting location, while protecting the speaker from insulation debris and temperature
extremes. Rotating mounting clips allow fast installation in to drywall with no additional
hardware. All will mount in a standard 2 x 4 studded wall. Each speaker is 8ohm. Sold in pairs.
Woofer
Size 51⁄4" 61⁄2" 8" Power Capacity
RMS/Peak 40W/80W 60W/100W 80W/120W
Frequency
Response 55Hz~20KHz 50Hz~20KHz 50Hz~20KHz SPL
(W/M) 88dB 88dB 88dB Essential for distributed residential sound installations,
this terminal strip provides a convenient method of
connecting numerous pairs of speakers to a single pair of
binding posts. Input terminals are heavy-duty, gold plated
brass, five-way binding posts, which will accept single
or paired banana plugs or bare wire up to 8AWG. Each
output connection features detachable screw terminal
strips which accept up to 14AWG wire. Internal PC board
circuit is reinforced with internal point–to–point 14AWG
wiring, for improved current capacity. Compact size
allows easy location behind equipment. Screw holes
allow easy wall mounting and rubber feet are included
for shelf top use. Note: Terminal strip is straight parallel
connection and provides no impedance protection. It is
intended for use with 70V distributed speakers, or 8ohm
systems that utilize impedance matching volume controls.
Specifications: •Power capacity: 200W RMS per channel
•Dimensions: 2" (H) x 2.25" (W) x 10.5" (L), including
binding posts.
MSRP
$59.95
(1–3)
$35.99
(4–up)
$32.95
Multi Room Speaker Distribution Strip
Enclosed Two–Way In–Wall Speaker Pairs
Order # 50-6547 50-6548 50-6549 Multi Room Speaker Distribution Strip
Order #
50-2204
Completely enclosed ceiling speaker is the ideal all–purpose solution, covering a wide
variety of distributed commercial and residential sound applications. Internal 25V/70V
transformer taps are easily selected via the front baffle, allowing final volume balancing
to be done after installation. 8ohm position is provided for residential applications. Rear
back box provides protection to the speaker plus consistent sound, regardless of location.
Polypropylene cone woofers and ported enclosures provide extended frequency response
typical of much higher cost units. Features: •Rubber surround woofers •1" mylar dome
tweeter •Fire retardant ABS rear enclosure •White ABS frame with rotating mounting
clips •Easily installs to existing wallboard •Transformer taps: 0.25W, 0.5W, 1W, 2.5W,
5W, 7.5W, 15W, 30W, 40W (#50-7536 only) •Sold individually
3
3
Versatile ceiling speaker is
uniquely compatible in high
fidelity and commercial sound
applications. Two-way coaxial
design provides wide frequency
response, and a multi-tap
transformer allows compatibility with
both 8ohm and 70V commercial systems.
Fully enclosed, attached metal back-box ensures
uniform sound quality, regardless of mounting location,
while protecting the speaker from insulation debris and
temperature extremes. Rotating mounting clips allow
fast installation in to ceiling tile and drywall with no
additional hardware. Optional accessories: •Preconstruction brackets greatly ease installation in
drywall ceilings in new-work environments •T-bar
supports provide necessary weight loading in drop
ceilings. Specifications: •Woofer: 61⁄2" poly cone
with foam surround •Tweeter: 3⁄4" mylar dome •Power
capacity: 50W/100W RMS/peak •Frequency response:
50Hz~20KHz •SPL: 90dB (W/M) •Transformer taps:
8ohm, 1W, 2W, 4W, 7.5W, 15W (rotary switch) •Overall
frame diameter: 8" •Required cutout: 7" •Mounting depth:
43⁄4" Note: •Speakers and T-bar support sold individually
•Pre-construction brackets sold in pairs
Description
Ceiling speaker
T-bar support
Section
Overall Frame
Dimensions 11.75" (H) x 8.3" (W) x 3.6" (D) 12.0" (H) x 8.6" (W) x 4.25" (D) 14.0" (H) x 10.0" (W) x 4.1" (D) Designed for use in multi room sound distribution
installations where individual speaker selection is
not required. Impedance protection circuit allows up
to eight sets of 8ohm speakers to be connected to a
stereo amplifier, and appear as a 4ohm load. Completely
independent left and right circuits allow compatibility
with all amplifier types. Attached mounting plate allows
installation into standard 19" racks, or between studs
spaced on 16" centers. Features: •Color coded push
terminals accept up to 8AWG wire •Switchable impedance
protection •Non-inductive resistors for full frequency
response •Rugged aluminum housing with black finish
Specifications: •Power capacity: 120W program per
channel •Frequency response: 20Hz~20KHz
•Dimensions: 3.5" (H) x 19.0" (W) x 2.25" (D)
Order #
50-2202
Price Per Pair
(1–3) (4–11) (12–up)
$96.99 $87.00 $77.00
123.00 111.00 99.95
148.00 133.00 118.00
MSRP
$139.95
(1-3)
$89.99
(4-11)
$84.95
Speaker Selectors
✔Volume adjustment in each zone
✔A/B source selection
✔100W RMS capacity
Speaker Selector/
Distribution Panel
Impedance matching speaker selector/
distribution network is ideal in situations where up to ten pairs of speakers are to be connected to a single amplifier,
and individual on/off selection is required. Additionally, a two–position source selector allows global selection from
two different source systems. High–powered non–inductive resistors ensure that the speaker load never falls below
4ohm, even when all ten pairs of speakers are operating. Heavy–duty rocker switches are rugged enough for commercial
use, while remaining suitable for residential applications. Detachable terminal strips accept up to 14AWG wire. The
rugged steel panel is intended for 19" rack mounting, and occupies two rack spaces. Power capacity: 200W per channel.
Overall dimensions: 3.5" (H) x 19" (W) x 2" (D). Limited quantities.
Order #
50-7655
MSRP
$199.00
Follow us on:
Product Questions Email: [email protected]
ONLY
$59.99
Versatile speaker switches allows connection of up
two six pairs of speakers, to two different stereo sources,
with individual volume control of each pair. Volume
adjustment and impedance matching is accomplished
through internal heavy-duty multi-trapped transformers.
Rear screw terminal strips accept up to 14AWG wire,
and are removable, allowing easy connection of multiple
cables. Power capacity: 18W/50W RMS/program per
speaker, 100W/150W RMS/program total. Dimensions:
3" (H) x 17" (W) x 7" (D), including knobs.
Order #
50-6675
50-6676
MCMelectronics.com
Email: [email protected]
Speaker Pairs
Four
Six
(1–3)
$199.00
239.00
(4–up)
$194.00
233.00
page
47
Section
3
Home Audio/Theater
NEW!
NEW!
NEW!
3
#50-8850, 50-8851
Multi Zone Multi Channel
Contractor Amplifiers
Two Channel Stereo
Contractor Amplifier
Highly versatile amplifier is designed to power
additional zones in an existing whole house audio
system, or multiple zones, with external impedance
matching. Because it also includes speaker level inputs,
and auto switching, it can also be used to place a local
source on a pair of speakers connected to a separate
whole-house system. Four trigger modes: •Audio
sensing from a line or speaker level source •Video
sensing at composite video loop-through jack •12VAC/
DC trigger input •Current sensing AC accessory outlet
Features: •Speaker and line input •12VDC trigger
output •Recessed front panel gain controls with rear
bypass •Heavy-duty binding post speaker outputs
•Available in shelf top or 2RU rack mount
configurations Specifications: •Power output: 50W
RMS (8ohm), 65W RMS (4ohm) per channel •THD:
0.08% (8ohm load) •Dimensions: 31⁄2" (H) x 17" (W) x
81⁄2" (D)
Order #
50-8845
50-8846
Model #
AMP-BB50S
AMP-BB50S -R
Enclosure
Shelf top
Rack mount
ONLY
$499.00
519.00
#50-8855, 50-8856
Two Channel Stereo
Contractor Amplifiers
Highly versatile amplifiers are designed to individual or
multiple zones in whole house audio system. High current
design makes these amplifiers stable to 2ohm, allowing
connection of up to four pairs of speakers without
impedance concerns. Units may be manually powered
on/off, controlled via external trigger, or set for auto
sensing on the line level input. Features: •Line level
input with loop-through output •12VDC trigger output
•Front panel gain controls •Heavy-duty binding post
speaker outputs •Available in shelf top or rack mount
configurations Specifications: •Power output assumes
4ohm load •THD: 0.08% (8ohm load) •Dimensions:
see below (H) x 17" (W) x 141⁄2" (D)
Output Power
Order # Model #
RMS x 2CH Enclosure
ONLY
50-8850 AMP-BB275S 100W
Shelf top
$699.00
50-8851 AMP-BB275S-R 100W 2RU rack mount 719.00
50-8855 AMP-BB2125 180W
Shelf top
999.00
50-8856 AMP-BB2125-R 180W 3RU rack mount1019.00
Highly versatile amplifiers are available in four zone
(eight channel) and six zone (12 channel) configurations,
with either 35W or 65W per channel output, to suite a
variety of needs. Additionally, all models are available
with tabletop or rack mount chassis, providing a total
of eight solutions for a wide range of installation
requirements. Features: •Independent line inputs for each
channel pair •Selectable main bus input with loop through
output •Each amplifier input can be set to left, right or
summed mono source •Independent level trim for each
amplifier channel •Bridging capability between channel
pairs •3~30VAC/DC trigger input •Selectable auto-sensing
or 3~30VAC/DC trigger power ON/OFF •Heavy-duty
binding post speaker outputs Specifications: •Power
output assumes 8ohm load •See MCM website for
specific dimensions and distortion specifications
Order # Model #
Zones Output Power
ONLY
Shelf Top
50-8860 AMP-BB835
Four 35W RMS x 8CH $1079.00
50-8865 AMP-BB865
Four 65W RMS x 8CH 2149.00
50-8870 AMP-BB1235 Six 35W RMS x 12CH 1279.00
50-8875 AMP-BB1265 Six 65W RMS x 12CH 2699.00
Rack Mount
50-8861 AMP-BB835-R Four 35W RMS x 8CH 1099.00
50-8866 AMP-BB865-R Four 65W RMS x 8CH 2169.00
50-8871 AMP-BB1235-R Six 35W RMS x 12CH 1289.00
50-8876 AMP-BB1265-R Six 65W RMS x 12CH 2709.00
NEW!
Electronic System Cooler
Designed for use with SpeakerCraft multi zone amplifiers,
this cooling system can be used with any electronic
equipment with heat dissipation issues. Simply mount
above item in the rack, or place directly on top of
equipment for highly effective cooling. Remote trigger
accepts 3~24VDC signal from other equipment to turn on
fans. Temperature sensing, variable speed fans detect the
amount of heat being generated by components, adjusting
speed accordingly. Features: •Completely automatic
operation •3.5mm trigger in and out connections •Dual
whisper quiet brushless fans •Red LED power indicator
•Green LED fan “ON” indicator •Available shelf top or
rack mount versions •Two minute shutoff delay
Specifications: •Air volume: 150CFM •Dimensions
(shelf): 13⁄4" (H) x 17" (W) x 101⁄4" (D) •Dimensions (rack):
13⁄4" (H) x 19" (W) x 101⁄4" (D)
Order #
50-8840
50-8841
NEW!
Enclosure
Shelf top
Rack mount
ONLY
$299.00
349.00
Ultra Compact
40 Watt Stereo Amplifier
TM
SLA 150 Stereo Power Amplifier
This amplifier was designed specifically for use in
distributed audio installations, where high reliability
and premium sound quality are a must. Remote on/off
triggering and signal sensing allows this amplifier to
be set up in equipment racks, with no further contact
required. Rear mounted master level controls keep
installation safe from future tampering. Two autoswitching inputs allow automatic operation when used
with more than one system. Features: •Front panel
controls for level, balance and A/B speaker selection •Two
sets of L/R inputs, each may be switched to accept line
level speaker level signal •Auto-switching between inputs,
with adjustable delay •Manual or auto-sensing power
control •12V trigger input •12V trigger output •Power
output: 75W RMS x 2CH @4ohm, 150W RMS bridged
Order #
50-4610
Compact 18 Watt
Stereo Amplifier
MSRP
$449.00
Weighing in at less than 6 oz., this miniature stereo
amplifier is smaller than a deck of cards, yet delivers an
incredible 20W RMS per channel. It is perfect for driving
a pair of speakers directly from a portable MP3 player or
PC, flat panel TV or any other line or headphone level
source. 92% efficient digital amplifier circuit is housed in
a rugged extruded aluminum enclosure and is convection
cooled, ensuring whisper quiet operation. Features:
•3.5mm input •Included 3.5mm male/male cable
•Detachable Phoenix style speaker connections •LED
power indicator •Includes AC adapter Specifications:
•Output: 20W x 2CH @ 8ohm •THD 0.11% at 50% rated
power •S/N ratio: >99dB •Requires 24VDC, 2A
•Dimensions: 1.0" (H) x 2.2" (W) x 2.78" (D).
Order #
50-4600
ONLY
$79.99
ONLY
$199.00
Automatic A/B
Speaker Level Switch
Very small stereo
amplifier is perfect
for driving a pair of
speakers directly from
a portable MP3 player or PC,
flat panel TV or any other line or
headphone level source. 90% efficient digital amplifier
circuit is housed in a rugged extruded aluminum
enclosure and is convection cooled, ensuring whisper
quiet operation. Features: •Rotary level control
•Selectable high pass, low pass and full range operation
•L/R RCA line level input •LED power indicator •Screw
terminal power and speaker connections Specifications:
•Output: 9W RMS x 2CH at 4ohm •Full 20Hz~20KHz
frequency response •Requires 12VDC, 3A, AC adapter
not included (#28-10703) •Dimensions: 1.6" (H) x
3.15" (W) x 4.5" (D)
This switching device
automatically selects between
two line level sources to a
single input. L/R RCA female
input/output connections accommodate left and right
channels, making it perfect for all consumer electronic
devices. Default input-A is selected when no signal is
present. When a signal is sensed at input-B, the selector
automatically switches to that input. A separate 12VDC,
100mA signal is also provided to trigger other external
devices. Trigger sensitivity is fully adjustable from
10~100mV. Off delay (from B back to A after absence of
signal) is adjustable in eight steps from 0.5 seconds to 10
minutes. This unit requires 12VDC. Optional AC adapter
available (#50-8362).
This switching device
automatically selects between
two stereo amplifiers to a single
pair of speakers. It is perfect
in situations where installed
speakers are used with both
a local stereo or home theater
system, and a distributed audio system. Default input-A
is selected when no signal is present. When a signal is
sensed at input-B, the selector automatically switches
to that input. A separate 12VDC, 100mA signal is also
provided to trigger other external devices. Trigger
sensitivity is fully adjustable from 30~300mV. Off delay
(from B back to A after absence of signal) is adjustable in
eight steps from 0.5 seconds to 10 minutes. Relay contacts
are 4PDT, with isolated L/R ground paths. Music power
capacity is 100W. This unit requires 12VDC. Optional AC
adapter available (#50-8362).
Order #
50-4602
Order #
50-8385
Order #
50-8390
page
48
ONLY
$49.99
Automatic A/B Line
Level Switch
(1-3)
$59.99
1-800-543-4330
Fax: 1-800-765-6960
(4-11)
$54.95
(1-3)
$90.49
NET 30
Terms
Customer Service: 1-877-626-3532
(4-11)
$85.50
(12-up)
$76.50
Home Audio/Theater
NEW!
Universal Wireless Speaker Conversion System
Section
3
4Perfect for rear channel speaker installation
4Compatible with virtually any speaker
4Uncompress CD quality audio
Order #
50-6930
50-6935
50-6940
Model #
ARW51
ARW20
ARWR2
Description
Complete 5.1 system
AudioLink transmitter, (2) amplified receivers
Individual 60W RMS amplified receiver
ONLY
$599.99
249.99
99.99
Two-Way
Speaker
Switch Box
(1-5)
$18.99
(6-9)
$17.95
Table-top control center provides external volume
adjustment for a single pair of speakers. 12 position rotary
control utilizes multi tapped transformers for efficient
power transfer, with no heat build-up. Rear speaker in/out
connections are heavy duty push terminal strips and accept
up to 14AWG wire. Heavy metal case has non-skid rubber
feet and stays securely in place. Dimensions: 13⁄4" (H) x
7" (W) x 35⁄8" (D). Silver color.
(10-up)
$14.29
(4-11)
$87.60
Order #
50-6216
(6-9)
$18.03
(5-9)
$32.95
(10-up)
$29.95
These control boxes can operate multiple speaker pairs of
4, 8 and 16ohm impedance in any combination and can be
used with either one or two stereo amplifiers. This makes
it convenient to listen to different program material in
different rooms. 216W Optimatch™ attenuators are
employed so that worst case operating conditions will
appear as a 4ohm load to the amp. Made in USA.
Order #
50-2390
50-2395
(12-up)
$78.80
(10-up)
$14.68
Follow us on:
Product Questions Email: [email protected]
Speaker Pairs
Six
Four
Eight Position Input Selector
NEW!
Compact table top selector provides cost effective
selection of up to eight stereo sources into the line level
input of an amplifier. Ideal when multiple sources are
present, such as television, computer, portable media
players, CD or DVD players, and similar devices, and all
need to be switched into a single sound system Features:
•Rugged metal enclosure •Non skid rubber feet •Color
coded R/L RCA female input connections •Individual
pushbuttons for each input •Dimensions: 21⁄2" (H) x
12" (W) x 41⁄4" (W)
Order #
50-6202
4Volume adjustment in each zone
4A/B source selection 4216W RMS capacity
Intended for PA or other monaural applications, this switch box
provides individual on/off control of up to ten speaker systems.
Power capacity is 100W RMS, internal progressive resistor network
keeps amplifier load to a minimum of 2ohm, when ten 8ohm
systems are selected. Rear speaker in/out connections are color
coded push connectors. Metal case has non-skid rubber feet and
stays securely in place. Dimensions: 8" (W) x 21⁄4" (H) x 41⁄4" (D).
Black color. Note: Because low resistance loads can be damaging to
some amplifiers, the customer must ensure that the total speaker
load will be within the limits of the equipment in use.
(1-5)
$18.99
(1-4)
$34.99
Speaker Selector Volume Control
Ten Position Speaker Switch
Order #
50-6205
ONLY
$34.99
✔Single speaker pair control
✔Headphone jack
✔100W RMS capacity
Intended for use when in-wall type controls are not
practical, this control is ideal for use with free standing
remote speaker systems. Features: •Removable terminal
strip for greatly eased installations •12 step attenuation
•Suction cup feet to hold the unit secure during use
Specifications: •Power capacity: 60W RMS •Frequency
response: 20Hz~20KHz •Dimensions: Overall depth:
2.19" (H) x 8.5" (W) x 6.5" (D) •Call for larger
quantity pricing
(1-3)
$92.99
Compact table top selector provides cost effective
selection of up to eight pairs of speakers, from one
location. It provides a perfect solution to the need for low
cost distributed audio in residential audio or commercial
sound applications. Internal switching uses a combination
of series and parallel wiring, ensuring that the connected
amplifier sees a minimum of a 4ohm load (when 8ohm
speakers are used). This means that any conventional
amplifier or stereo receiver can drive multiple sets of
speakers, without the need for external impedance
matching devices. Features: •Rugged metal enclosure
•Non skid rubber feet •Color coded push terminals for
all speaker connections •Heavy-duty rocker switches
•Attractive sloped top panel •Power capacity: 50W RMS
per channel •Frequency response: 10Hz~50KHz
•Dimensions: 21⁄2" (H) x 12" (W) x 41⁄4" (W)
Table-Top Speaker Volume Control
Free Standing Stereo Volume Control
Order #
50-8275
NEW!
Order #
50-6225
Tabletop
control box
allows
selection of
A/B speaker
pairs. Internal 220ohm resistors ensure that amplifier
always sees a load, even with both switches off. With
both speaker switches in “on” position, speaker pairs are
connected in series, allowing use of 4ohm or 8ohm speaker
systems, without damage to amplifier. 200W maximum
power capacity. All connections are push type. Metal case
has non-skid rubber feet and stays securely in place.
Dimensions: 6.9" (W) x 2.2" (H) x 3.9" (D). Sloped front,
black color.
Order #
50-6185
Eight Position Speaker Selector
ONLY
$399.00
199.00
ONLY
$29.99
Single
Channel
Amplifier Module
Compact amplifier
is perfect for any
general purpose
application where a
speaker needs to be driven from a line level signal. Its
compact size allows it to be mounted most any place,
and may be directly attached to the rear of a speaker
enclosure. It is ideal for a wide variety of hobby,
service and prototype applications. Features: •RCA
female input •Accepts line level or headphone level signal
•12" attached speaker leads •Barrel type power connector
Specifications: •Input: Line level (80mV) •Output:
12W @ 4ohm •Requires 6~16VDC, 800mA
•Dimensions: 15⁄8" (H) x 27⁄8" (W) x 2" (D)
Order #
50-4605
MCMelectronics.com
Email: [email protected]
MSRP
$29.95
(1-4)
$14.99
(5-9)
$13.75
(10-up)
$12.75
page
49
3
Highly flexible modular wireless adapter system allows
untethered placement of speakers anywhere in a home theater room,
or throughout the house. They may even be used on temporary bases with
outdoor speakers. Complete ARW51 system consists of the AudioLink transmitter,
capable of sending 5.1 independent channels of audio to six separate receivers.
Five receivers have on board 60W RMS amplifiers, allowing them to
directly power any speaker system. The sixth has a subwoofer line
out, for driving any powered sub. ARW20 system includes the
AudioLink transmitter, and only two amplified receivers, perfect
for those rear channel speakers that often create wire routing issues.
Individual amplified receivers, and line level subwoofer receiver
are available separately, allowing total wireless speaker flexibility.
Because multiple receivers may be driven from a single transmitter
channel, these are a perfect solution for distributing sound throughout the residence. The system utilizes
channel hopping 2.4GHz technology, ensuring interference free performance. Uncompressed CD quality audio
transmits true, full frequency response audio, without loss of dynamic range. Transmitter and each receiver operate
from their own AC adapter. Amplified receivers have five-way binding post speaker outputs, subwoofer receiver
as female RCA line level out.
Section
3
Home Audio/Theater
3
a-live™ Multi-Zone Network Audio System
Simply plug the a–live™ into your existing computer network, and play digital music directly from your PC to any and
all zones. Streamed audio files can be played from the same playlist simultaneously among different zones. For example,
if a user in zone one selects a song to start playing, a different user in an other zone can select the same song to play, from
the beginning, without interfering with the current play in zone one. Or choose to play a completely different song. Each
of the six zones may independently select the same, or different songs, all from the same playlist. Most major unprotected
formats are supported.
An intuitive GUI interface allows you to remotely program and control any zone from a PC. This works perfect with
laptops on wireless enabled networks. For large–scale environments, dozens of a-live™ units can be networked together
and all controlled via the same GUI.
Optional a-live™ keypads (shown) provide total zone control, including volume w/mute, tone, and full control of all
PC-based music including forward, back, pause and scrolling information of artist and song name. Keypads also have
IR remote control capability for external source devices such as DVD and CD players and home theater receivers.
The control unit features six amplified zones, each may independently select from up to six different sources, plus the
network input. The 8ohm residential model features six stereo channels, each with 20W RMS power output per channel.
The 70V model is designed for commercial distributed systems, where multiple speakers will be powered from each zone.
This unit features six mono channels, each with 20W RMS power output, capable of driving 25V or 70V distributed
speaker systems.
Order #
555-10200
555-10210
555-10220
Model #
A6X6A70
A6X6A8
AKPA
Description
70V, six mono zones
8ohm, six stereo zones
Optional interactive LCD keypad
ONLY
$1125.00
895.00
98.49
Back
Distributed Audio
Stereo Receiver
This receiver is perfect for music listening in any room of
the home, with conventional left/right stereo output. What
sets this apart is four amplifier output channels, creating
a self contained, four-zone distributed audio receiver. Up
to four pairs of bookshelf, in-wall, in-ceiling or outdoor
speakers may be driven directly from this unit, with
independent selection of any or all pairs. It is perfect
in small residential or commercial background music
applications. Features: •AM/FM tuner with 30 station
presets •Five audio inputs (including tuner) •Phono input
•IR remote control •Volume, bass and treble controls
•Headphone jack •Power output: 70W RMS x 4 (8ohm),
100W RMS x 4 (4ohm) •THD: <0.2%, 20Hz~20KHz
into 8ohm •Dimensions: 5" (H) x 173⁄8" (W) x 13" (D)
•Mfr. #RX-5502
Order #
50-4640
Elevate™ Music
System Learning
Remote Control
Elevate™ 6.6 Whole Home Music System
This complete six zone, six source sound system brings multizone, multi-source audio to a new price level. Purchase the
BA-6640MS as the main unit, to drive up to six zones. Add the
BA-6640XS Expander to the main unit, to control up to a total of
12 zones. Features: •Six independent stereo amplifier channels,
one for each zone •Individual keypad control for each zone
•Independent selection from up to six input sources from each
zone •Complete control of input source, volume level and system
power on/off from each keypad •Infrared repeating from each
keypad to control source devices as well as the Elevate™ unit.
Complete six zone kit includes: •Elevate 6.6 base unit
•Allport™ connection cable •IR emitters •IR remote control
•Six remote keypads Specifications: •Power output: 20W RMS
x 12 CH •THD: 0.4% •Frequency response: 30Hz~20KHz
•Power requirements: 110/220VAC, 50/60Hz, 166W
•Dimensions: 3.5" (H) x 17" (W) x 12.75" (D)
Order #
50-4645
50-4647
Model #
BA-6640MS BA-6640XS
Description
Complete Six Zone Kit
Six Zone Expander
ONLY
$977.47
977.47
ONLY
$159.00
Elevate™ Whole
Home Music System
This complete four zone sound system brings multi–zone, multi–
source audio to a new price level. Features: •Four independent
stereo amplifier channels, one for each zone •Individual keypad
control for each zone •Independent selection from two input
sources from each zone •Complete control of input source,
volume level and system power on/off from each keypad •Infrared
repeating from each keypad to control source devices as well as
the Elevate™ unit Elevate™ amplifier includes: •Elevate base
unit •Allport™ connection cable •Two IR emitters •IR remote
control •Complete four-room kit also includes four remote
keypads Specifications: •Power output: 15W RMS x 8 CH
•THD: 0.4% •Frequency response: 30Hz~20KHz •Power
requirements: 110/220VAC, 50/60Hz, 166W •Dimensions:
3.5" (H) x 8.5" (W) x 12.75" (D)
Order #
50-4650
Model #
BA-2430S Description
Complete four room kit
Learning IR remote
control operates all
functions of the Elevate™
Music System, and may
be programmed to operate
source devices. This
allows operation of tuners,
satellite receivers, CD or
DVD players from any
Elevate™ zone, simply by
pointing the remote at the
wall mounted keypads.
Order # Model # ONLY
50-4651 BA-LRC1 $34.99
ONLY
$489.00
Resonate™ 61⁄2" Single Stereo Ceiling Speaker
Resonate™ 61⁄2"
Ceiling Speaker Pair
Designed for use with the Elevate™ Whole Home
Music System, this high performing ceiling speaker
is perfect for any residential or small commercial
distributed sound system. This speaker features a dual
voice coil woofer and dual tweeters, allowing it to act
as two speakers in one opening. It is perfect for providing
L/R audio to small lavatories, entryways and hallways.
Features: •Dual 13mm mylar dome tweeters •61⁄2" poly cone
woofer with rubber surround •Rotating plastic clips for easy mounting to existing drop
ceiling tile or drywall •Optional pre-construction bracket to ease new–construction
installations Specifications: •Power capacity: 50W RMS (each channel) •Frequency
response: 50Hz~20KHz •Impedance: 8ohm (each channel) •SPL: 91dB (W/M)
Dimensions: •Outer frame diameter: 9" •Required cutout: 8" diameter •Mounting
depth: 3" •Sold individually
Designed for use with the Elevate™ Whole Home
Music System, this high performing ceiling speaker
pair is perfect for any residential or small commercial
distributed sound system. The micro perforated grill
adds to the aesthetic beauty of these speakers, which
may be painted to match any décor. Features: •Pivotal
20mm silk dome tweeter •61⁄2" poly cone woofer with rubber
surround •Rotating plastic clips for easy mounting to existing drop ceiling tile or drywall
•Optional pre-construction bracket to ease new–construction installations Specifications:
•Power capacity: 50W RMS •Frequency response: 50Hz~20KHz •Impedance: 8ohm
•SPL: 91dB (W/M) Dimensions: •Outer frame diameter: 9" •Required cutout: 8" diameter
•Mounting depth: 3" •Sold in pairs
Order #
50-4667
50-4668
Order #
50-4665
50-4668
page
50
Model #
BA-650CS
BA-BK6C
Description
Ceiling speaker Pre-construction bracket pair
ONLY
$64.99
12.99
1-800-543-4330
Fax: 1-800-765-6960
Model #
BA-650C
BA-BK6C
Description
Speaker pair
Pre-construction bracket pair
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$99.99
12.99
Home Audio/Theater
NEW!
Multi–Zone
Speaker Selectors
IP Addressable
Speaker Selector
Order #
50-10450
ONLY
$399.00
Audiophile Grade In-Wall
Volume Controls
These stereo
volume controls
are designed for
use in distributed
audio systems,
primarily with
in-wall and ceiling
speakers. Resistor based
design provides much improved
frequency response when compared to
conventional transformer based units.
Specially selected non-inductive, high
capacity resistors ensure full frequency
response, with less than 0.5dB variance.
Decora style face plate is compatible with
standard decora single and multi gang
covers. Single gang cover is included. Unit
is shipped as white color, hardware and
knobs are included for conversion to bone
or almond. Features: •Available in 60W
and 120W RMS models •Special push-lock
connector for fast connection without a screwdriver •Fits
standard electrical boxes and low voltage brackets •12
step attenuation Specifications: •Frequency response:
20Hz~20KHz, < ±0.5dB •Overall depth: 21⁄2"
Order #
50-8230
50-8240
Power Capacity
60W RMS
120W RMS
(1-3)
$34.99
39.99
(4-11)
$33.19
36.95
(12-up)
$29.59
33.95
NEW!
Ideal for controlling multiple pairs of installed speaker
systems from a single location. Four and eight zone
models are available with simple pushbutton on/off
control for each zone. Four and six zone versions feature
on/off selectors as well as 12 step volume controls for
each zone. Features: •Rugged 17" wide metal housing
(S4DC is 83⁄8") •Front panel impedance protection
switch, with rear panel override •Suction feet to hold
unit firmly to shelf during use •Removable screw terminal
connections accept up to 14AWG wire •100 room labels
to customize to any application Specifications: •Power
capacity: 125W RMS per channel (all zones combined)
•Frequency response: 20Hz~20KHz ±0dB •Dimensions
(S4DC): 23⁄16" (H) x 83⁄8" (W) x 61⁄2" (D) •Dimensions
(others): 23⁄16" (H) x 17" (W) x 61⁄2" (D)
Order # Mfr. # Description
(1–3)
50-8400 S8DC Eight zone $250.00
50-8405 S4DC Four zone
150.00
50-8430 S6VC Six zone 425.00
with volume controls
50-8435 S4VC Four zone 350.00
with volume controls
(4–11)
$237.50
142.50
403.75
332.50
These stereo
in-wall volume
controls are
designed for use in
distributed audio systems,
primarily with in-wall and ceiling speakers.
Impedance matching design enables up to 8
pairs of 8ohm speakers to be connected to a
stereo amplifier, and appear as a 4ohm load.
Decora style face plate is compatible with
standard decora single and multi gang
covers. Single gang cover is included.
Unit is shipped as white color, hardware
and knobs are included for conversion to
bone or almond. Features: •Detachable
terminal strip, greatly easing installation
•Fits standard electrical boxes and low
voltage brackets •Ten step attenuation
Specifications: •Power capacity: 45W
RMS •Frequency response: 20Hz~20KHz
•Overall depth: 21⁄2"
(1-3)
$31.49
(4-11)
$29.13
Ends the problem of multiple
speaker home runs to a single
location. The CB connecting
block enables easy connection of four pairs of speakers,
to a single bus. This bus then is easily connected to the
amplifier output. The CBX expansion blocks can then be
added to the connecting block, providing connection for
four additional pairs. An endless number of CBX blocks
may be cascaded on a single CB block. Compact units
have screw holes for attaching inside the wall, to a stud.
Note: This is a straight parallel connection and no
impedance protection is provided. Impedance matching
volume controls must be used if the overall impedance
falls below the minimum level of the amplifier.
Order # Description
(1-3) (4-11) (12-up)
50-8305 CB connecting block $34.99 $31.95 $29.33
50-8306 CBX expansion block 31.99 28.95 26.78
Order #
50-8270
50-8271
Follow us on:
Product Questions Email: [email protected]
(1-3)
$74.99
74.99
(4-11)
$68.49
68.49
Order #
50-10405 ONLY
$199.00
Impedance Matching
Volume Control
(1-3)
$49.99
(4-11)
$47.50
(12-up)
$44.95
(12-up)
$26.04
Outdoor Volume Controls
Color
Gray
White
With an iPort system installed,
music can be enjoyed through
your speaker system while
your iPod is conveniently
charged. Features:
•Compatible with most
dockable iPod models
including iPod touch •Delivers
local-zone unbalanced audio
up to 30' away •Dimensions:
43⁄4" (W) x 65⁄16 " (H) x 3½" (D) •Cut-out dimensions:
•4" (W) x 59⁄16" (H) Includes: •iPort dock (faceplate
and utility box) •Wall plate and cable •Audio wall
plate •Regulated power supply •Mfr. #IW-20
Order #
50-8200
Specifically designed for outdoor
applications, these volumes
controls feature stainless steel
hardware and a PVC enclosure,
and are ideally suited for use
with landscaping “rock” speaker
systems. The housing attaches
to standard 3⁄4" PVC conduit for
simplified watertight installation.
Resistor based design provides improved frequency
response when compared to conventional transformer
based units. Specially selected non-inductive, high
capacity resistors ensure full frequency response, with
less than 0.5dB variance. Features: •Special push-lock
connector for fast connection without a screwdriver •Fits
standard electrical boxes and low voltage brackets •12
step attenuation Specifications: •Power capacity: 60W
•Frequency response: 20Hz~20KHz, < ±0.5dB •Overall
depth: 21⁄2" •Call for larger quantity pricing
Parallel Connecting Blocks
iPod® Wall Dock
These stereo
in-wall volume
controls are
designed for
use in
distributed
audio systems,
primarily with in-wall and
ceiling speakers. Impedance
matching design enables up to 18 pairs
of 8ohm speakers to be connected to a
stereo amplifier, and appear as a 4ohm
load. Decora style face plate is compatible
withstandard decora single and multi gang
covers. Single gang cover is included.
Unit is shipped as white color, hardware
and knobs are included for conversion to
bone or almond. Features: •LiftLock™
connector, enables fast connection without
a screwdriver •Fits standard electrical
boxes and low voltage brackets •12 step
attenuation Specifications: •Power capacity: 60W RMS
•Frequency response: 20Hz~20KHz •Overall depth: 21⁄2"
Impedance
Matching
Volume Control
Order #
50-8220
3
(12-up)
$61.75
61.75
In-Wall
Volume Control
These stereo
volume controls are
designed for use in
distributed audio systems,
primarily with in-wall and ceiling
speakers. Decora style face plate is
compatible with standard decora single
and multi gang covers. Single gang cover
is included. Unit is shipped as white
color, hardware and knobs are included
for conversion to bone or almond.
Features: •LiftLock™ connector, enables
fast connection without a screwdriver
•Fits standard electrical boxes and low
voltage brackets •12 step attenuation
Specifications: •Power capacity: 60W
RMS •Frequency response: 20Hz~20KHz
•Overall depth: 21⁄2"
Order #
50-8210
MCMelectronics.com
Email: [email protected]
(1-3)
$39.99
(4-11)
$37.75
(12-up)
$33.95
page
51
3
The AuidoFlexNet eight zone speaker selector allows
control of the audio system from any device that runs
a browser, including desktop and laptop PCs, PDAs,
portable gaming devices, or smart cellular telephones.
Each AudioFlexNet unit is treated as just another device on
the network for seamless integration. A configuration page
is included that allows the control panel to be customized
for any system and each zone can be named for the room
it controls for simple operation. The selector provides
feedback information to the browser, confirming status
for each zone. The eight zone speaker selector is a straight
parallel connection without impedance matching, making
it ideal for use with 70V distributed systems. For
conventional 8ohm systems, impedance matching
volume controls are recommended for each speaker
pair. Model #SW-2.
Section
Section
3
Home Audio/Theater
SmartPath Infrared Repeating System
SmartPath’s easy installation and configuration allow installers to quickly create
a pathway of complete A/V system control. All components are available separately for
versatile configuration of any custom system. Emitters and receivers may be connected
with two pairs of 24AWG solid or stranded unshielded twisted pair wire, including standard
Cat 5, for distances up to 1200'. Heavier gauge cable can be used for distances of up to 5000'.
A complete system requires the following four basic components: •At least one infrared
receiver •One connecting block •As many emitters as needed to control A/V components
•One DC power supply
Complete SmartPath
IR Repeater System
3
Take the guess work out of
setting up a typical one
room system with this
complete IR repeater kit,
everything is included in
one convenient package.
System includes: •One
IRC-3.0 shelf top receiver
•One AT-1.0 amplified
terminator unit •One PS-1.0
power supply •Four IRE1.0 IR emitters
Order #
50-8363
Mfr. #
IRC-3.0 KIT
(1-3)
$215.00
(4-11)
$204.00
Flush Mount Mini
IR Receivers
Shelf Top IR
Receivers
Compact receivers are
housed in an attractive
case to sit on the
surface of a cabinet or
shelf. Clearly visible
system status and IR activity LEDs provide positive
feedback to the user. Models include an 8' attached lead,
terminated with SpeakerCraft’s unique four-conductor
3.5mm plug. Provides a reception angle of 110°.
Dimensions: 11⁄8" (L) x 33⁄16" (W) x 11⁄16" (D)
Order #
50-8325
Compact receivers require only a 1⁄2" hole, and
may be mounted flush in cabinets or walls,
leaving only a circular bezel exposed to the room. They
may also be mounted behind the grill of most in-wall
speakers. Each includes a set of four color bezels (almond,
black, bone and white), to match any décor. Also included
are two specially designed ALR (ambient light restrictor)
bezels, for use near plasma displays. Clearly visible
system status and IR activity LEDs provide positive
feedback to the user. Models include an 8' attached lead,
and are available with bare wire connections or
SpeakerCraft’s unique four-conductor 3.5mm plug.
Receivers provide a reception angle of 110° standard, 60°
with ALR bezel installed. Dimensions: •Unit: 15⁄32"
diameter x 25⁄8" (L) •Cap bezel: 47⁄64" diameter x 1⁄8" (L)
•ALR bezel: 47⁄64" diameter x 23⁄64" (L)
Order # Mfr. # Connection (1-3) (4-11) (12-up)
50-8310 IRC-1.0 3.5mm plug$126.10 $120.00 $107.25
50-8311 IRC-1.1 Bare leads 127.00
-
-
Mfr. #
IRC-3.0
(1-3)
$75.49
Order # Mfr. #
Connection (1-3) (4-11) (12-up)
50-8320 IRC-2P2.0 3.5mm plug$115.00$105.00 $95.00
50-8321 IRC-2P2.1 Bare leads 115.00 105.00 95.00
(12-up)
$63.75
Wall Mount “Junction
Box” IR Receivers
Attractive receivers include clearly
visible system status and IR activity
LEDs, to provide positive feedback to
the user, and mount in standard single
gang junction boxes or low-voltage
brackets. Decora style design is
compatible with standard wall plates, single gang plate
is included. EZ-connector terminal block allows simple
connection of unterminated twisted pair wire. Dimensions:
4" (H) x 11⁄2" (W) x 1" (D)
Order # Mfr. #
50-8330 IRC-4.0
50-8332 IRC-4.0
Color
(1-3)
(4-11) (12-up)
White $120.00 $115.00 $102.50
Almond 120.00 115.00 102.50
Ultra Compact Plasma
Block Mini IR Receivers
These units are designed to block plasma,
CFL, EMI, and ESI noise sources, using
SpeakerCraft’s exclusive “smart” circuit
(patent pending). The actual sensor and
electronics are separated into separate “main” and “pickup” modules, enabling installation into very tiny spaces
of furniture recesses, monitor panels and under shelves.
The main module houses the status and activity LEDs.
Detachable lead between main and pick-up module totals
6' in length. The main module has attached 5' lead,
terminated with bare wire connections or SpeakerCraft’s
unique four-conductor 3.5mm plug. Overall reception
angle is 100°. Dimensions: •Pick-up module: 7⁄8" (L) x 13⁄32"
(W) x 9⁄32" (D) •Main module: 29⁄16" (L) x 9⁄16" (W) x 1⁄2" (D)
(4-11)
$71.25
Surface Mount
Mini IR Receivers
Compact receivers are
intended for surface
mounting on cabinets,
TV sets or the wall, with attached double sided adhesive.
Clearly visible system status and IR activity LEDs provide
positive feedback to the user. Models are available in
black or white, with 8' attached lead, terminated with bare
wire connections or SpeakerCraft’s unique four-conductor
3.5mm plug. Black version, with stripped leads is also
available with the ALR (ambient light restrictor) lens
for use near plasma displays. Standard receivers provide
a reception angle of 110°, the ALR version is 60°.
Dimensions: 29⁄16" (L) x 17⁄32" (W) x 9⁄16" (L)
Order # Mfr. # ColorConnection (1-3) (4-11) (12-up)
50-8316IRC-2.0Black 3.5mm plug$121.00$115.25$103.15
50-8317IRC-2.1WhiteBare leads 121.00 115.25 103.15
50-8318IRC-2.1Black Bare leads 127.60 121.35 108.95
50-8319IRC-2.1 Black Bare leads 127.65 121.35 108.75
ALR
Amplified
Terminator Unit
The AT-1.0 amplified
terminator unit functions
as central control unit for
large multi room IR systems,
allowing connection of the
power supply, IR emitters
and receivers. EZ-connect terminal block allows
connection of multiple daisy chained receivers.
Four-conductor 3.5mm jack accepts connection of one
similarly equipped receiver. This unit has a total of four
outputs that will drive four emitters, or two emitters
and two blasters. The EMX-1.0 expansion terminator
(#50-8350) allows connection of additional emitters.
5~24VDC status input accepts status signal from IR
controlled equipment, and provides visual indication
at each IR receiver.
Order #
50-8335
Mfr. #
AT-1.0
(1-3)
$79.99
(4-11)
$75.95
(12-up)
$67.95
Passive Terminator
The PT-1.0 passive terminator
functions as central control unit
for compact, single room IR
systems, allowing connection of the power supply, up to
two IR emitters and a single IR receiver, equipped with
a four-conductor 3.5mm plug. 5~24VDC status input
accepts status signal from IR controlled equipment,
and provides visual indication at the IR receiver.
Order #
50-8340
Mfr. #
PT-1.0
(1-3)
$11.49
(4-11)
$10.65
(12-up)
$9.65
Emitter Expansion
Terminator
The EMX-1.0 expansion
terminator expands the
number of outputs of
the AT-1.0 amplified
terminator unit. This
passive device simply plugs into the emitter output of
the AT-1.0, and provides up to ten emitter outputs. A
feed through output is also provided, allowing multiple
EMX-1.0s to be cascaded. Includes 12" cable for
connection to the AT-1.0.
Order #
50-8350
Mfr. #
EMX-1.0
(1-3)
$21.99
(4-11)
$19.99
Break Out Terminator
The BOT-1.0 breakout terminator
provides bare wire connection to
SmartPath IR receivers that are
equipped with SpeakerCraft’s
standard four-conductor
3.5mm plug. This allows plug terminated receivers to
be connected to the EZ-connect terminal blocks, as
well as other brand three and four wire systems.
Prevents IR signals
from interfering with
other components. Fits over
SmartPath IR emitters or components IR sensor window.
Units measure 1" x 2" and may be trimmed to fit.
IR lens is designed to attach to equipment
or remote mounted IR receivers to improve
reliability of IR reception. Multi-array
mirror system provides 90° reflection angle, insuring
equipment will “see” the IR emitter. Sold in packages
of ten.
Order #
50-8345
Order #
50-8371
Order # Mfr. # (1-3 pkgs.) (4-11 pkgs.) (12 pkgs.-up)
50-8370 ILC-1.0 $18.49
$17.10
$15.30
page
52
Mfr. #
BOT-1.0
(1-3)
$9.29
(4-11)
$8.82
Octagonal Light Collector Lens
Emitter Cover
Mfr. #
IR SHIELD
(1-3)
$2.00
1-800-543-4330
Fax: 1-800-765-6960
(4-11)
$1.90
(12-up)
$1.70
NET 30
Terms
Customer Service: 1-877-626-3532
Home Audio/Theater
Standard IR Emitters
Order # Mfr. #
50-8356 IRE-1.0
50-8357 IRE-2.0
50-8358 IRE-3.0
50-8359 IRE-4.0
Description
Single emitter
Dual emitter
Single emitter w/visible LED
Dual emitter w/visible LED
(1-3)
$11.99
21.99
11.99
(4-11)
$10.89
19.95
10.89
(12-up)
$10.09
17.95
10.09
19.99 18.95 16.95
Keystone Mount
3.5mm Connector
This keystone insert
features a standard
3.5mm threeconductor female jack
which may be used in
two or three conductor
applications. It is ideal any time a 3.5mm connector is
needed at a wall plate. Rear mounted IDC connector
allows simple, fast connection to unterminated Cat 5
cable, or any 22~24AWG solid or stranded, UTP or
shielded wire. Maximum voltage: 24VAC/DC, 1A.
Applications: •Remote location of headphone jacks
•Remote microphone connections •Remote input from PC
sound card, MP3 player or iPod™ •IR repeater connection
•Remote triggering of A/V components •Low voltage DC
connection •Sold individually
Order #
50-7753
MSRP
$12.95
(1-3)
$6.99
(4-up)
$5.95
Micro Mini IR Emitter
Extremely compact IR
sensor is only slightly
larger diameter than its
connection cable, and can
be placed inside the actual component, near the IR sensor.
This emitter will “blast” the entire chassis, ensuring the
equipment IR sensor will receive the signal. It is a great
alternative to “untidy” front panel emitters. Includes 8'
lead terminated with two-conductor 3.5mm plug.
Order #
50-8355
Mfr. #
IRE-0.5
(1-3)
$23.49
(4-11)
$21.95
(12-up)
$19.79
High Power IR Blaster
Designed for installation
into equipment rack, this
unit is intended to provide
sufficient output to control
all components. The unique
3" wand features two
high output IR emitters
“flooding” the rack with the
remote signal. The wand can be adjusted above or below
a rack of components to suit specific situation. Attached
8' lead is terminated with a two-conductor 3.5mm plug.
Order #
50-8360
Mfr. #
IRE-5.0
(1-3)
$29.99
(4-11)
$28.03
(12-up)
$25.08
SmartPath
Connecting Cables
Use to adapt
components for use with
other equipment, or to
extend existing leads.
Sets include: •PTP-1.0:
Set of six, 12"
2-conductor cables, male
to male 3.5mm plugs •PTP-8: Set of six, 8'
2-conductor cables, male to male 3.5mm plugs
•PTJ-40: 40' 2-conductor cable, male to female
3.5mm plugs •QIX-1.0: 15' 4-conductor cable, male
to female 3.5mm plugs •SAC-1.0: Diode protected “Y”
cable, single female to two male 3.5mm plugs, allows
connection of one emitter to two sources •PTS-3: Set of
six, 36" 2-conductor cables, male 3.5mm plug to stripped
leads •STS-4: Set of six, 48" 2-conductor cables, barrel
type power plug to stripped leads.
Order #
50-8372
50-8373
50-8375
50-8377
Mfr. #
(1-3 sets)
PTP-1.0 $20.00
PTP-8
32.99
QIX-1.0
8.50
PTS-3
12.49
(4-11 sets) (12 sets -up)
$19.00
$17.00
30.45
27.20
8.08
7.23
11.40
10.20
Follow us on:
Product Questions Email: [email protected]
This keystone insert
features a standard
barrel jack which
accepts connection
from most AC
adapters. It is essential when low voltage must be inserted
into a Cat 5 pair for remote distribution. It is ideal for
remote powering of small LCD monitors, video cameras,
IR repeater systems and similar items. Rear mounted IDC
connector allows simple, fast connection to unterminated
22~24AWG solid or stranded wire. Maximum voltage:
24VAC/DC, 1A. Barrel size: 2.1mm I.D., 5.5mm O.D.
•Sold individually
Order #
50-7752
MSRP
$11.95
(1-3)
$6.99
(4-up)
$5.95
SmartPath IR System
Power Supplies
Supplies plug directly into
SpeakerCraft terminator
models AT-1.0 or PT-1.0 to
provide power to the entire IR
repeater system. Both high
quality units are regulated at
12VDC, at the current rating
shown below. The correct
power supply, with sufficient
current output, must be
selected for the system in
place. To calculate current
requirements, simply add the
current draw of each device to
determine the total current needed. Current draw of
SpeakerCraft devices are as follows: •IR emitters: 15mA
•IR receivers: 6mA •IR blasters: 150mA •Terminator units
AT-1.0 and PT-1.0 add no additional current draw
Order #
50-8361
50-8362
Mfr. #
PS-2.0
PS-1.0
Top
Input Source
Switch Boxes
Tabletop control box
Back
allows selection of multiple input sources. Ideal
when connecting several audio devices, such as
CD players, VCRs, laser disk players and satellite
receivers to home stereo equipment. Models available to
select from three, four or five sources. Internal PC board
design provides quiet, reliable operation. All connections
are all RCA type female. Metal case has non-skid rubber
feet and stays securely fixed in place. Dimensions:
6.9" (W) x 2.2" (H) x 3.9" (D).
Order #
50-6170
50-6175
50-6180
Keystone Mount
DC Power
Connection
Current
1200mA
200mA
(1-3)
$55.49
13.49
(4-11)
$52.25
12.35
3
3
Compact sensors attach via
included double sided adhesive,
and may be mounted near
equipment to be controlled.
Multiple configurations are
available to suit a variety of
applications. Dual emitter units
allow placement in front of two pieces of equipment,
from only one plug connection. Units with visible LEDs
provide visible feedback of presence of IR signal. Each
includes an attached 8' lead, terminated with a twoconductor 3.5mm plug.
Section
Positions
Three
Four
Five
(1-5)
$14.49
15.49
16.99
(6-9)
$13.03
14.45
15.27
(10-up)
$10.98
11.92
12.10
Three-Way Audio/Video Switch Box
Tabletop control box allows selection of multiple A/V
sources. Ideal when connecting several devices, such as
CCTV cameras, camcorders, VCRs, laser disk players
and satellite receivers to a single video monitor or
VCR. Accommodates video and left and right audio,
all connections are all RCA type female. Metal case
has non-skid rubber feet and stays securely in place.
Dimensions: 6.9" (W) x 2.2" (H) x 3.9" (D). Sloped
front, black color.
Order #
50-6195
(1-5)
$19.99
(6-9)
$18.95
(10-up)
$15.09
A/B Input Source Switch Box
Compact control box allows selection
of two input sources into a single
auxiliary or tape input. Single push
button switch selects source “A” or
“B”. Ideal when connecting audio
devices such as CD players, VCRs,
laser disk players and satellite
receivers to home stereo equipment.
Output connection is made via
attached 5' lead, terminated with male
RCA type connectors, color coded red
and white. Input connections are RCA
type female. Rugged metal enclosure
is black in color, dimensions: 3" (W) x
1" (H) x 3" (D) including switch
and connections.
Order #
50-6220
(1-5)
$8.99
(6-9)
$8.19
(10-up)
$7.49
In–Wall A/B Speaker Switch
Simple pushbutton A/B operation allows selection of two speaker pairs from a single amplifier,
or a single pair of speakers to select between two separate sources. Ideal when a pair of in–wall or
ceiling speakers is needed for a local stereo or home theater system, and whole house audio. Mounts
in standard single gang electrical boxes or low voltage brackets, units include decora cover plate
and all hardware.
Order #
50-8440
50-8441
50-8442
Description
White Bone
Almond
(1–3 kits)
$34.99
34.99
34.99
MCMelectronics.com
Email: [email protected]
(4–11 kits)
$33.20
33.20
33.20
page
53
Section
3
3
Home Audio/Theater
Front
Phono
Preamplifier
Back
Phono Preamplifier/
USB Interface
This high quality USB audio interface with standalone
RIAA phono preamp acts as an interface between your
computer and a wide variety of analog and digital sources.
Analog inputs are switchable between phono and line level
signals and a low cut filter removes rumble and wind noise
while leaving the audio pristine. The front panel USB
monitor/headphone 1⁄8" jack and the optical output on the
rear panel can monitor audio output from your computer.
Line output jacks are always connected to the input
preamps signal for source monitoring. The unit may be
powered by an external power source or from USB port.
Optical TOSLINK in/outs and S/PDIF input let you use
this as a digital audio to USB interface as well. Fully
compliant with the USB 1.1 specification and uses USB
adaptive mode for playback and USB asynchronous mode
for record. It will work with the USB audio device drivers
built into Windows 98SE/ME/2000/XP or Macs with
native USB support OS9.1 or greater or OSX. No special
drivers required. Specifications: •Frequency response:
10Hz~50KHz •THD: .01% dB •A/D & D/A: 16 bit,
44.1KHz or 48KHz USB selectable •Power requirements:
7~12VDC or 9~12VAC, 150mA, or USB bus
•Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order #
555-2717
ONLY
$99.49
DJPRE-II Phono
Preamplifier
High-quality preamplifier
is built to the exacting
standards that made AudioTechnica one of the largest
magnetic phono cartridge manufacturers in the world.
It is perfect when turntables need to be played through
conventional line level amplifier inputs. Use to connect a
turntable to newer home theater equipment, to a computer
sound card, mixing console, or other professional
equipment. In addition to providing the required gain, it
adds necessary RIAA equalization to compensate for the
industry standard EQ curve utilized on LPs. Unit features
L/R RCA female type inputs and outputs, plus a separate
ground lug. Specifications: •Frequency response:
20Hz~20KHz •S/N ratio: 80dB •Input sensitivity: 2.5mV
•Phono input impedance: 47Kohm •Power requirements:
15VDC, 20mA, AC adapter included •Dimensions:
1.18" (H) x 2.76" (W) x 3.62" (D)
Order #
50-7778
(1-3)
$99.99
(4-up)
$89.95
Phono Preamplifier
Allows a turntable to be played
through conventional line level
inputs such as aux, tape, tuner or
CD. It is also useful for operating
a turntable with a computer sound
card, mixing console, or other professional equipment.
Features: •L/R RCA female type inputs and outputs
•Separate ground lug Specifications: •Frequency
response: 30Hz~20KHz •Input level: 6mV •Output level:
500mV •SN ratio: >60dB •Requires 117VAC, 60Hz
•Dimensions: 11⁄2" (H) x 25⁄8" (W) x 47⁄8" (D)
Order #
40-630
MSRP
$24.95
(1-9)
$19.99
Input Source Mixer/
Headphone Amplifier
Versatile table-top device
features two stereo line level
inputs and a single line level
output, allowing the user
to mix two sources into one.
Slide controls allow independent gain
adjustment for each source. Front panel
3.5mm stereo headphone jack, with slide level control,
is provided for monitoring of the mixed source. Compact
unit is perfect for any application requiring a low cost line
mixer, or headphone amplifier. Metal case has non-skid
rubber feet and stays securely in place. All connections,
except headphone, are RCA type female. Requires
12VDC, 100mA. AC adapter included. Dimensions:
13⁄4" (H) x 5" (W) x 41⁄2" (D). Black color.
Order #
555-2716
Order #
50-6182
(1-4)
$26.99
This compact unit will accept standard coax or Toslink
SPDIF signal, and convert it to line level audio. It is
perfect when there is a need to send digital audio signal
to an amplifier not having digital inputs, including home
audio receivers, prosound amplifiers and mixing consoles.
It is perfect when an unused digital output on a piece of
home theater equipment needs to be sent to a separate
whole house audio amplifier. Features: •Two Toslink
inputs •Two coax inputs •Four-position input selector with
LED indication •1⁄4" headphone output with adjustable level
•Separate REC and AMP line level L/R RCA outputs (both
fixed level) •LED power indicator Specifications: •Digital
input: 96KHz (standard SPDIF) •Resolution capability:
24 bit •Amplitude linearity: 1.06dB •Frequency response:
20Hz~20KHz •Channel separation: 100dB @ 1KHz
•S/N ratio: 103dB •THD: <0.0015% •Digital filter:
82dB •Headphone output: 700mW, 8~32ohm
•Power requirements: 12VDC, AC adapter included
•Dimensions: 11⁄2" (H) x 93⁄4" (W) x 41⁄2" (D)
Order #
50-7774
MSRP
$179.00
(1-3)
$105.00
(4-up)
$89.95
(10-up)
$17.95
Since newer
receivers typically do
not include magnetic
phono connection, this pre–
amplifier is required to connect
a turntable to a conventional line
level input. It is also necessary if playing LPs through
a computer sound card, mixing console, or other
professional equipment. In addition to providing the
required gain, this unit also adds necessary RIAA
equalization to compensate for the industry standard EQ
curve utilized on LPs. Features: •L/R RCA inputs and
outputs •Adjustable ±10dB gain •Selectable 100pF/200pF
input capacitance •Switchable 3dB low cut at 22Hz
•Signal clip indicator •Turntable ground lug •Power
requirements: 7~12VDC or 9~12VAC •AC adapter
included •Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
ONLY
$49.49
24 Bit/96K D/A Convertor
(5-9)
$24.95
Input Interface Cable for iPod™
5' cable allows connection of your iPod™ to any
amplifier with standard line level inputs. It is perfect for
use with home theater and distributed audio systems, as
well as autosound systems having RCA line level inputs.
Proprietary connector inserts directly into the bottom of
the iPod™ and provides fixed line level output through
L/R RCA male connectors. Cable assembly also provides
regulated power supply to the iPod™ allowing it to be
charged or powered from external 12VDC source.
Order #
50-9185
ONLY
$17.99
(10-up)
$21.95
Dual Channel Ground
Loop Isolator
Phono Input Attenuator
Device allows standard line
level items to be played
through magnetic phono
inputs, commonly found on
older home audio receivers
and mixing consoles. CD/
DVD/ MP3 players, tape
decks, VCRs, computer
sound cards and tuners may now be connected to
unused phono inputs. In addition to providing the
required signal attenuation, this unit provides passive
equalization to compensate for the RIAA curve that is
present on magnetic phono inputs. Inputs are RCA female,
outputs are male RCA connections on a 7" pigtail. Passive
device requires no power. Dimensions: 1" (H) x 2.25" (W)
x 3" (D)
Ground loop problems in A/V
systems normally appear as a
hum in speakers or horizontal
bars on video monitors. These
problems typically occur when
multiple components receive AC power
from different locations, or because CATV, satellite or
antenna systems provide a separate ground point. This
isolator solves that problem by providing ground path
isolation between components, while maintaining full
frequency response. Features: •Rugged steel enclosure
•RCA input and output connections •Fully independent
L/R channels Specifications: •Frequency response:
10Hz~50KHz •THD: 0.01% •Dimensions: 1.50" (H) x
3.50" (W) x 2.50" (D) •Passive device, requires no power
Maintains a constant average output loudness, regardless
of the audio source type or loudness. Perfect for louder
than program commercials on radio and TV, and volume
variations between different broadcasting stations, records
and CDs (perfect for multi-disc players). Connect to the
tape loop of any amplifier or receiver, or between the preamp and power amplifier, or between audio outputs of TV
or VCR and amplifier inputs. Because this device monitors
average input level, normal program dynamics experienced
in high action video scenes are maintained. Dimensions:
21⁄8" (H) x 71⁄8" (W) x 33⁄4" (D) exluding control knob.
Black in color.
Order #
50-7240
Order #
50-9040
Order #
50-6155
page
54
MSRP
$14.59
(1–3)
$10.99
(4–11)
$9.19
(12-up)
$8.29
MSRP
$49.95
1-800-543-4330
Fax: 1-800-765-6960
(1-3)
$31.99
(4-up)
$26.95
Audio LeveliZer™ Line Level Stabilizer
NET 30
Terms
Customer Service: 1-877-626-3532
MSRP
$299.00
ONLY
$242.00
Home Audio/Theater
Section
3
Indoor/Outdoor, Foreground/Background Speaker Pairs
3
Rugged weatherproof speaker pairs are designed to meet the
needs of virtually any indoor or outdoor situation, in both
residential whole-house systems and distributed commercial
sound environments. Rear mounted rotary switch selects multiple
taps on the internal 70V transformer Features: •Polypropylene
cone woofers with rubber surrounds •Soft dome tweeters with
dispersion lens •UV resistant ABS resin composite enclosures
They are the ideal choice for:
✔Monitoring in the studio or small stage venues.
✔Large scale commercial systems including, retail commercial, industrial, public transportation and school environments
✔High fidelity sound distribution in clubs, sports bars,
health spas, community centers
✔Outdoor sound distribution in residential distributed systems
51⁄4" Indoor/Outdoor Speaker Pair
61⁄2" Indoor/Outdoor Speaker Pair
8" Indoor/Outdoor Speaker Pair
•51⁄4" woofers with rubber surround •1" soft dome tweeters
•Power capacity: 50W/100W RMS/peak •Sensitivity:
86dB (W/M) •Nominal impedance: 8ohm •Frequency
response: 60Hz~20KHz •Transformer taps: 2.5W, 5W,
10W, 20W, 30W •8ohm bypass •Dimensions: 10.75" (H) x
7" (W) x 6" (D) •Sold in pairs
•61⁄2" woofers with rubber surround •1" soft dome tweeters
•Power capacity: 60W/120W RMS/peak •Sensitivity:
88dB (W/M) •Nominal impedance: 8ohm •Frequency
response: 55Hz~20KHz •Transformer taps: 5W, 10W,
20W, 30W, 40W •8ohm bypass •Dimensions: 13" (H) x
83⁄4" (W) x 71⁄2" (D) •Sold in pairs
•8" woofers with rubber surround •1" soft dome tweeters
•Power capacity: 80W/160W RMS/peak •Sensitivity:
88dB (W/M) •Nominal impedance: 8ohm •Frequency
response: 45Hz~20KHz •Transformer taps: 10W, 20W,
30W, 40W, 50W •8ohm bypass •Dimensions: 17" (H) x
111⁄2" (W) x 10" (D) •Sold in pairs
Order #
50-8880
50-8881
Order #
50-8885
50-8886
Order #
50-8890
50-8891
Color White
Black
(1–3 prs.)
$84.99
84.99
(4 prs.–up)
$76.50
76.50
Color White
Black
(1–3 prs.)
$129.00
129.00
(4 prs.–up)
$116.50
116.50
Indoor/Outdoor
Speaker Pair
Color
Black
White
(1–3 prs.)
$68.99
68.99
(4 prs.–up )
$61.95
61.95
#50-7540
Order #
50-7885
AWD Series
Indoor/Outdoor
Speaker Pair
AWD Series Indoor/
Outdoor Speaker Pair
All weather design makes these an ideal choice for both
indoor and outdoor sound installations. Larger woofer size
and higher power capacity also makes these suitable in
foreground music applications. Features: •High immunity
to outdoor elements •Rubber surround •1⁄2" PEI dome
tweeter Specifications: •Power capacity: 50W/100W
RMS/peak •Frequency response: 54Hz~20KHz •SPL:
89dB (W/M) •Transformer taps 3.75W, 7.5W, 15W
and 30W (70V/25V models only) •Impedance: 8ohm
•Dimensions: 107⁄8" (H) x 83⁄4" (W) x 63⁄4" (D) •Available
in black or white •Sold in pairs
All weather design makes these an
ideal choice for both indoor and
outdoor sound installations. Included
“U” brackets and wedge design
#50-7541
allow a wide variety of mounting
capabilities. Available in 8ohm or 25V/70V transformer
configurations, they are perfect for most residential or
commercial sound applications. Features: •High immunity
to outdoor elements •51⁄4" polypropylene woofer •Rubber
surround •1⁄2" PEI dome tweeter Specifications: •Power
capacity: 40W/80W RMS/peak •Frequency response:
60Hz~20KHz •SPL: 88dB (W/M) •Transformer taps
3.75W, 7.5W, 15W and 30W (70V/25V models only)
•Non transformer model impedance: 8ohm •Dimensions:
83⁄4" (H) x 7" (W) x 53⁄8" (D) •Available in black or white
•No transformer •Sold in pairs
Order # Color Transformer
50-7550 Black
No
50-7551 White
No
Order #
50-7540
50-7541
#50-7550
(4 prs. –up)
$133.00
133.00
Follow us on:
Product Questions Email: [email protected]
Color
Black
White
MSRP
$74.95
(1-3)
$42.99
(4-9)
$39.95
(10-up)
$34.95
Weather Resistant
Foreground/
Background Speaker Pair
✔51⁄4" woofer
✔Separate 8ohm
and 70V models
✔Includes mounting brackets
(1–3 prs.)
$155.00
155.00
(4 prs.–up)
$135.00
135.00
Specifically designed for outdoor
applications, this volume control
features a specially designed gasketed
PVC enclosure, and is ideally suited for
use with landscaping “rock” speaker
and other outdoor systems. The housing
attaches to standard 3⁄4" PVC conduit for simplified
watertight installation. Internal jumpers are provided for
x1, x2, x4, x8 and x16 impedance multipliers, allowing
compatibility in standard and impedance matched
installations. Features •Detachable screw terminal strips
accept up to 14AWG speaker cable •12 step attenuation
•May be anchored by PVC conduit alone or with the four
attached wall mount tabs •Gray PVC enclosure with
matching knob Specifications •Power capacity: 100W
RMS •Frequency response: 35Hz~20KHz •Enclosure
dimensions: 43⁄4" (H) x 3" (W) x 31⁄4" (D)
#50-7551
✔61⁄2" woofer
✔8ohm model
✔Includes mounting brackets
(1–3 prs.)
$149.00
149.00
Outdoor Volume Control
Compact speakers are ideal for use with a subwoofer in
a compact home theater arrangement, or as satellites in
remote locations including the patio, deck or near the pool.
The fully weatherproof ABS housing, polypropylene cone
woofer and mylar tweeter enable permanent mounting
outdoors. Mounting brackets and hardware are included.
Specifications: •Power capacity: 30W/50W RMS/peak
each •Frequency response: 55Hz~20KHz •Impedance:
8ohm •Dimensions: 71⁄4" (H) x 41⁄2" (W) x 43⁄8" (D)
•Available in black or white •Sold in pairs
Order #
50-6580
50-6581
Color White
Black
(1–3 prs.)
$124.85
125.00
(4 prs.–up)
$104.65
105.00
This quality speaker pair is
designed to provide excellent
sound quality in commercial or
home music installations. Wedge
shape and included “U” bracket
allows easy mounting on walls, from the
ceiling, or in corners. Sealed reinforced polypropylene
housing and high power capacity make these suitable in
demanding applications, indoors or out. Aluminum grills
and brackets will not rust. 5" mica cone woofer and 1⁄2"
dome tweeter offer 45Hz~22KHz frequency response,
75W/150W nominal/max power capacity and 90dB
sensitivity. Models with built-in 70V/25V line
transformer include an external rotary selector for
5, 10, 15, 20 and 30 watt taps or 8ohm use. Great for
multi-speaker commercial applications. Dimensions:
97⁄8" (H) x 71⁄8" (W) x 53⁄4" (D). Sold in pairs.
Order #
Color
Without Transformer
50-5977
Black
50-5978
White
With Transformer
50-5982
Black
50-5983
White
MCMelectronics.com
Email: [email protected]
(1-3 prs.)
(4 prs.-up)
$89.99
89.99
$84.95
84.95
105.00
105.00
98.95
98.95
page
55
Section
3
Home Audio/Theater
6½" Two Way Outdoor
“Rock” Speaker
NEW!
NEW!
3
NEW!
5¼" Two Way Outdoor
“Rock” Speaker
These simulated rocks will
add a distinctive look to
any outdoor landscaping
arrangement, while
providing outstanding
music fidelity. Fully
sealed enclosures are
designed to provide years
of trouble free service,
and may be permanently
installed and exposed to
weather year round. Features:
•50W RMS power capacity •5¼" injected polypropylene
cone woofer •13mm mylar tweeter •75Hz~20KHz
frequency response •87dB sensitivity •8ohm
impedance •Dimensions: 9.64" x 10.25" x 9.05"
Order #
50-10530
MSRP
$59.95
ONLY
$49.99
These simulated rocks
will add a distinctive
look to any outdoor
landscaping
arrangement, while
providing outstanding
music fidelity. Fully
sealed enclosures are
designed to provide
years of trouble free
service, and may
be permanently
installed and
exposed to weather
year round. Features: •60W RMS
power capacity •61⁄2" injected polypropylene cone woofer
•13mm mylar tweeter •High-quality 6dB crossover
•60Hz~20KHz frequency response •87dB Sensitivity
•8ohm impedance •Dimensions: 11.02" x 10.63" x 12.60"
Order #
50-10535
MSRP
$89.95
ONLY
$59.99
8" Two Way
Outdoor “Rock”
Speaker
These simulated
rocks will add
a distinctive
look to any
outdoor landscaping
arrangement,
while providing
outstanding music
fidelity. Fully
sealed enclosures
are designed to
provide years of
trouble free service,
and may be permanently installed
and exposed to weather year round. Features: •70W RMS
power capacity •8" injected polypropylene cone woofer
•25mm mylar tweeter •High-quality 12dB crossover
•55Hz~20KHz frequency response •88dB sensitivity
•8ohm impedance •Dimensions: 13.39" x 11.03" x 12.21"
Order #
50-10540
MSRP
$109.00
ONLY
$79.99
Indoor/Outdoor
Speaker with
70V Transformer
Full range speaker
is compatible with
conventional 8ohm
home audio, as well
as commercial 70V
distributed systems.
Treated dual cone
driver provides
outstanding sound
quality with high
immunity to moisture
and humidity. It is perfect in home or commercial
installations, for background music, paging, and general
public address applications on patios, poolside, outdoor
restaurants etc. Included heavy duty mounting bracket
allows easy wall, floor or ceiling mounting, and unique
dispersion lens provides even 360° sound distribution.
Recessed rotary switch allows easy selection of multiple
transformer taps, 8ohm position fully bypasses
transformer, allowing maximum frequency response
in home systems. Specifications: •Power capacity:
20W RMS •Frequency response: 80Hz~20KHz
(excluding transformer) •Transformer taps: 2.5W, 5W,
10W, 20W •SPL: 90dB 1W/1M •Driver: 61⁄2" dual cone
•Magnet size: 10 oz. •Dimensions: 8" (dia.) x 10" (H)
Order #
50-572
MSRP
$69.95
(1–3)
$39.99
Heavy-duty ABS speaker system
features a soft dome tweeter, and high
excursion 8" woofer, and is capable of
delivering 30Hz~20KHz frequency
response. Internal 70V transformer
allows compatibility with distributed
commercial systems, and 8ohm bypass
provides full frequency response. Specifications:
•Power capacity: 75W/150W RMS/peak •Impedance:
8ohm •Transformer taps: 5W, 10W, 15W, 20W and 30W
•Dimensions: 153⁄4" (H) x 10" (W) x 9" (D) •Black color
•Sold individually
page
56
MSRP
$199.00
(1-3)
$125.00
(4-up)
$110.00
#50-7410
✔4" woofer
✔6ohm use only
✔Includes mounting brackets
#50-7411
This quality speaker pair is ideal for use on decks, patios,
automobiles or in surround sound applications. Included
“U” brackets allow easy mounting on walls or from the
ceiling. Moisture and weather resistant housing, and
polypropylene components allow use indoors or out. 4"
long excursion woofer, 2" midrange and 3⁄4" tweeter offer
90Hz~20KHz frequency response, 25W/40W RMS/peak
power capacity and 85dB sensitivity. Dimensions: 73⁄8" (H)
x 45⁄8" (W) x 45⁄8" (D). 4~8ohm compatible. Nominal
impedance 6ohm. Sold in pairs.
Order #
50-5995
50-5996
Color Black White (1-3 prs.) $31.99 31.99 (4 prs.-up)
$29.95
29.95
#50-7425
#50-7415
#50-7430
Stainless Steel Series
Speaker Mounts
(4–up)
$38.75
Two-Way
Monitor Speaker
Order #
555-1864
Weather Resistant Foreground/
Background Speaker Pair
Audio Basics
Ceiling/Wall
Speaker Mounts
The perfect value
oriented companion
to home theater and
audio applications
for mounting front,
center, or rear channel
speakers to either
wall or ceiling. The AB2 is for larger satellite and small
bookshelf speakers, weighing up to 8 lbs. Each is made
of durable, weather resistant fiber reinforced polymer,
and includes all mounting hardware and correct drill bit,
for perfect installation every time. Each model is available
in black or white, and is sold individually. Specially
priced five–packs are available or traditional
5.1 audio systems. Limited quantities.
Order #
50-7450
50-7451
50-7455
Model
AB2
AB2
AB2-HTS
Set Single Single
Five pack
1-800-543-4330
Fax: 1-800-765-6960
Color
Black
White
Black
ONLY
$17.99
17.99
59.99
Designed for heavier systems,
these mounts are perfect for
everything from surround and
satellite speakers, foreground
speakers and studio monitors.
Unique ball and clamp design
allows wide range of movement,
with secure positioning of heavy
speakers. Stainless steel hardware ensures strength,
durability and all weather use. Available in wall or ceiling
mount versions, with weight capacity from 5 lbs. to 20
lbs., a model is available to suit any need. 5 lb. versions
include hardware for wall or ceiling mount, all others
must be specified. Available in black, white or gray,
mounts are sold individually and include all mounting
hardware and correct drill bit, for perfect installation
every time. Sold individually.
Weight
Order # Capacity (lbs.)
50-7410
5.0 50-7411
5.0 50-7412
5.0 50-7415
10.0 50-7425
20.0
50-7430
20.0 50-7431
20.0 NET 30
Terms
Customer Service: 1-877-626-3532
Type
Wall/ceiling
Wall/ceiling
Wall/ceiling
Wall
Wall
Ceiling
Ceiling
Color
Black
Gray
White
Black
Black
Black
White
ONLY
$18.99
18.99
18.99
22.99
30.99
30.99
30.99
Home Audio/Theater
Dipolar Rear
Channel Speaker
4Dipolar design
4Dual 51⁄4" woofers
4Simulated black
ash vinyl veneer
Center Channel
Speaker System
Order #
50-6855
MSRP
$69.95
(1-3)
$32.99
(4-up)
$29.95
Highly versatile speakers
include a base stand for
bookshelf use, and a “U”
bracket for wall mounting.
Their rugged enclosures
and stainless steel
hardware make these suitable for
outdoor use, while the superior quality
components provide outstanding performance expected of
a pair of bookshelf speakers. Features: •61⁄2" poly woofer
with rubber surround •13mm mylar tweeter •Gold plated
connections Specifications: •Power capacity: 50W RMS
•Frequency response: 55Hz~20KHz •Sensitivity: 89dB
(W/M) •Impedance: 8ohm •Dimensions: 13" (H) x
75⁄8" (W) x 7" (D) •Sold in pairs
Model #
BA-650OB
BA-650OW
Color
Black
White
ONLY
$79.99
79.99
Single Stereo Indoor/
Outdoor Speaker
Often times a pair of outdoor
speakers is impractical or
undesired. In some areas,
actual stereo imaging may
not be a possibility, yet both
channels need to be heard.
This speaker features a dual voice coil
woofer and two tweeters, allowing it to provide
both left and right channels from
a single point. Highly versatile speakers include a base
stand for bookshelf use, and a “U” bracket for wall
mounting. Their rugged enclosures and stainless steel
hardware make these suitable for indoor or outdoor
use. Features: •61⁄2" poly woofer with rubber surround
•Dual 13mm mylar tweeters •Gold plated connections
Specifications: •Power capacity: 40W RMS (each
channel) •Frequency response: 60Hz~20KHz
•Sensitivity: 88dB (W/M) •Impedance: 8ohm
(each channel) •Dimensions: 13" (H) x 75⁄8" (W) x
7" (D) •Sold individually
Order #
50-4672
50-4673
Model #
BA-650-OSB
BA-650-OSW
4Simulated black ash vinyl veneer
41⁄2" mylar dome tweeter
4Dual 4" woofers
Attractive center channel speaker features simulated
black ash vinyl veneer, and a partially transparent,
removable black grill. Intended to be a perfect match
to model #50-9085 bookshelf speakers, this speaker
will blend beautifully with any existing system.
Features: •Dual poly cone 4" woofers, with single
piece concave cone, and rubber surrounds •1⁄2" mylar
dome tweeter •Rear ported enclosure Specifications:
•Power capacity: 80W/120W RMS/peak •Frequency
response: 50Hz~20KHz •Sensitivity: 88dB (W/M)
•Impedance: 8ohm •Dimensions: 6" (H) x
17.75" (W) x 6.5" (D) •Sold individually
Order #
50-9080
MSRP
$39.95
(1-3)
$29.99
(4-up)
$26.95
Center Channel
Speaker
System
Color
Black
White
ONLY
$105.00
105.00
Follow us on:
Product Questions Email: [email protected]
Beautifully crafted speaker system intended to be
a perfect match to Model #50-9075 bookshelf speakers,
this speaker will blend beautifully with any existing
system. Features: •1" soft dome tweeter •Rear ported
enclosure Specifications: •Power capacity: 125W/275W
RMS/peak •Frequency response: 70Hz~20KHz
•Sensitivity: 87dB (W/M) •Impedance: 8ohm
•Dimensions: 6.3" (H) x 16.5" (W) x 7.9" (D)
•Sold individually
Order #
50-9070
Bookshelf
Speaker Pair
4Simulated black
ash vinyl veneer
41⁄2" mylar
dome tweeter
44" woofer
Attractive speaker
pair features
simulated black
ash vinyl veneer,
and a partially
transparent, removable black grill. Intended to be a perfect
match to model #50-9080 center channel speaker, they are
perfectly suitable as front or rear speakers in any home theater
environment. Features: •Poly cone 4" woofer, with single
piece concave cone, and rubber surround •1⁄2" mylar dome
tweeter •Rear ported enclosure Specifications: •Power
capacity: 60W/120W RMS/peak •Frequency response:
60Hz~20KHz •Sensitivity: 87dB (W/M) •Impedance: 8ohm
•Dimensions: 9.5" (H) x 6" (W) x 6.5" (D) •Sold in pairs
Order #
50-9085
✔Stunning high
gloss finish
✔1" soft dome tweeter
✔Dual 51⁄4" woofers
Indoor/Outdoor
Speaker Pairs
Order #
50-4670
50-4671
MSRP
$199.00
(1-3)
$99.99
(4-up)
$93.50
5.1 Digital Sound Bar
3
MSRP
$49.95
(1-3 prs.)
$36.99
(4 prs.-up)
$34.95
Bookshelf
Speaker Pair
✔Stunning high
gloss finish
✔1" soft dome tweeter
✔51⁄4" woofer with
phase plug
Beautifully crafted
speaker pair features a
high gloss piano black finish that is sure to compliment
any décor. Intended to be a perfect match to model
#50-9070 center channel speaker, they are perfectly
suitable as front or rear speakers in any home theater
environment. Features: •51⁄4" poly cone woofer, with
rubber surround and steel phase plug •1" soft dome
tweeter •Rear ported enclosure Specifications: •Power
capacity: 75W/225W RMS/peak •Frequency response:
49Hz~20KHz •Sensitivity: 88dB (W/M) •Impedance:
8ohm •Dimensions: 9.9" (H) x 6.3" (W) x 7.9" (D)
•Sold in pairs
Order #
50-9075
MSRP
$249.00
(1-3 prs.)
$119.00
(4 prs.-up)
$109.00
The Kinyo ArtDio® amplified
sound bar with matching
subwoofer delivers 5.1 audio
with surprising performance and
surround effect. The sound bar
measures 311⁄2" wide, and houses
five 3" full range drivers, each
driven by independent amplifier
channels. The drivers are specifically positioned within the
enclosure to provide three-dimensional realism amazingly
similar to speakers surrounding the listener.
A separate active subwoofer features an 8" driver in a
tuned ported enclosure, and is powered by its own 60W
amplifier. The internal decoder supports Dolby® Digital,
DTS®, Dolby® Pro-Logic® II and accepts both Toslink and
coaxial digital inputs. It is a perfect match for flat panel
monitors in areas where an overly involved home theater
system is not desired or practical. Features: •Two optical
and two coaxial inputs •Two analog L/R stereo inputs
•Discrete six channel 5.1 input •Included 21 button IR
remote control •Backlit LCD display showing settings,
functions and operation •Includes connecting cables
required for most applications, and wall mount hardware
Specifications: sound bar: •Power output: 12W five
channels •Dimensions: 5.51" (H) x 31.5" (W) x 5.12" (D)
Subwoofer: •Power output: 60W •Dimensions: 15.35" (H)
x 7.48" (W) x 13.39" (D) •Power requirements: 120VAC,
60Hz, 240W. •Mfr. #HT-1037
This down-firing active
subwoofer features a
highly efficient 100W
amplifier, long throw 10"
low frequency driver and
flared front port, for
excellent low frequency
response. Its subdued
simulated black ash finish
will complement any
décor. This unit is an ideal
addition with any home theater speaker system that
utilizes 6~8" woofers. Features: •Ported 3⁄4" MDF
cabinet •0°/180° phase selector •Line level inputs, with
feedthrough outputs •Speaker level inputs, with high pass
satellite speaker outputs •Lighted rocker power switch
•Included speaker spikes Specifications: •Output power:
100W/150W RMS/peak •Frequency response:
30~180Hz •Variable crossover range: 20~180Hz
•Power requirements: 110VAC, 60Hz •Dimensions
(excluding spikes): 14" (H) x 13.75" (W) x 14.5" (D).
Order #
50-9300
Order #
50-7660
MSRP
$349.95
ONLY
$299.00
Active 10" Subwoofer
MCMelectronics.com
Email: [email protected]
MSRP
$199.00
ONLY
$69.99
page
57
3
Dual woofers and dual
tweeters, arranged in a
di-polar configuration,
make this speaker
perfect for surround
channel applications.
Positioned at the rear,
directly at the left and right
of the listening position, these
speakers provide the outstanding
imaging intended for 5.1, THX and Dolby Digital
systems. They are also great for compact systems in
conventional two channel stereo environments. Features:
•Dual 51⁄4" woofers •Dual 1⁄2" mylar dome tweeters with
specially designed dispersion lens •Dual front ports
•Attractive simulated black ash vinyl veneer enclosure
with removable black grills •Wall mount hanger •Color
coded push terminals which accept up to 16AWG wire
Specifications: •Power capacity: 50W/100W RMS/peak
•Frequency response: 80Hz~20KHz •Impedance:
8ohm •Dimensions: 11" (H) x 11" (W) x 65⁄8" (D)
•Sold individually
Section
Section
3
Home Audio/Theater
Five Disc Carousel
CD Changer
NEW!
3
Dolby® Digital 5.1 Receiver
NEW!
Dolby® Digital TrueHD 7.1 Receiver
✔100W x 7CH dual zone receiver
✔HDMI 1.3 repeater with 3 in and 1 out
✔Dolby Tru-HD and DTS Master Audio HD
This Blue Tooth and Sirius ready receiver provides 100W
per channel with no more than 0.2% THD into 8ohm for
each of seven channels. Features: HDMI 1.3 repeater
•Lossless audio •DTS master audio HD •Dolby TrueHD
•DTS 96/24/ES/Neo6 •Dolby DPLIIx •DSD (SACD)
•LMP (DVD-A) •Totally discrete amplifier stage for all
channels •Eight DSP surround modes •192KHz/24 bit D/A
convertors for all channels •Digitally remasters PCM to
96KHz/24 bit •Multi-source, dual zone operation •7.1
channel direct input •Automatic speaker set-up with
supplied microphone •SNAP™ room EQ •Quadruple
crossover •A/V synch delay by input •Three A/V inputs
and two A/V outputs •Universal video up conversion •Two
component video inputs •Component video output •Three
HDMI inputs •One HDMI output •Eight analog inputs
(including tuner) •Analog output •Composite and S-video
with three inputs and two outputs •Four digital inputs (two
coaxial and two optical) •Optical digital output •Multi–
stage dynamic range control •Cinema EQ •Tone direct
•Speaker on/off switch •Color coded speaker terminals
•Quartz PLL synthesized AM/FM tuning •Sirius ready
•30AM/FM tuner presets •Preprogrammed IR remote
control •Blue tooth front panel receptacle for optional
receiver •Model #RD-7503
Order #
50-5390
Dolby® Digital 5.1 Receiver
✔100W x 5CH receiver
✔2 x 1 HDMI repeater/switcher
✔Dolby Digital EX, DPLII
ONLY
$379.00
NEW!
✔100W x 5CH receiver
✔2 x 1 HDMI switcher
✔Dolby Digital EX, DPLII
This receiver provides 100W per channel, with no more
than 0.2% THD into 6ohm for each of five channels.
Features: •Dolby Digital EX •DPLII •Totally discrete
amplifier stage for all channels •Three DSP surround
modes •192KHz/24 bit D/A convertors for all channels
•5.1 channel direct input •Automatic speaker set up with
supplied microphone •SNAP™ Room EQ •Three A/V
inputs and two A/V outputs •Two component video inputs
•Component video output •2 x 1 HDMI switching •Front
panel receptacle for optional Blue Tooth receiver •Three
analog inputs (including tuner) •One analog output •Three
composite video inputs and two composite video outputs
•Three digital inputs (two coaxial and one optical) •Multistage dynamic range control •Cinema EQ •Tone direct
•Speaker on/off switch •Color coded speaker terminals
•Quartz PLL synthesized AM/FM tuning •30 AM/FM
tuner presets •Model #RD-6504
Order #
50-5400
ONLY
$179.00
Order #
50-7805
Mfr. #
RX-4105
ONLY
$99.99
Order #
50-5395
Order #
50-7806
58
ONLY
$194.00
Dual Cassette Deck
Dual cassette deck is the perfect addition to any
home theater system requiring tape capability. Included
mounting hardware also allows the unit to be easily
installed in a standard 19" equipment rack. Features:
•Dynamic noise reduction •Normal and high speed
dubbing •CrO2 and normal tape selector •Three digit tape
counter •LED level meters • Capability for use with IR
remote when used with the matching PT600A integrated
amplifier •110/220V switchable power input •Dimensions
(excluding rack ears): 5.5" (H) x 16.5" (W) x 9" (D)
•Mfr. #PT649D
(1-3)
$93.99
(4-up)
$92.95
Stereo Receiver
Straight-forward AM/FM receiver features outstanding
tuner sensitivity, multiple component inputs, and a solid,
discrete output, 100W RMS x two channel stereo
amplifier. Additionally, the included remote control
operates the relay switching for the A/B speaker outputs.
Features: •AM/FM stereo tuning with 30 station presets
•Large fluorescent display •Included 25 key IR remote
control •Four line level inputs (plus tuner) •Digital
encoder volume control •Headphone jack •Sleep timer
Specifications: •THD: <0.08%, 20Hz~20KHz @ 8ohm
•S/N ratio: >90dB •IHF FM tuner sensitivity: 17.2dBf
•FM frequency response: 40Hz~12KHz •AM tuner
sensitivity: 800µV/M •AM frequency response:
100Hz~2.3KHz • Dimensions: 47⁄8" (H) x
173⁄8" (W) x 14" (D)
Straight-forward AM/FM receiver features outstanding
tuner sensitivity, multiple component inputs, and a
solid, discrete output, 100W RMS x two channel stereo
amplifier. Features: •AM/FM stereo tuning with 30
station presets •Large fluorescent display •Included IR
remote control •Four line level inputs (plus tuner) •Digital
encoder volume control •Headphone jack •Sleep timer
•Mfr. #RD-4109
page
Order #
50-6321
Order #
50-6650
This receiver provides 100W per channel, with no more
than 0.2% THD into 6ohm for each of five channels.
Features: •Dolby Digital EX •DPLII •Totally discrete
amplifier stage for all channels •Three DSP surround
modes •192KHz/24 bit D/A convertors for all channels
•5.1 channel direct input •Automatic speaker set up with
supplied microphone •SNAP™ Room EQ •Three A/V
inputs and two A/V outputs •Two component video inputs
•Component video output •2 x 1 HDMI switching, plus
repeater for extended cable length •Front panel receptacle
for optional Blue Tooth receiver •Three analog inputs
(including tuner) •One analog output •Three composite
video inputs and two composite video outputs •Three
digital inputs (two coaxial and one optical) •Multi-stage
dynamic range control •Cinema EQ •Tone direct •Speaker
on/off switch •Color coded speaker terminals •Quartz PLL
synthesized AM/FM tuning •30 AM/FM tuner presets
•Model #RD-6504
ONLY
$229.00
Front loading multi–disc player features a one–bit
twin D/A convertor, random sequential play, and bright
fluorescent display with music calendar. Other features
include: •Coaxial digital output •8x oversampling •Three
beam laser pick-up •Headphone output with volume
control •Compatibility with Sherwood Digi–Link remote
control system •Mfr. #CDC-5090R
AM/FM Digital Tuner
The ideal mate for the PR330A Stereo Amplifier, this
quartz locked tuner is compatible with any amplifier with
line level inputs. The IR remote control included with the
PR330A will operate this tuner. Features include: •Bright
fluorescent digital display •20 station memory •Auto
station scanning •Signal lock indicator RCA pre-amp out
•Included AM and FM antennas •Dimensions: 16" (W) x
4" (H) x 9" (D) •Black color •Mfr. #PR33T
Order #
50-6045
Rear
Panel A/V
Extenders
Stereo Receiver
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$109.00
(ea.)
$79.99 (2-up)
$70.95
#24-6595
Easily
connect and re-connect video games, camcorders and
portable audio/video devices to your television’s audio/
video inputs without having to turn the television around
each time. These extenders will save your back from
strains and virtually eliminate the danger of dropping
your television every time you plug into the A/V inputs.
Standard A/V inputs via “RCA” type jacks on the front
or side of your television and “RCA” type plugs for
the rear. Available with S-video capability for such
equipped devices.
Order # Description
(ea.) (2-4) (5-up)
24-6595 A/V and S-video (shown)$14.99 $13.50 $12.00
24-6600 A/V only
12.99 11.50 10.75
NET 30
Terms
Customer Service: 1-877-626-3532
NEW!
Home Audio/Theater
NEW!
Section
3
7.1 Channel Home Theater A/V Receiver
✔1080p Video Switching
✔7.1 Channel Audio
Order #
STR-DG1200
(1-9)
$879.00
STR-DN1000 7.1 Channel
Home Theater A/V Receiver
Get amazing 1080p video and 7.1 channels of pristine
surround sound. This versatile audio/video receiver
features full HD 1080 experience. With 1080/24p
capability you get the most from Blu-ray Disc™ movies.
Features: •110W x 7 channels •S-Air capability •On
screen GUI •A/V sync •Digital Cinema Sound™ •Dolby®
Digital Decoding, Dolby® Pro Logic® II Decoding, Dolby®
Digital EX Decoding, Dolby® Pro Logic® IIX Decoding
and Dolby® Pro Logic® Decoding Inputs: •4 x 1080p
HDMI™, 3 x component video, digital media port, 4 x
composite video, 2 x optical audio, coaxial audio, 5 x
RCA audio, antenna terminal (AM loop) and antenna
terminal (FM 75ohm) Outputs: •1080p HDMI™
connection, component video, composite video,
2 x RCA audio, subwoofer, and headphone
Speaker terminal type: •Screw
Order #
STR-DN1000
(1-9)
$499.00
(10-up)
$492.00
(10-up)
$861.42
STR-DH700 Home Theater A/V Receiver
Get amazing 1080p video and 7.1 channels of pristine
surround sound. This versatile audio/video receiver
features full HD 1080 experience. With 1080/24p
capability you get the most from Blu-ray Disc™
movies.Features: •105W x 7 channels •S-Air capability
•A/V Sync • Digital Cinema Sound™ •Dolby® Digital
Decoding, Dolby® Pro Logic® II Decoding, Dolby®
Digital EX Decoding, Dolby® Pro Logic® IIX Decoding
and Dolby® Pro Logic® Decoding Inputs: •3 x 1080p
HDMI™, 3 x component video, 1 x digital media port, 4 x
composite video, 2 x optical audio, 1 x coaxial audio, 5 x
RCA audio, 1 antenna terminal (AM loop) and 1 antenna
terminal (FM 75ohm) Outputs: •1080p HDMI™
connection, component video, composite video,
subwoofer, and headphone Speaker terminal type:
•Front: Screw •All others: Push
Get amazing 1080p video and 5.1 channels of pristine
surround sound. This versatile audio/video receiver
features HDMI™ “Pass-through” and 1080/24p capability
to help you get the most from Blu-ray Disc™ movies.
Features: •100W x 5 channels •HDMI™ pass-through
•A/V sync • Digital Cinema Sound™ •Dolby® Digital
Decoding, Dolby® Pro Logic® II Decoding, Dolby®
Digital EX Decoding, Dolby® Pro Logic® IIX Decoding
and Dolby® Pro Logic® Decoding Inputs: •Three 1080p
HDMI™ •Three component video •Digital media port
•Two composite video •Two optical audio •Coaxial
audio •Four RCA audio •Antenna terminal (AM loop)
•Antenna terminal (FM 75ohm) Outputs: •1080p
HDMI™ connection •Component video •Composite
video, •Subwoofer •Headphone Speaker terminal
type: •Front: Banana •Rear and center: Push
(10-up)
$195.02
Get amazing 1080p video and 7.1 channels of pristine
surround sound. This versatile audio/video receiver
features full HD 1080 experience. With 1080/24p
capability you get the most from Blu-ray Disc™
movies.Features: •110W x 7 channels •S-Air capability
•A/V Sync • Digital Cinema Sound™ •Dolby® Digital
Decoding, Dolby® Pro Logic® II Decoding, Dolby®
Digital EX Decoding, Dolby® Pro Logic® IIX Decoding
and Dolby® Pro Logic® Decoding Inputs: •4 x 1080p
HDMI™, 3 x component video, digital media port, 4 x
composite video, 2 x optical audio, coaxial audio, 5 x
RCA audio, antenna terminal (AM /loop) and antenna
terminal (FM 75ohm) Outputs: •1080p HDMI™
connection, component video, composite video, 2 x
RCA audio, subwoofer, and headphone Speaker
terminal type: •Front: Screw •All others: Push
Order #
STR-DH800
(1-9)
$299.00
(10-up)
$293.02
NEW!
STR-DH800 7.1 Channel
Home Theater A/V Receiver
STR-DH500 Home Theater A/V Receiver
(1-9)
$199.00
NEW!
Order #
STR-DH700
NEW!
Order #
STR-DH500
3
Get amazing 1080p video and 7.1 channels of pristine
surround sound. This versatile audio/video receiver
features HDMI™ 1080/24p capability to help you
get the most from Blu-ray Disc™ movies. Also enjoy
built-in XM and PMP connections Features: •HDMI™
1080/24p •A/V Sync •Digital Cinema Sound™ •Digital
media port •Dolby® Digital Decoding, Dolby® Pro Logic®
II Decoding, Dolby® Digital EX Decoding, Dolby® Pro
Logic® IIX Decoding, dts® 96/24 Decoding, dts® NEO:6
Decoding, dts®-ES Decoding and Dolby® Pro Logic®
decoding •XM connect and play ready Inputs: •One
composite video input, five optical audio inputs, three
coaxial audio inputs, five RCA audio inputs, three
component video input and four 1080p HDMI™ inputs
Outputs: •Three composite video output, one component
video output and one 1080p HDMI™ connection, one
subwoofer output, one antenna terminal (AM loop),
one antenna terminal (FM 75ohm), one headphone
output Speaker terminal type:
•Screw binding posts (A & B)
(1-9)
$399.00
(10-up)
$391.02
NEW!
STR-DH100 Audio Receiver
Enjoy bolder, quality sound without the fuss.
The solid, 2-channel STR-DH100 stereo receiver
delivers clear stereo sound for everyday music
fans and rooms where a complex home theater
system is not needed. With the right mix of inputs
and technologies, the STR-DH100 transforms any
secondary living environment into a concert hall. In
addition, it also includes the Digital Media Port input that
allows you to extend your music selection from an iPod®,
Walkman® digital music player, Bluetooth® device or
from a PC (accessories sold separately). Features: •100W
x 2 channels •5 audio inputs and 2 audio Inputs: 5 x RCA
audio, antenna terminal (AM loop) and antenna terminal
(FM 75ohm) Outputs: 2 x RCA audio and headphone
Speaker terminal type: •A & B: Spring clip
Order #
STR-DH100
NEW!
(1-9)
$149.00
(10-up)
$146.02
NEW!
Five Disc DVD Changer with HDMI™ and 1080p Upscaling
The DVP-NC800H is the five disc DVD/CD player solution your home theater has been
waiting for. Enjoy your DVD collection, upscaled to gorgeous 1080p via the HDMI™
connection. Plus, with BRAVIA® Sync, you can easily power on and synch the inputs
of compatible Sony AV devices connected to the players via HDMI for hassle-free
enjoyment. Includes AV cable and remote control with batteries. Features: •High
resolution jpeg output •Precision cinema progressive™ technology •12 bit/108MHz
video DAC •Multi disc resume •Multi brand TV remote control
Enjoy audio files stored on your home or office computer with
the CPF-IX001 wireless streaming music system. Once you add power and an ethernet
connection, you’re ready to directly access your entire library of music on your PC. This
compact device features a unique subwoofer and digital amplifier technology which will
fill your room with high-quality sound.
Order #
DVP-NC800H/B
Order #
CPF-IX001
(1-9)
$129.00
Follow us on:
Product Questions Email: [email protected]
(10-up)
$127.00
Wireless Network Audio System
(1-9)
$249.00
MCMelectronics.com
Email: [email protected]
(10-up)
$244.02
page
59
Section
3
Home Audio/Theater
1080p Upconversion DVD
Player with HDMI and DivX® Playback
3
Home Entertainment Server
Provide endless home entertainment
with this unique multimedia server.
Equipped with a 200 Blu-Ray Disc™
changer and a 500Gb hard drive, it
is the ultimate media organization
solution for your digital movies,
music and photos in one attractive,
stand-alone device. Features: •Hard
drive can hold up to: 137 hours of
video, 2000 music albums, or 20,000
photos •Dolby® TrueHD decoder
built-in •Music streaming: Enjoy
music in multiple rooms using
DLNA compliant clients, such as
the separately available CPF-IX001
wireless PC audio system •Multi brand TV remote control
Order #
HES-V1000
(1-9)
$3459.00
(10-up)
$3389.82
BDP-S360 Blu-Ray Disc Player
Experience the next wave of home entertainment with this
Blu-ray Disc™ player, featuring Dolby® TrueHD™ and
BD-Live compatibility. This player also outputs a full
1080/24p true cinema picture, plus upscales your existing
DVD collection to 1080p when using the HDMI™
connection. Superior picture quality isn’t the only
thing you’ll notice, the BDP-S360 comes with Dolby®
TrueHD™ which delivers sound as stunning as the high
definition picture itself. Bringing it all together is the new
icon based Xcross Media Bar, which provides simple
navigation of the player’s menu system. Features:
•DVD upscale to 1080p •Dolby® TrueHD decoder
built-in •BD-Live Technology •BRAVIA™ sync
•Multi brand TV remote control
Order #
BDP-S360
ONLY
$179.00
Order #
80-7195
Progressive Scan DVD Player
Sony’s DVP-SR200P is a versatile DVD player with many
features at an affordable price. It delivers excellent picture
and sound quality so you get the most out of your movies.
The “Precision Drive 3” system allows you to playback
some DVDs that may have been damaged or warped
without a degradation of picture quality. •Features: •Mp3
playback •12 bit/108MHz video DAC •Multi disc resume
(six discs) •Multi brand TV remote control
Order #
DVP-SR200P/B
ONLY
$39.99
DVD Recorder/VCR Combo with
HDMI™ and 1080p Upscaling
The RDR-VX560 DVD Recorder/VCR combo is just
what your cable box ordered. Save your favorite TV
shows, archive old VHS tapes, even burn photos and
personal video from Sony USB-based camcorders and
digital cameras with ease. You’ll also appreciate its
convenient ability to bring DVD-recording into your
living room. Includes AV cable and remote control
with batteries. Unit is black. Features: •Jpeg and mp3
playback •Cable box/satellite receiver control through
IR blaster •BRAVIA™ Sync •Two-way “One Touch
Dubbing” from VCR to DVD or reverse •Multi brand
TV remote control
This progressive scan DVD player combines traditional
features with the most cutting-edge in digital video,
all in an ultra-slim package. An HDMI output converts
your video to near-HD quality for a premium viewing
experience. Enjoy DVD discs, play DivX® digital video,
or access your digital media directly from USB/SD cards.
Dolby digital audio provides a dynamic range of sound,
while multiple AV outputs allow for quick and easy
connection to your home theater system. Features:
•Progressive scan DVD player with 1080p video output
for use with full HD-capable TVs •Upconverts DVD video
to near-HD quality (1080p) •DVD, DVD±R/RW, CD,
CD-R/RW, and JPEG compatible •Official DivX® certified
product •Plays all versions of DivX® video (including
DivX®® 6) with standard playback of DivX® media files
•Plays digital MPEG-4 video files (XviD) •Plays digital
media files directly from USB drives and SD/MMC cards
•Dolby digital decoder •HDMI output for perfect digital
signal transmission to home theater systems over a single
cable •Digital and analog AV outputs for home theater
use •NTSC/PAL compatible •Convenient front panel
and on-screen display •Multiple language, subtitle, and
camera angle support •Parental lock control •100~240VAC
automatic power switching •FCC approved and ETL listed
Included accessories: •Remote control •Two “AAA”
batteries •AV cable
ONLY
$49.99
BDP-S560 Blu-Ray Disc Player
Experience the next wave of home entertainment with
this Blu-ray Disc™ player, featuring Dolby® TrueHD™
and BD-Live compatibility. This player also outputs
a full 1080/24p true cinema picture, plus upscales
your existing DVD collection to 1080p when using
the HDMI™ connection. Superior picture quality isn’t
the only thing you’ll notice, the BDP-S560 comes with
Dolby® TrueHD™ which delivers sound as stunning as
the high definition picture itself. Bringing it all together
is the new icon based Xcross Media Bar, which provides
simple navigation of the player’s menu system. Features:
•802.11n wireless Technology •DVD upscale to 1080p
•Dolby® TrueHD decoder built-in •7.1 Analog audio
output •Ethernet port •Multi brand TV remote control
•Photo streaming
Order #
BDP-S560
(1-9)
$349.00
(10-up)
$342.02
Compact DVD Player
For optimal performance in a compact package, the DVD
player is unbeatable. This progressive scan DVD player
offers the best available features in a streamlined design,
with Dolby® Digital decoding, AV outputs for home
theater connection, and multi-function onscreen display
that lets you customize the player to fit your needs.
Features: •Progressive scan DVD player •Compact and
slim design •DVD, DVD±R/RW, CD, CD-R/RW, and jpeg
compatible •Dolby® Digital decoder •Digital and analog
AV outputs for home theater use •NTSC/PAL compatible
•Convenient on-screen display •Multiple language,
subtitle, and camera angle support •Picture
zoom function •Parental lock control •100~240VAC
automatic power switching •FCC approved and ETL
listed Included accessories: •Remote control •Two
“AAA” batteries •AV cable
Order #
80-7190
ONLY
$29.99
Portable HD
Radio® System
Experience more
choices, crystal clear
sound, and no subscription
fees. Enjoy music the way it was meant to be heard with
AM stations that can deliver FM sound quality and FM
stations that sound like your favorite CDs. With static-free
sound and an easy-to-read dot matrix LCD for viewing
important information, the XDR-F1HD receiver is the
perfect choice for adding HD radio reception to a home
audio system. Includes remote control.
Introducing the Coby
HDR-700 portable HD
radio system featuring
a splash-proof housing
that allows for indoor or
outdoor use. Enjoy
crystal-clear digital
broadcasts anytime,
anywhere with no
subscription fees in highdefinition audio. Features: •HD radio tuner receives
crystal clear digital broadcasts with no subscription fees
•Receives AM/FM analog broadcasts •Ten AM and ten
FM radio station preset memory •High-contrast LCD
display with backlight •Integrated rechargeable battery
provides up to five hours of play time •Splash-proof
housing allows for indoor or outdoor use •Integrated fullrange speaker system •3.5mm audio line-in jack for use
with any portable audio device •3.5mm headphone jack
Included accessories: •UL AC adapter •AM loop antenna
Introducing the Coby HDR-650 component HD radio
receiver. This sharp HD radio receiver features brushed
aluminum casing designed to complement your other
components with style. Enjoy crystal-clear digital
broadcasts with no subscription fees in high-definition
audio. Features: •HD radio tuner receives crystal clear
digital broadcasts with no subscription fees •Receives AM/
FM analog broadcasts •Ten AM and ten FM radio station
preset memory •High-contrast LCD display with backlight
•Brushed aluminum casing designed to complement your
other components in style •Stereo RCA connectors for use
with home audio systems •3.5mm headphone jack •Full
function remote control Included accessories: •UL AC
adapter •AM loop antenna •FM wire antenna •AV cable
•Remote control
Order #
XDR-F1HD
Order #
80-7245
Order #
80-7240
Order #
RDR-VX560
(1-9)
$231.00
(10-up)
$229.99
HD Radio™
Receiver
page
60
(1-9)
$99.99
(10-up)
$97.95
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$149.00
Component HD Radio® Receiver
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$99.49
Home Audio/Theater
5.1-Channel DVD Home Theater System
Order #
80-7205
ONLY
$79.99
2.1 Channel DVD Home Theater System
The Coby DVD420 2.1-channel DVD home theater system
makes home theater set-up quick and easy. With two fullrange satellite speakers and a subwoofer with tuned port
for deep bass response and an ultra-compact DVD player,
this package can get you up and running in a flash. It also
supports a host of media formats including DVD, DVD±R/
RW, CD, CD-R/RW and is jpeg compatible. Features:
•Dolby digital decoder •Digital and analog AV outputs
for home theater use •NTSC/PAL compatible •Convenient
on-screen display •Multiple language, subtitle, and camera
angle support •Picture zoom function •Parental lock
control •FCC approved and ETL listed •2.1 channel
system with 75W total output power •Two full-range
satellite speakers •Wooden subwoofer with tuned port
for deep bass response •Convenient volume and bass
level controls Included accessories: •Remote control
•Two “AAA” batteries •AC power cord •AV cable
•Speaker cables
Order #
80-7200
ONLY
$58.49
19" Widescreen
HDTV LCD
Television
Cobys’ IR825 puts cutting-edge radio in a compact
package. Featuring both wireless internet and FM
receiver, this compact system receives broadcasts
from both traditional and web radio, giving you flawless
reception, premium sound, and thousands of stations
to choose from. Programmable station memory lets you
save your favorite channels, digital or analog. Additional
features include full-range stereo speakers, alarm clock
function, and 3.5mm headphone jack for private listening.
Features: •Access thousands of radio stations free from
around the world with a Wi-Fi internet connection
•Receives local FM radio broadcasts •Enjoy your
entire music collection wirelessly from a computer •Large
easy-to-read display •Five internet radio and five FM radio
station preset memory •Clock with alarm and sleep timers
•Full-range stereo speakers •Convenient 3.5mm headphone
jack Included accessories: •UL AC adapter
Coby’s 19"
LCD TV offers a
premium viewing
experience,
featuring brilliant
picture, liquidcrystal display, and
dual ATSC/NTSC
tuners for great reception of digital signal (DTV-ready).
With an HDMI digital connection and a 15 pin VGA
interface, this television is perfect for use as a television
or computer monitor. Integrated full-range stereo speakers,
AV inputs and digital noise reduction also included.
Features: •19" TFT LCD color display •Dual ATSC/NTSC
tuners for digital and standard TV broadcast reception
(DTV-ready) •HDMI digital connection for perfect AV
signal transmission •HDCP compliance for HDCP content
support •AV input jacks for use with media players, DVR/
VCRs, video games, and more •15 pin VGA interface for
use with computer systems •Full-range stereo speakers
(10W) •Digital comb filter and noise reduction •V-chip
parental control, closed-caption, and electronic program
guide support •Multi-language on-screen display •Wallmountable design (VESA 75mm x 75mm). Included
accessories: •AV cable •Remote control •AC power
cord •Two “AAA” batteries.
Order #
80-7235
Order #
80-7175
Compact Wireless Internet Radio System
ONLY
$99.49
ONLY
$199.00
10" Widescreen TFT Under-The-Cabinet
DVD/CD Player with ATSC Digital TV Tuner
Introducing Coby’s KTFDVD1093 10" widescreen TFT underthe-cabinet DVD/CD player with ATSC digital TV tuner. Enjoy the
convenience of DVD entertainment or digital and standard broadcast
TV in your kitchen or anywhere else in your home. It supports a host of
media formats including DVD, DVD±R/RW, CD, CD-R/RW, JPEG and MP3
compatible. Features: •10" widescreen (16:9) TFT color display •Dual ATSC/
NTSC tuner for digital and standard TV broadcast reception (DTV ready)
•Digital AM/FM radio •Audio/video input jack for video games, VCRs, or
other AV sources •Convenient front panel and on-screen display •Integrated
stereo speakers •Multiple language, subtitle, and camera angle support
•Parental lock control Included accessories: •Mounting kit •Remote
control •Two 1.5V “AAA” batteries •UL AC adapter •AV cable •FM
antenna •AM loop antenna
Order #
80-7230
ONLY
$199.00
Follow us on:
Product Questions Email: [email protected]
3
3
Coby’s DVD765 system brings together high-tech features,
Dolby® Digital audio and stylish design for the ultimate
home theater experience. Compatible with all standard
disc formats, this progressive scan DVD player features
a super-slim design that fits easily into your home. Five
full-range satellite speakers and subwoofer with tuned
port deliver pounding bass and crisp highs: 300W of
dynamic audio in 5.1-channel surround sound. Features:
•5.1-channel progressive scan DVD player •Compact and
slim design •DVD, DVD±R/RW, CD, CD-R/RW, and
JPEG compatible •Dolby® digital decoder •5.1-channel
audio for surround sound systems •Digital and analog AV
outputs for home theater use •NTSC/PAL compatible
•Convenient front panel and on-screen display •Multiple
language, subtitle, and camera angle support •Picture zoom
function •Parental lock control •AC 100~240V automatic
power switching •FCC approved amd ETL listed •Home
theater speakers •5.1-channel surround sound system
with 300W total output •Five full-range satellite speakers
•Subwoofer with tuned port for deep bass response
Included accessories: •Remote control •Two “AAA”
batteries •Speaker cables
Section
32" Widescreen HDTV LCD TV
Coby’s 32" widescreen LCD TV offers a premium
viewing experience, featuring brilliant picture, liquidcrystal display, and dual ATSC/NTSC tuners for great
reception of digital signal (DTV-ready). With two HDMI
inputs and a 15 pin VGA interface, this television is perfect
for use as a television or computer monitor. Integrated fullrange stereo speakers, multiple AV connections, and digital
noise reduction also included. Features: •32" TFT LCD
color display •Dual ATSC/NTSC tuners for digital and
standard TV broadcast reception (DTV-ready) •HDMI
digital connection for perfect AV signal transmission
•HDCP compliance for HDCP content support •AV
input jacks for use with media players, DVR/VCRs,
video games, and more •15 pin VGA interface for use
with computer systems •Full-range stereo speakers (10W)
•Digital comb filter and noise reduction •V-chip parental
control, closed-caption, and electronic program guide
support •Multi-language on-screen display •Wallmountable design (VESA 75mm x 75mm). Included
accessories: •AV cable •Remote control •AC power
cord •Two “AAA” batteries.
Order #
80-7185
ONLY
$399.00
26" Widescreen HDTV LCD Television
Coby’s 26" widescreen LCD TV offers a premium
viewing experience, featuring brilliant picture, liquidcrystal display, and dual ATSC/NTSC tuners for great
reception of digital signal (DTV-ready). With two HDMI
inputs and a 15 pin VGA interface, this television is perfect
for use as a television or computer monitor. Integrated fullrange stereo speakers, multiple AV connections, and digital
noise reduction also included. Features: •26" TFT LCD
color display •Dual ATSC/NTSC tuners for digital and
standard TV broadcast reception (DTV-ready) •HDMI
digital connection for perfect AV signal transmission
•HDCP compliance for HDCP content support •AV
input jacks for use with media players, DVR/VCRs,
video games, and more •15 pin VGA interface for use
with computer systems •Full-range stereo speakers (10W)
•Digital comb filter and noise reduction •V-chip parental
control, closed-caption, and electronic program guide
support •Multi-language on-screen display •Wallmountable design (VESA 75mm x 75mm). Included
accessories: •AV cable •Remote control •AC power
cord •Two “AAA” batteries.
Order #
80-7180
MCMelectronics.com
Email: [email protected]
ONLY
$349.00
page
61
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement