Emerson / Motorola / Force Computers ACC/RTB
Looking for more information?
Visit us on the web at http://www.artisan-scientific.com for more information:
• Price Quotations • Drivers· Technical Specifications. Manuals and Documentation
Artisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
• Fast Shipping and DelIve1y
• Tens of Thousands of In-Stock Items
• Equipment Demos
• Hundreds of Manufacturers Supported
• Leasing / Monthly Rentals
Service Center Repairs
Experienced Engineers and Technicians on staff in our
State-of-the-art Full-Service In-House Service Center Facility
• Consignment
InstraView Remote Inspection
Remotely inspect equipment before purchasing with our
Innovative InstraView-website at http://www.instraview.com
We bUy used equipment! We also offer credit for Buy-Backs and Trade-Ins
Sell your excess. underutilized. and idle used equipment. Contact one of our Customer Service Representatives todayl
Talk to a live person: 88EM38-S0URCE fB88-887-68721 I Contact us by email: [email protected] I Visit our website: http://www.artisan-scientific.com
ACC/RTB-735R2/736R2
Installation Guide
P/N 6806800B23A
July 2006
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Copyright
©Copyright 2006 Motorola GmbH
All rights reserved.
Motorola and the stylized M logo are trademarks of Motorola,Inc., registered in the U.S. Patent and Trademark
Office.
All other product or service names mentioned in this document are the property of their respective owners.
Notice
While reasonable efforts have been made to assure the accuracy of this document, Motorola GmbH assumes no
liability resulting from any omissions in this document, or from the use of the information obtained herein. Motorola reserves the right to revise this document and to make changes from time to time in the content hereof
without obligation of Motorola to notify any person of such revision or changes.
Electronic versions of this material may be read online, downloaded for personal use, or referenced in another
document as a URL to the Motorola Embedded Communications Computing Web site. The text itself may not be
published commercially in print or electronic form, edited, translated, or otherwise altered without the permission of Motorola GmbH.
It is possible that this publication may contain reference to or information about Motorola products (machines
and programs), programming, or services that are not available in your country. Such references or information
must not be construed to mean that Motorola intends to announce such Motorola products, programming, or services in your country.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Contents
Using This Guide
Other Sources of Information
Safety Notes
Sicherheitshinweise
1
Installation
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Comments and Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Standard Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Action Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
On-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Secondary EIDE Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Hard Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Flash Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Floppy Disk Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
Intelligent Peripheral Management Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
iii
PMC I/O Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
SPEAKER, GPO and EXTSMI Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
Installing and Removing the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
CompactPCI Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
Front Panel Connectors and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21
ICMB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22
Ethernet Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
PS/2 Keyboard or Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
Serial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
Reset Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24
iv
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Figures
Installation
Location of IPMB1 and ICMB Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
On-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
EIDE Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Location of CompactFlash Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Inserting a CompactFlash Disk into Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Floppy Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
IPMB1 Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
PMC 1 Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
PMC 2 Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
8-Pin Header Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
Location of Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
Connecting RTB to Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
J3 Connector Pinout (Rows A-C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
J3 Connector Pinout (Rows D and E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
J4 Connector Pinout (Rows A-C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
J4 Connector Pinout (Rows D and E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
J5 Connector Pinout (Rows A-C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
J5 Connector Pinout (Rows D and E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Front Panel Connectors and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21
ICMB Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22
Ethernet Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
PS/2 Keyboard/Mouse Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
USB Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24
COM Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24
Reset Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19
Figure 20
Figure 21
Figure 22
Figure 23
Figure 24
Figure 25
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
v
vi
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Using This Guide
This Installation Guide is intended for users qualified in electronics or electrical engineering. Users must have a working understanding of Peripheral
Component Interconnect (PCI), Compact Peripheral Component Interconnect (CPCI), and telecommunications.
Conventions
Notation
Description
75
All numbers are decimal numbers
x
Generic use of a letter
n
Generic use of numbers
Bold
Character format used to emphasize a word
Italics
Character format for references, table, and figure descriptions
Note:
No danger encountered. Pay attention to important information
marked using this layout
Caution
Possibly dangerous situation: injuries to people or damage to objects
possible
Abbreviations
Abbreviation
Description
CPU
Central Processing Unit
EMI
Electromagnetic Interference
GPO
General Purpose
ICMB
Intelligent Chassis Management Bus
IPMB
Intelligent Peripheral Management Bus
RTB
Rear Transistion Board
SCSI
Small Computer System Interface
SELV
Safety Extra Low Voltages
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
vii
Revision History
viii
SAP No.
Revision
Date
Description
215948
AA
October 2001
Preliminary Installation Guide
215948
AB
May 2002
Added the “Abbreviations” section on
page vii
Rephrased several safety notes in the
“Safety Notes” chapter and the “Sicherheitshinweise” chapter
Added safety note on high humidity and
condensation in “Operation” section on
page xii and “Betrieb” section on page xvi
Deleted information that splitter cable is
part of accessory kit in “Introduction” section on page 1-3 and “PS/2 Keyboard or
Mouse” section on page 1-23
Changed information on PENT/CPCI735R2/736R2 Family board communication from P4 to P3 in “Introduction” section on page 1-3
Removed figure “Board Overview” in
“Introduction” section on page 1-3
Added Figure 1 “Location of IPMB1 and
ICMB Connectors” page 1-3
Deleted EN 50081-2 and EN 50082-2 from
and added EN 55022, EN 55024, and EN
61000-6-2 to the “Standard Compliances”
section on page 1-5
Revised “Action Plan” section on page 1-6
Revised Figure 2 “On-Board Connectors”
page 1-7
Corrected switch settings in “Secondary
EIDE Interface” section on page 1-7,
“Flash Disk” section on page 1-8, and
“Switch Settings” section on page 1-14
Replaced “CompactPCI Flash” with
“CompactFlash” in Figure 4 “Location of
CompactFlash Slot” page 1-9
Added information on connector type in
“Intelligent Peripheral Management Bus”
section on page 1-11
Revised Figure 12 “Connecting RTB to
Backplane” page 1-16
Added RTB-736R2 front panel to
Figure 19 “Front Panel Connectors and
Controls” page 1-21
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
SAP No.
Revision
Date
Description
215948
AB
May 2002
Added information on cable in the “ICMB
Connector” section on page 1-22
Added information on cable accessory kit
in the “PS/2 Keyboard or Mouse” section
on page 1-23
Added note in the “Serial Connectors”
section on page 1-23
217490
AA
August 2002
Corrected figures in “CompactPCI Connectors” page 1-18
227191
AA
September
2005
Changed manual to Motorola-style
6806800B23
A
July 2006
Changed e-mail address for reader comments
Modified “Standard Compliances” section on page 1-5
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
ix
Other Sources of Information
For further information refer to the PENT/CPCI-735R2/736R2 Family Installation Guide
x
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Safety Notes
This section provides safety precautions to follow when installing, operating, and maintaining the ACC/RTB-735R2/736R2.
We intend to provide all necessary information to install and handle the
ACC/RTB-735R2/736R2 in this Installation Guide. However, as the product is complex and its usage manifold, we do not guarantee that the given
information is complete. If you need additional information, ask your Motorola representative.
The ACC/RTB-735R2/736R2 has been designed to meet the standard
industrial safety requirements. It must not be used except in its specific
area of office telecommunication industry and industrial control.
Only personnel trained by Motorola or persons qualified in electronics
or electrical engineering are authorized to install, maintain, and operate
the ACC/RTB-735R2/736R2. The information given in this manual is
meant to complete the knowledge of a specialist and must not be taken as
replacement for qualified personnel.
EMC
The board has been tested in a Standard Motorola system and found to
comply with the limits for a Class A digital device in this system, pursuant to part 15 of the FCC Rules respectively EN 55022 Class A. These limits are designed to provide reasonable protection against harmful
interference when the system is operated in a commercial, business or
industrial environment.
The board generates and uses radio frequency energy and, if not
installed properly and used in accordance with this Installation Guide,
may cause harmful interference to radio communications. Operating the
system in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own
expense.
If boards are integrated into open systems, always cover empty slots.
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
xi
Switch Settings
The RTB provides the configuration switch SW3 which functions are
reserved. The switches have to be set to OFF to avoid damage to attached
PMC modules. Therefore, never change the settings of SW3.
Installation
Electrostatic discharge and incorrect board installation and removal can
damage circuits or shorten their life. Therefore:
• Before installing or removing the board, read the “Action Plan” section on page 1-6.
• Before touching boards or electronic components, make sure that you
are working in an ESD-safe environment.
• When plugging the board in or removing it, do not press on the front
panel but use the handles.
• Before installing or removing an additional device or module, read
the respective documentation.
• Make sure that the board is connected to the CompactPCI backplane
via all assembled connectors and that power is available on all power
pins.
• Only install and use the ACC/RTB-735R2/736R2 with CPU boards
especially designed for it. Otherwise, both the CPU board and the
RTB may be destroyed.
• Make sure to use the backplane’s rear slot position only.
Operation
While operating the board ensure that the environmental and power
requirements are met.
When operating the board in areas of electromagnetic radiation ensure
that the board is bolted on the CompactPCI system and the system is
shielded by enclosure.
Make sure that contacts and cables of the board cannot be touched while
the board is operating.
Do not operate the product outside the specified environmental limits.
High humidity and condensation may cause short circuits. Make sure the
product is completely dry and there is no moisture on any surface before
applying power. Do not operate the product below 0°C.
xii
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Replacement and Expansion
Only replace or expand components or system parts with those recommended by Motorola. Otherwise, you are fully responsible for the impact
on EMC and the possibly changed functionality of the product.
Check the total power consumption of all components installed (see the
technical specification of the respective components). Ensure that any
individual output current of any source stays within its acceptable limits
(see the technical specification of the respective source).
If more than two IDE devices are connected to the IDE bus, the bus is not
able to recognize all of the devices and the RTB might not start correctly.
Therefore, only connect up to two devices to the secondary EIDE interface on the RTB.
If the secondary EIDE interface on the RTB is connected to an external
device the PENT/CPCI-735R2/736R2 is hot-swappable but data may get
lost. Therefore, always save data on disk before installing or removing
the base board under hot-swap conditions.
RJ-45 Connector
The RTB provides several RJ-45 connectors which commonly serve as
different interfaces (RS-485, twisted pair Ethernet and telephone). Connecting different interfaces (e.g. Ethernet and RS-485) may damage the
board. Therefore, make sure that you only connect matching interfaces.
Furthermore, take note of the following:
• Clearly mark TPE connectors near your working area as network connectors.
• Connect TPE bushing of the system to safety extra low voltages
(SELV) circuits only.
• Make sure that the length of the electric cable connected to a TPE
bushing does not exceed 100 meter.
Environment
Always dispose of old boards according to your country’s legislation, if
possible always in an environmentally acceptable way.
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
xiii
xiv
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Sicherheitshinweise
Dieser Abschnitt enthält Sicherheitshinweise, die bei Einbau, Betrieb und
Wartung des ACC/RTB-735R2/736R2 zu beachten sind.
Wir sind darauf bedacht, alle notwendigen Informationen zum Einbau und
zum Umgang mit dem ACC/RTB-735R2/736R2 in diesem Handbuch
bereit zu stellen. Da es sich bei dem ACC/RTB-735R2/736R2 um ein
komplexes Produkt mit vielfältigen Einsatzmöglichkeiten handelt, wird die
Vollständigkeit der im Handbuch enthaltenen Informationen nicht
garantiert. Falls Ihnen Informationen fehlen sollten, wenden Sie sich bitte
an Ihren Vertreter von Motorola.
Das ACC/RTB-735R2/736R2 erfüllt die von der Industrie geforderten
Sicherheitsvorschriften und darf ausschließlich für Anwendungen in der
Telekommunikationsindustrie und in Zusammenhang mit
Industriesteuerungen verwendet werden.
Einbau, Wartung und Betrieb dürfen nur von durch Motorola
ausgebildetem oder im Bereich Elektronik oder Elektrotechnik
qualifiziertem Personal durchgeführt werden. Die in diesem Handbuch
enthaltenen Informationen dienen ausschließlich dazu, das Wissen von
Fachpersonal zu ergänzen, können dieses jedoch nicht ersetzen.
EMV
Das Board wurde in einem Motorola Standardsystem getestet. Es erfüllt
die für digitale Geräte der Klasse A gültigen Grenzwerte in einem
solchen System gemäß den FCC-Richtlinien Abschnitt 15 bzw. EN 55022
Klasse A. Diese Grenzwerte dienen dazu, einen angemessenen Schutz
vor Störstrahlung beim Betrieb des Boards in Geschäfts-, Gewerbesowie Industriebereichen zu gewährleisten.
Das Board arbeitet im Hochfrequenzbereich und erzeugt Störstrahlung.
Bei unsachgemäßem Einbau und anderem als in diesem Handbuch
beschriebenen Betrieb können Störungen im Hochfrequenzbereich
auftreten. Warnung! Dies ist eine Einrichtung der Klasse A. Diese
Einrichtung kann im Wohnbereich Funkstörungen verursachen. In
diesem Fall kann vom Betreiber verlangt werden, angemessene
Maßnahmen durchzuführen.
Wenn Sie Boards in offene Systeme einbauen, schirmen Sie freie
Steckplätze mit einer Blende ab.
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
xv
Schaltereinstellungen
Auf dem RTB befindet sich der Schalter SW3, dessen Funktionen
reserviert sind. Schalter SW3 darf nicht auf ON gestellt werden, damit
installierte PMC Module nicht beschädigt werden. Ändern Sie deshalb
niemals die Standardeinstellung von SW3.
Installation
Elektrostatische Entladung und unsachgemäßer Ein- und Ausbau des
Boards kann Schaltkreise beschädigen oder ihre Lebensdauer verkürzen.
Deswegen sind folgende Punkte vor der Installation zu überprüfen:
• Lesen Sie vor Ein- oder Ausbau des Boards den Abschnitt “Action
Plan” auf Seite 1-6.
• Bevor Sie Boards oder elektronische Komponenten berühren,
vergewissern Sie sich, dass Sie in einem ESD-geschützten Bereich
arbeiten.
• Drücken Sie bei Ein- oder Ausbau des Boards nicht auf die
Frontplatte, sondern benutzen Sie die Griffe.
• Lesen Sie vor dem Ein- oder Ausbau von zusätzlichen Geräten oder
Modulen das jeweilige Benutzerhandbuch.
• Vergewissern Sie sich, dass das Board über alle Stecker an die
CompactPCI Backplane angeschlossen ist und Spannung an allen
Versorgungskontakten anliegt.
• Installieren und betreiben Sie das ACC/RTB-735R2/736R2 nur mit
CPU Boards die ausdrücklich dafür hergestellt wurden. Anderenfalls
können sowohl das CPU Board als auch das RTB zerstört werden.
• Benutzen sie nur rückseitige Steckplätze.
Betrieb
Achten Sie darauf, dass die Umgebungs- und die
Leistungsanforderungen während des Betriebs eingehalten werden.
Wenn Sie das Board in einer Umgebung mit elektromagnetischer
Strahlung betreiben, stellen Sie sicher, dass das Board mit dem
CompactPCI System verschraubt ist und das System durch ein Gehäuse
abgeschirmt wird.
Stellen Sie sicher, dass Anschlüsse und Kabel des Boards während des
Betriebs nicht berührt werden können.
xvi
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Nehmen Sie das Produkt nicht in Betrieb, wenn die
Umgebungsgrenzwerte nicht eingehalten werden können. Hohe
Luftfeuchtigkeit und Kondensation können zu Kurzschlüssen führen.
Stellen vor der Stromzufuhr Sie sicher, dass das Produkt vollkommen
trocken ist und sich keine Feuchtigkeit auf der Oberfläche befindet.
Betreiben Sie das Produkt nicht bei Temperaturen unter 0°C.
Austausch und Erweiterung
Verwenden Sie bei Austausch oder Erweiterung nur von Motorola
empfohlene Komponenten und Systemteile. Andernfalls sind Sie für
mögliche Auswirkungen auf EMV und geänderte Funktionalität des
Produktes voll verantwortlich.
Überprüfen Sie die gesamte aufgenomme Leistung aller eingebauten
Komponenten (siehe die technischen Daten der entsprechenden
Komponente). Stellen Sie sicher, dass die Ausgangsströme jedes
Verbrauchers innerhalb der zulässigen Grenzwerte liegen (siehe die
technischen Daten des entsprechenden Verbrauchers).
Werden mehr als zwei IDE Komponenten and den IDE Bus
angeschlossen, kann der Bus nicht alle Komponenten erkennen und das
RTB wird möglicherweise nicht korrekt hochgefahren. Schließen Sie
deshalb ausschließlich bis zu zwei Komponenten and die zweite EIDE
Schnittstelle auf dem RTB an.
Ist die zweite EIDE Schnittstelle auf dem RTB mit einer externen
Komponente verbunden, so ist das PENT/CPCI-735R2/736R2 zwar HotSwap fähig, es können jedoch Daten verloren gehen. Speichern Sie
deshalb immer alle Daten ab, bevor Sie das CPU Board im laufenden
System ein- oder ausbauen.
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
xvii
RJ-45 Stecker
Das RTB stellt einige RJ-45 Stecker zur Verfügung, die für verschiedene
Schnittstellen verwendet werden können. Werden unterschiedliche
Schnittstellen miteinander verbunden (z.B. Ethernet und RS-485), kann
das Board beschädigt werden. Verbinden Sie deswegen ausschließlich
übereinstimmende Schnittstellen. Beachten Sie darüber hinaus:
• Kennzeichnen Sie TPE-Anschlüsse in der Nähe Ihres Arbeitsplatzes
deutlich als Netzwerkanschlüsse.
• Schließen Sie an TPE-Buchsen ausschließlich SELV-Kreise
(Sicherheitskleinspannungsstromkreise) an.
• Stellen Sie sicher, dass die Länge der an einer TPE-Buchse
angeschlossenen Leitung nicht mehr als 100 Meter beträgt.
Umweltschutz
Entsorgen Sie alte Boards gemäß der in Ihrem Land gültigen
Gesetzgebung, wenn möglich immer umweltfreundlich.
xviii
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1
Installation
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
Introduction
Introduction
The ACC/RTB-735R2/736R2 is a rear transition board (RTB) which provides easy access to I/O signals of the PENT/CPCI-735R2/736R2 Family
boards via the CompactPCI backplane.
The backplane I/O signals are available at connectors J3, J4 and J5. In order
to connect the system management bus 1 and the chassis management bus
to the PENT/CPCI-735R2/736R2, the ACC/RTB-735R2/736R2 provides
the Intelligent Platform Management Bus 1 (IPMB1) and Intelligent Chassis
Management Bus (ICMB) connectors.
Figure 1:
Location of IPMB1 and ICMB Connectors
The two variants RTB-735R2 and RTB-736R2 differ in the Ethernet routing.
On the RTB-735R2, the Ethernet signals are routed to the front panel. On
the RTB-736R2, the Ethernet signals are routed to the backplane. The RTB735R2 can be used with base board variant CPCI-735, the RTB-736R2 can be
used with base board variants CPCI-735A and CPCI-736.
Note: If you use other CPU board and RTB combinations than the ones
listed above, the Ethernet interfaces will not work.
The RTB may be delivered as part of an accessory kit compiled for CPU
boards or as part of a system design.
Check that the items listed were shipped together with the accessory kit:
• Rear transition board ACC/RTB-735R2/736R2
• Installation Guide
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1-3
Introduction
Installation
If delivered as part of a system design, the RTB is already installed in the
system. For information on the system connectors available for user-defined system configuration, refer to the respective System’s Guide. The cabling of all other connectors of the RTB must remain as configured at
system delivery.
Comments and Suggestions
We welcome and appreciate your comments on our documentation. We
want to know what you think about our manuals and how we can make
them better. Mail comments to:
• Motorola GmbH
Embedded Communications Computing
Lilienthalstrasse 15
85579 Neubiberg
Germany
• [email protected]
In all your correspondence, please list your name, position, and company.
Be sure to include the title, part number, and revision of the manual and tell
how you used it.
1-4
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
Standard Compliances
Standard Compliances
The ACC/RTB-735R2/736R2 meets the following standards:
Standard
Description
EN 60950-1
IEC 60950-1
CSA 60950-1
UL/cUL 60950-1
(predefined Motorola system)
Legal safety requirements
EN 55022
EN 55024
EN 61000-6-2
FCC Part 15 Class A
EMC requirements on system level
ANSI/IPC-A-610 Rev.C Class 2
ANSI/IPC-7711
ANSI/IPC-7721
ANSI-J-001...003
Manufacturing standards
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1-5
Action Plan
Installation
Action Plan
To install the RTB, the steps shown in the flow chart are necessary.
1-6
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
On-Board Connectors
On-Board Connectors
The ACC/RTB-735R2/736R2 provides the following on-board connectors:
Figure 2:
On-Board Connectors
Secondary EIDE Interface
The RTB provides the secondary EIDE interface of the PENT/CPCI735R2/736R2 via CompactPCI connector J5. The secondary EIDE interface
can be used for:
• one EIDE device
• two EIDE devices
• one EIDE device and one flash disk
The flash disk is the slave per default. To use the flash disk as master set
SW4-2 to ON.
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1-7
On-Board Connectors
Caution
Installation
• If more than two IDE devices are connected to the IDE bus, the bus is
not able to recognize all of the devices and the base board might not
start correctly. Therefore, only connect up to two devices to the secondary EIDE interface on the RTB.
• If the secondary EIDE interface on the RTB is connected to an external
device the PENT/CPCI-735R2/736R2 is hot-swappable but data may
get lost. Therefore, always save data on disk before installing or
removing the base board under hot-swap conditions.
Hard Disk Drives
Hard disk drives are connected to the secondary EIDE interface via an
EIDE connector. It is implemented with a 40-pin 2.54-mm pin-pitch connector with eject levers. The following connector pinout shows how the pins
are assigned.
Figure 3:
EIDE Connector Pinout
Flash Disk
If a flash disk is connected, it is the slave per default. To use the flash disk
as master set SW4-2 to ON.
The flash disk is connected to the secondary EIDE interface via a flash disk
holder with an ejector at the front panel.
1-8
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
On-Board Connectors
The CompactFlash slot is integrated into the front panel to allow the installation and/or removal of a CompactFlash card without having to remove
the board from the system.
Figure 4:
Location of CompactFlash Slot
Note: CompactFlash disks of types I and II are supported.
Installation
Procedure
1. Check system documentation for all steps required before turning
off CPU board’s power
2. Take those steps
3. Turn off CPU board’s power
4. Check that disk’s connectors face CompactFlash socket
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1-9
On-Board Connectors
Installation
Note: In order to configure the card to the supported true-IDE mode, the
card must already be inserted when the board’s power is turned on. Inserting the CompactFlash while the board’s power is still on will configure the CompactFlash disk to PC Card ATA mode which is not supported
by the CPU board. If you have accidentally inserted the card while the
board’s power has been turned on, you need to remove the card again
and reinsert it with the board’s power turned off.
5. Plug CompactFlash disk into socket
The CompactFlash disk is connected to the socket if the ejector pin
on the front panel is pushed out of the recess.
TM
CO
AC
MP
LA
TF
SH
Figure 5: Inserting a CompactFlash Disk into Socket
6. Turn on CPU board’s power
Removal Procedure
1. Turn off CPU board’s power
2. Press ejector pin
The ejector pin loosens the CompactFlash disk from the socket.
3. Remove CompactFlash disk from RTB
4. Turn on CPU board’s power
1 - 10
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
On-Board Connectors
Floppy Disk Drive
Note: The PENT/CPCI-735R2/736R2 Family boards are not hot-swappable if a floppy disk drive is connected to the RTB.
The floppy disk drive connector is a 34-pin 2.54-mm pin-pitch connector
with eject levers. The following connector pinout shows how the pins are
assigned.
Figure 6:
Floppy Connector Pinout
Intelligent Peripheral Management Bus
The intelligent peripheral management bus (IPMB1) can be used to connect,
control and monitor critical components such as power supply units, fans
etc. It provides information on e.g. the system inventory, temperature, or
the voltage level.
The IPMB1 of the PENT/CPCI-735R2/736R2 is routed to the CompactPCI
connector J5. In addition, the RTB provides the IPMB1 connector to attach
the system management bus to the PENT/CPCI-735R2/736R2 via J4. According to PICMG specification 2.9, the 53398-0590 connector from Molex is
used on the RTB.
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1 - 11
On-Board Connectors
Installation
The following connector pinout shows how the pins are assigned.
Figure 7:
IPMB1 Connector Pinout
PMC I/O Signals
The PMC I/O signals of the PMC slots 1 and 2 of the CPU board are routed
to two 64-pin connectors which pinouts are shown in the figures below.
Figure 8:
1 - 12
PMC 1 Connector Pinout
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
On-Board Connectors
Figure 9:
PMC 2 Connector Pinout
SPEAKER, GPO and EXTSMI Signals
The General Purpose (GPO), Speaker and EXTSMI_N signals are accessible
via an 8-pin 2.54-mm pin-pitch header. The following connector pinout
shows how the pins are assigned.
Figure 10: 8-Pin Header Pinout
Note: The speaker signals are only accessible on base boards with connector P4 assembled.
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1 - 13
Switch Settings
Installation
Switch Settings
Caution
The RTB provides the configuration switch SW3 which functions are
reserved. The switches have to be set to OFF to avoid damage to attached
PMC modules. Therefore, never change the settings of SW3.
Figure 11: Location of Switches
Table 1:
Switch
Switch Settings
No.
Description
1
Reserved, must be OFF (default)
2
Reserved, must be OFF (default)
1
Reserved, must be OFF (default)
2
ON: Flash disk is master
OFF: Flash disk is slave (default)
SW3
SW4
1 - 14
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
Installing and Removing the Board
Installing and Removing the Board
Caution
• Only install and use the ACC/RTB-735R2/736R2 with CPU boards
especially designed for it. Otherwise, both the CPU board and the
RTB may be destroyed.
• Always turn off system power before RTB installation or removal.
• Make sure to use the backplane’s rear slot position only.
• Before touching integrated circuits, make sure that you are working
in an ESD-safe environment.
• When plugging the board in or removing it, do not press on the front
panel but use the handles.
Installation Procedure
Connect interface cables to the on-board connectors first since it may be difficult to reach them when the RTB is already installed into the CompactPCI
backplane. Connect interface cables to the front panel connectors after the
RTB installation.
1. Check all installed boards for steps to be taken before turning off
system power
2. Take those steps
3. Turn off system power
4. Check system documentation for switch settings
Caution
The RTB provides the configuration switch SW3 which functions are
reserved. The switches have to be set to OFF to avoid damage to attached
PMC modules. Therefore, never change the settings of SW3.
5. Make sure that switches are set to OFF (default position)
6. Connect interface cables to on-board connectors
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1 - 15
Installing and Removing the Board
Installation
Note: When inserting the RTB make sure not to bend any pins.
7. Insert RTB carefully from rear into same slot as the CPU board
Figure 12: Connecting RTB to Backplane
8. Press handles inwards to lock RTB on CompactPCI rack
9. Fasten RTB with screws
10. Plug in interface cables into front panel connectors, if applicable
(see “Front Panel Connectors and Controls” page 1-21)
11. Turn on system power
1 - 16
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
Installing and Removing the Board
Removal Procedure
1. Check all installed boards for steps to be taken before turning off
power
2. Take those steps
3. Turn off system power
4. Unfasten screws of front panel until RTB is detached from rack
frame
5. Unlock handles by pressing on red handle buttons
6. Press handles outwards to disconnect RTB from backplane
7. Carefully remove RTB from slot without bending any pins
8. Turn on system power
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1 - 17
CompactPCI Connectors
Installation
CompactPCI Connectors
The RTB provides the CompactPCI connectors J3, J4 and J5. The following
connector pinouts show how the pins are assigned.
Figure 13: J3 Connector Pinout (Rows A-C)
Figure 14: J3 Connector Pinout (Rows D and E)
1 - 18
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
CompactPCI Connectors
Figure 15: J4 Connector Pinout (Rows A-C)
Figure 16: J4 Connector Pinout (Rows D and E)
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1 - 19
CompactPCI Connectors
Installation
Figure 17: J5 Connector Pinout (Rows A-C)
Figure 18: J5 Connector Pinout (Rows D and E)
1 - 20
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
Front Panel Connectors and Controls
Front Panel Connectors and Controls
The ACC/RTB-735R2/736R2 front panels provide the following connectors
and controls:
RTB-735R2
RTB-736R2
Figure 19: Front Panel Connectors and Controls
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1 - 21
Front Panel Connectors and Controls
Caution
Installation
The RTB provides several RJ-45 connectors which commonly serve as
different interfaces (RS-485, twisted pair Ethernet and telephone). Connecting different interfaces (e.g. Ethernet and RS-485) may damage the
board. Therefore, make sure that you only connect matching interfaces.
Furthermore, take note of the following:
• Clearly mark TPE connectors near your working area as network connectors.
• Connect TPE bushing of the system to safety extra low voltages
(SELV) circuits only.
• Make sure that the length of the electric cable connected to a TPE
bushing does not exceed 100 meter.
ICMB Connector
The ICMB connector can be used to attach the PENT/CPCI-735R2/736R2
via the RTB to other systems based on the Intelligent Platform Management
Interface (IPMI). In order to monitor the overall system, the chassis can be
connected via the CPU board’s RTBs. The IPMI signals are routed from the
CPU board via the backplane to the RTB and are then available on the
ICMB connector.
The ICMB bus needs to be connected via a multi-drop cable or via star topology.
The following figure shows how the pins are assigned.
Figure 20: ICMB Connector Pinout
1 - 22
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installation
Front Panel Connectors and Controls
Ethernet Interfaces
Note: The two Ethernet interfaces on the front panel of the RTB-735R2
are only available if the base board variant CPCI-735 is used.
The following connector pinout applies to both Ethernet interfaces.
Figure 21: Ethernet Connector Pinout
PS/2 Keyboard or Mouse
By using a keyboard/mouse splitter cable you can use a PS/2 keyboard
and a PS/2 mouse at the same time. The cable is included in the
PENT/CPCI-7xx/CABLE-AccKit (P/N 110130).
Figure 22: PS/2 Keyboard/Mouse Connector Pinout
Serial Connectors
Via the three COM connectors three serial devices and via the USB connector one USB device (e.g. USB keyboard, USB mouse) can be connected.
Note: The three COM ports are only available if the RTB-735R2/736R2 is
used together with the CPCI-735R3/736R2.
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
1 - 23
Front Panel Connectors and Controls
Installation
The following figures show how the pins are assigned.
Figure 23: USB Connector Pinout
Figure 24: COM Connector Pinout
Reset Key
The ACC/RTB-735R2/736R2 provides a reset key on the front panel to execute a reset on the PENT/CPCI-735R2/736R2 Family boards in systems
where the system’s back can be accessed easier than the front. The way the
reset is performed can be determined by adapting the settings in the Reset
Control registers of the CPU board or by changing the settings of the
switches on the CPU board (see the PENT/CPCI-735R2/736R2 Installation
Guide). A reset on the CPU board has no consequences for the RTB.
Figure 25: Reset Key
1 - 24
ACC/RTB-735R2/736R2
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Looking for more information?
Visit us on the web at http://www.artisan-scientific.com for more information:
• Price Quotations • Drivers· Technical Specifications. Manuals and Documentation
Artisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
• Fast Shipping and DelIve1y
• Tens of Thousands of In-Stock Items
• Equipment Demos
• Hundreds of Manufacturers Supported
• Leasing / Monthly Rentals
Service Center Repairs
Experienced Engineers and Technicians on staff in our
State-of-the-art Full-Service In-House Service Center Facility
• Consignment
InstraView Remote Inspection
Remotely inspect equipment before purchasing with our
Innovative InstraView-website at http://www.instraview.com
We bUy used equipment! We also offer credit for Buy-Backs and Trade-Ins
Sell your excess. underutilized. and idle used equipment. Contact one of our Customer Service Representatives todayl
Talk to a live person: 88EM38-S0URCE fB88-887-68721 I Contact us by email: [email protected] I Visit our website: http://www.artisan-scientific.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement